Pat's Easy Change Quick Hitch: Review, Installation & Tips (

[@larrycainjr]

Your timing is providential, Martin! I just received my Pat’s in yesterday’s deliveries and will be installing it this week. I chose that system in large part based upon your earlier review and comparison with the quick hitch. All of your videos are clear, concise and articulate.It is pretty obvious that you spend a great deal of time planning, executing and editing each one. Thanks for all the effort you put into them! They’re super helpful.

[@DIYMyWay]

Hi Larry! I'm so glad to hear my comparison video was helpful to you! Thank you for the kind and encouraging words! Good luck with your installation and don't hesitate ask me questions about it if you need to. I'm happy to help if I can. Thanks for watching!

[@FromSteelToWood]

That is absolutely right about the quality of your video Martin!

[@arturosoto1444]

@@FromSteelToWood donde lo puedo conseguir en México amigo? saludos

[@carlosjoelgarcia3200]

You Sir... Are a TRUE Professional... You must have been a Mentor, Professor or simply a heck of a teacher. Your videos are second to none displaying detail, geometry and details which most of us overlook. Thank you for making these videos available without any hidden agendas or biased. I have been a subscriber now for a short while and truly enjoy your presentations. Keep them coming... We need good teachers!!

[@DIYMyWay]

Thank you very much, Carlos! I really try to make clear and concise videos that are easy to follow and understand so I’m glad you think so.

[@TinMan0555]

Just got mine today but was having a difficult time deciphering the instructions. Whipped out the tablet to “consult the oracle” and your (very well done) video comes up first. I try and learn something new every day. Thanks for being a great instructor.

[@DIYMyWay]

Thanks for the kind words and for watching! Good luck with your Pat’s! I still love mine.

[@dennisberger-b2q]

Thank you for the quick tutorial. It was easy to understand and follow. I hope the quick hitch proves to be useful.

[@richardgonzalez5432]

Martin, I echo everyone of the positive comments others have given you on this installation. Clear cut, succinct and very informative. Such a pain to attach and remove the various implements I have especially in bad weather. Been doing it for 18 years. Your explanation and tips are very welcomed on this system. Now, I need help mowing 40 acres and box blading driveways. Come down and help me!! Just kidding--easy as summer blueberry pie with the Pat's system. Thanks.

[@DIYMyWay]

Hi Richard! Thanks for your kind and encouraging words! Mowing 40 acres? No thanks! Box blading driveways? I have more experience doing that I care for! LOL! Glad you like your Pat’s system!

[@eastkyboy5619]

Great video! You made my installation a breeze. With videos like this there’s not much need for the directions…as if we ever look at those anyway…lol

[@orangetractorguy8201]

I have had my Pat's for probably 10 years or so. Had it on my L2250 and when I sold it, the Pat's found a new home on my L3901. My experience with the Pat's has been similar to yours, and your video will no doubt help those considering getting one. Another great video Martin!

[@DIYMyWay]

Ah, so you are a long-time user of the Pat’s system! Excellent! Good to know it’s still going strong after a decade! Thanks for watching!

[@highland1318]

I bought my Pat's Easy Change over a year ago, just getting around to installing today. Thank you for this excellent, informative video.

[@DIYMyWay]

Glad it was helpful! Thanks for watching!

[@-Dave-is-not-here]

Have the Pat's on my tractor and I run older implements that are not all made to the new standard. It saves me a bunch of money buying older used implements so that hopefully I can buy even more. The other big advantage is I run a post hole digger sometimes and Pat's is the only quick change that you can do that with. I have had my Pat's now for about 6 months and my tractor for a little over a year. I no longer dread switching implements either. Thanks for the video Martin and keep them coming.

[@DIYMyWay]

Hi Dave! Yes, the Pat’s system is perfect for folks like you and me who need or want the option to hook up to older implements without having to do major surgery on them. Thanks for watching!

[@jjhunter4097]

Great video, thanks for going slow and being so precise it really helped

[@DIYMyWay]

Glad it was helpful to you! Thanks for watching!

[@VBCJesusSaves]

I've had Pat's on my Cat 1 and Cat 2 tractors for several years and it's some of the best money I've spent. Pat's makes hooking up 3 point implements as easy as it can get.

[@DIYMyWay]

I couldn’t agree with you more, Josh! I love my Pat’s. Thanks for watching!

[@VBCJesusSaves]

@@DIYMyWay Do you know where I can order parts for Pat's? One of my springs got snagged and broke. Thanks!

[@DIYMyWay]

Sorry to hear that, Josh! I would try contacting Pat’s directly. I’ve heard they are great to work with and support their products. Good luck!

[@turdferguson5300]

I'm 57 and just got the Pat's system. After the first use I was kicking myself in the butt for not getting it sooner. It's more versatile than the boxy quick hitches and weighs much less. I don't think any of our implements are by the same manufacture so a quick hitch just wouldn't work but Pat's Easy Hitch can use em all.

[@DIYMyWay]

Yep, that’s why I went with the Pat’s over a quick hitch. It works with almost all implements, old and new. Not just a select few. Thanks for watching!

[@coldspring624]

Really like Pats...and I canned those sway bars at the same time. I asked Hodge to build me some and they are nice and very well made

[@DIYMyWay]

I've actually considered getting some of Mark's stabilizers, but for now I still like the precise adjustability of the stock turn buckle style. Thanks for watching!

[@ryankc9oza118]

Was 1st thing I did to my ck2610. Love them

[@The_Squirrel_Samurai]

I just got my Pat's in the mail yesterday. I'm excited to put it on this weekend.

[@DIYMyWay]

That’s great Dennis! Your 3 point hook ups are about to get a lot easier. Thanks for watching!

[@SatelliteEngineer]

I've had Pats for about 15 years. Springs are both broken and not worth fixing but other than having to use a rope to tie them shut they work great.

[@davehoward2791]

Just put my Pat’s system on my LS today Martin, with the help of this video and the one Tractor Mike did on the same install. Pretty straightforward after watching the videos, I had no surprises and you made everything so clear that it was a cakewalk. I installed the PTO extender just to keep the driveshaft happy, and while I picked up the extended top link from TS just in case, I didn’t need it. I’ll hang on to it anyway as I may add an implement later that needs it. Took me a little longer than most to finish the install as I serviced the PTO shaft too, watching your awesome video on that. (Best PTO maintenance video on the planet, thank you!) Sure was easy to hook up the bush hog after installing the Pat’s system, worth every penny. My brother went for the quick hitch system on his Kubota, but he told me it is rarely used as it doesn’t fit many of his implements. But then there are folks who swear by them, so there are definite advantages to each. In my brother’s case maybe I’ll send him a Pat’s system for his birthday this year, lol. Thanks for a very useful, very informative video! 👍

[@DIYMyWay]

Hi Dave! Glad to hear you are happy with your Pat’s System! Thank you for your kind words about my videos! It’s very satisfying to know they help a lot of people like you. Sorry the QH hasn’t worked out for you brother! That’s why I made the video comparing the two systems. He might have benefited from watching it. Enjoy your Pat’s system!

[@itmagic4377]

Thank you for an excellent video. Not a big fan of the quick hitches, and the need for shims or add on parts. Great idea, and well presented! Much appreciated!!

[@DIYMyWay]

Glad you found it helpful! Thanks for watching!

[@dadak1231]

Just got my Pats Easy Change System for my Kubota B series. I chose this over the other Quick Attach because the cost of 600.00 and the reviews of this system over other systems. Taking time to get on the tractor with shims and making sure it sets up properly. Thank you for your videos on these tractor equipment videos.

[@DIYMyWay]

I hope you enjoy your Pats as much as I do mine. Thanks for watching!

[@daveedds]

Installed mine yesterday. Used this excellent video as a guide. Thanks for taking the time to produce such precise instructions

[@DIYMyWay]

Glad it helped, David! Thanks for watching!

[@stalrev]

I have a 2021 L2501 4wd and wanted to thank you, you are my goto Person so far down here in Texas, for parts and how-to :) again thanks and these videos are much appreciated!

[@davidbernstein4812]

Excellent idea to put the furniture dolly under the three point attachment, so simple yet genius. Thanks for the great video

[@DIYMyWay]

Thanks, David!

[@terryk3118]

As soon as one of your videos shows up on my phone I watch it. As is typical with all your videos. Very well documented and nicely explained. I got pats quick hitch a few months ago because I have one implement that isn't QH compatible. The other great thing about Pats over the QH i used to have is that it made hooking up the PTO shaft 100% easier because the QH would block access to the tractor PTO.

[@DIYMyWay]

Thanks, Terry! Yes, a quick hitch gets in the way of hooking up the PTO, but it also means you have to get off the tractor anyway, negating one of the quick hitch’s biggest benefits. Thanks for watching!

[@davidneely1749]

Thank you Martin for sharing your time on this..... I just installed a pair on my little 24HP diesel..... real simple, look over the package contents, watch this video and...... 45 minutes later all was complete. Again, many, many thanks and God bless!!

[@DIYMyWay]

Your welcome, David! I’m very glad the video was helpful to you. Thanks for watching!

[@robwhite2282]

Just installed my Pats easy change based on your fantastic instructions Martin. Thank you so much for what you do.

[@DIYMyWay]

Glad to hear it,Rob! I hope you enjoy yours as much as I have mine. Thanks for watching!

[@67cruizer]

Just putting mine on the Kubota today. Thanks for the video. Made install very clear.

[@DIYMyWay]

Glad it helped! Thanks for watching!

[@pigsticker561]

Excellent video. Answers pretty much any question a person would have. Installation was a breeze with the help of this video. Got my rig ready to bust up the spring/summer garden if the rain would give me a break. Thanks for the video.

[@DIYMyWay]

Thank you! Glad the video was a help to you!

[@rcote1234]

Very helpful, thank you. I have had these tucked away in my garage for at least 10 years. Finally got around to installing them today. Went really smooth, thanks to your tutorial.

[@DIYMyWay]

You’re welcome! Better late than never, I suppose. Glad to hear the installation went well. Thanks for watching!

[@texteacher7706]

At last a video with all the details. Great video. Five stars *****!

[@TinMan0555]

Went out to install mine and found that my 1960ish MF35 has tapered lift arms….🤨 which are only 1 3/4 inches wide where these are supposed to mount. 😕 My fault entirely for not measuring before ordering. Sent an email to Pat’s, seeking advice on shims or adaptors. Failing that, my next call will be to Yesterdays Tractors to see if there are “straight” arms available. If all else fails, my neighbor is gonna get a nice Christmas gift for his Kabota L2550. 😊

[@DIYMyWay]

Well doo doo! Sorry to hear that! I hope Pat’s has a solution for you!

[@johnetheriedge8675]

Thanks for always having a clear & and conscise video with information I need. You answered my questions and now I know I need a Pats system that will best meet my needs. John E

[@DIYMyWay]

So glad to know the video was helpful to you, John! Thanks for watching!

[@crazycoyote1738]

Thanks for taking the time to help others in such a clear and aesthetic video!!

[@DIYMyWay]

Glad it was helpful! Thanks for watching!

[@Harley12U2]

Thank you for your thorough explanation. Mike at LSE Nashville told me about Pat's Easy Change Quick Hitch System. I look forward to trying one.

[@DIYMyWay]

Glad it was helpful! Thanks for watching!

[@alphadog-dogtraining3266]

Thanks for the video, it made installing the PATs system a breeze.

[@rogerhale6404]

Im sold, I found a set on Ebay and will be ordering them for my 2007 New Holland TC40. Thanks for the great video !!

[@DIYMyWay]

Hi Roger! I hope you love the Pat’s system as much as I do. It sure makes implement hook ups so much easier. Thanks for watching!

[@3pRanchTx]

Enjoyed the video. I bought my first tractor last year and bought a quick hitch at the same time. I made it a point to buy QH compatible implements since then. Your choice of the Pat’s Easy Change makes since, especially in your case. I laughed when I saw that you store your ballast box on a movers dolly. I do the exact same thing, LOL! Makes moving it around my shop much easier.

[@DIYMyWay]

Glad you enjoyed it, Craig! Yes, a mover’s dolly is perfect for a ballast box. I upgraded the casters to heavy duty 4” ones which makes it even easier to move around. Thanks for watching!

[@3pRanchTx]

@@DIYMyWay Good idea on the casters, I think I’ll do the same. The stock casters make me a little nervous…😵‍💫

[@GPOutdoors]

Thanks Martin. An interesting option for sure. Great to hear it has worked well for you. Thanks for sharing!

[@DIYMyWay]

Hi Gord! Yes, the Pat’s will work with any attachment which is why I like it. Also, since I use my backhoe a lot, it’s much simpler to remove the 3-point hardware because the Pat’s stay on the lift arms. With a quick hitch, I’d have to first remove the quick hitch then the 3-point hardware. Thanks for watching!

[@philipmorton8698]

I just bought Pat's Easy Change system and plan on installing it today. I've got the parts all laid out but the written instructions are not clear and a couple of the illustrations do not match the parts provided. This video answered a lot of questions and I'm confident my installation will go smoothly.

[@DIYMyWay]

Hi Philip! So glad to hear the video was helpful to you. Good luck with your installation! Thanks for watching!

[@David-fv7zg]

Fantastic instruction. You sold me, Im going with Pats, looks like a great system, very versatile.

[@DIYMyWay]

Glad it was helpful, David! Thanks for stopping by!

[@asmellofgreengrass]

Bravo! Thank you so much for this video. It covered all the bases! I now know what to expect for the next 2 years.

[@DIYMyWay]

You’re welcome Kevin! Glad it was helpful to you! Thanks for watching!

[@homesteadpilgrim]

Another great instructional video. Very thorough and professional, as is normal for you excellent content. Thanks for posting. I love my Pats!

[@DIYMyWay]

Thanks, Tim! The Pat’s system is definitely the right choice for me too, but I do see the appeal of the quick hitch and why some people prefer it. Thanks for watching!

[@edouardgluck9588]

Had there been more videos like this in High School I would have gone to Harvard. Thanks Marty. Mine are sitting in the box 6 inches from me as I type this...that leveling box deal is next...just saw that in your video

[@DIYMyWay]

Thanks, Eduoard! Good luck on your Pat’s installation!

[@timb1086]

GREAT VIDEO.. well articulated, clear, and concise. Thank you!

[@DIYMyWay]

Thank you, Tim! Glad you enjoyed it!

[@riverasphenomenalideas9475]

Thanks to your video I decided to purchase these pats hicth instead of the 3 point quick hicth. Waiting for there arrival.

[@DIYMyWay]

Awesome! I hope you enjoy yours as much as I have mine. Thanks for watching!

[@danwilliams4877]

Great video, very clear and informative. I'm new to tractor ownership. My 1992 Carraro has the Pats system installed and now I know more about how it works.

[@DIYMyWay]

Thank you, Dan! I’ve not heard of the Carrara tractor brand. Now I’ll have to Google it. Thanks for watching!

[@danwilliams4877]

@@DIYMyWay www.antoniocarraro.it/en Mine came with the 100 acres I bought. Its great fun learning how to operate it. Instructions are a bit rare, there are no videos on it and I'm brand new to tractors. Steep learning curve, trying to be super safe and have it now getting professionally serviced and will get some more safety and operating tips as well. I told my kids I always wanted a red, italian made vehicle....

[@DIYMyWay]

I did indeed Google it after my reply. Wow! Those are some styling tractors! Looks like the Lamborghini of tractors!

[@peacefieldfarm_mn]

Thanks for the video, Martin. I bought a Pat's this spring (2020) it works great for my needs. Great job editing too! Cheers!

[@DIYMyWay]

You’re welcome! The Pat’s is a great system. Thanks for watching!

[@iwantosavemoney]

Man you have it going on with your little Tractor I like it I need that leveling arm and the pats quick attach also.

[@rockycreek6665]

Thanks for a perfect explanation. Just what I was looking for. Pat’s for the win.

[@DIYMyWay]

Thanks for watching!

[@GrampiesWorkshop]

How's she goin"? Great video Martin!!! Well presented and demoed!!! I just got a Quick Hitch last summer and I have to say I like it, but it has it's drawbacks, like you pointed out in your comparison video. Each system has it advantages and disadvantages I guess. They both save a lot of time when changing attachments and sure make putting the attachment on the 3 point a lot easier on you!!! Thanks for sharing and take care!!

[@DIYMyWay]

Thanks, Mike! Right you are, sir. It really depends on the type of implements you have and how you use them. Thanks for watching!

[@daveknowshow]

great in depth look at the pats. I been real happy with my cheap harbor freight QH. its not perfect with out some modifying but once its modified it is well worth it. the pats is ok but there is a lot I dont care for about it. most of which I cant change with a modification. enjoyed the video. thanks for sharing your insight.

[@DIYMyWay]

Thank, Dave! That means a lot coming from you. You are definitely the king of quick hitch mod and implement adaption and some your your videos helped me decide that Pats was the right choice for me. You are right that the HF quick hitch is a good value with a little tweaking and I may yet get one someday just to try it out. Thanks for watching!

[@threeriversforge1997]

Looks more and more like this will be the solution to my issue with the 3016 I've got. Combined with the PTO Link also offered by Pat's, I don't know how you could go wrong!

[@timhill3162]

Great video on Pat’s, thanks. Could you please supply info on your adjustable side link? I have spent too much time seeking one for my ‘16 L3301. Nothing available from Kubota that I’ve seen and other providers don’t list “L” series compatibility. Thanks much! Tim

[@DIYMyWay]

Thanks, Tim! I have a video on it that will tell you all you need to know: A 3 Point Leveling Box for My Kubota L3901 (#19) - kzbin.info/www/bejne/Z3i7YnyfZdCkf6c Thanks for watching!

[@jimmcknight3021]

Great video, It appears to me that the instructions are dated as some of the hardware looks different in the instructions as what was shipped to me. However your hardware matches what I received so now I am ready to attach to my almost 40 year old Kubota tractor. Thanks for the video. Very helpful.

[@DIYMyWay]

Glad it was helpful to you, Jim! Good luck with your installation. Thanks for watching!

[@jimmcknight3021]

@@DIYMyWay I actually ran into a problem yesterday when I was doing it. I need your opinion. My Kubota lift arms were about two and a half inches. it looked to me like with the larger shim there still was a lot of slack so I put two of them together to see how it would do. Unfortunately, it was just tall enough that I couldn't get the main pin in and when I tried to force it, I totally screwed up that main pin when I pulled it out. I don't think I can get the two shims apart so I think I'm just going to call Pat's and get a new main pin and some more shims as well as the hardware that you hammer into it. I noticed you had a Kubota tractor and I was wondering what you thought if just the taller shim would be enough or if I should get the shorter shims and put two of them together on each side since it seemed like there was a lot of slack? Let me know what you think if you get a chance and I hope you had a good Thanksgiving this past week. I know for most of us it's been a very difficult year, but I do you enjoy watching KZbin videos to help me be a more informed tractor owner on our family property in Western Arkansas that we escaped to from the city on a lot of weekends.

[@DIYMyWay]

Hi Jim! Sorry to hear you are having trouble! It’s okay if there is some slack in Pat’s hook bodies with the shims as long as the shims make the hook bodies pretty close to being in line with the lift arms. The U-bolts will firm things up. However, since you have to call Pat’s anyway, they can give you the best advice on what to do. Good luck!

[@jimmcknight3021]

@@DIYMyWay I talked to the folks at Pat's easy change and they are sending me out some more parts at no additional cost and no shipping fees either! I just explained to them how I made some mistakes and we are going to try 2 of the smaller shims on each side in order to get rid of any excessive sway. Since I was barely off with a small and large shim, I know two small shims will work without an issue. Also, she agreed with you that any sway left should be eliminated by the u-bolts. Thanks for your help and I will get back with you on an update once I get them in which will probably be next weekend or in two weekends from now.

[@DIYMyWay]

Hi Jim! That’s awesome that they are sending the extra parts for free! I have heard that they have great customer support and glad you were on the receiving end of it. Good luck on your next installation attempt.

[@HuserHelpers]

I just ordered a set of these for my Kubota BX. I installed a hydraulic top link, where the center of stroke is just a little too long. My idea is that the Pat's system will lengthen the lower arms enough to have center of stroke on my hydraulic top link be perfect. Nice video, and see you in the next one. I also just subscribed. Jason

[@DIYMyWay]

Hi Jason! Yes, it sounds like the Pat's system should solve that problem. Thanks for watching and subscribing!

[@keithherring7707]

Great job on the video! I will be ordering a pair soon. You can sell them Bossman! I'm sold! Gitty-up!

[@DIYMyWay]

Thank you, Keith! I hope you love yours as much as I love mine.

[@brianjennings3172]

Great video. Very informative & excellent demonstration on how to install the hardware.

[@DIYMyWay]

Thank you, Brian!

[@WdsmnBob]

i had nothing but trouble out of my set, Bush hog kept coming off while mowing. finally took it off.

[@DIYMyWay]

Interesting. I’ve only had one side come off one time when some brush snagged the linchpin loose while I was using the landscape rake. But I also had the same thing happen before I had the Pat’s system when some brush removed a linchpin from my bush hog. Took a long time to find the brush hog lift pin. After that, I started using zip ties to hold the linchpin handles down. Thanks for watching!

[@spierce700]

Best video on installation I have seen

[@daveedds]

Great video. Your videos are absolutely the most complete of any I have viewed. I'm guessing perhaps you are an engineer?? I have the same tractor & Brush Hog as you. Did you need the PTO extender or the longer top link? Thanks for these excellent tutorials.

[@DIYMyWay]

Thank you, David! Yes, I am a retired engineer. Good guess! Yes. Meaning I needed both. Thanks for watching!

[@nftportfolio]

Which sidelinks are you using? Color coordinates to the pats pretty nicely.

[@DIYMyWay]

It’s a leveling box I got from www.compactractorparts.com. I have a video on it in the Kubota Tractors Mods playlist. Thanks for watching!

[@RCAFpolarexpress]

Good evening Sir 😊 You have a created a great informative video Sir 👍😊 Your graphic and editing are outstanding Sir 👍😊 Have a great week end Sir Cheers 😊👍

[@DIYMyWay]

Hi Dave! Thank you, sir! Hope you have a great week too!

[@RCAFpolarexpress]

@@DIYMyWay 😊👌

[@victoriaatkin1]

Thank you, the best video I’ve watched ever!

[@DIYMyWay]

You’re welcome, Victoria! Thanks for watching!

[@DencoTBI]

Great video. I just received my Pat’s Easy Change. I’m wondering what size top link you purchased to account for the extra length needed. My tractor is the same as yours.

[@DIYMyWay]

Thank you! I believe it is 28” at max extension. Thanks for watching!

[@dwayneloftice2326]

Pat's Easy Change system looks like the "Cat's Meow"! Seems to solve other modifications issues that Quick Attach systems don't solve.....like modifying your PTO shaft length....to cut or stretch is the challenge.

[@DIYMyWay]

I agree with you Dwayne. The Pat’s works with almost any implement and doesn’t require mods to implements. A PTO extender can solve the problem of having to get longer PTO shafts for either the Pat’s system or a Quick Hitch. Thanks for watching!

[@terrywaldrop5973]

I have pretty much the same equipment as you have in your list. All new in 2021. Did you need the PTO extender and if so, which one did you purchase?

[@DIYMyWay]

Hi Terry! Nice! Then you have a lot of toys to play with. Yes, I needed the PTO extender and bought one off of Amazon like this one: amzn.to/3jq8GA3. Thanks for watching!

[@NoBite2]

Well done! I’ve had the Pat’s Quick Hitches for several years. Oddly, until your video I did not realize there was such a thing as a PTO extender. Just what I need! My implement has a long enough shaft, but trying to reach under the PTO cover with my arms fully extended while nearly laying on my side and holding my head in just the right way is a PIA and sours my mood. Also, both springs on my hitches broke in the past year. I just got replacement springs and have yet to install them. Does not appear easy to do this. Have you had to do that yet?

[@DIYMyWay]

Thanks, John! Yep, the PTO extender is a great help. No, the springs on my Pat’s are still working fine. I hope it won’t be too hard for you to replace yours.

[@NoBite2]

@@DIYMyWay Really like your videos. Am a new subscriber now! Thank you!

[@2aforteens517]

Thanks Sir! I always enjoy your content.

[@DIYMyWay]

I appreciate that! Thanks for stopping by!

[@scottconey5922]

What a great instruction video.... Thanks!

[@DIYMyWay]

Thanks, Scott! Glad it was helpful to you!

[@riccosmith2932]

You said that the box blade doesn't require the lynch pin washers. Why not and what do they accomplish when they are needed?

[@DIYMyWay]

Go to 8:55 in the video and pay attention to the design of the brush hog pin design and you’ll understand why they aren’t needed in that case. They are needed for implements that have open ended pins and add extra protection from the Pat’s slipping off the end of the pins. Thanks for watching!

[@JosephRosenberry]

Very good well explained video!

[@DIYMyWay]

Thanks! Glad you found it helpful.

[@d.a.ballou9740]

I am still trying to decide if this is the way to go. Could you please tell me how thick the actual hook is? (the dimension from where the pin sits to the implement. I hope that makes sense.) The reason I ask is because on my carryall (which is NO WHERE as nice as yours) there isn't much space between the pin and the wood of the carryall. Thank you for your time.

[@DIYMyWay]

I think it’s about 1” thick. If you have the County Line carryall frame, it’s a tight fit but it can work if you use half inch or more furring strips between the back boards and the frame uprights. Or you can carve out some of the wood of the board behind the pins, which is what I did. Thanks for watching!

[@d.a.ballou9740]

@@DIYMyWay Thank you for answering. I do have the County Line frame and I thought I might have to shave some wood for it to fit because the arms just fit now. Thanks again.

[@jdjack7412]

Great informative video. Buying the Pat's system tomorrow and I believe I need the PTO extender and longer top link. Can you tell me where you got yours, especially the PTO extender. The one I found from TSC has slides on the male side of the tractor and has a hole in it and I'm not sure if I would use a split pin in it or a bolt? The one you showed in the video looks like it would slide on like an implement and lock onto the PTO. Is that the case? I couldn't find one like that. Thanks again for sharing the information.

[@DIYMyWay]

Thanks JD! You’ll love the Pat’s system. I got the top link from Tractor Supply and the PTO extender from Amazon. The exact one I got is no longer available but I found a link to an identical one: www.amazon.com/dp/B06XGW2P8N/. This one slides on and locks, which is more convenient than the pin-on style. Hope you install goes well! Thanks for watching!

[@jdjack7412]

@@DIYMyWay thanks for sending the link. I really appreciate it. I picked up the Pat's system today at Rural King and got a 15% off so I got it for $140 + tax. not too shabby.

[@DIYMyWay]

Glad to hear it, JD!

[@Kevin-ne3tl]

Martin, where did you get that 3 point adjustment link, where you were able to tilt the implement at 7:15? I need one of those! does it have a crank handle?

[@DIYMyWay]

Hi Kevin! I made a video on it that explains it all: A 3 Point Leveling Box for My Kubota L3901 (#19) kzbin.info/www/bejne/Z3i7YnyfZdCkf6c. Thanks for watching!

[@kukolino]

Excellent video Sir !!

[@DonSherman]

Howdy, I was looking for your community page for the carryall and it seems that it and none of the other community pages are currently working. Just an FYI.

[@DIYMyWay]

Howdy, Don! I just checked and the website is up and working with no problems. Are you using this URL?: diymyway.net/ Thanks for watching!

[@DonSherman]

I was but I agree it's working now

[@DIYMyWay]

Great! Enjoy your visit there!

[@gregb2144]

Nice attachment,will they work with extendable arms?

[@DIYMyWay]

I believe so, but the Pat's should eliminate the need to use them. Thanks for watching!

[@donrenfro3750]

I just ordered a Cat. I Pat's Easy Change system for my Kubota L39014WD HST tractor. From your list above (you misspelled Owed in the "Equipment Owned" list), I see you also own a Kubota 3901 4WD HST tractor. However, I have a RCR1260 60" Rotary Cutter. Did you find that you required a PTO extender for the drive shaft to fit properly and make the drive shaft length the same as the original equipment without the Pat's Easy Change system? I know the original drive shaft has an overlap section to it but I don't really want to have to pull the shroud off to find out if this actually presents a problem. Thanks for your informative videos!

[@DIYMyWay]

Hi Don! Thanks for catching the typo! I think you’ll love the Pat’s system. I don’t if I required a PTO extender or not. I just bought one so I wouldn’t have to worry about it and I never had a problem. Thanks for watching!

[@donrenfro3750]

@@DIYMyWay So, do you use an extender or not? I am having a problem following your answer above. If you do use one, what do you find to be an acceptable extender? Thanks.

[@DIYMyWay]

I bought one and I used it. The one I have is made by Koch but several companies make the same type.

[@donrenfro3750]

@@DIYMyWay What is the model number or effective length?

[@DIYMyWay]

I don’t know the model number but it adds about 4” of extension to match the 4” a QH or Pat’s would add to the length.

[@mikecioka1180]

I just got my today :)

[@DIYMyWay]

That's great, Mike! Best of luck with them!

[@foxtailfarm_nc7151]

Very good video, thanks.

[@DIYMyWay]

Thanks for watching!

[@quintinstephens2573]

What length top link did you need to get? Putting these on my L3901 this weekend and will need to swing by TSC to get a new top link. Thanks!

[@DIYMyWay]

Hi Quintin! I got the one that’s 21” minimum length and about 29” max. Thanks for watching!

[@stevek4449]

Will it cause issues with telescopic link arms version? Since mine are extendable that is a bit of concern.

[@DIYMyWay]

Hi Steve! The Pat's hook body measures 2.25" from the center of the pin hole to the edge of the body so if you have at least that much room between the center of your lift arm pin hole and the telescoping mechanism, you should be okay. Thanks for watching!

[@wguisbert54]

Best video on this!

[@DIYMyWay]

Thanks, Wade! Glad you think so!

[@JCHD18CVOLim]

I have some equipment that is Cat. 1 and some that is Cat. 2. Is there any way to install one Pat's Easy Change Quick Hitch that will work on both Cat. 1 & Cat. 2 setups?

[@DIYMyWay]

Hi JC! If you buy a Cat 2 Pat’s system, I can think of two options: (1) change the pins on your Cat 1 equipment to Cat 2 pins, or (2) put quick hitch bushings on your existing Cat 1 pins to make them Cat 2. Thanks for watching!

[@matthewsims359]

Now i am convinced, Pats is the one for me. Thanks for sharing this install video as it will come in handy in the near future.

[@DIYMyWay]

Sounds like someone is about to order the Pat’s system! I still love mine because it is compatible with all implements and not just some implements.

[@michaelmartin320]

Great review. I also watched your comparison to the quick hitch and decided to order the pats easy change system

[@DIYMyWay]

Thank you, Michael! So glad to know the videos were helpful to you.

[@RoyBean51]

Will this work on a Kubota B2710? It looks different than mine in the video.

[@DIYMyWay]

It should if the lift arms fall within the dimensions mentioned in the video. The Pat’s system come with shims and adjustable u-bolts and will fit on most 3 point lift arms. Thanks for watching!

[@timfink5543]

I’m wondering if this will work for my 1950 Ford 8n with stabilizer bars.

[@DIYMyWay]

I’m not sure, Tim. You can contact Pat’s and they should be able to tell you. Thanks for watching!

[@timfink5543]

@@DIYMyWay thank you for the quick response. I found out that Pat’s has an accessory kit for the Ford N series tractors. The kit comes with additional spacers, longer roll pins and a longer main pin to accommodate the stabilizer bars. You have to call Greenwell MFG, and they will send the kit at no extra charge. Awesome!!

[@robby1080]

What's the part # on the adjustable side link shown @ 7:15? I need that!

[@DIYMyWay]

It’s called a leveling box. The one I have required a couple of minor modifications to fit on my Kubota. In fact, I made a video about it titled “A 3 Point Leveling Box for My Kubota L3901 (#19)”. It covers where I got it and the mods needed to fit on a Kubota. Thanks for watching!

[@Formerlywarmer]

Very nice video. I’m guessing you were a school teacher at some point.

[@DIYMyWay]

Hi Jimmy! No, I was never a teacher. I spent my career in engineering and technology. Thanks for watching!

[@Formerlywarmer]

@@DIYMyWay got my pats hitch installed today and barely needed to look at the instructions thanks to your video.. next project washer fluid in my back tires. . Thanks.

[@DIYMyWay]

So glad to hear that, Jimmy! I hope you like your Pat’s system as much as I like mine!

[@vickyholly689]

I don't see any "kits" online with the shim or the u shaped clamp type bolt. Were these purchased separated?

[@DIYMyWay]

No, they come with Pat’s system. If you need extra parts, you can contact Pats. I haven’t had to contact them but I’ve heard many say they are very friendly and helpful. Thanks for watching!

[@vickyholly689]

@@DIYMyWay Thank you I will let you know who it works. I have another question about the quick PTO attachment. I am correct in that you need an "end" for each implement that uses the PTO? SO glad I found your videos.

[@DIYMyWay]

Not necessarily, although the makers of PTO quick connects are happy to sell you extra PTO shaft ends. I have found that it is pretty easy to put the one I have on either of the PTO shafts I have. If you find it difficult, then you can consider buying more of them. I’m very glad to know you find my videos helpful!

[@03bonneville]

great job on this video. Thank you

[@DIYMyWay]

Thanks for watching!

[@tonybackshall5001]

Hi i have a kubota B2601 tractor can you please tell me which is the pats eazy charge that will fit my tractor

[@DIYMyWay]

The Category 1 set is what you will need. Thanks for stopping by!

[@marxhare]

How long of a top link? I have stock l2501 link

[@DIYMyWay]

I replaced my stock one with a County Line extra long Cat 1 top link from Tractor Supply that extends from 20” to 32”. It has worked out great. Thanks for watching!

[@marxhare]

@@DIYMyWay Thanks so much! I ended up getting one from ebay with a 24" body. Overkill but it falls right into place with minimal adjusting. Love the channel. I have utilized your videos for several projects.

[@sfcretired7999]

I have never heard of these. Would you prefer these over the quick hitch?

[@DIYMyWay]

I absolutely do, but that’s because of my needs and preferences. For others, the Quick Hitch may be the best choice. I cover all this in the “Quick Hitch vs Pat’s Easy Change: Which is Right for You?” video. This one will help you decide. Thanks for watching!

[@richcop]

What's the difference between cat and cat 2 thanks

[@DIYMyWay]

Category 1 is for 20 - 45HP tractors and has lift a pin diameter of 7/8” and category 2 is for 40 - 100 HP tractors and has lift a pin diameter of 1 1/8”. Thanks for watching!

[@richcop]

@@DIYMyWay thanks

[@matthewsims359]

Another great video. I cant tell you how glad i am that i found your channel. Super helpful. Thanks for sharing

[@DIYMyWay]

Glad to hear it, Matthew! Thanks for watching!