Trash Wood To Treasure - Epoxy & Copper Cutting Board | Serving Board

Epoxy resin and copper handled walnut serving board/cutting board/ charcuterie board. The latest in my trash wood to treasure series is this cutting board (aka serving board or charcuterie board) made from leftover walnut slab off cuts, white pearl epoxy resin, and copper handles with epoxy end caps. I cut recesses for whiskey glasses, cheeses, and accompaniments. I made sure to leave plenty of the wood surface for cutting as well, but this will primarily be a cheese board for us. Finally a project I get to keep and use often! Thanks for checking out this epoxy resin and copper handled walnut serving board/cutting board/ charcuterie board.
Inventables:
Easel (free software): bit.ly/2O914Q6
Total Boat Epoxy:
www.totalboat.com/
*Use code JBUILDS15 for 15% off of your order*
Ameribrade 2x72 Belt Grinder:
www.ameribrade...
Materials/Tools:
Tuck Tape - amzn.to/2xvv7Of
Kreg Jig - amzn.to/33QUqXs
Utility Knife - amzn.to/33O8TDo
Jigsaw - amzn.to/2xqcWJU
Router - amzn.to/2QN6Ytm
Flush Trim Bit - amzn.to/2UidPgH
Incra T Rule - amzn.to/3drOKHE
Edge Square - amzn.to/3akpd1f
Pika Pen - amzn.to/2UQmFBx
Self Centering Dowel Jig - amzn.to/39oPDNL
Glue Gun - amzn.to/3drP1KG
Micro Mesh Sanding Pads - amzn.to/2WR256i
Support on Patreon: / jonnybuilds
Patreon Supporters:
DFM Toolworks - dfmtoolworks.com/
Matt Varughese
Lex the Historian - / lexthehistorian
Maker's Best Friend - / @makersbestfriend
Bevelish Creations - / @bevelishcreations
Bike City Woodworks - www.bikecitywo...
Cunningham Woodworks - / @cunninghamwoodwork
Ethan Carter Designs - / ethancarter. .
4130 Designs - / 4130_designs
Made By Laurent - www.youtube.co....
Rich17 Designs - / rich17designs
Phillip Slaughter
JT Woodworks - www.youtube.co....
Dave at Maker Pipe - www.makerpipe....
Cowdog Craftworks - / cowdogcraft. .
Mortgage & Mitre - / @furthernorthfab
Jesse Tubbs
Christine Carlson
Music: Epidemic Sound
CREDIT: Subscribe Button by MrNumber112 • Free Download: Subscri...
#sponsored #servingboard #cuttingboard

[@CasualBuilds]

Dude, I LOVE the incorporation of the copper pipe for handles. Filling the ends with matching white epoxy was a very nice touch as well. Well done! 👏

[@ericschiffman871]

Cheese! Man, nothing better at the end of a project than Manhattan's and snacks. This is awesome.

[@diyhuntress]

Those copper handles with the exposed epoxy on the end... insanity. This looks so dope!

[@annmarek3989]

Cheese LdOL at the joke about using tools for the unintended purpose. Just Beautiful!

[@kencross25]

CHEESE. Beautiful board. I'm a newbie to woodworking and this will be my first ever build. Can't wait to see how my board turns out.

[@CutItOutWithUs]

Absolutely STUNNING result! GORGEOUS! I love it!

[@BearWoodWorkshop]

Cheese!! I don't think I would've made the epoxy white but that is all subjective. The serving board was a well crafted thing of beauty! Thank you for sharing this content!!!

[@jeffyoder76]

Cheese Two of my favorite things, copper and walnut. Very nice.

[@amosrogers840]

I did not know you could add mineral oil to resin like that and it would dry on the resin. I thought it had to soak into the wood, this video has mede me rethink my cherry party platter thanks and awesome job.

[@thedoorguycharlie]

How could I not watch to the end. Cheese... Verry nice job.

[@AprilAllYear]

Cheese! Great board. Love those little touches that make your work products special and stand out from the masses. On a different note: you seem a bit taller than many folks and it doesn't seem you customized your work surfaces to accommodate your height. Take care of your back - others can adjust to your-sized work surfaces in the less time they spend on them, just as you have done/do on standard issue work tables/machines. Just sayin' 🙂 Love your work. Love your channel. Thanks for all the inspiration.

[@orleiantonio5629]

Jonny, very, very cute! Loved the idea. Congratulations!

[@dirtywindshield6903]

This is the wildest woodworking video that I have ever seen!

[@JolienBrebels]

Really beautiful Jonny! I love the contrast of the walnut with the white epoxy!

[@savannajones869]

cheeseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ABSOLUTELY BEAUTIFUL! i love all you art works so muchh there amazinnggg

[@1865Cowboy]

“Cheese!” Beautiful work. I’m inspired to build something similar for the misses.

[@robrobertson5582]

"Cheese" Great video. That is very cool. Very classy looking. CNC machine is cool. Could watch that machine work all day.

[@FigmentsMade]

Those are such a good tips to use the cutoffs to help keep the holes for the handles from chipping out and to use the centering jig to get the holes started. Nice one! Say, "Cheese!" 😉

[@raynoladominguez4730]

Beautiful project. I really like the use of copper for the handles. Overall a great design. "Cheese"

[@JBuckman10]

Starting that hole with a Forstner bit may have helped with that drill bit tearout

[@waterlilly62lori]

Thats beautiful. I wish instead of cutting the copper pipe flush with the board, some kind of copper cap would have been pretty too.👍

[@stevied1125]

now that was fantastic

[@chriswhitley3283]

I been looking for a way to do a small epoxy pour. Had thought about this. Gives me a better idea on what to make, now.

[@craighard2746]

Cheese. Amazing project. Has me completely inspired

[@liondirk]

“Cheese”! That is a great project and should prove to be a really good money maker for you.

[@naitzabeth]

Incredible. Very careful and super detail project.

[@jonny555ive]

Beautiful work sir 👍👍

[@thepalleteer9301]

Really Nice Project Man I love the white pearl pigment in the white river. It must be really nice to be into a bigger shop now many more possibilities for you now.

[@thechriswhewell]

CHEESE! Inspirational

[@MrRlitcher]

Very nice, the copper handles are really great

[@chriswhitley3283]

Yep that’s some good work.

[@jackpinnell3204]

"cheese"! Nice work, very involved process but beautiful piece!

[@bobbieashton8521]

I found if you run the drill bit backwards it’ll start the hole enough with no tear out

[@ericruhlmann6817]

Cheese. Nicely done.

[@city310]

This board is badazz!

[@gersonmarconi384]

Good Morning. it was wonderful. excellent job. congratulations!!

[@williepirie5329]

Stunning work sir🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@perryhunter129]

At any plumbing supply place you can get copper "plugs" by drilling out the ends with a larger bit 1/2 inch in and gluing the ends on it would have made a nice finish accent to the sides.

[@jimhowe3860]

"Cheese" love it

[@traceyrice]

Nice job! 😁 Cheese! 🧀

[@jasonmickley4835]

Congrats again on the new shop!

[@JonnyBuilds]

Thanks brother! It’s in SL. You’ll have to come check it out.

[@jasonmickley4835]

@@JonnyBuilds oh if I must....

[@JonnyBuilds]

And extra patrol it constantly

[@daverigby2577]

Very busy piece. A lot of time. Very nice nonetheless

[@angelstabley4416]

CHEESE! Love this project! Awesome build!

[@johncoonradt9000]

Excellent job

[@skiddytwin4759]

That is so beautiful

[@NehpetsNosliw]

CHEESE! Beautiful serving board!

[@josephduffy7093]

Very nice project

[@KagedCreations08XX]

Great design. Looks really cool.

[@clickster1883]

Formagio! Remarkable work! Really well done.

[@devondunkle1063]

Beautiful.

[@Lisa-wd6bh]

Your result really so perfect👍👍👍😍

[@Certawin]

Nice, like the color differences. And a good "cheese" to try. If you can find it. Is a white oak smoked aged white cheddar.

[@Mrz_Wild_Wolf]

Cheese I look forward to doing more wood working.

[@Rockclimer8]

Cheese! - Beautiful creation!

[@kennethjohnson6567]

Cheese 🧀 - I'd love one of those!!

[@annbothwell5117]

Cheese! Great idea with extra wood!

[@EthanCarterDesigns]

Another truly incredible piece and video, Jonny! The copper pipe with the resign was such an awesome detail. And now I really want some "Cheese" - see how I worked it in organically there...ok it was a little forced.

[@JonnyBuilds]

That was cheesy!! Thanks brother 🙏

[@ChrisPage68]

You did it very Caerphilly... 😉 Cheese!

[@DaddyBear3000]

Brie 😉 bought some brass rod to make the handles in chopping boards I made for Christmas.

[@JTWoodworks]

Very cool project! Especially in a world where epoxy rivers are getting kind of CHEESE-y

[@JkCanvas]

Cheese. Love the serving tray and how you put the copper handles on it. May I suggest suing some Brasso or NeverDull to polish the brass instead of the micro mesh sanding discs. It will take less time. Thank you for the inspiration.

[@omarzavala295]

Bad ass piece!!

[@bobbonham4823]

Nice! Thanks for the video. Another project for the list.

[@ashleygreen97]

CHEESE - nice work.

[@christopherpravata964]

Very talented and classy, you should do a cutting board next and I know it sounds dull but with your imagination it would be great.. keep the projects coming.

[@FredMcIntyre]

Looks awesome Jonny! 😃👍🏻👊🏻

[@nemesisnight08]

Enjoyable watch, thanks for sharing the walk through

[@SpencleyDesignCo]

Congrats on the new shop Jonny! Oh, and sick project too! ...oh, cheese

[@PFWoodturning]

Cheese. It looks stunning!

[@torinhalsey6313]

Cool design. Great project.

[@torinhalsey6313]

And Cheese.

[@timwilliams12]

Cheese! Nice job...

[@RCW-Designs]

I feel like I should be questioning my lifestyle since I don't have a single serving tray. This is one is really nice. Did remind me that I need some whiskey soon.

[@frankwolf9187]

Very nicely done!!

[@lsvoers]

Beautiful

[@jerlynneallison6361]

"CHEESE" 🧀 I think you should have used those off-cuts from the handles to make a cheese knife to match it! 😉 Very beautiful, great job!🥰

[@lisamclean5472]

Beautifully done!

[@MosnoAlMoseeki]

That was awesome. Cheese! :)

[@lisarutherford2576]

Cheese. Great project - interesting to watch the process.

[@AndreaMerchak]

That's awesome! I loved it!

[@johnpulliam8770]

Cheese and WOW!

[@sportstertaco]

Cheese!! Another great build.

[@diyvietnam7952]

Beauty full

[@katiemarek6741]

Cheese! So pretty!

[@alexclark6777]

Cheese! Loved the copper handles and the walnut, but I'm not too sure about that white pearl resin. Might just be my eyes but I think something a little more translucent/colored would have looked more appealing, as that reminds me of a block of polystyrene. That's just my opinion though, and I really appreciate you putting this video up here for us to enjoy - especially as there's not a lot else to do right now!

[@josephxkendrick]

That was awesome!

[@BuiltByChris]

Cheese!!!! Mate your work is spectacular. You've given me the inspiration to try this for myself. New subscriber.

[@thepedalsadvocate7389]

Beauty!

[@LeeEnfield308]

Cheese That's a very nice project 👍👍

[@Zogg1281]

"This" or is it "Cheese"? You just said "comment "this"" 😋 That board does look really good. To avoid tear out when drilling into wood, I've used a mix or spade bits and forstner bits, but brad points are my favourite. I've also used metal hole saws to start the hole off, but they need to be really sharp! I then finish off with a regular wood bit, which gives a really clean hole. 👍

[@jasonlewis3620]

Cheese! Beautiful! Thanks for awesome videos!

[@brianskovlarsen2479]

cheese nicely done

[@scottmcfarland1177]

Nice project well done!

[@waynemcgregor8514]

Cheese. Great job

[@nafitron]

Cheese! Very cool.

[@MCsCreations]

Beautiful job, Jonny! Really amazing board! 😃 Stay safe there, dude! 🖖😊

[@billdiehl156]

Cheese! First time I’ve watched one of your videos. Instant subscriber! Very nice project.

[@JonnyBuilds]

Welcome aboard!

[@lukemax1984]

Cheese. Great video.

[@The_Pink_Elephant]

Awesome work!

[@taylorsessions4143]

I'm shocked that tuck tape hasn't started offering a 6" wide roll yet. They know what their customers want

[@chriswhitley3283]

Well yeah, they also know they are selling three times the tape with two inch. There’s an old saying wish in one hand and crap in the other. I think you can get the answer.

[@mattrobinson8238]

Cheese, great video

[@dr.byronblasco6210]

Cheese - great project!