DJI Mavic 2 zoom/pro landing leg replacement - no soldering! Replace front leg , replace landing leg

[@eumatthe]

This was very helpful. I was able to order the replacement part online and as soon as I started taking off the broken part I thought for sure I was in deep doo doo. Like many casual hobbyists, I don't have a workshop for drone repairs so the idea of soldering and re-soldering had me stymied. Thankfully, I came across your video which provided a simple solution to an otherwise challenging problem. I just finished my repairs and fired up my drone and all systems are go! Thanks for your assistance!

[@johnredfearn6470]

Hi guys, sorry for the lack of communication. Firstly thanks for all the kind words. Secondly, the small plastic leg cannot, or at the time of making the video, could not be bought separately, I purchased the full arm, complete including new motor form Ali express for around £25 each. I then remove the part I needed, and boxed the rest just incase I need any spares.

[@gossumx]

Thank you. As of this comment, it seems that the leg piece is still not available solo. That's a bummer.

[@DebOxy]

Thanks John, first small mishap, fixed exactly to your direction, brilliant

[@deltamediatv8801]

Found this video after repairing my m2p front right leg. During the fix I damaged the esc board soldering : - ( replaced and fixed esc only to encountered a faulty imu. Week later repaired the all errors and now I'm back in the air. I Soo wish I found this video before I spent £120 on parts and many hours labour. Well done mate good video. No doubt I'll be using it for reference in the future ha ha.

[@keedas9679]

Thanks for the video! saved me a lot of time, and money ;)

[@mikolajmikolaj763]

Give this man a beer! ;)

[@tyler947]

Thanks so much for this. Just did this repair, worked brilliantly. I didn’t have a scalpel tool so I used a tiny Dremel tool bit to grind the hole out a bit larger.

[@njrivetelite]

You can buy the landing gear piece itself.. It only costs $8 on Amazon.. no soldering. I had to dremel the leg a bit to fit the led out. I couldn't get the led through the hole attached to the wires and didn't want to separate it from it's wires. I used a small drill bit to make a hole to fit the led through. It doesn't damage the structural integrity of the piece and when done it looks like new. Fitting the led through the new piece with my big fingers required patience but a lil persistence and it'll go in nicely and sit in place especially after you replace the plastic led cover. I just fixed my Mavic 2 Pro last night. Your scalpel idea is probably quicker & better than the dremel. But as long as we both got the job done.. it's all Gravy Baby!

[@MAIKUS07]

Well , I tried doing this because I have the same issue, but I ended up breaking one of the cables coming from the small led, I’m gonna have to try to soldier it now 🥲🥲🥲 any tips or videos?

[@aurelienlebourhis5170]

Thank you very much for your explanations 🙏

[@thetruebrit85]

Nice one Lad! Thanks for sharing. You've saved me a load of bother...Full respect.👍

[@kocoelbaur3415]

Hey mate where i can get the landing leg like that because i need one for my drone i'm from bali

[@eumatthe]

I got mine on eBay for $12.34 (US). 99.5% positive feedback - fast shipping, good quality, fit well!

[@genosiaproduction7091]

Amazon $10.99 idk if you figured it out already since 9 moths has passed lol

[@Dynexty]

Thanks, i was doing alot of searching because i broke my leg aswell, hearing about soldering and all that was making this whole project sound like im going to have to spend an arm and a leg to have dji replace it. Cant believe no one thought to just make the hole a little bigger . Thanks you saved me some headache.

[@johnredfearn6470]

Dynexty if it helps just one person then it was worth making 🙌🏻

[@Dynexty]

@@johnredfearn6470 i might be the first but trust me i wont be the last. these legs are unbelievably easy to break, and most people dont want to mess it up worse by soldering.

[@Dynexty]

@@johnredfearn6470 is this a secondary channel of yours? i dont see any mavic footage. would like to see what you capture.

[@vinylimageprofessionalvehi3393]

Dynexty yes I have a business page - Vinyl Image professional vehicle wrapping . I’ve literally only just started using it, and didn’t realise it was in sport mode and screamed it into a tree 😂 but there is a new small video of a recent wrap I just completed, the indoors footage it shot on the DJI osmo pocket and the outdoor footage it on the Mavic 2, it’s all abit new to me so I’m sure my shots will get better

[@ExitThisWayTv]

@@Dynexty nope not the last... I'm here with the same issue

[@madieyesall3044]

Hi, My motor have a sand. How disassembled it. My problem is the magnetic cup

[@SirDanMartin]

thanks for this. Worked a charm. Though i might recommend if you have a small selection of drill bits then just spinning them by hand to create the opening will be more simple.

[@dronesrus2183]

Where do i get those ends not the arms please

[@dronesrus2183]

But where do we find them?

[@toddmowen]

Nice, do you have a link to purchase just the foot you replaced for your M2P? I can only find the whole arm with the motor.

[@johnredfearn6470]

Todd Mowen hi, unfortunately, at the time, the kegs were not available, I had to buy the whole arm, around £25 from Ali express

[@toddmowen]

@@johnredfearn6470 sounds good, thanks!

[@PravinAswalePhotog]

just purchased Mavic 2 pro, within few days i am getting "Gimbal motor overloaded error" and then Gimbal starts moving erratically, no stability at all, many jerks are there. what is the solution for the same.

[@SamsonAsiedu]

Hi John, just watching your video. How can I contact you personally?

[@ZxSkyLineKidxZ]

Can't find the drone replacement leg for the Mavic Pro 2

[@romanevillyvisuals5258]

Thanks for your help !

[@giorgiofireblade]

Hello guy's, anybody have a site or a link where i can buy landing legs for mavic 2 zoom? Where ever i searched it was for mavic pro 1,i don't think it fits from pro to zoom,please help 😊

[@johnredfearn6470]

Hi guys, please read both the description below the video and my responses on the comments section, at the time of making the video, I could not buy the small legs seperate to the main arm, so I purchased two new arms and swapped them as in the video. These were sourced via Ali express.

[@restfulmelody9893]

Is the antenna included in the new arm that you purchased?

[@davebutler3905]

Nice one! Thanks!

[@walej2419]

Just crashed into a tree. And this video sure will reduce the headache of replacing my bent front arm. Thanks for this

[@vinylimageprofessionalvehi3393]

Wale J my pleasure! 👍🏻👍🏻

[@anhonestreviewer7015]

VINYL IMAGE Professional vehicle wrapping Hi John, where can I find just the leg, not the arm, for sale? I need a front right leg. Cheers.

[@swilliamson9031]

Where did you order the replacement leg from, been looking all over the net and haven't been able to any for the mavic 2 pro

[@JunaVisual]

me too

[@Lukas-pj5ls]

Ali Express

[@souviksamanta8938]

how to removed the legs, plz make a video for the same

[@michaelnelson9324]

Where can you buy tools for the mavic 2 pro?

[@jimwilson5307]

Where do you get the parts? I haven't checked yet but can you get them from dji?

[@roosterscreations]

You can get them on eBay 👍

[@slbgeo]

...."I haven't checked yet but..." Good God....you could have easily found the parts yourself in a shorter amount of time than it took you to post this disturbing declaration of your own incompetence. If you can find this video, then why can't you do a friggin' Google search, or go to the DJI...or eBay...or Amazon websites and DO YOUR OWN SEARCH for the parts?!? They are nearly EVERYWHERE. Do you have to call your mommy for instructions on how and where to buy groceries when you run out? If you need specific instructions on how to shop online, then try THIS incredibly complicated search term: "Mavic 2 Pro replacement legs" So much for the notion that "There's no such thing as a stupid question"! JEEZ. And by the looks of it, you're not the only lazy moron out there that needs specific instructions about how to do your own shopping. Just out of curiosity...do you find shopping (in general) to be a mentally challenging task?

[@adamberehulka2322]

I'm in a similar situation. I crashed my drone earlier and the leg bent where one of the 3 screws mount and stripped the hole. I haven't been able to find a detailed method of replacing the whole arm.

[@vinylimageprofessionalvehi3393]

Adam Berehulka I believe the whole arm is very similar to the mavic 1, it seems to be the end of the leg that is different

[@RonniePatiyal]

hey what's the name of that antenna chip

[@palimad]

Thanks works like a charm :)

[@andyboy2431]

Wish I’d seen this video a month ago! I did a replacement but cut and soldiered my wires... good hack you have there!

[@vinylimageprofessionalvehi3393]

André M Naidoo ahhh sorry you saw it a little too late, it’s deffo a better way if your not confident soldering

Thank you Sir.

[@vinylimageprofessionalvehi3393]

Görkem Hacıoğlu if there’s anything you need to know, please ask, it’s a pretty simple task, I’m not a pro video maker so if I’ve made it difficult to follow I apologise.

Thanks to your video I did it easily. I realized that there is nothing to worry about unseen parts.

[@hasanabouali]

Many comments with same question not Answered,.... Where you got only the legs without the complete arm...no links attached to the seller.. If anyone has a link please post it...

[@johnredfearn6470]

hasan mustafa i had to buy the arm complete just for the legs, they were around £25 each from AliExpress

[@davidlong9404]

Thank you so much

[@very_good_89]

В интересных моментах автор закрывает обзор камеры и ничего не видно((( например как вытащить антенну?

[@very_good_89]

Короче так!!! Просто пинцетом тяните (без дерганий) из ноги mavic 2 zoom/pro антенну и все получится. Главное не бойтесь

[@IngeJohnssonPhotography]

Great tip!

[@tshobe7833]

Thank you for the video! But such a horrible design by DJI!

[@АлександрГорбанев-е7с]

Спасибо мужик!

[@jagathkegallage7552]

Dji magic 2 zoom BRUSSELS MOTOR KV--> 1400 Battery 0% fly time 2 minutes only 🙏🙏🙏🙏🙏🌷 🇱🇰 ශ්‍රි ලංකා.....

[@n5xqj]

hand in way

[@gethighhobbies]

Thanks for your advice, 100%