DJI Phantom 4 | Best Camera Settings

[@FCPWHAT]

Hello Tom, want to add (correct) a couple of points in your video. Speaking as a long time working filmmaker it is not a good idea to leave the camera in Auto White Balance. The user should either set it to the appropriate lighting condition (sunny, cloudy etc) or set a manual white balance, this prevents headaches later in post in colour correction. Unless you're shooting entirely the Phantom, filmmakers will usually use more than one camera (which will be set to 1 region mostly). Leaving the camera in NTSC does NOT help PAL timelines.. As you will mix frame rates. Though this can be done (e.g in FCPX) it does alter playback speed of the video.... This is not good practice unless it's deliberate.

[@TomsTechTime]

+FCPWHAT As mentioned before: I always use the AWB with the Phantom series and never had any problems. And don't tell me I'm not experienced enough. Next to that I'm using several Canon DSLRs, a Panasonic MFT camera and a Blackmagic Production Camera. Even though I'm in a PAL country, I have them all set to NTSC with 29.976fps. I film everything with either 24fps (cinelike productions) or 30fps (everything else). At the ground, when filming in NTSC, I use safe shutter speeds and know my gear very well and know how to avoid flickering. I do not present any official rules, I talk about my personal favorite settings. And yes, they work. And no, most users like to capture aerials only, while only some combine them with normal camera shots.

[@DirkGently1972]

Totally agree, DO NOT use NTSC 30fps in European regions if you intend to share your content on commercial TVs over HDMI. For Europe/Australia and much of South East Asia stick with either PAL 24fps or 25fps. The 24fps frame rate is what you would expect in a typical movie theatre, whereas the 25fps is what you would actually get on your broadcast television channel (I.e. 25fps Progressive of 50Hz Interlaced). In PAL regions, simply stick with 24/25 fps :)

[@gunnar5266]

If you use auto balance you don't know anything about video... it makes no sense if you shoot in Log and then use AW... realy, you are telling a lot of things that are wrong...

[@esgee3829]

Try panning to/from the sun with Auto WB and see what happens. Also, try capturing fireworks at night with auto WB. You'll have wasted your time if cinematography is important to you as you'll have images where color temp and tint will be changing throughout your clip. So, if and only if lighting is relatively constant throughout your clip should you consider Auto WB if cinematography is important to you.

[@naturalist3d]

What is mode 4:2:0 or 4:0:0 for UHD and FullHD? What is 8-bit or 10-bit color?

[@UrbexWonderland]

As a cinematographer looking to buy a Phantom 4, the first thing that hit me is why you would suggest to set the camera to NTSC and 30fps. That is very misleading as not everyone will want to shoot at that frame rate and it will be dependent on the project and possibly inter-cutting other camera footage with the Phantom footage. For instance I have shot some material on my Sony XDCAM in 25fps, I would also shoot the Phantom material in 25fps. Also shooting in NTSC mode in a European country may mean you may get a flickering / strobing effect on street lamps, traffic lights etc. This is due to the frequency of the oscillations of alternating current (AC) in an electric power grid. its 50hz for Europe and 60hz for the US and some other regions. You should amend your description to take these factors into account. Color setting will depend on how much post production work the footage will go through. D-LOG is great for those looking to bring their own look to the footage in the way of color grading. For a finished look which needs no post production, you would choose one of the other modes.

[@florianz3]

if you know everything about this stuff: Can you make a video about it? I did read thousand different things about fps and all that stuff..

[@al35mm]

+Arkitekture Yes I agree with you there. 24FPS is more cinematic too. TBH I don't think Tom really knows a great deal what he is talking about here. His advice about leaving WB on auto was a big negative for me - set WB to the conditions and then it is fixed. There's nothing worse than watching footage taken on a camera set to auto, hunting about and switching setting half way through a shot. Even worse trying to edit such footage. Set it and stick with it. If the light changes while filming, fix it in post. In fact, post is everything now days - use the camera to catch the light, then do the film work in post, and providing you got things pretty spot on while shooting, you should be able to make everything good in the final - but not if it was set to auto, and was constantly changing!

[@TomsTechTime]

Please purchase your future DJI gear via my link to support my work for free (I get a small commission)! DJI Phantom 4: goo.gl/JPGVo8 DJI Phantom 3: goo.gl/dMcCSM All other DJI products: goo.gl/EkF2Sa Thanks all together, stay tuned and fly safe!

[@nicedronevideos3035]

Nice

[@theminernews1]

X

[@tonydronevideo6111]

Hi Tom. I downloaded a movie in 4 k from phantom 4 in to my iPad mini 4 and when I click play does not work. What I am doing wrong?Please help. Tony

[@kylem7365]

Tony Drone video, iPad doesn't support 4K video. Hardly anything does

[@davidzor]

Tom, your videos are the best Phantom info-series I've found on KZbin yet. Thanks for the informative content you provide. The only other thing I would mention is the DJI PNG clean up tool that DJI released. It really helps reduce the noise from the Sony sensor.

[@TalkingboxDMG]

OH... MY.... GOD! I can't believe how much time you just saved me with your P4 videos. Making a donation right now. You are awesome. THANK YOU SO MUCH.

[@pickitup1]

Being a KZbin video creator I can appreciate how much work you put in to making these helpful videos and I'm sure it hurts when the professional film makers make comments about your mistakes people need to keep in mind that these videos are not for the professionals but for people learning basics that being said if I may criticize you on something the leave donation part of your videos are a big negative. Keep up the good work

[@JonesHess]

I personally love the zebra stripes. Yes, the histogram shows you if you are over exposed but it does not show you what part of the image is blown out like the zebra stripes does. Sometimes its okay to overexpose something that you don't need detail in, like the sun. And exposing for zebras is like exposing to the right of the histogram which we know gives us more detail in the shadows.

[@TomsTechTime]

+Jonas Hesselmark Use whatever you like better. If the zebra works best for you: use it. I'm using the Histogram. Others might not like both of them. It depends on your personal preferences. Stay tuned and thanks for the feedback!

[@paalfalang443]

Hi Jonas! I fully agree with you regarding the use of zebra stripes. I wrote a post on Phantom pilots yesterday March 15, 2017. After a day has not commented on this post. I see that both zebra stripes and historgram discussed some general. Now I have sent a mail to DJI headquarter, so maybe one day there is an improvement. Are you from Sweden? Regards Paal fromNorway Link to these post: www.phantompilots.com/threads/a-big-wish-to-dji-about-the-zebra-stripes-and-adjusting-of-threshold-of-these.109675/

[@JonesHess]

Hi Paal! I agree with your suggestions in your post on Phantompilots.com. I don't know if DJI will add more professional features, like you mention, on the Phantom line but it would be very nice to see. I'm from Denmark btw. :)

[@loganboyd]

Auto White Balance can cause the color temperature to change through the video recording. For example, if viewing a sunny area and then rotating to view a cloudy or shaded area. Setting the White Balance to a fixed setting such as Sunny or Custom will guarantee that the WB does not drift or change throughout a recording.

[@Benidron]

+Logan Boyd it is the other way around, if you set white balance to Sunny, if you rotate to shadows, everything will look blueish, and no solution for that at all. Leaving it automatically, It will change increasing the kelvin degress, filming your footage much closer to real scene.

[@JEFFREYSOLORIO]

True

[@MatthewAdams]

Yes, but the change will always happen in the part of the shot you want to use ... same as auto-exposure.

[@woodzy1475]

Brilliant video NTSC tip excellent I have now got 3840x2160 at 30fps never knew this cant wait to try in the morning Thanks!!!

[@Colin399]

.Hey Tom, think you're tutorials are great, so easy to follow, l have used most of them and managed to sort out a lot of issues, thanks.

[@billconnelly4459]

THANK YOU SO MUCH! This was very helpful!!! I actually DID think something was wrong with my camera until I watched your video! THANKS AGAIN!!!!

[@TheWindbender]

Such an absolute wealth of information. You do a fantastic job, Tom.

[@ht6501]

Thanks Tom for another great tutorial. Simple and easy to understand. You should be an English teacher 🎓👍

[@FritzelMedia]

-2 on the contrast while in D-log is actually a bad idea, as I found out today. D-Log already maxes out the dynamic range on the sensor, and lowering the contrast will only pull whites down to a light grey, and will pull blacks up to a dark grey. Try it out for yourself. Point the camera at the sun, and switch between 0, -1, and -2 while in D-Log. The sun should be complete white, and you'll see the top of the histogram get pulled down, thus lowing dynamic range.

[@Chrome47]

Thank you for this video, very helpful having all this stuff in one short-ish video.

[@Elcapulove]

Good morning and health to everyone. Thank you very much 👍🙏

[@3000rpmdotcom]

Great video yet again, I can't wait for more in this series

[@ThatHighViewNM]

Do you have any suggestions on what settings to put the camera on for a long exposure night shot? I have been flying and filming for a month now and I truly love my Phantom 4!

[@Colin399]

The best tutorial to date

[@bmoseley320]

Thank you for the input. Your video has been most helpful. I love your settings choices and I'm currently using them with success and satisfaction. Your the best.

[@ridenhard420]

well done TOM !! KEEP UP THE GREAT WORK

[@Tsagami]

1920x1080 with 60fps is perfect!

[@nestorpool]

Hi Tom, I use to have a P3 Pro, and I just got a P4 a week ago, I have to say, this video it's great! Now I have to learn about the ND Filtres, Also I would like to see a video like this one, but about photos... Thanks!

[@nicedronevideos3035]

Nestor Pool Hi cool picture broo

[@elsuarze7]

Hello, great tutorial video...one question: for the phantom 4, do I need specific memory card?

Thumbs up ere' Tom great demo as always - plenty of information, many thanks for sharing :-)

[@MahendraPatel-kn7zz]

Very detailed and informative video...hats off to you!

[@smaakjeks]

Fantastic! This will save me some time finding the settings. Though I will be using PAL. On that note: To get attractive video at 25fps, use 1/50s shutter speed (if possible). I don't know if you were already aware of that, but in case you weren't, then there you go.

[@Boogie2157]

Hi Tom keep up the great work. Tom can you tell me what Dji goggles modes work with the phantom 4 I have looked everywhere and nobody seems to know so many different answers. Please help I got my goggles for my 60th birthday in September and still cannot work it out.

[@eddimello]

Tom is it possible to make an instruction movie about taking photos with the drone and I would to learn about raw photos threw the phantom 4.

[@MelchiorumJS]

I am sorry, but the recommendation to shoot D-Log is just misleading... People recommend using LOG profiles without understanding fully how they work or, as it is the case with Phantom, how they DON'T work. First of all, let me start by saying: DJI's D-Log is not a true Log profile despite it's name. It may look like it, but it isn't. It is basically a simulation of how Log profiles look. Log profiles offer more dynamic range, but in case of Phantom camera it does not, it just artificially lowers the contrast during the processing, which does nothing but breaks zebras (overexposure indication): you may have highlights completely burnt but it will almost never show that with zebra on the screen. You will get the same by taking any other profile and lowering the contrast and saturation in post - it's exactly that. Secondly, even if it was a true Log profile and if it offered wider dynamic range, you would need at least a 4:2:2 codec to get any kind of benefit out of it. Phantom uses low-bitrate (60Mb/s) 4:2:0 8bit codec, which is not suited for shooting Log. You will lose a ton of detail and get banding in smooth gradients, because there is just not enough data out there to grade Log efficiently. So, basically, by shooting Log with Phantom you only degrade the quality of your video without reaping any kind of benefit whatsoever. I would strongly suggest doing some research before shooting it or recommending others to do that, because right now it just feels as if people see "Log" in settings and go immediately "Oh, pro's shoot Log, so I have to do it too!" Shoot None - it's the most neutral profile in this case.

[@bennysdronereview7898]

Hi Tom! First off, awesome video! Second off , if I leave it 3840x160 I can't view it from my mac or Pc cause it lags any suggestion why is it lagging and how can I fix it thanks bud

[@MitchellPetersoncustomdrone]

Thank you Tom. Will try again with your settings. The previous footage was jerky especially when I tried live streaming......terrible and not usable.

[@kenzachharrison5768]

Great tutorials Tom - However, I am searching for the way to select RAW format for stills. Where do you change it from jpeg to RAW format?

[@ludwigfluker4982]

Very helpful! Thanks Tom! Big hug from Cuzco, Perú.

[@viliuzk]

I`m a phantom 3 standard owner, but I also find this video very useful.

[@INTELMAXELL]

+Vilius K I was thinking the same lol.

[@chaddavis2717]

+Vilius K Get the Phantom 4 with a huge DISCOUNT at DJI! Be quick because prices will be back up soon, check it out: click.dji.com/pwjuf7hPyuof3HmS

[@meteoroz]

Did you mention that if you use D-Log, you can apply a LUT in post and instantly have a gorgeous look to your movie. I would also mention (as some others have) that leaving white balance on Auto can cause all sorts of problems with the P4 changing settings by itself. You really want to set that to custom. I also like the zebra stripes so I can see what's lost in the highlights. Thanks.

[@aaronboyer883]

what do you mean by applying a LUT afterwards?

[@meteoroz]

If you use D-Log, you get a really flat looking video with a lot of room for colour correction. In a program like Final Cut Pro using a variety of utilities you can apply what's called a LUT or Look Up Table which remaps the colours correctly while keeping all the detail. You can download DJI specific LUTs from their website. They usually have an extension of .CUBE

[@aaronboyer883]

Thank you very much this is very helpful!

[@carper1325]

great videos mate . I'm in UK can U help? I have a phantom 4 pro .I'm a Very new pilot ..The camera works sometimes ? I'm getting a warning saying gimbal disconnected . Then after a bit the camera starts working ? Then it stops any ideas am i not doing something? Should this happen ? Or should camera/gimble just work all the time when controller and craft connected yours hopefully​ colin

[@johnbartlett9449]

Thank you. I am now aware how the screen image can differ so much when searching for command icons.

[@marcgiguere4098]

Great videos! Any danger to the gimbal by adding the extra weigh of a filter? I was researching filters yesterday and saw this: "Refer to the gimbal manufacturer about safely using our products with your specific gimbal make and model. Not all gimbals can safely support the extra weight. Counterbalancing the filter weight is recommended. SRP will NOT be liable for gimbal damage." Please let me know your thoughts for P3P. Thanks.

[@AV8R_1]

Tom, If you set all these camera settings using the app on a iphone, and then later decide to use an iPad instead, will you have to change all the settings again, or will they be the same that you set when using your phone?

[@uncbroyoda4077]

Tom thanks for your videos, you are very informative,and clear.,Also the editing is awesome.

[@giorgosrousetis]

Hi my friend. What do you think about better results for Greece? What settings on camera video size and NTSC or PAL. The NTSC will it work well?

[@wlacalle]

Dude, you have great videos! Thanks

[@tonyboyd5024]

Hi Tom, Just purchased my first DJI Phantom 4, learning how to operate it, looking at your video,, Best Camera Settings,, I can not find a menu to adjust video settings??? I have played around on the screen,,, nothing, no menu for the video?? Can you help. Thanks Tony.

[@UginUa]

I didn't really catch the idea why you prefer 30 fps over 24 fps? I would really appreciate if you could make some kind of explanation video with examples and comparison! Anyway, thank you for your fantastic effort!

[@thunderwood]

this was so helpful, thanks!

[@GoProSecond]

Hi Tom! Great video, helped me a lot. I'm planning to get some ND filters for my Phantom 4 now, but not sure which I really need. I fly in Denmark but will be working in East Africa a lot, so obviously a lot of sun. You recommended ND8 + 16 + 32. Do you reckon I might even need ND64 in Africa, and also is it ever useful to have an ND4?

[@reyacevedo1]

I liked your video, very specific on everything. But, I went out and made an Video yo test out the settings and I find the colors too faded, I like the colors to be a little more vivid. Any recommendations?

[@SuchetB]

Thank you for the awesome video and sharing some of that useful knowledge 🏖🏰🏯⛱🏜🌇

[@SteenPedersen]

A lot of interesting info. Thanks.

[@andreadefanti203]

Well done Tom, rgds from Switzerland, Andy

[@tesimpamonami9188]

Tom, on the DJI Go, Advance Setting, What the Gimbal Start and Stop Buffer are for?

[@MagnumVideos]

Hey Tom! I love your videos. Very informative. I have a question for you. If I'm shooting in 1080p at 60 fps in manual mode with ISO at 100 and 1/120 shutter speed and I have a +1.0 EV, which ND filter would give me the right exposure? Is there a rule for the ND value based on the EV? Thank you for the information, sir.

[@GranVlog]

TOM! please let me know what you think about the video and picture quality compared to the phantom 3 pro. How much better is it? Night or day difference or is it something that can be made simular with pc software? Also would you be so kind and share a dng raw photo and video with dropbox, google drive or something simular? I cant find it anywhere... :(

[@TomsTechTime]

+GranVlog Check out this video: kzbin.info/www/bejne/r6LEXpqZfN2Biq8 Why don't you join my group and ask someone for a photo? I'm not at home and can't share a file now. facebook.com/groups/tomstechtime

[@drrc5841]

Hi Tom, Over the years, I have always watched your videos about setting up cameras for certain drones and used that as a guideline. I have never seen you say set the white balance and flicker to auto. Can you explain why this is different on the Phantom 4 ?

[@vanessajazp6341]

I have a question about basic camera adjustments. Is this lens a fixed focal range, or can it zoom? Also, can you adjust the focus manually? And can you adjust the aperture? Thanks!

[@writeforanimation]

Thank you, very helpful!

[@Tallguysrc]

Thanks for the settings I think I got mine all dialed in now :)

[@palmerz410]

Man thats a nutty intro and graphics

[@sankhak5742]

Thanks. This was quite helpful.

[@SinkyYT]

Continuous flight index mode is also handy for proving how many flights the Phantom has done.

[@NonormalTV]

Thanks for the video, found it helpful. now to give my drone a fly :)

[@gozzay]

well explained......nice video

[@JulitoBernales]

Thanks for the nice tutorial video

[@fo727]

Very professional!

[@fpvrcstuff]

I just received a Phantom 4 for Christmas and a have just done a couple short flight s in the house , as it is minus 30 degrees outside .Both flight's were only 8 and 10 minute hovers , but when I put the Micro SD card in my computer to download the video I had no sound ......Great picture but no sound ?? Do I have to set the sound manually in the set up menu , or do I have a problem camera ??Cheers

[@maydable]

Hi Tom - great vid thanks. I was wondering how you set up iso with a shot going from inside a room to out the window into bright sunlight? Would you set up with Iso 100 setting and the correct ND filter for the outside (main view) and then switch to auto iso to handle the low light within the room?

[@maxmurray25]

I have a hard drive full of footage to edit after flying my p3pro everywhere. Can you make a video with the basics on how to use Final Cut Pro X

[@TomsTechTime]

+Max Murray I personally do not own a Mac. Sorry.

[@saishorthouse3822]

Can we get a video for Phantom 4 Pro camera settings? A video for still and videos would be great!

[@SethKHughes]

Some great tips here. Thank you!

[@FogDog68]

Very informative.. Thank you for sharing!

[@StewartVlogs]

Hey Tom! Great review

[@claudiocosterni6488]

Does this camera (in still mode) has the manual exposure also (shutter and time manual settings), or only the AE (with or without AE bracketing)?

[@qusayalaa9388]

Thanks man good information

[@securityfirst1352]

awesome and thank you for the video

[@rodrigovilleda764]

You shouldnt choose auto white balance if you would wait best results for your post. Auto balance will correct every time the light change and youll troubles to make a good color correction. So, choose any preset or manual steady preset and then try to make a color correction without light changes of your take. Just my advice. Goodvibes

[@elvisbest3213]

awsome job as always thank u sir

[@kcasunxion]

Hi Tom, i have a p4 and thinking of upgrading it to p4pro. Is there a big difference in the quality?

[@trachow]

Sorry for my ignorance, but I keep hearing, "correct in post". What software do I need to get for post production adjustments to my Phantom 4 video?

[@aslob9321]

Thomas Rachow Adobe Premiere Pro is a good place to start.

[@AlanBathurst]

excellent Tom ..thanks

[@Jitenderkumar-eq3zu]

Hi Sir please Can you tell how to rotate drone around any object.. I want tips from you.

[@DJWeekly]

Hi Tom! First off, awesome video! Second off, I'm curious, how do you find the compression and aliasing of the camera on the Phantom 4? I'm coming from a phantom 2 and GoPro Hero Black 4, and the Hero Black 4 at 4k looks AMAZING. No aliasing, really good compression to my eye, etc. Now I've also bought a Phantom 4 for stability reasons and for the intelligent modes, and I must say I'm quite disappointed with the aliasing/moire/compression of the Phantom 4 camera. I have everything set like you say, and I find things like trees to be a bit too soft and muddy, so when I go to add sharpening in Premiere it looks even worse. I wanted to get your opinion on all this, and any advice you may have for sharpening images in post. Thanks!

[@Filmersblog]

I have the same experience as you do. After shooting some 6 occasions since I bought the Phantom 4 2 weeks ago and the initial excitement wore off, I started becoming more critical and noticed quite some artefacts. Most notably the tree-leaves look like mush (instead of crisp green leaves the trees grow seaweed...)and I was getting some serious purple and green fringing (chromatic aberration) at the beach the other day. I'm afraid we have to learn to live with it until the next Phantom -or competitor- arrives on the scene... Or buy a more expensive model and be able to put different lenses on the drone. Although this guy from Neumann films did some tests with the Phantom 4 and found it was hardly a difference from the Zenmuse X5...

[@DJWeekly]

+Filmersblog it's true. I used the x5 recently and it looks the same, compression-wise. Pretty disappointing. Perhaps the x5r is better (I would hope so!) but I don't have $6,000 right now for the basic package. So yes we'll have to just wait and hope that DJI figures this out, or something better comes along. :/ For now, I've had to change how I shoot to make the Phantom 4 look good. I shoot closer to things now, or make sure there is something of interest in the foreground close to camera (between 6' and 20') instead of just shooting only trees from a very high distance. It's the only way I've found to be semi-happy with my p4 footage.

[@Filmersblog]

What about chromatic aberration- have you seen a lot of that with your Phantom? I never noticed it until my beach-shoot a few days ago. Flying low over the waves, the surf turns purple/magenta at times- really visible. And shooting from up high along the beach pointed semi-downward, I was following one of those little carts with sails on them and I noticed the sand was showing slight green and magenta tints. It was partly cloudy and the light on the beach was changing from sunny to overcast in the same shot. Maybe that did it. Plus the fact that I was shooting in auto WB probably didn't help much...

[@samuel.setiady]

Hi Tom, i wanna ask. What program that you use to edit 4k video from phantom 4? Sorry if my question very basic, because i'm very a new user to drone world. :) Thanks in advance..

[@ninorinaldi4846]

premiere pro for instance, but you`ll need a powerfull pc to watch this files in the timeline, 8 cores, plus a video card and at least 8gb ram

[@CorvusWolf]

Hey Tom what do you think about that horrible compression in green color ? I followed your setup but the green color is sucks... and what is better for you GOPRO 4 BLACK or this phantom ugly 4 camera...

[@tomasnoiemilsson9374]

Tom can you make a phantom 4 speed test and wind test?

[@jimmcmahan1424]

I have a Phantom 4. At the 1:10 mark of the video you show tapping the "menu" tab. I can't find the "menu" tab. Do I need to locate a specific area of the DJI Go App screen? I'm trying to reduce from 4K to 1080 to allow more download capability

[@toddtaylor6445]

Just upgraded to Phantom 4,also I Pad mini 2.While flying my I Pad screen jumps and turns green.Any Help

[@TrueWordFaithforLIFE]

Thank you for this excellent tutorial.

[@tbHighlandRider]

Hi Tom, why is my iPhone 6 not showing the camera Menu? I'm not able to change the camera resolution with the iPhone. I have to connect a tablet if I want to change the camera settings. Thanks !

[@JasonScarboro]

Thanks Tom for another great video. So it looks like the camera settings stay pretty much the same as with the Phantom 3 with a few additions. I remember you having some disappointments with the Phantom 4 originally, how do you feel about it now after having the chance to use it? Is it worth the extra over the P3Pro?

[@TomsTechTime]

+Jason Scarboro I will create a review soon! Subscribe and stay tuned!

[@natserog]

+Tom's Tech Time hey Tom so when I set to 30fps does that still mean its 4K? kinda confused. One friend says he videos at 30fps and its 4k on Phantom 4. is that correct? --thanks

[@JasonScarboro]

+natserog The are two settings on the Phantom 4 that allow you to shoot in 4K. The first of which is UHD 4096x2160 which gives you the wider aspect ratio but only allows 24 and 25fps. The second setting for 4K is 3840x2160 which does allow you to shoot at 30fps but gives you the standard 16x9 widescreen image.

[@alsey7]

+Jason Scarboro you kinda got it right but 4K 4096X2160 is not UHD its called 4K DCI

[@JasonScarboro]

+Jorge Castillo I stand corrected 🙃

[@natserog]

I just updated new DJI GO app April 13, 2016. I thought when I did that all custom settings would be lost. It looks like some where saved? is that something new? thanks!!

[@JimMilborn]

I have 2 transmitters. One is from a wrecked Phantom 3. Can you use 2 transmitters when flying

[@robertnichols1729]

Thanks for all the hard work and valuable information. Paypal donation sent to help keep your awesome content coming.

[@markverni6625]

I upgraded the firmware to P4 drone then New Update for Remote. Restarted all, the drone flys and watching on my screen and then after 30 seconds it goes back to Main Menu Phantom 4 white screen and I have to hit camera again. Then it works and goes back to main menu Phantom 4. Do you have any ideas what the Updates did wrong, or do I have to change any settings. Your help will be so helpful. Hope you understand.

[@visualflights4573]

Nice work.

[@smartfan7839]

Sehr gut erklärt !!!

[@carpediemi24]

Ok, I'm exhausted for shoveling snow off of our 360ft drive way so bear with me. I would like to know IF/HOW to change Video Settings to allow One Video File Per Flight. I keep getting Two Video files about 9:15 minutes in then it starts a new file on micro SD card. I know I can just drop them in the timeline on Cyberlink PD software but just seeing if there can be juts one video file per flight/landing/shutoff? Thanks

[@syfriamedia]

Awesome tips

[@monkeytownfilms6240]

Great video agin thanks Tom :)