Replace GE reverse osmosis filters and membrane

[@DIYwithMichaelBorders]

If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases. amzn.to/3YVJUum amzn.to/46Xj48e amzn.to/4bOWCRm 😎👍 Reverse Osmosis system Playlist kzbin.info/www/bejne/o5vKXqF9rdV1g5o 1. How to Purge RO system kzbin.info/www/bejne/mXm2n5V9eph6bNk 2. How to re-pressurize RO storage tank kzbin.info/www/bejne/o5vKXqF9rdV1g5o

[@maninscrubdallas8694]

I didn’t see the other “steps” about removing all filters from GE; GE’s instructions: remove pre filter 1st, membrane filter 2nd, & post filter last, then replace new filters in reverse. Then purge system for 24 hours; replace the battery (supplied in pre/post filters packet). That’s it. I got mine in 2021; perhaps, GE has a newer version that requires the process you used in your video; however, I downloaded the instructions today from GE’s site and instructions were the same from 2021. I replaced all my filters today using GE’s instructions I mentioned above here.

[@DIYwithMichaelBorders]

Thanks for watching, the additional steps of sanitizing system with bleach is fully explained and performed in the video link below. kzbin.info/www/bejne/a6uxqHRuaMaIZsksi=T4Gbvbxyb7x63Mie We hope this helps. 👍

[@phoenixtropicalsvid]

I've had mine for 4 years and just replace the filters as per the instructions. Pre and post every 6 months and center every year. No issues. I don't even purge for 24 hours after changing the filters. I just run four 5 minutes to let the air out and then let the remaining air percolate out after that with the tap off. Why waste all that water and lose 24 hours of filtering. That seems like a month of water use maybe. I'm drinking the water, not doing surgery with it. I also discarded the battery. It's just annoying. Instead I write the dates of install on the cylinders. Simple.

[@DIYwithMichaelBorders]

Good morning ☕️ we really appreciate you watching and sharing your experience. We continue to enjoy this system, it has been great for us. GE tech mentions to purge 24 hours for a few reason’s including removing air, properly priming membrane, and removing any chemicals remaining in system as the new filters and membrane are introduced to system and begin operating. 😁👍🧰

[@LuminaPath]

What’s about the stage 4 & 5 remineralization/anti microbial filter?

[@Maria-xw6qe]

Is it absolutely necessary to purge the system after each replacement? How many gallons of water am I losing when I purge? Could that water be used to water plants or is it truly toxic? Thanks for your videos. You're the only person on the internet that makes this look easy

[@DIYwithMichaelBorders]

Thanks for watching, according to the manufacturer, it is. We have had that same question for sure, not as much water as you think since it’s a trickle. Kinda like letting your car warm up in freezing cold temperatures…you won’t get heat until the engine is warm. Same goes for the filter and membrane, if you don’t allow the system to purge (warm up), you won’t get to experience the quality of the system at its fullest and best. As far as using water for watering plants, we haven’t tried that…🤔…that will be personal preference.

[@teresacalouche9960]

Hi Michae,l thanks so much for this tutorial. I have searched online for the kenmore flow restrictor that you recommend but it's unavailable. Is there another model that you can suggest? I live in Canada. Thanks!

[@DIYwithMichaelBorders]

Thanks for watching, have you contacted Kenmore customer support direct? They may have the part available. Below is an option however before purchasing, we would double check your reverse osmosis water line sizes. amzn.to/46xYY4j If interested in purchasing this product, visit our Amazon affiliate link above. I earn from qualifying purchases.

[@wstt4]

How often should the system be purged and how often sanitized (bleached)? What does purge do, and if not purged after changing filters does that mean you’re drinking stuff you shouldn’t be drinking because it hasn’t been flushed out? I’ve even got an extra set of sealed filters.

[@DIYwithMichaelBorders]

Copy and pasted from your comment on our other video. Thanks for watching, great question. GE recommends system to be sanitized once a year during the time you’re replacing membrane. Purging will ensure all air has been pushed out of system which in return, will allow your filtration system to perform properly, efficiently, and as designed. 😎👍

[@angelatomaselle]

I have the older version of the GE profile RO, is this basically the same instructions for that version as well? Or is there a different video? I’ve had my system over 15 years and I’ve only changed the membrane once (I know, I had no idea how to bleach it out) but I do change the filters every six months.

[@DIYwithMichaelBorders]

Good morning ☕️ we like the older style GE units. We put together a few helpful DIY videos on the older unit. Below is a link to our (Fixing Reverse Osmosis System’s) Playlist. This Playlist contains a few helpful videos on the older style GE unit as well as the newer style unit. kzbin.info/aero/PLjCXOz8TSkZlQnBuZZrgOiwjkvAkXc_Ov&si=gJo0k8f38o2XBW1E Hope this helps. 🧰

[@BillHess-b1i]

Is there a reason Home Depot sells a filter kit with Stage 1 and Stage 2 only? Is it no necessary to change the membrane every time you change 1 and 2?

[@DIYwithMichaelBorders]

Thanks for watching, great question. They sell it in this manner because you only need to replace membrane once a year however they recommend replacing filters every 6 months. 😎👍🧰

[@willb.3787]

Ive had this filter for a few years and ive been happy with it until recently it stated gurgling a lot and spilling water out of the overflow hole in the faucet. Ive searched and looked for a solution but not sure what to do. Ive changed the filters as well but it just gets worse. Could it be that something is clogged in the system? Would appreciate your thoughts. Thanks

[@DIYwithMichaelBorders]

@@willb.3787 Thanks for watching, any update? It’s very possible that the Black drain line is clogged. We would open faucet and allow tank and system to fully drain. Once drained, we would disconnect the drain line and check its condition. If clogged, it will need to be cleared. Keep us posted.

[@julioambriz646]

Where did you buy the Flow restrictor

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualified purchases. amzn.to/3CATlEi The product in this link is the exact part # flow restrictor as shown in this video. 😎👍🔧🔩

[@rodrigodiaz809]

This is a Kenmore part. So you’re telling me it will work with ge RO system? It doesn’t say that it’s compatible on Amazon. Not too expensive tho

[@danyzuk0]

So these are the only 3 filters to replace? If it's a 5 filter system is there anything else to replace?

[@DIYwithMichaelBorders]

Good morning ☕️ are you servicing the exact same GE system as shown in this video? If so, replacing the 3 cartridges (Pre/Post filters, and Membrane) is all that needs to be replaced. Filters every 6 months, Membrane every year. 😁👍🧰

[@wstt4]

I changed the filters and I have no pressure and my water tastes funny still after several months. What should I do? Should I just give up and buy another system? Do you have an IG I can dm you on? Can I pay you to help me fix this or should I just get a different system? I even have an extra set of sealed replacement filters so I’d rather get this working.

[@DIYwithMichaelBorders]

Good morning ☕️ By chance did you replace the internal flow restrictor? This part has the tiniest little hole in it and if gunked up, can lead to your exact issue. You brought up purchasing a new system. Honestly, not a bad idea when comparing price of new systems against purchasing new filters, membrane, and flow restrictor. We talked to a viewer recently that did just that. He purchased the exact GE system and he mentioned he was very happy with his decision. He new exactly how to remove old system, install new system, and new everything on how the system works.

[@rubenandres1451]

Hi Michael, I did all the steps in the video but now the 1st cartridge pops out when inserting it. Tried it wiht out the membrane, orange little tube, to discard it but it happened again. Got any suggestions?

[@WallyCarmichael]

Your amazon link only shows two of the three filters. And I only need the filters. Where Can I find all three filters?

[@DIYwithMichaelBorders]

Thanks for watching. If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases. amzn.to/46Xj48e 👍

[@JesseRyan]

How much monry is the pre filter and post filter and sanitation set up ?

[@DIYwithMichaelBorders]

Thanks for watching, great question. We believe it’s roughly $120.00 for the full set. 😎👍

[@prod2one]

How do you know when the filters need to be replaced?

[@jamessu9913]

After I change the pre and post filter(Center RO filter not change because just 6 months), I drain the water for about 10 minutes. After that, I still find very tiny black particles in the water; Are the filters defect or something eles ?

[@DIYwithMichaelBorders]

@@jamessu9913 Thanks for watching, did you perform a 24-hour purging cycle? If not, we strongly encourage you to purge the system for 24 hours, which will help flush out any and all contaminants.

[@jamessu9913]

After 24 hours purge cycle, the water still has a lot of tiny black particles,; I order new set of filters and change them, after draining water about 5 minutes, those black particles disappear. The old set of filters are defect.

[@DIYwithMichaelBorders]

@@jamessu9913 Good morning, we really appreciate the update. Defective filters unfortunately happen, that’s awesome you didn’t give up. We experienced faulty filters a few years back, in our case they froze outside in the cold weather….sooo…maybe that was our fault…😜

[@drewmena8194]

Why did you remove the flow restrictor? You don’t need to do that when changing filters correct ?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. The instruction manual recommends replacing flow restrictor when replacing membrane. Let us know if you have any questions, hope all is well with you and your family. 😎👍

[@drewmena8194]

@@DIYwithMichaelBorders thanks so much Been stressed out trying to find out why my tank isn’t filling so was just curious

[@drewmena8194]

@@DIYwithMichaelBorders so the flow restrictor corrects the flow rate to produce high quality water and the check valve stop the RO from receiving too much pressure and the auto shutoff stops water from draining when tank is full ?

[@DIYwithMichaelBorders]

@@drewmena8194 So happy to help, us DIYers need to stick together!!! 😎👍

[@DIYwithMichaelBorders]

@@drewmena8194 😎👍

[@hungnguyen-wm8vm]

Hello ! Can I ask why I changed the filter and now it doesn't come out of the faucet? My machine is GNRQ18NBN. Please give me your opinion so I can do it

[@DIYwithMichaelBorders]

Thanks for watching, that’s no fun. By chance did the filters sit outside in very cold weather? Freezing temperatures can ruin filters and membrane which sets you up for a lose lose.

[@annahgibbus8]

I'll check your videos, but do you have one that tells how to set a Honeywell thermostat? I don't understand "leave for work" "come home" etc.? I want the dang heat to blast when I want it I'm home all day & night. So far Everytime it asks me wherever I just set each choice to 72. I'm used to apartment living with low & high on AC or heat. Call me a dufuss, but I don't get home, sleeping, at work? I want it 72 in the winter & 60 in the summer. Thanks! Sheesh LoL 🤦

[@annahgibbus8]

And BTW years ago I bought an under the sink really good filtration system on a major sale. In the comments everybody complained they couldn't install it properly. My past husband RIP was a mechanical engineer self taught genius. I took a chance & bought it & as soon as he opened the box he said: Well obviously this needs a triple attachment ( correct more terms IDK) thingy ( thingy my terms LoL 😆). Anyways he had a triple thingy LoL attachment & installed with ease. Thanks so much for your videos because I haven't a clue & when you put one up that I need I'm extremely grateful! Thanks!

[@DIYwithMichaelBorders]

Thanks for watching, unfortunately we do not have a Honeywell specific video. Below is a link to our video showing the programming steps of our Thermostat. kzbin.info/www/bejne/oYW4eqSId8d0Z8k Keep us posted on your project. 😎👍

[@DIYwithMichaelBorders]

@@annahgibbus8 You are very welcome, we are always here to help answer questions. 😎👍

[@annahgibbus8]

@@DIYwithMichaelBorders Thank you for the link I was finally able to do it. The Christmas tree was in the way so it took a while to be able to see the numbers. Thanks a lot! New problem 🤦 I have a flat top electric stove. There's a bottom drawer to keep things in. I was in a hurry & put the cookie sheets on top of the baking dishes. Now I can't open the drawer 🤦🥴🙄🤷 I went inside the oven took out the shelf's, but unfortunately the bottom of the oven is attached. I was hoping I could lift it up, smoosh down the cookie sheets & open the drawer. Any suggestions? What a stupid move I knew I'd have a problem, but was in a hurry. If I ever get it open I'll never do that again 🤦

[@DIYwithMichaelBorders]

@@annahgibbus8 Thanks for the reply & we have all done that, we promise...🤣 You can carefully insert a flathead screwdriver & gently press down on the cookie sheet that’s preventing drawer from opening. Keep us posted. 😎👍

[@jackschwind4194]

I am having difficulty in how or where to buy the replacement kit. Can you share the details of where I can purchase this? And kudos to your video. It was very informative!

[@DIYwithMichaelBorders]

Good morning ☕️ thanks for reaching out to us. Below is a link that may help. www.searspartsdirect.com/product/3y7nf2qbjt-0042-625/id-7301203 However you may have to purchase directly from GE support number found on back of owners manual.

[@karenmay4033]

Hi Michael, I know you posted this over a year ago but I hope you see this comment because I can't figure out how to email you. I have watched your videos on this subject. Would you have any recommendations if my cylinders are leaking once I replace new ones? Very frustrating.

[@calderonjd30]

This is the one I have. After changing the filters I’m supposed to let the water run for 24hrs??

[@DIYwithMichaelBorders]

Awesome, yup. 24 hour purging time frame with faucet open and water trickling out. 😎👍

[@calderonjd30]

@@DIYwithMichaelBorders ooops I already drank some water without letting it run 😬… I’ll let it run now..lol

[@calderonjd30]

@@DIYwithMichaelBorders also am I supposed to change all 3 filters every time?? Sorry to bug you… I’m a single mom and don’t know what I’m doing 🤣 thank you for your help

[@DIYwithMichaelBorders]

@@calderonjd30 😁👍

[@DIYwithMichaelBorders]

@@calderonjd30 No bother at all. 😎👍 GE recommends replacing filters every 6 months and membrane once a year. However the more people we talk to that have this unit end up replacing filters only once a year when they replace membrane. Most say it really isn’t ready for filter replacement after 6 months however that will be personal preference. 😁👍

[@danielglidden9290]

Where can we find just the flow restrictor?

[@DIYwithMichaelBorders]

Good morning ☕️ we can hopefully help. Below are a few links. First link is to our video showing the steps in replacing Flow Restrictor. kzbin.info/www/bejne/iHTblJukirZoptUsi=tXEd8PYc77NEhqg1 Second link below is to our exact replacement part which is p/n 7333153 and universal with Kenmore. amzn.to/4bOWCRm If interested in purchasing this product, visit our Amazon affiliate link above. I earn from qualifying purchases. 😁👍🧰

[@danielglidden9290]

@@DIYwithMichaelBorders thank you!

[@DIYwithMichaelBorders]

@@danielglidden9290 😁👍🧰

[@damasdealership7210]

ge reverse osmosis water filter drain line running out all time?

[@DIYwithMichaelBorders]

Thanks for watching, have filters and membrane been replaced recently? If so, was the tank pressurized when it was empty during filters and membrane change? Below is a link to our reverse osmosis water system playlist. This includes several videos that we hope you will find helpful. kzbin.info/aero/PLjCXOz8TSkZlQnBuZZrgOiwjkvAkXc_Ov&si=Mc2Ds69iKRrBu7Jb 👍🧰

[@jonathanvargasbueno]

Where can I get this replacement filters, what are the part numbers?

[@DIYwithMichaelBorders]

Thanks for watching, Home Depot has the replacement kit including Pre-filter, membrane, and Post-filter.

[@gst5620]

I changed the filters but after doing that the pressure is really low. Any suggestions why? Tia

[@DIYwithMichaelBorders]

Thanks for watching, after replacing filters, it takes on average 3-4 hours for the system to properly pressurize and provide proper flow of water.

[@gst5620]

@@DIYwithMichaelBorders yeah it’s more than 10 hrs now,it was okay before but after changing the filters now it’s very low. I was watching other videos too and a lot of people were saying that we should check the pressure of the tank too

[@DIYwithMichaelBorders]

@@gst5620 Thanks for the update, tank psi is important. To get the best & most accurate psi reading, tank must be empty when adding air. What psi does your manual say?

[@rollingstone3017]

@@DIYwithMichaelBorders I ran the spigot for 24 hours, and still barely a trickle once I let pressure build back up. I seem to be in the same boat with GST.

[@DIYwithMichaelBorders]

@@rollingstone3017 Hey what’s up, thanks for watching & sharing this. Let’s get this figured out. A few things can cause this including a clogged flow restrictor, a faulty auto-shutoff valve, and even faulty new filters...yes...that can happen, it happened to us. Below is a link to our RO system PlayList. It contains several troubleshooting videos that you may find helpful. kzbin.info/aero/PLjCXOz8TSkZlQnBuZZrgOiwjkvAkXc_Ov Please keep us posted, us DIYers need to stick together!!! 😎👍

[@goodfella024]

I just changed my filters of membranes and now it’s leaking. Any ideas of what I’m doing wrong? I’ve done this multiple times and it’s still leaking.

[@DIYwithMichaelBorders]

Thanks for watching, any update? Where exactly is it leaking from?

[@YaKkO331]

Let me get this straight…every 6 months I have to spend 24 hrs doing a purge too?

[@dannylemus1318]

That’s my question and no one’s answering:/

[@Originalxlander]

... So this is impossible since GE dropped all support parts

[@DIYwithMichaelBorders]

@@Originalxlander Thanks for watching, what parts are you looking to purchase? If it’s filters and membrane, check out link below. If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases. amzn.to/3YVJUum amzn.to/46Xj48e amzn.to/4bOWCRm 😎👍 Reverse Osmosis system Playlist kzbin.info/www/bejne/o5vKXqF9rdV1g5o 1. How to Purge RO system kzbin.info/www/bejne/mXm2n5V9eph6bNk 2. How to re-pressurize RO storage tank kzbin.info/www/bejne/o5vKXqF9rdV1g5o

[@Originalxlander]

@@DIYwithMichaelBorders the sterilizing kit

[@DIYwithMichaelBorders]

@@Originalxlander Thanks for the reply, the link below may be helpful. www.homedepot.com/p/Reverse-Osmosis-Sanitization-Kit-1073-22-AB/206453568 🧰

[@brucerowe9018]

Well done!

[@DIYwithMichaelBorders]

Thanks Bruce, many more helpful videos to come! 😎👍

[@johnvenegas5120]

Bro why can’t you just put everything into one video?

[@DIYwithMichaelBorders]

Good morning John, we appreciate your question. This video focuses on replacing filters and membrane only. Giving viewers the option to watch additional videos covering different items and procedures helps us give them the choice whether or not to continue. This ensures that we do not waste their valuable time. Our goal is to get you the info you need without wasting your valuable time. Reach out to us any time and hey if you’re into crypto trading, be an early participant in our newly launched DIY community ecosystem. Toolboxtoken.com We DIYers need to stick together! 🧰