Replace door gasket on your stove (wood, pellet, coal)

*I show you how to replace a door gasket on your stove. (pellet stove, wood stove, coal stove)
If this is not the size for your stove just click on the link and search for your size
thank you for watching
good 3/8" gasket kit amzn.to/3a3ZoRP
better 3/8" gasket kit amzn.to/3a1MFz6
Dewalt tool kit amzn.to/2JUzQMx
Thanks for watching and God bless
*Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
*Disclaimer - Thank you for visiting my KZbin channel. Please understand that the content on the DIY jim KZbin channel is intended for informational purposes only. I make no warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information posted on my KZbin channel is strictly at your own risk, and I will not be liable for any losses and damages in connection with the use of my KZbin channel.
updated 4-10-20
#stovegasketreplacement #harmangasketreplacement #harmandoorseal

[@weirdmom-vz5mb]

Thanks for this. Pellet store guys wanted $400. to do this. Now I can do myself.

[@DIYJIM]

Holy smokes that’s crazy it’s really not that hard. Thanks for watching

[@donniepierce2293]

Yeah they were trying to rip you off that's insane

[@stmcgarret]

Thanks for the video. Loved the addition of the boys looking for a football!

[@DIYJIM]

Thanks for watching

[@thetubbyunicorn4085]

Absolutely love how relatable you and your family are. So glad you didn't cut away with the kids and dogs. When I'm doing this it will be the same haha.

[@DIYJIM]

So glad you like it thank you for the nice comment

[@SkierzRight]

Thank you! Saved my mom and dad another trip over to my house. Saw my dad replace stove door gaskets a few times over the years, but never paid close attention.

[@DIYJIM]

Awesome glad I helped

[@Blackshirtsguru]

Your videos are so informative! I have a Harmen Accentra and was paying someone damn near 300 bucks to service and clean the stove and the exhaust pipe. You have saved me a TON of money

[@DIYJIM]

Glad I could save you some money thanks for watching

[@eleanorfrechette3686]

Oh gosh, another helpful video as my gasket is in need of replacing. Thank you, Jim.

[@DIYJIM]

Welcome

[@armelbourassa1378]

thanks you i will do it just like did it from CANADA

[@DIYJIM]

Hope my video helps you

[@ronsonder2053]

Another great video, if it wasn't for you people wouldn't be able to do the jobs on their own. Can't thank you enough for helping everyone save on repairs

[@DIYJIM]

Glad to help Thanks again for watching my videos Ron. You can share the videos any time you would like also.

[@michaelyates4236]

Crazy kids are good! Thanks for the video.

[@DIYJIM]

I’m glad you like it, thanks for watching.

[@jackneals5585]

Pretty solid video! Thanks man!

[@DIYJIM]

Welcome, thanks for watching

[@RichardMenard1]

I find your videos very helpful and easy to understand and follow. We are purchasing our first Hartman P-61 and can’t wait to fire it up 🔥

[@DIYJIM]

Glad you like them! Thank you

[@JakeDevin-ge1mc]

Thanks bro. Love the videos. Thanks for not making videos dancing for tiktok. Keep it up

[@DIYJIM]

Welcome thanks for watching

[@paulanthony9766]

Thanks dude, helped me out a lot. Best wishes from UK.

[@DIYJIM]

Glad I could help, thanks for the comment happy heating

[@davez5941]

Good video, mine is looking like I should replace it soon. I was curious about how bad the glue was to clean up after it was out. So this helped.

[@DIYJIM]

Glad to help

[@corydickey6977]

sure if you'll see this any time soon but I'm planning to change out my gasket this week. Had my p43 for about seven years going on eight. I do read the manual all the time my wife gets a little confused if I'm not around and she has to figure it out . Question on the cold 🥶 air return is it critical to have it piped in I had a one inch tub cause it was there from the prior stove but I bought the three inch and I'm going to hook it up this week too. Thank you 😊 for the time you put into doing these videos 📹. I'm one that if I can do the work without messing up and don't have to pay the high cost I'll do it but I look up and see how others do it , again Thank You ..

[@DIYJIM]

The cold air is 100% a good idea. Your stove will be much more efficient. Maybe I’ll make a quick video explaining this. Thanks for watching my videos

[@magmag9999]

Excellent video!

[@DIYJIM]

Thank you very much!

[@TheBladepolisher]

Great video Jim. A tip that helps to cure the sealant is to run a hair dryer on low over the gasket, not directly on the gasket for too long. Putting the hair dryer on high and hitting the door from the other side helped a lot also. It warms the sealant and allows it to soak in to the gasket. Jim, got a question for ya, I may have to shim the hinge pins. It seems that the pins have gotten a little worn and the door has to be lifted about 1/4" when closing. I'm thinking the OD pin shim would return the pin to it's 3/8 size hopefully. I don't really have to work with real close tolerances, it seems that the best fit is always best. Thanks again, ROB.

[@DIYJIM]

Sounds like you got it under control, I agree. Thank you for your comment

[@TheRealMozes]

Thanks, just what i needed to know. Looks like you didhit that 200 subs

[@DIYJIM]

Definitely hit 200 my channel has done better than I ever expected. Thanks for watching

[@TheRealMozes]

@@DIYJIM Ive been watching some of your videos. Thanks for making them already learned some stuff and my stove his new seal is working out great. Keep up the food work. Gr from Belgium.

[@diydad7963]

very nice video

[@DIYJIM]

thanks

[@DIYJIM]

I put a link in the description for a 3/8 " gasket that you can buy on Amazon. If you need a different size just click on that link and search for your size. Hope this helps you out.

[@DIYJIM]

You can support my page by just clicking on one of the links above, thank you for your support.

[@davidshepack2484]

DON'T STRETCH THE GASKET!!! I had to redo this operation.

[@DIYJIM]

Thanks for the tip and thanks for watching

[@DIYJIM]

***Here is some links to the door gasket that i used. Please leave a comment, hope this helped you out good 3/8" gasket kit amzn.to/3a3ZoRP better 3/8" gasket kit amzn.to/3a1MFz6 Dewalt tool kit amzn.to/2JUzQMx Thanks for watching and God bless *Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.

[@DIYJIM]

You can support my page by just clicking on one of the links above, thank you for your support.

[@Dr-Shlomo-Cohen]

Is there a difference between the gasket used for woodburning stoves and oil burning stoves? Can i use gaskets made for wood burning stoves, for an oil burning stoves?

[@DIYJIM]

I would not think there is any difference

[@theden25]

What type of glue are you using?

[@DIYJIM]

The glue that came in the kit thanks for watching

[@tsl7881]

Imperial Manufacturing ( a Canadian company, importing from china) is probably including a sodium silicate cement. It dries quicker than high temp silicone.

[@joedoakes8778]

This is why parents drink...

[@DIYJIM]

Couple beers a day keeps the doctor away. Thanks for watching

[@MrFz1rider]

My father would have whipped the kids with the gasket ! Yelling " I'm making a f@^%#$* video "

[@DIYJIM]

LOL Thanks for watching

[@whiterose7909]

3:27 🤣

[@DIYJIM]

Thanks for watching