This place looks magical. So organized and clean. Like a metal supply mall….
@juliusspartacus5437 Жыл бұрын
This video is loaded with little fab tips. I used a lot of your examples here to make a tree for welding school. Thx!!👍
@PTJeff9x11 ай бұрын
This has got to be the best table accessory I've ever seen My son has been accepted to a welding program through his high school and I'm looking for things to help him practice. Thanks for this project. It'll be a great first project for him that will allow him to master the art of welding.
@randyharris65275 жыл бұрын
I liked the way you centered the main tube to the base plate. Neat trick👍
@veizour3 жыл бұрын
Learned a lot more than I anticipated. Thanks guys.
@petet30255 жыл бұрын
This was such an amazing and comprehensive video! Very well done, and thank you so much for taking the time to put this out there!
@donkeypunch8175 жыл бұрын
Red Beard just going "yeah, alright" everytime man cub said something made me chuckle idk why
@glauckoma27135 жыл бұрын
I love the bloopers you guys leave in
@bruinflight4 жыл бұрын
This is an excellent channel; your contribution to safety education is invaluable. Thank you and I'll make sure to recommend your videos and topics.
@tomwagemans18725 жыл бұрын
Man I learn something every I watch one off your video's. I like the portaband trick! Keep up the good work. Greetings from Belgium.
@bradymcphail96905 жыл бұрын
Thank you a lot for this video. It's super important for me to practice. Especially since my accident and I haven't welded for over 6 months, It may be another year before I'm able to drop my hood again if ever.
@yusufdustin50383 жыл бұрын
Instablaster.
@danielww90223 жыл бұрын
I didn't know I needed one of those until I watched this.
@Kevin.L_5 жыл бұрын
I always pick up something from there videos. Thanks guys.
@igorfed9934 жыл бұрын
Where? Or did you mean “their”?
@Labrador_Forge5 жыл бұрын
Thanks guys, you knocked it out fast. Now we will build one the next few weeks.
@Welddotcom5 жыл бұрын
Thanks for reaching out 🍻
@davidaguilar15664 жыл бұрын
Building mine this weekend, during the week I went for the first time ever to get remnants from my local metal supply store & it was super cheap! I called ahead before showing up & told me to come check out the remnants pile. Thanks for the help & tips fellas!!👍🏾
@danielmeecham4643 жыл бұрын
This is very helpful. I'm just starting out, so I'm watching a pile of videos in between picking up equipment before I start making stuff. You guys make decent videos. Thanks guys!
@dgrimaldo20082 жыл бұрын
Just found me an Alro here in Orlando. Love that place. Remnants section is perfect for odd projects.
@cheffsolo77395 жыл бұрын
Keep this kind of video up man
@Welddotcom5 жыл бұрын
Doing our best 👍
@auntjemima3235 жыл бұрын
This is a really effective and cheap welding stand I love it ❤️ great work guys really enjoying the vids!!
@ericknight21614 жыл бұрын
Where did Bob Moffat go, I miss his videos. This was a good video too, thanks for the design idea.
@Crazystuff1043 жыл бұрын
He’s about to start on let’s weld something KZbin channel
@aj67312 жыл бұрын
Needed that laugh today, going to look for a old cap now in shop
@HomineDomine5 жыл бұрын
A great Support. I'm drawing a welding stand for practice in Autodesk Inventor, your video gives me an excellent idea. Congrats for your channel. Greetings from Chile.
@damonrice84693 жыл бұрын
Nice project stand. I love the metal store!! That store will have me thinking of all kinds of projects to build.
@bruced14295 жыл бұрын
great job on the welding fixture, I am going to have build one that I can also use for supporting my arm while welding.
@nate_k92774 жыл бұрын
I like how eager man cub is to teach. It makes me happy
@alozano7932 жыл бұрын
Thank you thank you! Appreciate your knowledge and clear explanations. Great to see pros at work.
@curtisvonepp43355 жыл бұрын
Nice pipe & plate test stand 👍 one other good use hang your Paint spray project's again a 👍😁
@johnduran76635 жыл бұрын
Nice job always learning something new. Can't wait to get started on my own. 👍👍👍
@davec18513 жыл бұрын
I anchor mine in my vise that has a pipe clamp below the main jaw. That way my horizontal pipe arm can be tilted to the 45. I just have an L joint with another piece of pipe at the bottom instead of bolting it to the table. Saved a bit of work.
@ssskids1233 жыл бұрын
Hugely helpful video for those of us getting started! Thank you both.
@chadhanson34314 жыл бұрын
This video is great. Most of my projects are sourced from the by pound scrap at the local steel supplier.
@aaronzuccaro50894 жыл бұрын
Thanks guys, just getting into welding. Trying to teach myself stick welding, practising different angles and this looks like a good project to try.
@magoxide77775 жыл бұрын
Dang that camera transition in the car was smooooth.
@morganweller14913 жыл бұрын
This video is awesome for beginners so they can practice I made a tiny stand for pipe when I was in grade school
@caseygriswold86173 жыл бұрын
Awesome build! Thanks for sharing.
@fjb47503 жыл бұрын
I love this channel I can’t wait to get my TIG welder. It’s on its way from Washington😬
@drahgore5 жыл бұрын
Well I know what Im doing this weekend. Say "Hi" to Bob for me. Thanks guys!
@jacobflores76215 жыл бұрын
Simon Van City where is bob. Miss that guy
@thorrite97344 жыл бұрын
Oh yeah, loved what you did and its something I have wanted but didn't know how, now I do. thanks boys.
@donnarhill19325 жыл бұрын
Mic drop! Smooth! Nice save getting out of the vehicle.
@dhanwatiesukhai25245 жыл бұрын
Love it . I’m gonna build one (Andrew)
@hugorujeles873 жыл бұрын
This is so much fun to watch and get pointers on. You'll ALWAYS need jiggs and fixtures like the one in this short to help you out with making all your builds that much easier. Love this really helpful tool you made to make other things. Keep up with this great content bro 👌 I'll be checking in soon again! Thx. ✌😎
@robertkennedy96183 жыл бұрын
Great project. You talked me into making one for my table
@mikef-gi2dg5 жыл бұрын
First things first, there is a raw steel junkyard???? Oh oh shouldn't have shown me that one. I want to build a stand on smaller scale, so cool. There are dozens of smart ways to make things I never thought of, and ways to measure things to make it fit easier, thanks.Weld.com got some very good videos.
@1978garfield2 жыл бұрын
This looks like it could be handy for holding small parts while they were welded up. I am just a home gammer and won't really be studying for certifications but this stand still looks handy.
@DavidJones-we2ex4 жыл бұрын
This is exactly what I was looking for. Thank you.
@theDozerman885 жыл бұрын
Hey!!! I was just think about building one these this weekend...thank you for all you guys do!!
@michaelwatson48225 жыл бұрын
great job on the fixture stand , going to build one when I get time ,
@jordanrowan25374 жыл бұрын
I actually just started practicing two weeks ago and was looking to do something like this at home when I can finally get a machine so a can practice at the house too
@shermrock3454 жыл бұрын
Ima make this one of my projects this week.
@MetalSpark97 Жыл бұрын
Hello you help me a lot I hope I work in your country I'm from Philippines thank you for the ideas
@orbitalair21035 жыл бұрын
Hey that was a cool video! I'll admit I am intimidated to go to the metal supplier, and ours arent open on sat. I kept waiting to see if Bob would pop in with the stick welder !!
@paulone-off72865 жыл бұрын
That's a nice stand you made there, god design and very useable
@stephanieadams36964 жыл бұрын
Appreciate the money-saving tips.
@tjjohnson41852 жыл бұрын
That was a fun watch!
@businessandpoliticsinswede31384 жыл бұрын
The third hand was a surprice!
@TheFalconJetDriver3 жыл бұрын
Great tips on all of your techniques!😁🛫
@markhemerick62635 жыл бұрын
Asome idea about removing the corner of the square to clear the weld. Asome info! Thanks
@mrdddeeezzzweldor50395 жыл бұрын
Nice presentation and useful tool
@nigelsandywell84035 жыл бұрын
Awesome, thanks for the build. Just got make one now thanks !!!
@woodbyte12 жыл бұрын
Really interesting and well explain instruction.
@6miler5 жыл бұрын
Wow, I'm from a little town and the only steel up for sale is at our machine shop and the guy charges 600% on everything lol. That place looks amazing!
@fokusBG2 жыл бұрын
very handy i am gonna do one for my garage
@discopete14995 жыл бұрын
I use a counter sunk screw from below to centre nuts when welding then to plate
@dannylynch77413 жыл бұрын
Man wish we had a metal supply shop like that in the dfw area....You cant even get cold roll tubing without mail ordering it...
@kimberliegrass29805 жыл бұрын
Awesome...i would take the stand you made and add something to rest your arm against when youre welding...
@DavidBrown-sv5lh3 жыл бұрын
We use the same design in our welding booths at my school
@jamesbrandon85203 жыл бұрын
I wish I had a steel supplier that was a 10th the quality that yours is
@eddy_spaghetti73585 жыл бұрын
This was awesome going to see if me and my friends can make this for our high school. Is there any way I can get plans with specific measurements from the build
@precisionarc5 жыл бұрын
Look at how it's made and do something similar, you don't need specific measurements, as long as it does what you need it to.
@Martuszewski5 жыл бұрын
I live in Clearwater, where your shop like take picture and return second trip so you can sign it
@sameeralwaelie239621 күн бұрын
Great job man👍
@precisionarc5 жыл бұрын
I wish Alro was open on Saturday's
@fsegura76o4 жыл бұрын
Awesome video! Helped a lot 🙌
@CashensPowerwashing2 жыл бұрын
Good video, I have a hobart flux core machine that I absolutely love, i use the Lincoln anti Spatter gel that you dip your flux core tip in, just curious is it ok to dip my tip in before it gets warm or hot? Or is it best to wait until after you lay a weld down then dip so that its warm. I didnt know if it makes that big of a difference if its cold when dipping. The stuff has kept my tip looking pretty good though so very happy with it. Just repaired a Toro Recycler 22" deck yesterday, where the grass discharges the bottom is a thin about 1.5"-2" strip of metal and very commonly breaks, but my flux core machine did well repairing it after turning down the amperage 👌
@Sam-lk6eo2 жыл бұрын
What kind of cutoff wheel was that ? It seems a lot cleaner and creates less sparks than the abrasive types of blades ! The abrasive types seam to wear out too fast also ?
@dwaynelejeune35085 жыл бұрын
Great vid. Keep them coming
@Chilllybob5 жыл бұрын
Great Idea .Thanks
@repaircollc3 жыл бұрын
I am curious if you can sit down for a weld test or does it matter?
@mrx.22334 жыл бұрын
Hi There, I seem to have a problem cutting perfect 45 degree square tubing. When welding these square tubes they have bigger gaps in the inside than the edge. Could you possibly cover this topic. Thanks.
@chadhanson34314 жыл бұрын
Can you get nuts, bolts, allthread, etc in mild steel instead of the coated stuff?
@weslymanley89535 жыл бұрын
What brand of finger clamps are you using if you don't mind my asking?
@mikek52063 жыл бұрын
Great video
@kegcoffeetable2 жыл бұрын
THanks alot. Good Video.
@METALMUNCHERS775 жыл бұрын
I like that. I made my with a chain vise with a swivel to go 5-6-1 g position. And then the other side for plate with a mini table for tacking coupons up similar to triangle engineering. Man this one is simple and space saving gonna make one like also. Awesome job!!
@ArvizuDesignFab3 жыл бұрын
Awesome! thank you!
@Fraser16614 жыл бұрын
Great helpful video`s thank you. Whats the chance of you guys shipping to the UK. I`m in Scotland and would like some of your merchandise.
@scottgammel57714 жыл бұрын
wish I had a metal supply like that in my area
@josephkennedy56533 жыл бұрын
Needed this
@craftsmanbyheart4 жыл бұрын
Yah.. helpful in many cases.
@carlosceoofredlinequickshift3 жыл бұрын
You might aswell work at that place you brought the metal from lol 😆
@joelaudette97122 жыл бұрын
Best back ground music For a supply house lol
@toolbox-gua5 жыл бұрын
Great idea. Should the mill scale be stripped all over ? Or just areas to be welded?
@davidshifflet59332 жыл бұрын
Hey this is good shit. Please keep up the great content
@rcstl88153 жыл бұрын
When trying to match the table holes, instead of measuring, why not scribe the holes from under the table?
@DeanSmith-c4i Жыл бұрын
What are the measurements on everything used? Maybe make a blueprint?
@VladekR5 жыл бұрын
Brilliant, just discovered your channel and love it, only worry about your bird caching fire from sparks ;-)
@BurnabyAlex5 жыл бұрын
20:00 why not wrap the bolt with a loop of 1/16th wire?
@francoisgrobler35045 жыл бұрын
Gr8 stand. How would you incorporate purging for ss welding 6inch pipe?
@balloney21752 жыл бұрын
Fantastic!
@michaelsfabwork29854 жыл бұрын
Nice i need to make one of those.
@junioribarra68852 жыл бұрын
Dope vid I’m trying it
@dozerman531115 жыл бұрын
Now that was a damm good video. I will build one of these. Thanks man