DJI Mavic Pro 2 repair. Quick video showing Replacing front landing gear and motor arm of crash damaged Mavic 2 Pro from DJI. Original replacement parts used.
Пікірлер: 40
@tibetlama4 жыл бұрын
This is the best instruction movie for replacing an arm on your DJI Mavic Pro 2. Simple, short and to the point. Very well done. It worked for me.
@goneawayvideo4 жыл бұрын
Thank you so much for the super nice feedback! Hope it saved you time and money :)
@alitatunertc1775 Жыл бұрын
Thank you for the video! Helps a lot in the replacement of the left arm.
@Ulove6192 ай бұрын
Exceptional video. Though the exact size of that Allen wrench woulda been neat to know. Otherwise great video no bs
@WalkingCoyoteBear2 жыл бұрын
Great video, Thank you!
@EnhanX3 ай бұрын
Hi! Thanks for the video. I would be grateful if you could tell me: maybe you remember having a "GPS error" in the DJI application since the front leg was broken? Because mine Mavic has severe damage and I'm wondering whether I also need to order new GPS module or broken leg could be the reason for the GPS error as well.
@JeremyPoulain354 жыл бұрын
Amazing video !
@RPMadeIt Жыл бұрын
Any recommendation for temp setting on the soldering iron? This video is still relevant 3 years after you posted it! Just don't want to overheat the soldering points. Thanks in advance
@goneawayvideo Жыл бұрын
I’d start at medium setting and work my way up and ”tap testing” to see what gets the solder fluid enough. The circut board and soldering points seemed pretty hardy, but i would recomment a relativly small fine soldering tip to avoid unnecessary heating outside the designated area. Start low and slow and you’ll do fine.
@vyaktii29942 жыл бұрын
😘😘😘😘👍 this is very helpful for me thank you
@goneawayvideo2 жыл бұрын
Glad to hear, have safe flights!
@duramaxdemon13 жыл бұрын
Nice work
@goneawayvideo3 жыл бұрын
Thanks for the nice comment!
@v.sangha3 жыл бұрын
Thank you for the video, I'm about to order parts for my mavic pro 2. Would you recommend any places to get the parts from.
@goneawayvideo3 жыл бұрын
I sourced the part from a local supplier. I’m afraid I can’t recommend any international retailers as I’ve not used any. I would suggest using only original parts. Good luck on your repairs!
@eduardongc3 жыл бұрын
Hello, excellent video, can you confirm where exactly the compass is located? Thanks
@goneawayvideo2 жыл бұрын
Sorry I have no info on the compass, I would guess it goes by GPS and traveldirection rather than an actual compass.
@davidferrick3 жыл бұрын
WOW, all that for an arm replacement?
@goneawayvideo3 жыл бұрын
Yep, if anything it’s a promo video for DJIs insurance 😂 But it’s not really that bad with normal skills and common sense, I bought the part and figured it out as I went along. Hope it helps. Have a good one!
@waradenilifestyle95743 жыл бұрын
Hi! It's possible to use the mavic to rec something with a broken arm like this? or the dji go app refuse to record?
@goneawayvideo3 жыл бұрын
Hey, thanks for commenting. I don’t really know, never tried it. Obviously it gave a load of error messages as it could not complete self-diagnostics on boot up. But I imagine recording would be possible as it is not directly tied to flight controls.
@JunaVisual4 жыл бұрын
Nice video
@goneawayvideo4 жыл бұрын
Thank you, first video for me. Tried to keep it short and easy to follow.
@JunaVisual4 жыл бұрын
Mr.E please make more tutorial, your video is good, but please add the guide text, so it will be more easy to understand ❤
@vallerographics4 жыл бұрын
How much to fix one for me ?
@goneawayvideo4 жыл бұрын
I’m sorry mate, I don’t do this professionally. Thanks for the comment and confidence though :)
@christophersoto89053 жыл бұрын
does it matter where each yellow and white wire goes?
@goneawayvideo3 жыл бұрын
Hey there! Thanks for commenting and your question. The yellow and white are pretty much and extra outer insulation jacket, and the ”real” coloured insulated cable are inside those. I hope you understand what I mean. Anyways, each soldering point has tiny marking for what respective colour goes where, just keep tabs on where the thinner cables go and where the thicker ones go. Take everything slow and methodical and you’ll be fine. Best of luck!
@tonio82982 жыл бұрын
@@goneawayvideo Thanks so much for the info! I see what you mean about the thinner cables inside the yellow. It makes it so easy to find the right connection.
@goneawayvideo2 жыл бұрын
@@tonio8298 Good to hear! Good luck on the repairs :)
@tonio82982 жыл бұрын
@@goneawayvideo Thanks! The replacement arm and axle are arriving today. I'm confident that I can do that. Now I just have to figure out a video transmission issue.
@tonio82982 жыл бұрын
I'm repairing my crashed M2P
@reedrobb4 жыл бұрын
This is a TERRIBLE video but, thanks for posting it. Why so negative? There are a couple critical points in the video where you show little to no detail. I was cautious but made my way through it. These were, the removal of the cover. I was very cautious about breaking tabs and did it successfully. Working from the front as shown was helpful, but tough to see where the tabs contacted. This was critical, it would be so easy to break the top cover during removal. The other tough spot was the removal of the metal tension pin that holds the arm to the frame. This was tough to figure out. Where do you push or pull? You didn't help me here. I had to figure this out too. It's tough to pull up and using a set of needle nose plyers helped. But, it doesn't just lift up. It has side tension against it. Watch the reinstall video first, before you attempt the removal. This will give you an idea of how it comes out. A little dialog and less music and hands covering critical points would help. But, overall, thank for posting. This was pretty easy to do but if you've never been inside, it's a bit daunting on a $1500 drone that has less than 2 minutes of flight time. Yes, I should have been more aware of the settings before flying it indoors. I thought I had done my research. Thanks!
@goneawayvideo4 жыл бұрын
Hey reedrobb, thanks for the comment. It’s not meant to be a technical instruction video, it’s the first video I’ve done, first drone I’ve ever owned, crasched and repaired. One camera, one drone and one brand new soldering iron is all I had. I was thinking of re-doing the video and adding text to the steps, but then again, I’m no expert and it’s not a technical instruction video. Hope it’s helps someone. Again, thanks for the comment. Have a good one mate!
@goneawayvideo3 жыл бұрын
@1 FD 2 Hey there, thanks for commenting. Feel free to wreck your own drone and making a subsequent cinematic masterpiece depicting the repair. Have an awsome day!