DJI RYZE TELLO HOW TO CHANGE MOTOR ROUND 2

- SHARE LIKE & SUBSCRIBE -
How to change a motor on a DJI Ryze Tello drone round 2!
Was flying indoor and one motor just died in the air so I had to change it and the last video had such a good response I thought why not film it again? Hope that you enjoy this one and maybe learn something! YOU ARE AWESOME :D
- INSTAGRAM -
/ norwayrcadventure
- PATREON -
www.patreon.com/user?u=9431733
- CAMERA -
Sony RX100 mark II
Gopro Hero6 black
Droneview Tactic
CamLink 4K actioncamera
- GIMBAL -
Zhiyun Smooth Q
- CARS -
Traxxas e-revo vxl 1/16
Traxxas summit vxl 1/16
Traxxas TRX4 Ford bronco
Dromida Rally brushless
Dromida Touring brushless
Nikko Citroen Sebastian Loeb
- DRONES -
Hubsan x4 h107p
Ryze Tello DJI Intel
S9 micro drone
- FPV GOGGLES -
Eachine VR006

[@sonjatv4536]

Changing the rear motors on the tello is a lot more tricky. None of the videos I watched on KZbin warned me about the antennas concealed on the hind legs and so I ended up cutting the wrong(the antenna) wire. You simply have to unscrew the bottom of the tello, find the right wirings, unsolder, pull off the motors and the wires will come along. Make sure your replacement motors have wires sufficient enough to reach where you have to solder them into. Also, DO NOT REMOVE or cut off those landing pods coz that would surely damage the wifi antenna. Sorry man, I just learned from my mistakes.

[@SwedenRCAdventure]

Oh I did not know this, lucky my back motors are still working :O Need to look into that ! Thank you so much for this information Sonja Zarola! =)

[@MrDinakdakan]

i would solder them directly to the board cant stand the wires sticking out, but this one is easy

[@SwedenRCAdventure]

yeah that is a more fine job, I just wanted it to work. It is only 99$ so easy job well done =) Thank you for the comment.

[@ajalvarez1387]

Totally awesome Learned a lot🤔👍👍

[@ajalvarez1387]

You are tech expert my friend😎👍

[@SwedenRCAdventure]

Haha thank you my good sir!! 😊 😎

[@SwedenRCAdventure]

Learning is good! 😊 Thank you!

[@debojitdas9565]

AJ Alvarez mate could you help me? I got a Lenovo a6000+ phone and video recorded are all laggy with frame drop.

[@SwedenRCAdventure]

I think the phone is fine but you need a WIFI extender! I got the Xaomi MI Wifi repeater, when I use that one the frame drops are so much better :) Feels like a new drone

[@FarangJaidee]

Hello,i noticed that you tipp with your finger the left below angle of the Tello app screen and the motors start spinning without the quadcopter taking off,you did that several times,I have tried too but nothing happens,the motors do not start spining,would you tell us how ? Thanks..Al

[@SwedenRCAdventure]

You have to use both fingers on the two "sticks" and push them down to the side at the same time, it's a normal way to start drone in general =) Hope I could be of some help and thank you so much for watching! =D

[@ericw7673]

Thanks for this video. What are motors specifications and where to buy ?

[@SwedenRCAdventure]

No problem! I have no idea, I got them at micro motors warehouse :) googled tello motors :) Thank you for watching !!

[@RetroGamingonestopshop]

Awesome! Great job! #560!

[@SwedenRCAdventure]

Awesome 560! =D NICE :) Thanks for watching!

[@faisalsatrioadi2555]

Thanks bro really helpful

[@SwedenRCAdventure]

Glad I could help bro! =D

[@debojitdas9565]

Thanks mate really helpful

[@SwedenRCAdventure]

Awesome, glad it could help! =) Thank you for watching!

[@debojitdas9565]

Norway RC Adventure mate could you help me? I got a Lenovo a6000+ phone and video recorded are all laggy with frame drop.

[@SwedenRCAdventure]

I think the phone is fine but you need a WIFI extender! I got the Xaomi MI Wifi repeater, when I use that one the frame drops are so much better :) Feels like a new drone!

[@dokhtarkosoo]

How many hours did you fly before your motors burnt? I wanted to buy a tello but because of the brushed motors I'm not sure about buying it anymore. What's your idea so far?

[@SwedenRCAdventure]

I had a crash, that's why I had to change it. The other time I changed it I had crashed into water :P And some dust came inside the motor and it stopped. So I actually don't know how many hours you can fly before this has to be done :P If you are careful probebly a whole bunch of hours! =) BUY IT it's 99$ and after I bought mine and loved it I had to get the mavic for like 1000$ so :P haha

[@dokhtarkosoo]

@@SwedenRCAdventure thank you so much...

[@jdpasl]

Ouch. You are great doctor to fix it. 😆👍

[@SwedenRCAdventure]

Haha I can do it!! 😊 😎 👏🏿

[@jezziqq9986]

You are so good and cool. And your bite quality, we will not discuss because it's awesome ;-)

[@SwedenRCAdventure]

I am really glad that you think so! =D You are awesome!! :D

[@instantenerd]

Ohh god This is a Job of pig , my god

[@SwedenRCAdventure]

Nuff Nuff buddy!! Nöff is the way to go 😁😁

[@dimayasnohurskyi2805]

Anybody tried replace with more powerful motors using this motherboard?

[@SwedenRCAdventure]

I have no idea :P I sure have not.

[@chimplove2006]

ya homie

[@SwedenRCAdventure]

Allrighht 😎😎😁

[@DJKUYAALLY]

how many mm that motors?

[@SwedenRCAdventure]

can diameter: 8.5mmcan length: 20mmshaft diameter: 1mmshaft length: 5mmweight: 4.9g

[@RedBeaver111]

Finns motorerna att köpa i Sverige någonstans? Länk?

[@SwedenRCAdventure]

Köpte mina från Australien så ingen aning om de går att få tag i här...

[@aralcubukcu]

Just open the case and nothing looks bad

[@SwedenRCAdventure]

That's good? :) i suppose.

[@FarangJaidee]

Thanks it works well the way you described ...hope I don't have to change those tiny motors 😱Al

[@SwedenRCAdventure]

Awesome! =)

[@charliep2205]

Lol

[@SwedenRCAdventure]

*Skrattar ut högt 😂

[@hellebust]

försöker laga min nu... får fan inte av gummifoten! försökt i 30 minuter nu. går bra :D haha

[@SwedenRCAdventure]

Hmm den här satt faktiskt lite hårdare en den förra jag gjorde men dra upp motorn försiktigt först, tänk bara på att sladdarna är väldigt korta. Sen är det ju inget under mer som kan gå sönder egentligen. Hoppas du får ordna det Robin!! Tack för att du kommer in och tittar på mina videos =)) Uppskattas!!

[@hellebust]

min motor flög helt av i en krasch ifrån 3e våning när jag va hos grannen, så den är redan borta :D jo fan, diggar dina videos :) skickade ett filmklipp till dig på fb med igår :D hoppas du ser den någon dag ;) ska fortsätta försöka här :) plasten börjar ge vika med.

[@SwedenRCAdventure]

Aaah det var typ det som hände förra gången för mig fast in i ett träd haha så hängde motorn i en sladd bara. Tusen tack :D Såg den nu, är inte så jätte duktigt på facebook haha med page och groups men det tar sig :) Lycka till nu, hoppas att du får till det ! :D

[@rwebdaddy]

dude thats a sloppy job

[@SwedenRCAdventure]

Thank you sir! :) Glad you stopped by and took the time to comment.

[@rwebdaddy]

Well I dont mean no disrespect honestly but damn.. But hey......it works.

[@theofanisntokos]

not good work very infinite and coarse

[@SwedenRCAdventure]

Did not say it was a good work, I just show how to change them ! =) And the drone works perfectly so I am happy! Thank you for watching at least and taking your time to comment :)

[@busterhoodstar6598]

Step 1: Throw that piece of shit in the trash.

[@SwedenRCAdventure]

Oooh that's why it did not work the first time... DOH*