DJI Mini 2 Ribbon Cable Replacement Guide: The Ultimate Step-by-Step Tutorial

[@divinerobinson1726]

I usually don't comment on much but I gotta for this. (DJI Mini 4k) Crashed into a tree and luckily it tumbled to the ground for me to collect. Tore the ribbon cable. Followed this vid step by step and my drones up and running again!!! 10/10 video

[@samkirwan3902]

You saved my drone! And saved me from either buying another one, or spending who knows how much getting it repaired - thank you!!

[@richardwharton8235]

Thanks for the tutorial!! You helped me bring my mini 2 back to life after crashing it. After I replaced the ribbon cable I started the drone up, it had multiple error codes, I restarted the remote and drone, when switched both back on it worked exactly how it should. Thanks for the help again!!!

[@stevemazza]

Thanks for helping me save my drone!!! A crash into some trees resulted in a partially ripped ribbon cable and your video helps greatly in getting back up in the air.

[@lefordz8075]

Got it done but had a heck of a time plugging the tiny ribbon cables back in, thought for sure I was going to mess one up. Happy to report it worked out great and the mini 2 lives to fly another day.

[@sergeynovikov91]

Brawo! Best Video Repair Gimbal DJI Mini 2. No empty talk, no water. You excellent technician. Thank You.

[@ricardasulozas]

Great, it worked as charm. Thanks to you I overcame disassembling anxiety!

[@iRepairAutos]

Thanks for posting this video. Because of you I was able to repair my drone!

[@andmotion5399]

Well, hallalo ja :) - after about 3hrs (ribbon connection wires slightly bent on arrival!!!, tried and tried, ended bending them badly trying to get to locate, then pulled them all back again comparing with the original cable- it worked -50mins!!!) - My drone works, no errors IMU/GPS... - It works - Thank you for such a clear video, likewise saved my a good bit of money.

[@palolargo8731]

excellent ill be able to fix my drone, you are the best

[@idegas39]

New cable from Aliexpress for 5 euro and some time and effort. Works great!

[@S.Overkamp]

My cable was broken after a crash. Watched this video and bought me a new cable on aliexpress. 2 weeks later it arrived and installed the cable with this video on the pc. Took some time, but the drone works again! I installed it on a mini 1.

[@tracyj318]

Im in the middle of doing this step by step as you are in the video. So far so good .will update u on my end result. Waitin for ribbon now.

[@orezculapte7207]

How it went?

[@rihardsbimanis8390]

Did you do it? Does you drone work now?

[@YoMichaelRay]

This video saved me big time! Definitely earned a new subscriber out of me.

[@stevrgrs]

Bro you put back in a pre bent cable. Show people the CORRECT way to bend their newly FLAT cable. That’s the only real difficult part of this repair :P

[@devander6347]

Thank you for this video without you i would have spend so much more time and money, i purchased the cable and followed you step by step and now the drone is 100s again!! thanks

[@henrydavis2660]

Thank you so much! This video was simple and concise, yet detailed enough to get the job done. Saved my drone!

[@leonardopereira_94]

Congratulations , you help me Very much 🤝🤝🤝🤝🤝👍

[@FrancescoCominetti]

I would like to add 2 info, connectors glue could be very hard, I used a soldering iron at 210° C Mini 1, SE and 2 ribbon cables are the same

[@whatspopping7992]

Thanks alot you save me hundreds of dollars

[@Ismacuch]

Thanks my friend, you saved me!

[@mecdepaname7575]

thanks a lot guy, i fixed it with your video ! After a big crash at Zakynthos Navagio beach, it fly again ! Thanks from Paris !

[@Wcclark75]

just a thank you for the algorythm.. A huge help thanks for the guide

[@BlazingGex]

oh yes, big success! thanks!

[@71k31]

Hat geholfen. Vielen Dank!

[@gortech3898]

What a fantastic instructional video without speaking. You have talent, many I bet. Thx for sharing!

[@5Mhz]

Thanks Bro your a Legend!! My done now works perfectly

[@lleonardow_]

Thank you so much, bro! Saved my drone! ♥

[@stevecorrao7170]

Thank you!

[@tornagawn]

No biggie but 2 gimbal mounts and the front left sensor, ?compass….were dislodged in a crash. Perfect vid to show fixing it.

[@HidalgoTigrao]

Thank you so much!!!

[@manuelrodriguez1338]

Increíble, funcionó a la perfección.

[@bangaji7711]

Thx you so much 🙏

[@JCAquino2012]

Amazing, tanks a lot for this vídeo from Brazil.

[@ArgonautasDrone]

Ótimo drone, sofreu quedas, consertei e continua voando perfeitamente. Meus vídeos continuam muito bom.

[@robyhandoyo3384]

thank you

[@antoniomarquez664]

Foi o melhor video de como trocar o flat ou desmontar o DJI mini 2 agradeço de coração esta de parabens 👍👍👍👋👋👋

[@Andrius-Lithuania]

My recommendation: gimbal assembly do AFTER every cable is attached to motherboard and MB in place. Cause I had difficulty to attach cable after I glued it before MB installation as on this video instruction.

[@new.videos]

Fantastic video.. one question, what kind of glue are you using for the connectors. Can the glue used to glue the display on the mobile phone?

[@DennisMoreira]

Muito bem explicado. show!!

[@Felipesilva-eu4rk]

ótimo tutorial

[@MrLemurman]

As per instructions here, I ordered the #1 Phillips screwdriver. Once I got the screwdriver I tried it in the screws and it does not fit. Won't even go into some of the holes in the body. Will not fit in the prop screws.

[@arunp1449]

Thanks for the video, In my case after replacing the ribbon cable the Mavic mini is not powering on. Only the 4 leds shows up and turn off :(

[@jeangomes8161]

Parabéns gostei muito tirou minha duvidas

[@jaybhandari13]

Navigation system error what is solution

[@GunOfYear]

can you upload a video on how to replace the front led of mini 2

[@thecan80an33]

Slight crash and it ripped this cable. Before I replaced it (thanks for the instructions) it would work but gave me the "Incompatible Gimbal Data" error and I couldn't fly. After repairing it just as you show here, I still have the same problem. Replacing that cable didn't help. Any idea on how to repair Incompatible Gimbal Data?

[@Yehoshua.Matityahu]

came to see what i can’t see & found out… my bottom mount tore out so essentially i need a new chassis 😀

[@joller79]

Does the ribbon cable also suply power to the camera feed? My mini 2 has no videofeed and no gimbal function, after crash

[@Randalgoncalves]

It will works as the same for Dji mavic mini first edition?

[@businessmotivation4542]

How will flex cable attached into drone. How it will be connected to a drone

[@DrMarvinLara]

Is this Professor Frink from the Simpsons?

[@TrippyGang2000]

Is it the same for mini 2 SE??

[@Rocnfire]

I did this repair and it fixed the original problem but now it says navigation system isn’t working error code 30105 anyone know how to fix it?

[@MehdiOthman]

can it be replaced by the ribbon cable of mavic mini 1 ?

[@kirstybailey3977]

Hey, please help. I've followed this tutorial. When I turned back on a solid red light now the drone won't attempt to turn on? I've checked all points are correctly pushed in and are in the correct positions. 🤷

[@KusagiTsuki]

look at error codes in app not at "red light"

[@miguelmitre6207]

Does this tutorial apply to Mavic mini as well?

[@eddiedevine834]

Hi is there any chance you would replace the ribbon in my mini 2 drone the drone works the camera just doesn’t go up and down and I can see the ribbon is broke and the places I can find to do the work want what I paid for the drone is this something I could get you to do please

[@WaltusAurelius]

My drone will not turn on now that I have it all back together. Any ideas where I went wrong?

[@andrewswimingpool]

Same

[@ThiagoSilva-ie4gs]

Awesome. My cable just arrived and I'll try to change it as soon as I get a glue gun

[@sousarogers]

Hello do you need to connect to the PC

[@sousarogers]

After installing the new Flex cable,

[@ThiagoSilva-ie4gs]

@@sousarogers no

[@thatswhatsup5456]

How’d it go for you

[@ThiagoSilva-ie4gs]

@@thatswhatsup5456 I took like one week to do this because it was more complicated than I thought but it's working like a charm so far.

[@JOSHUA-xg7cs]

pls do tutorial video of gimbal calibration using python apps

[@Jared-jv8fy]

What made you replace this cable

[@greattouchrepairs2574]

Pls Gimbal flex of min1 and min2 are they desam

[@john4491]

My mini pro 3 wing broke can you plzzzz do a video on that

[@fireball2275]

I think you have more issues than it being Broken if it has wings

[@christopherderksen5524]

I changed the ribbon and now have 1000 different error messages 😂 must’ve done something wrong

[@angelmanuelcamacho8690]

But, yes yes yes, there's a big But, if you buy a new cable or gimbal, motor ect, then you need to calibrate the gimbal through your computer, an app that's called Python and it's a hassle to do it.

[@FlightPattern177]

Just did this and there was no calibration required. Was basically plug and play.

[@ScottMitchellMedia]

9:4o - I see what you did there ;p

[@Jared-jv8fy]

I’m having a problem where it says gimbal stuck. I tried about everything, it worked for a minute and then it jammed again recently. My only & last idea is to fix the issue with replacing this cable. If anyone else has this issue and has solved it let me know

[@AFishInC4603]

just to make sure, you aren't flying with the cover on are you?

[@drinrem]

What if the camera said it need to be calibrated my drone fell. The camera is not working. I already replace the broken cable.

[@ilhamsalam5517]

Hey did you solve the problem.. I’m having the same issue please share if there is any info thank you

[@drinrem]

no. It needs to be calibrated by technician. i cant find any software to calibrate it. i buy a new drone. hahaha. 😭😭😭