Most common Chevy Cruze coolant system leaks! - Malibu/Impala as well

[@RandomJoeseph]

I don’t have a lot of issues with mine, but today I finally did - just age related, and this was incredibly helpful.

[@DIYwithMichaelBorders]

Thanks for watching, great to hear our video was helpful. Let us know if you have any questions, and thanks for reaching out to us. 👍

[@DanRussell-q8s]

Well , the good thing is that you probably avoided several other issues with the coolant system that the previous owners had to fix . Sorry ....

[@ashleymatossian8265]

Thank you so much for this video. After 2+ years of a "mysterious" coolant leak, and hundreds of dollars down the drain with mechanics whom never fix the leak...I was driving home today from work when smoke starting billowing from the hood, getting home I open the hood to see coolant spraying like crazy, and with a quick google search I find your video...long story short, you pointed to EXACTLY where it's spewing from, the gasket seam on the thermostat, and now I know finally where it needs to be repaired! Thank you!

[@DIYwithMichaelBorders]

Ashley Matossian Thanks for watching & we hope you enjoyed the video. We are happy you made it home safely & we appreciate you sharing your experience. Hopefully a new Thermostat will solve your issues. Keep us posted! Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩

[@johncarroll5910]

This is only the beginning. In 3 years I've replaced 3 coolant recovery jugs, radiator, 2 thermostats, waterpump, water outlet, both upper and lower radiator hoses, heater hoses and turbo coolant hoses (along with the turbocharger). Each time I install a new part, a pressure test tells me the leak is fixed. Then, before long, I smell coolant again and the leak - finding process begins all over again. As of this writing, the cooling system is leaking yet again. This is the worst car I have ever owned. My next car will be a Honda...good luck!

[@wickedjiry7096]

Same here except for I see how the area for mine looked like it's been wet alot

[@michaelhowell8990]

Starting right at 2:00 minutes. That hose you are talking about has a smaller hose, #14 & #15 in the Chevy dealership coolant diagram, called a turbo charger coolant return hose line. The joint under the heat shield that connects to the hardline was leaking on my Cruze. Hope this helps others. Thanks for the video !!!

[@DIYwithMichaelBorders]

You rock & we appreciate you sharing this. Any & all helpful info is greatly appreciated. As we always say, us DIY’ers need to stick together! 😎👍

[@michaelhowell8990]

@@DIYwithMichaelBorders I decided against replacing the entire part since you have to remove the turbo to access it. I instead cut off the hose & hydraulic crimp off the hardline with my oscillating tool. I cut a 5/16 Dayco molded heater hose from AutoZone (B86800) to size & wrapped it with heat shield tape & added two new hose clamps. Seems like it works well!

[@DIYwithMichaelBorders]

@@michaelhowell8990 Thanks for the update Michael. Hopefully many stress free days ahead for you. 😎👍

[@KarenKelleylucky]

Thank you for being straight to the point and a no shaky camera!

[@DIYwithMichaelBorders]

Karen Kelley Karen, thanks for checking out the video and sharing your comment! We are happy to hear the video helped! Let us know if you have any questions, we are here to help! 😎👍 Keep us posted on your repair! Below are a few other videos that might help you along the way. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again 😎👍 Air Filter Replacement: kzbin.info/www/bejne/i6W7lX6Hf8plnLs Oil Change: kzbin.info/www/bejne/gHPZdKuwnZJljcU P0013 Code kzbin.info/www/bejne/ZorEfWyIatNlraM Camshaft Actuator: kzbin.info/www/bejne/mImvn2SBmdFjpdk Key Fob Battery Replacement: kzbin.info/www/bejne/gIeZnpqrisaBiLs Remote Stater not Working: kzbin.info/www/bejne/nouslH6Khbh8hqM Oil Reset Procedure: kzbin.info/www/bejne/pZClZp-Aat-sqs0

[@jeromechaim8443]

You probably dont give a shit but does any of you know a way to log back into an Instagram account?? I stupidly forgot the account password. I would love any help you can offer me

[@jedidiahaugust206]

@Jerome Chaim Instablaster ;)

[@jeromechaim8443]

@Jedidiah August I really appreciate your reply. I got to the site thru google and im trying it out atm. I see it takes quite some time so I will reply here later when my account password hopefully is recovered.

[@jeromechaim8443]

@Jedidiah August It worked and I finally got access to my account again. Im so happy:D Thanks so much, you saved my ass !

[@ericross5451]

No nonsense well organized video. I appreciate particularly the knowledge of areas of probability of failure. “customers have experienced failures here…” nice work thank you

[@DIYwithMichaelBorders]

@@ericross5451 We are honored to help, and thanks for writing us. 👍🧰

[@beccaslemons]

GM puts in the cheapest parts. About a year ago, I had my reservoir replaced and with the help of your videos, I replaced my thermostat. I know that many cruze owners have trouble with the cheap, GM reservoir. There’s also a recall on most cruzes for the water pump, but you have to be within the 150k warranty to have it replaced for free.

[@DIYwithMichaelBorders]

beccaslemons Thanks for watching & sharing this info. We appreciate it. The Cruze has kept us busy on the MX side of things. Let us know if you have any questions. 😎👍🔧🔩

[@Slayerboy450]

This will be the third time fixing a coolant issue with my Cruze 2015. My coolant bypass hose from outlet to the reservoir tank completely came off on one side. Thanks for these videos and I’m definitely getting a new reservoir tank

[@DIYwithMichaelBorders]

You are welcome, that’s a bummer to hear the coolant system continues to give you issue however whatever the project, we are hear to help. 😎👍

[@johncarroll5910]

You covered every part of the cooling system except for where my Cruze is leaking. The turbo itself is cooled by the cooling system and does develop leaks. Repair involves removing the turbocharger, but this is where my knowledge ends. I cannot find info anywhere on how to repair this leak. It would be nice to see a detailed instructional video that addresses the Chevy 1.4 turbo coolant leak. Thank you and keep up the good work.

[@DIYwithMichaelBorders]

Thanks for watching John. We appreciate you sharing your thoughts. We will add it to the list. We have several Cruze videos filmed & ready for upload. Will be uploading the videos over the next few weeks. 😎👍🔧🔩

[@marlonduncan8688]

I bought a Chevy Cruze from road ready use car that car give me so much trouble

[@marlonduncan8688]

Road ready use car I would never buy another car there

[@jbuck1975]

​@marlonduncan8688 your mistake was the cruze 😢

[@useeme498]

I'm trying to stay a chevy guy my 2015 Cruze... just shelled out 750.00 for thermostat, water pump, drive belt, and coolant refill... I had a 2002 chevy cavalier and put 322,000 miles on it never had a problem and a 1988 chevy beretta got 310,000 never had that problem. I'm starting to think are they now making products for the money and not the craftsmanship and proudness of the brand?? What ever happened to their saying... like a rock... great video by the way

[@DIYwithMichaelBorders]

U See Me Thanks for watching, unfortunately the Cruze has disappointed many owners. Definitely let us know if you have any questions, we are here to help! Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@semperfi1042]

Excellent video. Very informative. I've got a leak in my coolant system. The hoses to the turbo and the reservoir tank as well as the return line were all replaced. Had a pressure test done. Couldn't see any leaks. Not by me but from a shop. 1000$ later and I still have a problem. I'll keep an eye out around the thermostat and water pump area. Frustrating because about every 3 to 4 days, I have to add coolant. I'm not a grease monkey. Wish I was. I build elevators. I've learned alot from your channel and hopefully I can figure it out. AGAIN, THANK YOU FOR A GREAT VIDEO.

[@DIYwithMichaelBorders]

Semper Fi Thank you very much for sharing. Sorry to hear about your engine troubles. Adding coolant every 3-4 days is definitely not normal. Let us know if you have any questions. If you build elevators, you can work on a Cruze. 😀👍 Please subscribe to the channel and ring your KZbin bell 🔔 this will be very helpful to us thanks again. 😎👍🔧🔩

[@johnbelvin5216]

Did you ever find the leak?

[@MikfinityPog]

After all these years did you ever find a fix?

[@christopheryoungman6175]

I wanted to drop a cudos to you on a very well-made video. I'm actually kind of excited to find the leak now instead of dreading it. Keep making great videos like this; they really help

[@DIYwithMichaelBorders]

Thanks for watching & sharing this, many more helpful videos to come for sure. Keep us posted on your project. 😎👍

[@vmtenn]

Thank you! I just saw the bubbling this morning.

[@DIYwithMichaelBorders]

You are welcome, thank you. 😎👍

[@waynechernick3526]

I just replaced my G.M. recall resivor in 32 minutes flat. Thanks Michael. No leaks.

[@DIYwithMichaelBorders]

That’s awesome & we appreciate you sharing this. Another DIY project completed & added to your Belt. Let us know if you have any questions along the way. 😎👍🔧🔩

[@joedevitto6113]

That sure does go all around and under and through .. very interesting this helps for doing a check a leak .thanks~

[@lmicheal1508]

hi thank you micheal borders for reading my comment ,so glad you listen to my problem about 2016 chev curze the dealer and gm did not listen to me went the car was under warranty went it started to in 2017 29.000 km so low mileage, said to me never heard of curze having the problem ,,still there today 2022 thank you micheal ps i dont drive it too much because of problem

[@DIYwithMichaelBorders]

So happy to help, thanks for sharing this. We are always here to help answer questions. 😎👍

[@maxpowers5055]

Great, thank you for this video. I think I may have a bad water pump. Its super we in that area and the car dumps a half a reservoir after a day or two of driving. Going to look at it tomorrow and try and figure it out.

[@DIYwithMichaelBorders]

@@maxpowers5055 Thanks for watching, definitely likely if you are noticing a leak in that area. Check out the video link below, it is a link to a video showing the full replacement process of the water pump. kzbin.info/www/bejne/jGmYhHx-pad_g7Msi=zam01jGNFoD8A_j5 However first, contact your local Chevy dealership and ask them if your Chevy Cruze is eligible for the full 100% free water pump replacement under the recall program. They will need your VIN number and likely license plate number to check if your Cruze is eligible.

[@bplup6419]

I got a 2014 Sonic and you nailed it. I was getting leaks from the thermostat gasket and the waterpump. Not to mention every part basically cracked within two years of getting the thing. Intake boot basically ripped in half.

[@DIYwithMichaelBorders]

Thanks for watching & we appreciate you sharing this. So happy to help & we will always be here to help answer questions. Many more helpful videos to come! 😎👍

[@U2cantrustme]

Thanks for the video - My Cruze is leaking and its either the water pump or the hoses on back firewall, or possibly the heater core. With this video I can now go and take a second 'better' look at all the places that it can be leaking from. My car only has 40K on it so I was surprised to have a leak so soon. When I looked under my hood my leak seems to be farther back than the water pump area. I also inspected that side of the engine already. Water pump didnt look wet and the leak appears to lower down than that, I know the leak can be flowing down to appear more under the car than it is.

[@DIYwithMichaelBorders]

Ucan TrustMe Thanks for watching & sharing your experience. In the event that it is your water pump, this is a GM recall part. This means you can contact your local Chevy dealership and get it replaced for 100% free. Keep us posted on your project. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩

[@MaliciousAction100]

1:48 Just underneath and connected to that valve, there’s a tubing wrapped in metal sheathing. I noticed that’s where the coolant is leaking from for my Cruze. Not sure if you have any tips considering you didn’t point it out in the video

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. Does the tube feed into the Water outlet Valve in your engine? If so, this is just a standard coolant hose that can be replaced pretty easily. To get the exact replacement hose for your exact engine, we recommend calling your local Chevy dealership and providing them with the last 8 digits of your vin #. They will be able to get you the exact replacement hose for your exact engine. Or, you can share that part # with us & we can help you find a replacement hose. Keep us posted.

[@husle1815]

@@DIYwithMichaelBorders i think we’re looking for the same thing. I think it’s the turbocharger coolant return pipe

[@chadbaker5045]

Great video! Straight and to the point. Love your Chevy Cruze videos, you have helped me so much with fixing mine.

[@DIYwithMichaelBorders]

We appreciate that, and that continues to be our goal here at this channel. Reach out to us any time! 😎👍

[@Rikanlynx86]

Thank you for all the help. Been having a leak for a second time. First was the water outlets hose which was replaced and seemed to do the trick. Ut now another slow leak and seems to be passenger side. I am suspecting the water pump thermostat but gonna follow advice and see what I find after car is warmed up. Thanks. 2014 chevy cruze Lt automatic

[@DIYwithMichaelBorders]

Rikan_LynX Thanks for watching & sharing your experience. As you mentioned with the new leak coming from your passenger side, its usually the Thermostat. Below is a link to our step-by-step video showing how to replace your Thermostat. kzbin.info/www/bejne/bneQYmqthKmUmrM Keep us posted! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@U2cantrustme]

Did you find what was leaking on the passenger side of the car? Mine has a leak in that area too and my car only has 40 thousand miles on it.

[@zeromusphoenix798]

@@DIYwithMichaelBorders I have a leak right after the water pump not that hose that leads into the the tri connector towards the engine wall oh, what's that part number and do you have a video do you know somebody that has a video on how to replace that hose

[@DIYwithMichaelBorders]

Zeromus Phoenix Thanks for watching & we are glad to help. This is a Dealership part only. We recommend contacting your local Chevy dealership in providing them with the last 8 digits of your VIN #. they will be able to get you the exact replacement part for your exact vehicle. Us fellow DIY’ers need to stick together. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@brittneygonzalez3746]

This was helpful because my car started to overheat today. I noticed that where the water value is that my coolant was coming out almost like the seal was an issue. I’ve ordered replacement parts for the inlet, water value too. I’m hoping that it helps! Last time I had to replace the temperature housing.

[@DIYwithMichaelBorders]

Brittney Gonzalez Awesome Awesome & thanks for sharing Brittney. Glad to hear the video helped. Keep us posted. 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@ChelseaLoco]

Thank you so much for explaining all the parts of my cooling system in such detail, possibly you can help me answer a question? I know your video is a few years old but I’m hoping somehow you’ll find my comments. I have a spraying leak that gets worse the lower my coolant is falling and more pressure is flowing. The leak is in the thicker hose directly under the water outflow valve. Would you advise using some silicone tape to seal until I can get into the shop for repair? Or anything that could seal/slow the leak for just a few days until I can get into the shop?

[@DIYwithMichaelBorders]

Thanks for watching and welcome to the DIY Raptor Club. Let’s get this figured out!! We recommend replacing the hose all together. The best route to take is to contact your local Chevy dealership and provide them with the last 8 digits of your VIN number. They will be able to get you the exact replacement part number for your exact engine. You can either purchase replacement hose from dealership or use the part number they provide and purchase elsewhere, that’s personal preference. Please keep us posted, we DIYers need to stick together!!! Looking forward to hearing back from you Anon. 😎👍

[@TaractusFilms]

Thank you much for the help! You have a great KZbin video and are really knowledgeable on this subject. You have saved me so much time! Thanks again!

[@DIYwithMichaelBorders]

Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. That means the world to us, thank you. Our goal continues to be getting you the info you need without wasting your valuable time. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@rgrrgrsxndngr1904]

@4:19 what is the name of that rubber hose? My buddy has a leak right where the hose connects to the water pump. He took it to a mechanic just earlier and the mechanic said he couldn’t see any leaking but him, me, and my wife could see the leaking when he brought it over.

[@DIYwithMichaelBorders]

Thanks for watching, that’s the large hose you are referring too. It doesn’t have an exact name. To get the exact replacement hose for your exact Cruze, we recommend contacting your local Chevy dealership and providing them with the last 8 digits of your vin #. Again by doing this, it will ensure that you get the exact replacement hose with the exact measurements and size for your exact Cruze. 😎👍

[@rgrrgrsxndngr1904]

Found the leak, a small tear, about 1/6 of an inch long, on the bottom side of the hose, just to the left of the safety clip.

[@rgrrgrsxndngr1904]

@@DIYwithMichaelBorders awesome man, with that type of response I’m definitely subbing to your channel! Hell yeah thanks!

[@DIYwithMichaelBorders]

@@rgrrgrsxndngr1904 Time to replace it. 😁👍

[@DIYwithMichaelBorders]

@@rgrrgrsxndngr1904 That means the world to us, we subscribed to your channel as well. Us DIYers need to stick together!!! 😎👍

[@NORIaquaCh]

Loathe this car. It's like it was designed to fail from factory.

[@jayjackson383]

ouch

[@Perilsphere]

Literally. First nice car I buy myself and it's this piece of actual shit.

[@rhondacollier50]

thank u so much

[@thewrdudes4536]

It is

[@herbivore7108]

My 2014 Cruze (bought it new) has 160000+ on the odometer. Just today the coolant reservoir started leaking coolant. Thankful I got that many miles out of it before having to replace the reservoir. But yes all these new vehicles with cheap plastic parts under the hood are designed to fail 😤

[@codygalloway3228]

What do you recommend for cleaning coolant and oil off of an engine? It’s looking pretty bad inside my engine. I’m doing some work on it soon. Would like to clean it up at the same time.

[@DIYwithMichaelBorders]

Good morning, just poured a ☕️ and am sitting down to answer any and all questions for the DIY community. Great question, and that will depend on who you ask. Most important thing to do is stay away from spraying your engine with a hose of water or any cleaning products being carelessly sprayed all over engine. Both of which can cause havoc to your electrical system as it will likely get many of the internal engine component electrical sensors wet…which leads to the sensors acting very sporadically and acting as if they are faulty. The - spray cleaning product on a paper-towel and dap/wipe clean engine is the best method. Below is a link to a cleaning product we like. If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases. amzn.to/41bt4sr Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@ameliawatson7931]

U rock i went to every auto part store and no one i mean no one knew what the hose and water valve was called

[@DIYwithMichaelBorders]

Melia Unknown Thanks for watching & we appreciate you reaching out to us. Glad to help, us fellow DIY’ers need to stick together! 😎👍🔧🔩

[@OfficialPizza]

Great video. I have been having bad coolant leaks on my Sonic. Replaced the water outlet today and started it up, just to find the second leak -- the water pump. Your video helped me name the part now that I had located it. Thanks!

[@DIYwithMichaelBorders]

Thanks for watching & that’s no fun. Sounds like you have another DIY project in the days to come. Let us know if you have any questions. Us fellow DIY’ers need to stick together! 😎👍🔧🔩

[@A_Son_Of_Yahuah]

Thanks for the video. My 2017 Chevy Sonic is leaking antifreeze bad and fast. Don't no wear it's coming from. What's the average cost to get it fix❓PLEASE don't say in the thousands 😥

[@POPINTHETAPE]

Just installed my new coolant reservoir. Feels good. Only problem is when I filled it up, it continues to leak somewhere (just as the old one did) it’s disappearing in less than a minute. Only reason I replaced it is because a friend of mine, who has more experience than I do, took a look at the old one and suggested that that’s what it was. I seen a leak from somewhere under the old coolant tank but couldn’t point out exactly where it was, which is why I was quite sure it was the coolant tank itself. My problem is that it keeps saying “AC off due to high engine temp”. Had my thermostat and radiator replaced last year. Water pump replaced at the end of July.

[@DIYwithMichaelBorders]

Thanks for watching & sharing this, any update? The best way to pinpoint the leak is have your engine running to allow the system to pressurize. Once system is pressurized, it will hopefully be easier to pinpoint the exact location of the leak.

[@POPINTHETAPE]

@@DIYwithMichaelBorders yes, it’s still leaking somewhere. I can’t tell. I did pour the coolant in there while it was off and then ran the car. My car stalls and the engine knocks in idle.

[@DIYwithMichaelBorders]

@@POPINTHETAPE Thanks for the update, is your engine not running long enough to allow the system to pressurize?

[@anikajohnson4418]

Did you find the problem

[@POPINTHETAPE]

@@anikajohnson4418 yes, i can’t find the recipets but I remember exactly because it costed me about $1100. I had to get a new valve cover replacement and have old oil around the engine cleaned, thermostat housing assembly and a water outlet valve. I no longer have the Cruze now.

[@KarenKelleylucky]

Michael - I have replaced the hose that you're pointing at around 3:02 in your video. I've replaced the thermostat housing. However, I still have a leak that continues to spray on top of that larger fat hose in the bottom - below the hose you're pointing at. HELP! I had a full tank one day and gone the next. I can't figure out where it's leaking! What is that larger fat hose?

[@DIYwithMichaelBorders]

Karen Kelley Thanks for watching & we hope the video helped. Let’s get this figured out together Karen. The hose shown at the 3:02 mark is a Dealership only part. We recommend contacting your local Chevy dealership & providing them with the last 8 digits of your VIN #. They will be able to get you the exact replacement hose for your exact vehicle. This house has two ends and uses the adjustable clamps to secure themselves.... One connects to the radiator while the other one connects to your thermostat. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@ballzac4209]

Bro thank you.i didn't know what the part was named, but the water outlet valve is leaking down where it connects to the engine

[@DIYwithMichaelBorders]

Hey what’s up, you are very welcome. If it helps, below is a link to a video showing us replacing that part. kzbin.info/www/bejne/jmK2aZ-fg92Mg9U 😎👍

[@JacobBennington-yx1pg]

How's the car now

[@Teetee96]

I have a 2013 Chevy Malibu, dealership told me my water pump is cracked and leaking and would have to pay 500.00 to replace...I know nothing about cars.. do you know anywhere that will replace for cheap if I buy the part?

[@DIYwithMichaelBorders]

Ti'Ara Young Thanks for watching & sharing your experience. By chance is your Malibu still covered under warranty at the dealership? If yes, they will replace your Water Pump free of charge. $500.00 is kinda the going rate if you have a shop fix it. This covers all parts & labor & all new coolant. Keep us posted, we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@justtisha]

Such a GREAT walk through! I'm pretty sure the bottom of my thermostat is leaking!

[@DIYwithMichaelBorders]

Thanks for watching, keep us posted.

[@agateenchantmentrockwizard5969]

Hi and great video! Sub'd. Just replaced the water outlet valve/heat temp sensor assembly (the original plastic cracked) and upon checking for leaks I noticed some "weeping" at the top of the valve, where your finger is as you point to it at 1:46. I installed a brand new OEM AC Delco and I'm wondering if you have any ideas 💡 on how to do a minor fix on this verses R & R the entire heat temp/water valve assembly? I thought of pulling the clip, pulling the return hose and wrapping this water return valve with a tiny amount of high temp plumbers tape to stop the minor weeping, I'm experiencing. Any thoughts? Thank you in advance ☺

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. That hose is a dealership part only & will need to be purchased from your local Chevy dealership. The hose itself is a very friendly DIY project. Below is the link to our video showing how to properly replace it. kzbin.info/www/bejne/fH-7moVnmdRljdU Keep us posted. Thanks for subscribing, we subscribed back. Enjoy your day. 😎👍🔧🔩

[@agateenchantmentrockwizard5969]

@@DIYwithMichaelBorders Hi and thank you. However this OEM part is available on Amazon and at O'Reillys too

[@DIYwithMichaelBorders]

@@agateenchantmentrockwizard5969 Very cool, you may be able to get it at a more friendly price online. 😎👍🔧🔩

[@andyg9859]

excellent easy to follow videos Michael i can relate all repairs to my holden cruze in Australia which is awesome!! there is a small hose directly straight down from the oil filler cap its insulated in a flexible silver . type foil. it connect to the underside of the valve you are showing in this video.i have the slightest leak from that connection . its looks awkward to remove i have been searching for a video from someone else who has had that same issue, any feedback would be greatly appreciated, thanks again you are saving me heaps in repairs

[@DIYwithMichaelBorders]

Andy g Thanks for watching & sharing your experience. Sorry for the delay. What’s your update? Have you fixed leak? Unfortunately we are away from vehicle for a week. Keep us posted on your DIY project. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again Andy g. 😎👍🔧🔩

[@agateenchantmentrockwizard5969]

Excellent troubleshooting video, thank you

[@DIYwithMichaelBorders]

Agate Enchantment & Rock Wizardry Thanks for watching & you are very welcome! We appreciate it. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@ashrafsiddiquee3190]

I have a leak in that return hose towards water valve on 1:38(video). Do I need to replace the resavore and the hose ? I have this exact leak and I'm having a smell of burned rubber. What shell I do ? Thanks

[@hunnybadger2445]

you skipped the hose i need the name of ;-; the one above what your pointing at in 4:37 it returns to the water outlet

[@hunnybadger2445]

its a inlet heater hose #42348374

[@DIYwithMichaelBorders]

Thanks for watching. We weren’t sure if you were referring to the Return Hose. Below is a link to our video showing replacement of Return Hose. kzbin.info/www/bejne/fH-7moVnmdRljdU Keep us posted on your project. 😎👍🔧🔩

[@adunn9498]

thanks for the video, i had a new housing and thermastat still loosing coolant so i think its the coolant tank itself, i need to find a good mechanic.

[@DIYwithMichaelBorders]

So happy to help, thanks for watching. If there any questions we can help answer, let us know. 😎👍

[@ThatGuyJesse619]

What’s the big hose called connected to the coolant reservoir under the small one

[@DIYwithMichaelBorders]

@@ThatGuyJesse619 Thanks for watching. This is a standard coolant inlet hose. Do you see a part number on the hose? We can help lookup the exact OEM replacement hose for your exact Cruze.

[@ThatGuyJesse619]

@@DIYwithMichaelBorders no I don’t, I’m out of town and it’s my wife’s car, but there is an R on it , I have a picture of it I can email you

[@DIYwithMichaelBorders]

@@ThatGuyJesse619 Thanks for the reply, this is the best way to stay in contact with us. Another option is to contact the local Chevy dealership and provide them with the last 8 digits of your VIN number. They will be able to look up your exact replacement hose for your exact engine.

[@nickretay335]

I replaced the engine thermostat about a week ago as I noticed it was leaking around that and underneath. Wasn't easy but watched your video to do it and saved myself some money. However the coolant reservoir tank is now low again. I've looked everywhere and can't pinpoint where it might be leaking. Any suggestions? I might just take it in to get diagnosed and go from there.

[@carlward9367]

Did u ever find out where it was leaking

[@paiweonskycuevasmartinez5160]

Thanks for the video, I've been looking for that 3 way connection point, you mentioned in the video. I have no found it , is there an specific name for it. I'd appreciate it , my chevy leaking coolant from it

[@DIYwithMichaelBorders]

Paiweonsky Ezequiel Thanks for watching. We believe you’re referring to the Water Outlet Valve. Hope the video helped. Keep us posted on your project. 😎👍🔧🔩

[@steveh8224]

My mother inlaws has antifreeze leaking from around the rear driver side of the car, we noticed a large puddle forming around the tire while parked in the garage. Could it be traveling from somewhere in the engine compartment?

[@DIYwithMichaelBorders]

Thanks for watching, that’s odd. Are you 100% sure it’s coolant, or is it brake fluid? If it’s brake fluid, it’s likely to be a leaking brake line near that wheel. If it’s coolant, is it coming out of the exhaust and spraying near rear tire…?…if so…it’s likely that your internal seals are allowing coolant into the combustion chamber and being burned and sprayed out exhaust. Keep us posted. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@steveh8224]

@@DIYwithMichaelBorders definitely coolant, I'll head over there tomorrow to take a better look. Ty for the quick response.

[@DIYwithMichaelBorders]

@@steveh8224 Happy to help. That’s a bummer you’re experiencing a leak. We will be here to help you get it figured out. 😎👍

[@shelbyrenova7378]

Helpful! My car has been overheating the last few days and doesn’t keep coolant, yet I can’t seem to find a leak anywhere?

[@DIYwithMichaelBorders]

Shelby Stone Thanks for watching Shelby, that’s odd. You may have a small leak allowing Coolant to exit system & run onto a hot portion of engine. At this point, your Coolant may be hitting hot surface & evaporating before hitting ground. We recommend doing your best to look for any signs of evaporated leak stains. We need to pinpoint the location of leak to allow us to zone in on which part to replace. 😀 Keep us posted. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again!

[@nightman4437]

Look by water pump on side by belt

[@JavierHernandez-xw8vj]

I have a leak on my 2013 Chevy Cruze. I have replaced the reservoir tank, cap, the return hose leading to the reservoir tank and the turbo assembly. All these parts had a leak but after replacing them it still leaks. Tomorrow I will change the thermostat and hope this will be the last part I needing to be replaced.

[@mezar4854]

My wife's 2014 Chevy Cruze thermostat has just begun to fail at 70,XXX miles. It's the one connected to the water pump on the left side of motor when facing vehicle for reference on lifetime of part. The coolant reservoir and connecting hoses all failed at 60,XXX miles for reference, all parts were replaced with Dorman parts well worth it about 35.00 Part in question is at @3:10

[@DIYwithMichaelBorders]

Good morning & welcome to the DIY Raptor Club. That’s a great idea, dorman has really helped many Cruze owners with their increased design & parts quality. Hopefully many stress free days ahead for you after replacing the Thermostat. 😎👍🔧🔩

[@mezar4854]

@@DIYwithMichaelBorders update the thermostat housing connected to the front left of the motor was a 2 part failure first was the rubber gasket, which is to be expected, nothing last forever. However after closer inspection of the housing the plastic tabs on the inside holding the plate and spring in place both had broken. So the valve was never fully closed and couldn't create a flush seal causing additional wear on gasket. Very interesting part, wish I could upload photos 📸 of the part for reference, part @ 3:10 for reference

[@DIYwithMichaelBorders]

@@mezar4854 Thanks for the update & have you completed replacing Thermostat? If not, below is a link to our video showing replacement of Thermostat. kzbin.info/www/bejne/bneQYmqthKmUmrM 😎👍🔧🔩

[@mezar4854]

@@DIYwithMichaelBorders the linked is the one I used to replace that actual part ty! The next thing I plan on replacing is a pulley and a serpentine belt, one of them is squealing on idle and driving

[@DIYwithMichaelBorders]

@@mezar4854 Very cool, below is a link that may help you. kzbin.info/www/bejne/ZqaQq3atj8qsi9E 😎👍🔧🔩

[@wanderleismith2539]

Having leaking issues right now in 2012 Chevy Cruze rs. Thanks for the video.

[@DIYwithMichaelBorders]

You are very welcome, keep us posted on your project & any questions you may have. 😎👍🔧🔩

[@joel4214]

Wow, thank you so much! I'm losing coolant and can't find a leak anywhere. This helps out a ton.

[@DIYwithMichaelBorders]

Joe L Thanks for watching Joe, losing coolant is no fun. 😲 We are happy to help & please keep us posted on your DIY project. Us fellow DIY’ers need to stick together! 😎👍🔧🔩

[@FootballClips7]

Did you find the leak? I have the same issue. I’m losing coolant and can’t find the leak

[@waynechernick3526]

It's the Coolant Reservoir. Took me 6 years to figure that one out.

[@garymorton7922]

did you ever find the leak? we still looking at ours for the mysterious leak!

[@joel4214]

@@garymorton7922 unfortunately not and i don’t have the cruze anymore, sorry!

[@The1bigTROUBLE]

Thanks for the viseo. It's really helpful. Now I got an idea where to look. Thanks. Hope its just the valve 🙏🏾

[@DIYwithMichaelBorders]

You are very welcome. Keep us posted on your project as you work through it. We are here to answer questions. Us fellow DIY’ers need to stick together. Welcome to the DIY Raptor Club. 😎👍🔧🔩

[@justinfever9787]

My defroster on my 2012 Cruz dose not work anymore; and im noticing a burning smell when I stop at stop signs,and when my heater is full blast I smell the same but in smell constantly. Im not seeing any leaks on the ground at all. I'm baffled by this. Any ideas???

[@DIYwithMichaelBorders]

Justin Fever Thanks for checking out the video and sharing your comment! A burning odor coming from your engine is no fun! Have you pin-pointed the exact cause? Your defrost not working may be related to a blockage. Sometimes objects & debris fall into the vents & block the heat. Once blocked, the object heats up & can possibly begin to melt/burn...leading to a not so pleasant odor. It can also be a failing Compressor pulley...causing your burning odor. Below is a link to our video that explains more about the compressor. kzbin.info/www/bejne/oGquk5pjrM57fJo As far as the defrost, grab a flashlight & try and see if you can locate anything inside the vents that may be blocking your airflow. Any burning odor from engine requires immediate attention & no driving in our opinion. Keep us posted, we will figure this out together! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@davycrockett4395]

Well I've replaced the first 3 hoses you started out with and the reservoir I've got the front of the car about halfway off trying to replace the radiator hose. Smh I've yet to find a video on it I've looked everywhere.

[@DIYwithMichaelBorders]

Thanks for watching, any update? We don’t have a video at the moment showing replacement of Radiator hose.

[@davycrockett4395]

No not yet

[@angelhamblin1357]

I found a leak in mine and I am having a hard time find a replacement hose. It is a hose that comes off of the water outflow valve and has the covering around it to protect it from the heat. Do you know the name of that hose so I can find a replacement?

[@DIYwithMichaelBorders]

Thanks for watching, the best thing to do is contact your local Chevy dealership and provide them the last 8 digits of your Vin number. They will be able to get you the exact replacement hose that you are referring to for your exact engine. This will ensure that you do not accidentally purchase a non-compatible hose.

[@mikeillaoi9198]

I have a 2014 cruze diesel don't know if it's different but my coolant reservoir is empty and when I fill and drove it it drained fast but I don't have milky oil I'm so confused as to where it would go

[@DIYwithMichaelBorders]

Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. We have an idea on where it’s going. Chances are it making its way past the engine seals and into the combustion portion of engine where it is being burned off and pushed out the exhaust pipe. Do you notice any discoloration at end of exhaust pipe or white smoke coming out of exhaust? Both are indicating that the coolant is being burned off with no trace of external leaks. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem. toolboxtoken.com Reach out to us any time! 🧰

[@Imgordinho]

Man been replacing these damn coolant problems and its always the same thing , i wanna buy a new car but prices are to high so i have to keep this car for a while 🤦🏻‍♂️

[@DIYwithMichaelBorders]

Thanks for watching & we definitely understand. This coolant system has kept Cruze owners busy.

[@Gamergalcrazy]

I have some bubble in the actual reservoir tank, & coolant is lacking from the left as soon as you put it in I have check the reservoir tank no leaks. I have replaced the radiator and the fan three months ago. But it shows no signs of overheating just smoking and bubbling in the tank it self. Now soon as you put any antifreeze in it runs right out on the left side any suggestions.

[@Gamergalcrazy]

*leaking

[@rams6992]

Found a leak along the radiator hose on both sides it seems. What are the chances it’s just the hose and not the radiator itself?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. It’s very possible & that would definitely be the friendlier of the two projects. Keep us posted on your project. Us fellow DIY’ers need to stick together! 😎👍🔧🔩

[@diegoreyes3779]

What’s the name of the bottom coolant reservoir hose and can I find it on Amazon

[@DIYwithMichaelBorders]

Thanks for watching, welcome to the DIY Raptor Club. That’s just a regular coolant hose. The best thing to do is contact your local Chevy dealership and provide them with the last 8 digits of your vin number. They will be able to get you the exact replacement part number for your exact engine. Whether you purchase it from the dealership or elsewhere is personal preference. 😎👍

[@SpectrumAudiophile]

What's the first hose you touched (on the left) after the W.O.V. called, and where might I find a replacement? It just bursted and left me in a cloud of smoke and disappointment. Having a hard time finding it online without knowing 😖

[@DIYwithMichaelBorders]

You are very welcome & we appreciate you for reaching out to us. If you are referring to the lower & larger hose, this is your reservoir’s lower coolant feed hose. We recommend contacting your local Chevy dealership & providing them with the last 8 digits of your VIN #. Ask for the lower coolant hose that feeds off the bottom portion of your reservoir tank. They will be able to get you the exact part for your exact engine. Keep us posted. Hope all is well. Enjoy your weekend. 😎👍🔧🔩

[@KayLee-vg6yg]

Video @2:57 what would you change at connection point and the hose? That's exactly where it's leaking. T.I.A

[@DIYwithMichaelBorders]

Kat FISH Thanks for watching and sharing your question. Great question & that lower hose is very important. You will notice a securing clip on the top portion of the connection point that the hose feeds into. In the event that that securing clip is shifted up or popped off and has become loose, the built-up pressure inside your coolant system will actually force coolant out of the tiniest seams of that loose connection point leading to leaking and loss of coolant. We recommend inspecting that connection and hose. Look for any signs of stress as well as verifying that securing clip is properly secured. Keep us posted! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@adamjc9683]

Is the metal clip from the Water Outflow Valve present anywhere else in a 2014 Cruze? I have a leak somewhere, and I found one of those clips in my driveway, but the one on the WOV is still there.

[@DIYwithMichaelBorders]

Adam Crawford Thanks for watching & we hope you enjoyed the video. There are compression clamps all over the Cruze engine...they are very tricky & annoying to get off... it’s very unlikely that one just fell off. Many more helpful videos to come. 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩

[@True_Joker]

Just a bit of information to add, as a correction to your video. At/around the 2:30 minute mark of the video when you mention the radiator cooling fan, you are incorrect on what that fan does. It does not blow air against the engine. Those fans are designed to blow air against the radiator in order to cool it. It is a big misconception that a lot of people have.

[@Marielitza1]

Ok. You mentioned something interesting. Tell me I have a 2013 chevrolet malibu Lt. I parked my car, open the hood and started the car and the radiator fans don't started working and my car, never get heat. The radiator fans only start when...? (I ask you, you seems like you know some mechanics)

[@gedafe]

Mike, great videos as always. My 2013 1.4 just sprung a coolant leak in the pipe/hose that exits under the heat shield and exhaust manifold, below the oil cap. The leak is at the crimp where the pipe meets the hose. Ever see that, and if so, do you know any fixes aside from taking it into the dealership? Thanks in advance!

[@DIYwithMichaelBorders]

Thank YOU Gerald for sharing this. Is your leak at the actual fitting or have you determined the hose itself is leaking and dripping down onto the fitting. Over time, the hose can warp to a point where the pressure clamp is no longer creating the required seal. To get the exact replacement hose, we recommend contacting your local Chevy dealership and providing them with the last 8 digits of your vin number. They will be able to get you the exact replacement hose for your exact engine and hopefully you can quickly get this leak fixed. 😎👍

[@hamdyelsyed979]

Can bad thermostat lead to the car doesn't catch speed and doesn't shift automatically as the RPM is very low and if I keep pushing gas the engine dies

[@DIYwithMichaelBorders]

@@hamdyelsyed979 Thanks for watching, not necessarily related however we can’t rule it out as a possible cause. It’s more likely that worn out spark plugs and wires, as well as dirty air filter can lead to this.

[@veronicarodriguez3496]

My 2012 Cruze took a dump today. I got home from work and as soon as I shut down the car, steam filled the garage and I could smell the coolant. The puzzle of water/ coolant was on the driver side. When raised the hood, I could see the spray on the driver side of the car. What could it be? I couldn't tell where the leak wad coming from since everything was wet.

[@DIYwithMichaelBorders]

Veronica Rodriguez Thanks for watching & sharing your experience Veronica! Let’s get this figured out together! Have you inspected all parts related to your Coolant System? You mentioned the Coolant was more on the drivers side. This leads us to the Reservoir, Water Outlet Valve, or any one of the rubber hoses connected to these two parts. We recommend completing a thorough inspection of the parts shown in this video and try to pinpoint where exactly your leak is coming from. Make sure all Coolant Hoses are properly connected & secured to their respective connection points. Let’s start there! Keep us posted! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@esibrian81]

What is the hose under the radiator hose from the thermostat? Is it air ?

[@DIYwithMichaelBorders]

EMERSON SIBRIAN Thanks for watching. So glad to help. The hose that feeds off of the Thermostat & travels down to the Radiator is an additional Coolant hose. Hope this helps. Us fellow DIY’ers need to stick together. Many more helpful videos to come. Please subscribe to the channel and ring your KZbin bell 🔔 this will be very helpful to us thanks again. 😎👍🔧🔩

[@Jalan_with_herman]

My cruze experiencing coolant loss but no leak and running fine..what would be the common problem for this ?

[@DIYwithMichaelBorders]

Good morning ☕️ any update. This is usually the symptom of the internal seals wearing out and allowing coolant to leak into engine area that it’s being burned off and pushed out the exhaust. When this happens, white smoke will be visible coming out of exhaust…however not always.

[@neonbluetree]

That 3 point connection at 4:28 cracked on my car and I can't seem to find a replacement for it. Does anyone know where I can find it? Im also wondering if its just a 3 point connector on its own, or part of a different part altogether? Thanks

[@DIYwithMichaelBorders]

neonbluetree Thanks for watching & we hope the video helped. Unfortunately that exact part is a “Dealership Only” part & is not available anywhere else. We recommend contacting your local Chevy Dealership & providing them with the last 8 digits of your VIN #. They will be able to use your VIN # and get you the exact replacement part for your exact car. Keep us posted. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩

[@russkaine]

the hose that goes from the radiator to the thermostat when i pull up on the hose a little where it connects to the thermostat coolant leaks out...i replaced the hose and still does it...it doesnt leak until i acyual grab it and pull up slightly....i bought the thermostst at auto zone it was a duralast...is that normal?

[@DIYwithMichaelBorders]

Thanks for watching & the Duralast brand is a brand we recommend for sure. You will want to ensure that the hose itself is shifted far enough onto the thermostat and then the locking clip is properly aligned and able to be shifted down to create that lock. It shouldn’t leak if new. Keep us posted.

[@russkaine]

@@DIYwithMichaelBorders it doesn’t leak when I drive but if I grab it and slight lift coolant will drip out…I bought a new hose and warrantied for a new thermostat and it still does it.

[@DIYwithMichaelBorders]

@@russkaine Thanks for watching, that’s odd...& not normal...🤔 You can install a standard screw-tight clamp from AutoZone & carefully install it onto hose to create water tight seal.

[@robertponce2074]

Mine is leaking coolant right where the clip is at and is dripping down on the frame then to the floor. Do you recommend a new hose or a new reservoir ?

[@DIYwithMichaelBorders]

Robert Ponce Thanks for watching & sharing your experience Robert. If your leak is located at the connection point where the clamp secures hose to Reservoir, it’s most likely your Reservoir. You may just need to tighten the clamp ever so slightly. Keep us posted! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@DIYwithMichaelBorders]

Robert Ponce Below are two links that you may find very helpful. First link is to a video explaining the differences between the OEM reservoir and the aftermarket reservoir. kzbin.info/www/bejne/ioO3aJh8mdScrZY The second link is to a video showing the step-by-step process of replacing your reservoir tank. kzbin.info/www/bejne/j5qwd5yFoMuNgNE Hope this helps! 😎👍🔧🔩

[@anaisvazquez4332]

What is the name of the valve that connects to hose that connects to the reservoir tank. Water _____ valve? Couldn’t catch the middle word

[@DIYwithMichaelBorders]

Anais Vazquez Thanks for watching. Water Outlet Valve. Keep us posted on your project. Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@nickirios9879]

I have a leak on the bottom of the hose that is under the purge valve in my 2013 chevy cruze 1.8 liter. Could this be because of a faulty purge valve? Or something else? BTW, Thank for your videos they are helpful for us non mechanics lol

[@rev-on]

My car has major leakage yet the temperature isn't overheating? I looked inside and it looks like its coming out of the water outflow valve. Is that a diy project? Or do I need to see a professional?

[@DIYwithMichaelBorders]

Thanks for watching, the water outlet valve is a DIY project if you’re willing to put in the work. We have attached a video link below that will help get you more familiar with the replacement steps. kzbin.info/www/bejne/jmK2aZ-fg92Mg9U You can use this video to help determine whether or not you feel comfortable making it a DIY project or taking the vehicle to the shop.

[@rev-on]

@@DIYwithMichaelBorders oh thank you so very much. I really appreciate it

[@DIYwithMichaelBorders]

@@rev-on So happy to help, looking forward to hearing back from you.

[@juliangutierrez3103]

What about the bypass hose under the heat panel? You never mentioned that.

[@DIYwithMichaelBorders]

Julian Gutierrez Thanks for watching Julian. We hope the video helped. We appreciate you sharing your info. Have you recently had a leak at the bypass hose location? Fill us in with what you experienced, that would be very helpful to us & viewers. Keep us posted! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@GadGetHackss]

You forgot the turbo coolant hose behind the manifolds, very common because it's exposed to lots of heat

[@GadGetHackss]

you don't notice it because the water drips on the turbo and evaporates

[@DIYwithMichaelBorders]

Thanks for sharing this, definitely helpful info. 😎👍

[@DIYwithMichaelBorders]

@@GadGetHackss So true!! 👍

[@Arianna571]

We have a 2012 Chevy Cruze we replaced the water pump thermostat is not leaking. Took it for a test drive no problem. Went out again and we saw a line of water behind us and lights came on saying overheating any suggestions?

[@DIYwithMichaelBorders]

Arianna571 Thanks for watching & sharing your experience. An overheating engine is never fun. We recommend verifying you have the Coolant levels within the systems proper fill parameters. Low Coolant can cause issues. Next, your Water Pump may be beginning to fail. The actual part that your Thermostat connects to is your Water Pump. Once this fails, it no longer moves Coolant through your engine properly & leads to overheating. Unfortunately it’s a very common failure in the Cruze vehicle. Keep us posted. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@victoriavictoria9455]

I can't find where my coolant is leaking from. It drips near the front of my car on the driver's side. The coolant tank is always empty. Someone PLEASE help!!

[@tylerbolton1534]

"Many years" my tundra has survived 14 years no maintenance like my gf pos chevy which is only 4.

[@DIYwithMichaelBorders]

Tyler Bolton Thanks for watching Tyler, let us know if you have any questions. 😎👍🔧🔩

[@LS-tv5hp]

Dude facts. My truck is a 2010. Never had any problems high miles, then she buys a 2014 Cruze. Replaced three components in her coolant system that have cracked or leaked just this year! On this video because she just called me on her way home with another low coolant reservoir. Very disappointed with Chevy

[@williamstru2119]

Ha ha. I’m a Toyota guy and have ran a few over 400k miles and still run them for work. Stupid Cruze is always a problem.

[@moe2931]

on my way to buy a damn tundra then second time i have a leak in the last 6 months

[@RedBeard_1911]

Lmao dang, no maintenance at all in 14 years?

[@petramarquez4513]

My car overheated yesterday & it was low on coolant, I filled the resovouir and it did good, Untill today after work I got home and noticed nothing till right now I came to the store and when I turned it off noticed some steam coming out and noticed my passenger side has some splashes and noticed my resouvir (however you spell it) has almost no coolant left. It did not overheart but did notice some steam and smelled like coolant. Can you give me an idea of what it could be?

[@jedibbq]

You recommend the Dorman replacement reservoir? Do you know the part number by any chance?

[@DIYwithMichaelBorders]

jedibbq Thanks for watching & sharing your question. The Dorman brand reservoir is definitely a better designed & built product in this case. Below is a link to our comparison video explaining the difference between OEM & Dorman. You may find this helpful. kzbin.info/www/bejne/ioO3aJh8mdScrZY Keep us posted with any questions you may have. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@amandatyler1726]

I cant find my leak! It's to the right of the engine, I can see it drip down in there somewhere but idk where the drip is coming from! Help! 2014 cruze

[@joshlewis2530]

It is probably the water outlet piece he mentioned right after the reservoir. Didn't show it very well though

[@bobbymiller8563]

I wish you gave GM part numbers to order each hose

[@savanahfowler8236]

My Chevy is leaking exactly where you showed where it usually leaks at the bottom. I already replaced it months ago. Could it need to be replaced again ?

[@DIYwithMichaelBorders]

Thanks for watching & unfortunately, it may need to be replaced again. Your not the only Cruze owner experiencing this. Keep us posted. 😎👍

[@troysmith3713]

I’m getting a leak somewhere close to my passenger headlight under my bleeder at the bottom by the hose but it’s not coolant that’s leaking it’s oil. I get white smoke out the tailpipe on startup. And when I pull the dipstick out it’s hissing. You have any idea what it could be? I thought it was the valve cover and I changed it but I’m still getting a leak and the smoke out my tailpipe.

[@carlward9367]

Head Gasket

[@Jacob1986]

I checked all the places cant find mine , mechanic says prob water outlet because it might so small that it just dries up fast. Im not sure maybe ill replace

[@DIYwithMichaelBorders]

Jacob1986 Thanks for watching. That’s definitely possible. Let us know if you have any questions. Us fellow DIY’ers need to stick together! 😎👍🔧🔩

[@Jacob1986]

DIY With Michael Borders i read the coolant cap could leak . It has 2 gaskets if you see coolant past the 2nd one its leaking bought a new dorman one on amazon gonna try

[@DIYwithMichaelBorders]

Jacob1986 Very cool & thanks for the update. When your new cap arrives and is installed, definitely let us know how it performs. 😎👍🔧🔩

[@andrey934]

Can I change engine oil cooler by myself ?

[@DIYwithMichaelBorders]

Thanks for watching, that’s a DIY project if you have the right tools for sure. We don’t have a video on that specifically at the moment however are here to help answer questions.

[@deborahdunn-davis463]

if someone puts in a thermostat wrong can that cause coolant leak?

[@DIYwithMichaelBorders]

Thanks for watching & it definitely can. Inside the thermostat is a rubber gasket and if not properly placed in position when securing the thermostat to the water pump, it won’t create the water tight seal it is designed to do. Welcome to the DIY Raptor Club. Keep us posted on your project. 😎👍🔧🔩

[@johnnelson7457]

You know anything about the turbo coolant line leaking right next to that big metal shield?

[@DIYwithMichaelBorders]

John Nelson Thanks for watching & we hope the video helped. We haven’t actually worked on that yet. What’s your update? We really enjoy making these helpful videos for our fellow DIY’ers. Many more DIY videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@johnnelson7457]

@@DIYwithMichaelBorders well I have a turbo coolant hose I believe right next to the turbo sheild

[@DIYwithMichaelBorders]

John Nelson Thanks for the reply. This is a pretty friendly DIY repair. You may find it best to purchase new hose directly from the dealership. They will need the last 8 digits if your VIN # & Will be able to get you the exact replacement hose for your exact vehicle. Keep us posted. 😎👍🔧🔩

[@Matt_Burns]

Great video! Thanks for taking the time to make this. You’re the man!

[@DIYwithMichaelBorders]

Matt Burns Thanks for watching! Let us know if you have any questions! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@DIYwithMichaelBorders]

Matt Burns We appreciate you taking the time to reach out to. You Rock! 😎👍

[@selinagarcia1771]

I replaced thermostat and I replaced the water reservoir and today coming home I opened the hood and smoke was coming from the engine. It had the same smell when my old water reservoir would leak.

[@DIYwithMichaelBorders]

Selina Garcia Thanks for watching. Have you pinpointed the exact leak location? Let’s get this figured out together! Let us know if you have any questions. Many more helpful videos to come! Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@latricemaxwell7211]

So is any of those leaks expensive fix?

[@DIYwithMichaelBorders]

Thanks for watching, you will find these to be very friendly DIY projects in regards to price. If vehicle is taken to the dealership or shop, it can get pretty pricey real fast. Let us know if we can help answer any questions to help you accomplish some DIY repairs on your Cruze. 👍🧰

[@m.a.6667]

Their is one more leak that needs to be mentioned and that is the coolant line that goes to the Turbo could Start leaking like mine did.

[@dantam8]

Coolant is puddling up on the highest part of the transmission and flowing down from there. I can't find any signs of leaks from the hoses and I had the water outflow valve replaced last year. Is it possible that the leak is from the water pump or thermostat on the other side of the car and it's just flowing down to the driver's side of the motor?

[@DIYwithMichaelBorders]

Thanks for watching & reaching out to us Dan. The water pump & thermostat parts are definitely areas to focus on. Both of which can wear out over-time & lead to coolant leaking. To give yourself the best chance to pinpoint the leak, have the engine running as this will pressurize your coolant system and lead to coolant being pressure leaked out of the exact leaking point. Be extremely cautious and careful as you look for leaks because the coolant can get hot, you do not want to burn yourself.

[@TankHandy]

My leak is comming from passenger side. Most of my coolant is under where you said the water pump is does this mean new water pump or new water pump gasket?

[@DIYwithMichaelBorders]

jarvis handy Thanks for watching & sharing your experience jarvis! Let’s get this figured out! We recommend starting engine & allowing engine to warm up to its normal operating temperatures. As your engine warms up, the Coolant System will pressurize. At this point, we recommend doing a thorough inspection of exactly where the coolant is leaking from. If it’s clear that the coolant is leaking from the Water Pump, this is an indication that your Water Pump & Gasket must be replaced. It’s always recommended to replace both Water Pump & Gasket at the same time. Keep us posted, we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again jarvis! 😎👍🔧🔩

[@TankHandy]

@@DIYwithMichaelBorders thank you. Your awesome btw ill keep you updated after i replace it!!

[@DIYwithMichaelBorders]

jarvis handy Awesome Awesome & we really appreciate it jarvis! 😎👍🔧🔩

[@dustinharland3991]

I am leaking coolant in puddles in a 2013 Chevy Cruze LT RS. I notice the puddle mostly when at my girlfriends house on their concrete drive way which is on a slant. I’ve put the car on my dads lift and noticed lots of what looks like orange/red coolant traveling down the sides of the radiator and collecting on the bottom of the two radiator tubes at the bottom of both sides of the radiator. All the while coolant sprays on my motor in two spots and then travels down towards the bottom of my motor by my converter I believe as well as my oil drain cap Could this be from the gasket to the hose that goes to the pump from the radiator?

[@DIYwithMichaelBorders]

Thanks for watching & we appreciate you sharing this. The best thing to do is start engine & allow engine to warm up & reach normal operating temps. At this point, the coolant system will be fully pressurized and you will be able to pinpoint the exact location that coolant is leaking. Be careful to not touch any portion of engine nor coolant as it will be HOT. If it’s leaking from in-between the engine block and a part specifically, the inner gasket may have failed allowing coolant out which then must be replaced. If it’s leaking from a hose fitting or in the middle of a hose, the hose clamp may need to be tightened or the hose may need to be replaced.

[@bradpriest8895]

Hello, I have a 2011 Chevy Cruze and recently it’s been leaking coolant. I took it to 3 mechanics and they all checked the car and hooked it up to find 0 leaks. I’m refilling coolant weekly now 😩 Any ideas or a good mechanic you recommend?

[@marcusa.6723]

Brad Priest any luck?

[@isaiahspinney6113]

Another place coolant “dissapears” is through a bad head gasket where it burns through the engine this not leaving any signs of leaks except of course your reservoir is always empty

[@guest1234-d3p]

Hai. My chev malibu 2013 model leak at the piping which connect to the heater hose... Can i just by pass this heater hose by just putting a rubber stopper ? Is there any other thermostate because, the original is not suitable for my country humid & hot climate country in brunei, borneo island. Please shsre advice..

[@courtneyhoward8149]

Could you name the hose that go to the turbo and maybe show a picture

[@josuepimentel5944]

My 2014 Cruze has sludgy gunk in the cooler do you think it’s oil and coolant mix

[@DIYwithMichaelBorders]

Josue Pimentel Thanks for watching & sharing your experience. It’s very likely you have a combination of mixture causing your sludge. We have seen in the past that it’s a combination of cheaper grade coolant & grime within the coolant system hoses causing it. Are all Coolant hoses the original hoses as well? Have you had any recent experience with burning oil & higher engine temperatures as you drive vehicle? Keep us posted. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@giantdvl]

We are replacing the engine of our 14 Cruze RTZ RS. Changed the oil and it looked like a rootbeer float. Having to replace with a remanufactured engine with 53k on it.

[@A_Son_Of_Yahuah]

Thanks for the video. My 2017 Chevy Sonic is leaking antifreeze bad and fast. Don't no wear it's coming from. What's the average cost to get it fix❓PLEASE don't say in the thousands 😥

[@DIYwithMichaelBorders]

Good morning & thanks for watching. Locating the exact point at which the coolant is leaking will help us give you a reliable price of repair. On average though, common repairs can cost between $250-$700. Keep us posted. 😎👍🔧🔩

[@A_Son_Of_Yahuah]

@@DIYwithMichaelBorders Thanks 👍🏽

[@DIYwithMichaelBorders]

@@A_Son_Of_Yahuah You’re welcome. 😎👍

[@timothyschneider882]

I have a question for you. My aunt has a 2013 Chevy Cruze 1.4l turbo and the hose that runs from the outlet valve to the radiator is leaking. I was wonder what would cause it to build so much pressure for it to start leaking. Would that mean the outlet valve is bad?

[@DIYwithMichaelBorders]

Timothy schneider We hope you enjoyed the video. As your engine warms up, the pressure inside your coolant system builds. This is normal & required for your coolant system to operate efficiently and properly. The problem you run into overtime is warped & hardened hoses. The more warped and hardened your hose becomes, the harder time the clamp has on making that water tight seal...thus leaks occur. Keep us posted on your project. Many more helpful videos to come. 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩

[@JacobBennington-yx1pg]

How's the car now