Unlimited Drone Range (Part 2) | 4G LTE Drone | NodeMcu

[@DIYLIFEHACKER]

It's been loooong since this awesome project. Next one is coming soon..😲

[@ankitgupta19187]

I am unable to give unlimited range to my drone...pls help

[@ee_64_ujjwalganguly23]

Bro i need ur help in my college project.. please help me bro

[@imonghosh3553]

You deserve 1 million subscribers, very intelligent.

[@zabluestacks3700]

The word unlimited dissapears when the battery drains. 😂

[@gamataru9337]

Add higher mah battery

[@Feasal-m]

Bro I was waiting for this from last month

[@rengarider]

kzbin.info/www/bejne/r6WzlHmkr7R8rZI check out this

[@aman_momin_786]

Bro u deserve more than 1 M subs till now

[@valderramajeria]

my man, I will buy a hat just to take it of for you.... its amazing what you did, code for me is chinese, dont have a drone but im trying to learn a bit before buying one to take it apart and making a project, and I thoght I knew a bit, after your video, I realize im just picking parts from the web... do you have a patreon or something, I think I speak from all of us here, but we need to get you funded so you can keep doing projects and make some money. Keep it up bro !

[@james007-s7i]

Brother make a video about mavlink unlimited telemetry that's really help me out and others

[@DIYLIFEHACKER]

yeah sure

[@james007-s7i]

@@DIYLIFEHACKER thanks brother that's really helpful

[@ZuNunchaku]

Yes we need that Drone: APM->mavlink esp8266->blynk Ground station: Blynk->mavlink esp8266->mission planner

[@SURYATAPANSOLAR]

Very good informative video. Keep it on.... Your editing skill is so good... You have a very good knowledge in programming and IOT.... Carry on...

[@dhritimanroy2839]

Okay! First KZbinr with a "Hacker" title who sound that he knows what he is talking! Amazing Video! Keep going!

[@ushaganesh8286]

Where are you located

[@R4YTUBE]

Nice tutorials ! You just got one more subscriber

[@nazmulhuda7062]

😍awesome.take love brother

[@UnpluggedWaves]

HI can you suggest a readymade drone that can be sued for IoT Projects

[@eddydivinkenvo8400]

I have a problem ! While controlling my quadcopter with the Blynk app, usually, after entring in the loop function, the drone just stop with some beeps coming from the motor ? Please what could be the problem ?

[@mokshithsharmat.pmokshiths7442]

Which science and which technology is used in this project of Drone. please tell me brother.

[@ansarizeeshan2372]

Hi Can you give me the detailed diagram for connection if possible, because I am confused that 1.how can I connect 5 channels of the PPM receiver to D8 pin of Arduino? 2. should I connect only signal wires from output of the APM to Arduino?

[@41.karthikm77]

You are awesome....💕💕💕💕💕💕👍👍👍👍👍👍

[@alexandrpetrov1110]

Thanks!

[@chauhanchandu7265]

Nice information

[@TheRealKitWalker]

Why didn't you use lora? It uses less power and has a wide range.

[@nightsky2470]

In joystick how to select gp pin, in my app only virtual and digital pins are showing

[@Le_Sourpuss]

Unlimited "control" range; not unlimited range (you'd need mid-air recharging for that ;) But still amazing!

[@thomasperri3294]

Maybe add solar panel? Charge during day on landing. And fly at night.

[@Mrknow-gs6bl]

you deserve a AWARD OF DRONES so nicely made and explained....

[@DeepakKumar-dq4hl]

I have a problem when i arm my drone more than one time he not arm

[@DIYLIFEHACKER]

Check your endpoints while RC calibrations...And also check GPS status if you are using telemetry

[@DeepakKumar-dq4hl]

@@DIYLIFEHACKER bro I am not using telemetry

[@MathMattersOfficial]

You're genius !

[@saurabhmhaske3543]

How can i modify it for pwn receiver eg flysky ct6b

[@nazmulkhan5437]

Fantastic brother.. 🥰

[@phanin5086]

hey brother how can i get the gps status and arm status in a pixhawk there are no corresponding pins to do that in a pixhawk like the apm i dont have led and gps status pins

[@AbdulMajeed-px7ym]

i like ur all the information nice job u i wait for video

[@AbdulMajeed-px7ym]

Bro u help me plzz 🙏🙏

[@DIYLIFEHACKER]

Coming soon

[@asiskumardas77]

Can you plz make a small vdo on circuit connection of node mcu+mpu 6050 by blynk app. Is Arduino nano is used in this drone circuit?

[@gprolife2879]

thanks

[@santhosh.a5524]

For 9,10,11,12 Arduino pins there is no declaration in node MCU code can you explain and update the code

[@DIYLIFEHACKER]

2 seperate script are there

[@lilliampumpernickel9916]

What internet modem was used to interface the node mcu to a 4g connection

[@DIYLIFEHACKER]

Jio Fi

[@khashapavankalyan2436]

What is the Latency of the signal with internet.

[@DIYLIFEHACKER]

Depends on internet speed of where the drone is hovering.

[@DeepakKumar-dq4hl]

Bro help me I make a quadcopter with apm 2.8 when I land my drone by transmitter sticks not use rtl he come back to land but when I try to disarm I push the stick in left he not disarm and automatic fly anywhere and crash Please reply me to help bro

[@santoshjdixit]

how to wiring with esp8266 if i use mpu6050 as flight controller. and what about changes in coding

[@satyanarayanathevar]

Can we use arduino uno instead of ardunino Nano. ?

[@anentrepreneur1603]

Great work by you may friend and provide good solution 🤟🤟✌✌👍👍

[@dineshgarg9370]

If Replace node mcu with esp32 it has camera also

[@dr.kamaljitbasan245]

Fantastic...but please let me know how to route telemetry from drone to PC or Mobile ,,,,,also a word about Yapua telemetry...

[@rahmatr8324]

What kind of communication do you use to send the data D4, D6, D7, & D8 of nodemcu to arduino? I don't see any of those pin in your nodemcu code

[@DIYLIFEHACKER]

That's done in Blynk app. Pins are declared.

[@rahmatr8324]

@@DIYLIFEHACKER is that PPM signal? Or PWM signal?

[@m2-x-n253]

this video is DEAD UNDERRATED

[@girijalumuri5062]

What is the power back up of your drone

[@gagandeep1714]

sir i made a drone using kk2.1.5 , now i am planning to use other flight controller . with which flight controller should i start with apm2.8 or pixhawk can you please guide me

[@DIYLIFEHACKER]

pixhawk

[@dr.kamaljitbasan245]

How can the flight controller connect to channels 1-5 to node MCU when actually ESC get connected there,,,,,

[@unofficiallegend4245]

Plz apply the same circuit to a ready made rc helicopter... I am waiting for it

[@DIYLIFEHACKER]

wiring will be same just change RC channels input layout in the codes as helicopter and Quadrotors uses individuals.

[@unofficiallegend4245]

@@DIYLIFEHACKER thanks alot..

[@yourmumisacrumpet4882]

awsome work but what if you put a camera on it and have a charging station or a solor panel on it you could land it on a roof and then come back later and fly it again

[@asifafarooqi6417]

Excellent bro

[@Feasal-m]

Yeh he is best

[@Feasal-m]

Do u like to make drones

[@DIYLIFEHACKER]

@@Feasal-m No

[@asifafarooqi6417]

@@Feasal-m yeh bro i love em

[@yogarajgowda]

Bro how to download your mission planner firmware new

[@indianinvention2698]

Open mission planner and go in Help and it will shows check updates click on that your mission planner will be updated 👍

[@catelamp7396]

Hello! Schematic link does nit work

[@MehtabSinghEdhan]

Great work brother...

[@ariefadha6777]

can you do this via mavlink?

[@RandomRY]

hi, can you please send a circuit diagram for this video?

[@DIYLIFEHACKER]

take screen shot

[@RandomRY]

@@DIYLIFEHACKER ok, thanks a lot

[@kartikpandey5335]

Say suppose the signal is low and we are already performing an autonomous flight how can we adjust the code to come down to a level where it could reconnect with the internet towers nearby and continue with the flight path?

[@DIYLIFEHACKER]

If signal is lost while an autonomous flight, then It won't try to regain signal it will perform that occurring flight plan and if it still didn't get it then it will schedule RTL & obviously in the previous flight path it will get the signal. And the drone doesn't have information about network connectivity areas, it tests all positions and and tries to reconnect.

[@kartikpandey5335]

@@DIYLIFEHACKER awesome since I have to make a drone/Rc plane for a purpose to travel between 150-200 kms so can I attach a strong antenna along with the router to boost it's signal.My flight ceiling level is about 500 mtrs from the ground I think so it's possible right for the router to catch signals till this range? Else can we try using some cloud technology ? Plz suggest

[@DIYLIFEHACKER]

@@kartikpandey5335 I think 500 metres is not so far for catching cellular signal vertically

[@kartikpandey5335]

@@DIYLIFEHACKER also bro how can we make this system secure so that no one can hack(because using public internet through towers) into our drone like I saw we can connect to VPN could you make this change and make a tweak to your system

[@DIYLIFEHACKER]

@@kartikpandey5335 Obviously, then we need more advanced stuffs.

[@AfshAd]

Hey i wana know how your apm 2.8 is so stable and. .. i wana know your parameters used in ur drone

[@DIYLIFEHACKER]

To make it stable firstly you have to balance the props to avoid vibration and the most useful method is PID settings. Follow this to set PID properly : ardupilot.org/copter/_images/Tuning_CommonThingsToChange.png

[@simranjeetsingh9955]

can we use node mcu for fpv camera

[@DIYLIFEHACKER]

Yes but slow frame rate

[@ayushmanpal6241]

You are great ...

[@kanhan4013]

By quad not flying in alt. Hold and loiter when I use this mode my quad not take off. And flip any side When I fly it in stabilize mode it can fly nice..

[@drake66668]

Can we trust the quality and durability of APM 2.8 Pls answer

[@DIYLIFEHACKER]

Only when it is properly calibrated and programmed.(PID, Compass, Good_GPS_Signal, Low Vibrations)

[@drake66668]

Thank you

[@Namika_aa]

Where can I collect this tools I want to learn about it , this is very interesting for me , and really brilliant

[@DIYLIFEHACKER]

Everything is on internet, just need to browse

[@juendsouza]

Brother how to contact you , I'm building a Same project z need some help pls

[@subhash5715]

This is the video I needed. Why you not used arduino uno in place of nano?

[@DIYLIFEHACKER]

smaller & cute

[@subhash5715]

@@DIYLIFEHACKER That means there is only physical difference between these two's due to which you choose nano?

[@DIYLIFEHACKER]

@@subhash5715 yes

[@rajdeepdas5338]

great work i really want to make one for myself

[@L_inventeur_Rapide]

Yes good project cool

[@nopechucktesta77]

I have the Parrot Disco drone and want to add the 4g mod but if I lose connection that is $500 lost!! 😢

[@DIYLIFEHACKER]

Not only parrot it's capable of any DIY drone

[@urmilasing9225]

is it compatible with dji naza m lite

[@haakla8438]

How long did it take you to build this drone?

[@DIYLIFEHACKER]

One year including all features which I added

[@haakla8438]

@@DIYLIFEHACKER Awesome. I did a similar project in order to build a budgetary 4G Drone. You can check it out here: pidrone.org How did you manage to get the PID-contol so smooth?

[@apoorvdeepak7333]

Can I control this drone without using amp 2.8 flight controller ...If I use ardiuno nano board in place of apm 2.8 fight controller

[@DIYLIFEHACKER]

Sure

[@apoorvdeepak7333]

@@DIYLIFEHACKER please provide me coding for it.... Because I mid in this project only coding will create problem right now.. Please help me!!!

[@apoorvdeepak7333]

Please suggest me aniesh bro...

[@apoorvdeepak7333]

You have not give any reply on my question ..Please reply and suggest me...!!!

[@apoorvdeepak7333]

What will coding for nod mcu if I used ardiuno nano flight controller and connection of pins between nano to flight controller

[@hitman6647]

Bro I want to program the drone's path that where it should fly, like I want to let it fly to my friends house like that, would you please make something like that.

[@brandambassadortimezglobe18]

You have to make the use of telemetry!

[@nanianilpt077anilkumar9]

Bro I have one doubt...Our mobile is connected to that wifi router or our local internet...if our mobile is connected to internet...! Then how it will configure the data to the drone...?

[@DIYLIFEHACKER]

Mobile is connected to internet not to the router. Blynk IoT platform provides data transfer over the internet

[@nanianilpt077anilkumar9]

@@DIYLIFEHACKER Ok Bro👍

[@mintumandal3412]

Hi, I am Ritam from Midnapore.

[@newsxplained888]

*But, if i get it long range,,so, i have to use long range camera*

[@DIYLIFEHACKER]

That's why v3 is coming with video transmitter capability over internet

[@saurabhmhaske3543]

Have you added any sensors for altitude hold ?

[@DIYLIFEHACKER]

nope just apm

[@shodhanshetty3906]

Which one is the code that you are using to convert pwm to ppm signal? Can this method be used on pixhawk as it accepts only ppm signal?

[@RajSgh286]

Wow...nice...very useful video...

[@dr.kamaljitbasan245]

Please share links for wiring diagram and connection of SBUS receiver with telemetry.....

[@kennethsitcharon4287]

You cant use sbus with the apm2.8, only ppm. ppm is 50ms longer than sbus connection

[@dronepilot1333]

Can this connect to sbus FC? What is the hardware for receiving the 4G?

[@DIYLIFEHACKER]

It's the WiFi 4G router which connects it to cellular network and from there the node mcu connects itself to your phone through internet

[@dronepilot1333]

DIYLIFEHACKER I mean do you need Raspberry PI or something to send commands to the FC?

[@DIYLIFEHACKER]

@@dronepilot1333 No, there's no need of raspberry pi its IoT with NodeMcu which transfer commands to the arduino and the arduino to the flight controller

[@dronepilot1333]

DIYLIFEHACKER can you tell me what exactly I need to add to make 4G enabled drone

[@DIYLIFEHACKER]

@@dronepilot1333 NodeMcu and A 4G WiFi Router

[@shreedharmalashetti6829]

Bro can we use ibus instead of ppm

[@DIYLIFEHACKER]

Yes

[@shreedharmalashetti6829]

Bro can we use only esp8266 with logic converter without Arduino

[@simranjeetsingh9955]

great job little master

[@vishalasware7284]

Boss, I have one suggestion for codes and diagrams. Make a file of codes and diagrams and compress it and upload it to Google drive and share the link in description. That's all, hope it will help you.

[@DIYLIFEHACKER]

Ok, thanks

[@siddharthasahoo508]

Great work genius

[@MrMan6663]

Awesome 😍

[@DIYLIFEHACKER]

Thanks 🤗

[@rachit_25]

Is it possible to use NODEMCU as receiver ??

[@DIYLIFEHACKER]

yes

[@rachit_25]

@@DIYLIFEHACKER I am trying to make a drone but I dont want to use brushless motor . So which type of motor should I use ??

[@yogarajgowda]

My drone is not arming what i should do

[@DIYLIFEHACKER]

Check what the message in mission planner for not arming

[@yogarajgowda]

Bro if the pc had virus and we connected to apm2. 8 then the apm will also get virus

[@DIYLIFEHACKER]

@@yogarajgowda No chance.........

[@yogarajgowda]

@@DIYLIFEHACKER then if the apm2. 8 ic chips are got damaged by over voltage or not

[@DIYLIFEHACKER]

@@yogarajgowda No, there is a voltage regulator.......

[@theRCiest1056]

Awesome dude✌👍

[@sudiptodaskhan1197]

Yes please make a full turtiol of all updated in your drone please

[@DIYLIFEHACKER]

Obviously after all upgrade

[@rajneeshvlog8451]

Please give me it's link to buy it

[@DeepakKumar-dq4hl]

Bro I give command to land my drone by transmitter sticks he come back to the ground but when I try to disarm the drone he like to not disarm it was automatically fly and crash

[@ducminh8641]

I am researching this content

[@Unknowntalks1.0]

How many km range of this project

[@DIYLIFEHACKER]

wherever internet is avaliable

[@akashmajumder8469]

Hello brother Im facing some problem while build my first Arduino drone can you please help me please

[@DIYLIFEHACKER]

How ?

[@akashmajumder8469]

@@DIYLIFEHACKER I m using ARDUINO NANO,MPU 6050 BLUETOOTH MODULE HC 05 AND 7.4 V 3C BATTERY 2500 MAH IM USING MULTIWII CODE PROBLEM- WHEN I'M ACCELRATING USING DRMS FLY APP THE ESC RESTARTS PLEASE HELP ME PROBLEM 2 BLUETOOTH HC 05 RANGE IS 10 M ONLY I WANT TO GAIN RAGE USING NODEMCU BUT HOW CAN I USE NODEMCU AND ARDUINO TOGETHER FOR USER ESP 8266 AS RC CONTROLLER PLEASE HELP BROTHER IM HERE WITH A BIG HOPE 🙏

[@akashmajumder8469]

And I didn't have enough fund to buy transmitter and receiver that's why I want to use Mobile as same

[@akashmajumder8469]

Please brother any help will be really appreciated

[@akashmajumder8469]

Anything brother

[@mustaphakhadouane8937]

Good job

[@unofficiallegend4245]

Nice dude.

[@shuvoahmed3001]

battery backup time??

[@RayRay-yp6oc]

very nice.

[@manjunathayr9348]

can we use python for this kind of project? any idea ?

[@DIYLIFEHACKER]

Not compatible for Arduino

[@mokshithsharmat.pmokshiths7442]

can we control 20km Range using mobile internet . please tell me sir My And my friends Request .

[@DIYLIFEHACKER]

wherever internet communication is available

[@AkshayTravelFilms]

Please make video for FPV camera setup in drone also using APM...Thanks

[@vijayakumarkona443]

IAM totally weighting for that only bro in previous video audio is not clear .and iam using same usb to ttl connector as you used to pair telemetry.but I was unable to pair.it and please make the video as detail as possible bro.as some of my friends are facing with similar problem bro so that these video can help them.by following that video i totally lost connection with air and ground module.but my ground module green led was turned solid.

[@DIYLIFEHACKER]

Ok, I'll