DIY: Volvo Shifter Button Replacement

Video tutorial on how to replace the automatic shift knob button on a Volvo. Over time these can crack or break which prevents the button from releasing and will stick inside the knob assembly. Purchasing a new shifter knob can be very expensive and if you decide to go with the used route, you may run into the same issue. A new push button cannot be purchased from the dealer, but it can be purchased from online from eBay or IPD. This particular replacement came from eBay.
Website: 4diyers.com
Facebook: / 4diyers
Google Plus: plus.google.com/+4DIYers
Twitter: / 4diyers
Instagram: / 4diyers
Tumblr: / 4diyers
Pintrest: / 4diyers
Tools/Supplies Needed:
-new replacement button
-standard/flat screwdriver
-needle nose pliers
-factory Volvo automatic shifter knob
Procedure:
-first the knob needs to be removed from the vehicle for replacement
-if the button is stuck inside the shifter knob, use a screwdriver to push a plastic tab inside the shifter knob
-this will help assist the button out
-once the button is out, then pull the rest out with your fingers
-gently assist it out as most of the assembly is plastic and we do not want to risk breaking anything
-this button does have a very tight fit by the way
-if it is broken on the bottom like the one shown in the video, then you can pull the button further out and slide the pin out of the slot
-if not, then using a small standard screwdriver or needle nose pliers, the pin will need to be pulled from the alignment holes on the button
-remove the new button and spring from the package
-ensure the existing pins are in the correct location
-install the new spring
-the black tab may need to be pushed into the shifter knob a little
-clip the new button into place on the bottom side
-install the metal pin
-it does fit tighter into the button holes for the pin
-when pushing in the pin, use your finger as a backer so it doesn’t put excessive strain on the plastic tab so we don’t risk breaking it
-now push the button back into place
-for this knob I did find it a little harder to snap back into place
-reinstall the shifter knob back onto your vehicle
Thank you to all those who watch my videos and support my content. Don't forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!
© 4DIYers 2013
All Rights Reserved
No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.

[@satwinosatwino2107]

Had a broken button....always jammed into the shifter so you cant get the keys out of the ignition when parked.....all fixed with the help of this videko.....thanks very much. happy V40 owner in the UK.....

[@4DIYers]

Awesome to hear and glad to help out :)

[@miracleokeke3145]

Hello how are you I sell volvo spare parts in South Sudan will love to work with you

[@JandaliaTheFirst]

Great video. Thank you so much.

[@4DIYers]

Always happy to help :)

[@bruceargue7515]

Very good. I found that my spring was missing but I managed to repair it by adapting a clothes peg spring :-)

[@4DIYers]

Thank you and great tip as well! I have had people asking in the past what to use for a spring if it's missing.

[@Stratoszero]

I need to do this, looks fiddly! I hope I dont break the new part. 🙁 Any idea why the originals break? Should they be lubed with silicon spray every now and again, or is the plastic just rubbish?

[@robbiewilson157]

The video shows the button stuck in and when your repair was complete the button seemed to be spring loaded to pop out. Which way should the spring be? Should the button be sprung so it stays in or popped out? I know common sense says the spring should keep the button pressed out, but I am thinking it's kind of irrelevent since the shift itself is also spring loaded. I have mine off and would like the spring on the right way before I re install. Thanks!

[@4DIYers]

The button should be out when it is correctly working. A broken button tends to get stuck inside as it doesn't sit straight and wedges. Don't forget to subscribe :)

[@FreeVerminControl]

It seems the cranked bit goes inside and the straight bit against the button.

[@user-gu6yj6dv5j]

Hola buen día te escribo desde mexico podría ser tan amable en enviarme el enlace para comprarlo en eBay te agradecería mucho y gracias por ese vídeo vídeo está muy bueno

[@Theonlymayz]

What's the exact spring location

[@Theonlymayz]

I lost the pins what should I do I can't find them anywhere

[@dlnf1215]

Where to buy button?

[@4DIYers]

Ebay or IPDUSA.

[@dlnf1215]

4DIYers thank you sir.

[@aaronmarcel5026]

I’ve seen this on several models, seems like Volvo should just make a more durable shifter.. Makes me not want to purchase one, so many common issues.....