DIY Troubleshooting - Washing machine wont turn on - (PART 3)

Today, lets remove the Control Panel from washing machine $ inspect all internal wiring & connection points!

[@quirkybeachbums7447]

Thank you!! This fixed my washer! And all it was the signal knob w a stuck in the pushed in position!! Never thought I'd be so happy to do laundry! 🤣

[@DIYwithMichaelBorders]

Thanks for watching, that’s great and we appreciate you sharing this. Let us know if you have any questions.

[@Itayplayz]

Thank you. The set of video's were most useful

[@DIYwithMichaelBorders]

Thanks for watching, we appreciate you sharing this. Let us know if you have any questions. Also hey if you’re into crypto trading, check out our newly launched DIY ecosystem. Toolboxtoken.com Reach out to us any time! 🧰

[@andrewgartman3379]

Michael: GREAT videos! Thank you! DIY aid the only way. I’m struggling to determine if my Samsung, 5.2 cubic ActiveWash (top feed), needs new user interface/display board or control board. Push the power button and 2-3seconds later it chimes but no lights and buttons don’t work… I’ve verified proper voltage up to & including the fuse on control board. Display board is much cheaper… thanks for any help you can offer!!

[@DIYwithMichaelBorders]

Thanks for watching & have you performed a full system reset? If not, below are two links to reset videos. kzbin.info/www/bejne/a3PIdWOJfa6na7M kzbin.info/www/bejne/pmq1qKOAbcmprZo Although the machines in these videos are Samsung, it is the same concept and procedure for yours. If this does not work, we would focus on replacing the display board first. Please keep us posted, us DIY’ers need to stick together!

[@ozzstars_cars]

Open the board and check for continuity on the fuse. Boom. If it's blown find out why.

[@DIYwithMichaelBorders]

Thanks for watching & sharing this. Any & all helpful info is much appreciated. 😎👍🔧🔩

[@synovium]

I happen to have the same model control panel that you are demonstrating. However, it seems that my on-off button is sticking or not making contact when it does; the machine is fully operational. DO you think a little electronic cleaner spray around the button will clear things up?

[@DIYwithMichaelBorders]

Thanks for watching & we haven’t used spray in the past...🤔...keep us posted on if it works. Another option is to remove your entire control panel and gain access to the inner parts from the opposite side. You can then clean anything that may be interfering with the operation of your button.

[@w8what575]

Here’s a thought…get rid of all the excessive bs they put in these things to make them run…it doesn’t need all the bells and whistles!

[@DIYwithMichaelBorders]

Thanks for watching and sharing your thoughts, always welcome here on our channel. 👍

[@deepakpaswan941]

Very nice

[@fionagraham678]

Thankyu sweetheart. I pressed each button fr 10 and off it went. Yo, yr good bro

[@DIYwithMichaelBorders]

Fiona Graham Awesome Awesome & that’s great to hear. Kinda sounds like you just entered the DIY club. 😀 Well done! Us fellow DIY’ers need to stick together. Many more helpful videos to come! Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@allanh2912]

In video 3 how did you determine a new board was needed or did u just guess ?

[@DIYwithMichaelBorders]

Allan H Thanks for watching & we appreciate you reaching out to us. The way the board was performing gave us a pretty idea that it was failing. We hope the video helped. Please subscribe to the channel and ring your KZbin bell 🔔 this will be very helpful to us thanks again. 😎👍🔧🔩

[@pl434]

Michael, I have an older washer, which I love, and it has the older push knob, where you push the knob in and pull it out to activate the water cycle to start. After moving the water to install new flooring, the water cycle sounds like it is jammed, lije when s garbage disposal jams. I did all steps in video 1 and 2. Any suggestions? The water was working perfectly before the move. Seems coincidence thst it would crap out just because if a move. Any advice?

[@pl434]

P.S. It is a top loading washer. (which I prefer!)

[@pamelaspencer9384]

Brian I replaced the door mechanism on my Samsung washer and it still will not work .It is making a buzzing noise when I start it up and will not start the cycle!? Can you help me??

[@lovmygabby]

So after watching all 3 videos, I can honestly say the 1st one worked. I unplugged it and plugged it back in. I didn't have to push any buttons, but what is making it do that? It never did before, and as of 3 days ago I now have to unplug it everytime? Do I need to take it apart because I really don't want to, but I want it to be fixed? I don't know anything about this stuff except that I can not afford it and I'm about to have a panic attack.

[@DIYwithMichaelBorders]

lovmygabby Thanks for watching. Have you had any recent power outages to your home? A power surge can lead to this. We recommend unplugging it and leaving it unplugged for 30 minutes. This will give the machine time to complete a full reset. After 30 minutes, plug machine back in and see how it performs over the next few cycles. Keep us posted. Us fellow DIY’ers need to stick together. We hope the video helped. Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@leechad1307]

@@DIYwithMichaelBorders how come my Samsung washer can't start. Can't.powered up. Fid

[@DIYwithMichaelBorders]

@@leechad1307 Thanks for watching, a full system reset may help. Below are two links to videos showing reset procedures. kzbin.info/www/bejne/pmq1qKOAbcmprZo kzbin.info/www/bejne/a3PIdWOJfa6na7M 😎👍🔧🔩

[@leechad1307]

Done that but still can't powered up.. getting Samsung services guy to come next Monday

[@DIYwithMichaelBorders]

@@leechad1307 Thanks for the update, please keep us posted on what the technician finds. 😎👍🔧🔩

[@cherylbarrett8121]

I need step by step guide to repairing a GE stackable washer that will not turn on light will not turn on but the dryer will we have no power to the washer part it won't it won't do nothing please

[@dianeelmlinger2459]

My ge portable will not fill nor do I hear the motor but the cycles light up on wash the start button or lid catch is not closing. Because the lights go on but not the start button is it worth repairing

[@DIYwithMichaelBorders]

Thanks for watching, any update? Have you performed a system reset to fully reconfigure your machine back to normal? Below is a helpful video guide. kzbin.info/www/bejne/hXrUnmaEiLuCqsUsi=-qiW51WnsySuqNAG 😁👍🧰

[@morganescamilla163]

my washing machin star but at middle of cycle turn off please some idea thanks

[@jamesmackie6641]

If I'm getting no power to the control panel how will I know if replacing the mains filter won't just be blown again

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. Replacing control panel may solve issue. A few things can cause your control panel to fail. 1. Old & worn out 2. Power outage 3. Power surge Above are the common causes. 👍

[@natalierogers1343]

I'm having a hard time finding your other 2 videos

[@coleadero39]

My washer it won't stop spining in the last minute of last cycle, any ideas out there?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. What’s your update? It’s very possible that you have a faulty control board that is not finishing the cycle. Please keep us posted. 😎👍🔧🔩

[@manjuv1646]

Hi Bro, I hear tick sound but no power on or light's on.! What may be issue?

[@DIYwithMichaelBorders]

Thanks for watching and let’s get this figured out. If you are hearing a clicking sound, try your best to locate the exact spot the clicking is coming from. This will usually be inside the panel or on your door. The door actually has a door lock switch/mechanism that activates when the cycle is started... in other words...locks the door so you cannot open it during the cycle. If this fails, a new door lock switch will hopefully get you back up and running. If you hear the door lock switch activating, then this will not be your issue and you need to focus on your control panel. Keep us posted. 😎👍🔧🔩

[@rayogamefarm3127]

Did you find the issue mine won’t turn on just a clicking very 10 seconds

[@rayogamefarm3127]

Did you find the issue mine won’t turn on just a clicking very 10 seconds

[@rayogamefarm3127]

Did you find the issue mine won’t turn on just a clicking very 10 seconds

[@netanelatu1900]

How can I have a Control board from you sir?

[@DIYwithMichaelBorders]

Netane Latu RepairClinic.com

[@AmosFunmilayo-qm3cq]

Montpellier washing machine is giving me problem is on but not working

[@DIYwithMichaelBorders]

Thanks for watching, have you performed a system reset? Keep us posted. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@davidlewis1058]

I replaced the front control board but it didn't make any difference. The washing machine still doesn't turn on. I tested the power receptacle and it has power. What's next? Someone suggested the electronic control board in the back of the machine. Thank you.

[@DIYwithMichaelBorders]

David Lewis Thanks for watching. Have you had any recent power outages? A power outage can cause increased electrical surges through the machine & cause damage? Keep us posted. Us fellow DIY’ers need to stick together! 😎👍🔧🔩

[@ryancook9641]

I just replaced mine but still no power. did you get yours fixed? my kenmore elite is only 2 years old

[@netanelatu1900]

Anyone who knows I need to buy a Control board same with the one on the video please.

[@DIYwithMichaelBorders]

Netane Latu Thanks for watching. We recommend visiting: RepairClinic.com Once at this site, enter in your model number and click search. Any and all replacement parts for your exact machine will be available for purchase. Hope this helps. 😎👍🔧🔩

[@rogertaylor8615]

I have an amana front loader with power

[@DIYwithMichaelBorders]

Thanks for watching, we’re you able to fix issue by resetting unit. Also hey if you’re into crypto trading, check out our newly launched DIY ecosystem. Toolboxtoken.com Reach out to us any time! 🧰

[@rogertaylor8615]

Not yet I haven't

[@rogertaylor8615]

@@DIYwithMichaelBorders not yet I haven't

[@DIYwithMichaelBorders]

@@rogertaylor8615 😎👍

[@DIYwithMichaelBorders]

@@rogertaylor8615 Did you perform reset? Your control board might be in its early stages of failure.

[@virdiejohnson9996]

[front end loader stuck on pause

[@melodyfleeman8721]

Please number your videos.

[@andrewgartman3379]

They are numbered… at the end if the descriptions in parentheses.