DIY Walnut Epoxy Cutting Board: How to Make a Durable and Stylish Kitchen Essential

Check out my latest video and go behind the scenes as I craft a stunning black walnut cutting board. Watch as I carefully select the perfect piece of wood, and then spend hours sanding and finishing each piece to perfection. See the attention to detail and hard work that goes into creating a true masterpiece. From start to finish, this cutting board is a labor of love and a beautiful addition to any kitchen. Don't forget to like and subscribe for more videos showcasing the art of woodworking
Items used in my builds:
Nikon D7500 Camera amzn.to/3D6QhBe
Nikon 35mm Lens amzn.to/3RfqPzH
Nikon 50mm Lens amzn.to/3WxqTvz
Ridgid Cordless 1/4 Router amzn.to/3JarUqq
Ridgid 13" Planer amzn.to/3R1ZdOn
Ridgid Miter Saw amzn.to/3XPlZuL
Ridgid Drill amzn.to/3DaAn93
Mirka Deros Sander amzn.to/3j26hhm
Festool Extractor amzn.to/3kCKYmU
Wen Track Saw amzn.to/3J95gyx
VonHaus Chisel Set amzn.to/3XyrlLc
Wire Wheel Brush Set amzn.to/400nJDE
Kutzall Taper Rotary Burr amzn.to/3JbjDCE
Ice Epoxy amzn.to/3WxT8Kk
Starbond CA Glue amzn.to/3J9RziY
Odies Oil amzn.to/3XyrQVB
Non Scratch Woven Pads amzn.to/3J9eKtt
Terry Towel amzn.to/3Wvx4QS
Thanks for tuning in to my channel! if you liked the video please like, comment, share & subscribe!!
You can follow on other social media platforms
Instagram @jaredcoreyconcepts
Facebook @jaredcoreyconcepts
Tiktok @jaredcoreyconcepts
Etsy etsy.me/2L3dThY
www.jaredcoreyconcepts.com
Some tools used are linked below.
( affiliate link )
www.amazon.com/shop/jaredcore...

[@Robert_Bubba_Baker]

Great job done.

[@jaredcoreyconcepts]

Thank you!! 😃😃

[@Robert_Bubba_Baker]

@@jaredcoreyconcepts your welcome

[@rosemckain]

Nephew: This video is amazing. You make unbelievably beautiful pieces.

[@jaredcoreyconcepts]

Thanks so much rose!

[@thomascamacho1209]

Best epoxy “food friendly “ for a walnut cutting board? Thnaks

[@jaredcoreyconcepts]

Superclear!

[@therebellion6911]

There is none. They are all food safe as in a charcuterie board as in food contact but none are good for cutting board as in food grade. You're not meant to eat epoxy so you dont cut on it. The title needs to be changed. Ive never seen anyone that works extensively with epoxy recommend this. This was actually discussed by the creator in the first post so they are aware. There is epoxy all over that board and would be hard to miss cutting on

[@derrickharris7306]

@@therebellion6911 It still would have been a stoked board if he would have only used the edges behind the cutting board, or used the color in the juice groove as I have seen many professional cutting board experts. It's still beautiful, but is should not be cut on.

[@waterlilly62lori]

LOVE this video. You show start to finish and I love that. Also not to wordy or goofy. I'm just starting out, so I appreciate any tips and tricks. Love the way you brand your product too. How do you get those?. More "how to's" PLEASE!

[@jaredcoreyconcepts]

Thanks so much for the kind words!! I plan on making a lot more videos this year in 2024!

[@pa7422]

Thx for sharing.

[@jaredcoreyconcepts]

Absolutely!! Thanks for watching! 🙌

[@amritbhathal1487]

Love the logo on that coin! If you do not mind! Where did you get that!! Amazing work!

[@chuckccfd9]

Nice work the color choice was spot on

[@jaredcoreyconcepts]

Thank you ! 🙌

[@waterlilly62lori]

Jared, you use a forstner bit to create a space for your emblem. How do you determine how deep to drill?

[@jaredcoreyconcepts]

Set a stop on the drill press!

[@marsufia21]

He’s a big boy 🔥 🔥 🔥

[@jaredcoreyconcepts]

Monster!!!!! 💪

[@garywagner2179]

Thanks I had a terible time with small little holes in my epoxy cutting boards, as a newly retired woodworker I was trying to fill the lil holes with drips of epoxy ( did not work ) in searching youtube found you . Thanks again have 3 boards working now - will try with CA.

[@jaredcoreyconcepts]

You can do it!

[@mitya_kononov]

Looks awesome! Thank you for sharing. I’m trying to find a solution for my new board little holes. Is it food safe to use ca glue?

[@jaredcoreyconcepts]

Yes as long as you sand and clean and use food safe oil/wax for finish!

[@MrBackdaddy]

Jared, Great video short and sweet and to the point. The piece turned out great! Where do you get your medal medallions made? They look great! Keep up the good work!

[@jaredcoreyconcepts]

Thanks so much! Check out von_hanke on Instagram! Great product and fast turn around!

[@Julmusikful]

Wow! What great inspiration this is. Can you please advise what you use to fill in the smaller holes after the epoxy pour has been done. I am in the midst of making my 1st board and have areas to fill! Paul- UK

[@jaredcoreyconcepts]

Thank you! I use starbond ca blue to fill the small voids! Awesome have fun and enjoy the process!

[@anthonygoines1466]

Where did you get your logo Piece

[@waterlilly62lori]

Where do you find this kind of wood?

[@jamesrachal6762]

Came across your video, and it turned out beautiful! Just a question. If it's epoxy, how does it not get scratched up by a knife during use? Or is it just decorative?

[@jaredcoreyconcepts]

Thanks James! Appreciate it! I recommend to people who buy boards with epoxy to not cut on epoxy section, however this board is huge! The section of walnut is more than enough space to cut on!

[@waterlilly62lori]

Why toward the end, did you use the tablesaw and mitre saw?

[@jaredcoreyconcepts]

Just personal preference, I like the mitre for making cuts but this cutting board was so large for the longer end I had to run it through the table saw.

[@waterlilly62lori]

Could you tell me where you got your square for the corners?

[@jaredcoreyconcepts]

Amazon! I can send you a link!

[@jaredcoreyconcepts]

amzn.to/4azxLQz

[@waterlilly62lori]

Where or how did you have your emblems made?

[@jaredcoreyconcepts]

Look up von_hanke on Instagram/Etsy

[@waterlilly62lori]

When you're making the cut for your emblem, how do you judge the depth?

[@jaredcoreyconcepts]

@@waterlilly62lori set a stop on the drill press

[@TheCinderina]

where can you buy a custom coin like that?

[@jaredcoreyconcepts]

Look up von_hanke on Instagram!

[@waterlilly62lori]

How much do you sell a piece like this for?

[@jaredcoreyconcepts]

This was priced at $350. Walnut burl and amount of epoxy in this added up fast.

[@waterlilly62lori]

I bet! It's beautiful

[@waterlilly62lori]

Did you sell it?​@@jaredcoreyconcepts

[@guillaumevassail1816]

it s beautifull, but when you cut something on, you don t fck the epoxy or wood ??

[@jaredcoreyconcepts]

I tell customers to not cut on epoxy, just the wood section!

[@Alex-oz6sf]

​@@jaredcoreyconcepts definitely defeats the purpose of having a cutting board if you're reduced to cutting on a small section of the board

[@jaredcoreyconcepts]

@@Alex-oz6sf wrong. This is a huge cutting board still plenty of space to use.