DJI S1000 TBM Pilot Operating Handbook "Introduction and Bench Setup" (1 of 3)

[@nsvr6]

Just want to say thanks to all the guys at TBM for their outstanding customer service and willingness to help when I needed it... They are GREAT.

[@Troybuiltmodelstbm]

nsvr6 Thank you for the kind words!

[@stephencosentino8616]

i would like to expand on what others have written and say that the manual as well as the videos are outstanding. There is an extreme amount of detail and accuracy in these training materials. I know there are very few people out there who truly understand what they are doing so this certainly helps.

[@michaelesposito9362]

Great 3 part operating handbook. Just got my s1000 and you've helped quickly answer some of my basic questions.

[@Troybuiltmodelstbm]

Good to hear!

[@arthurhohn9905]

Thank you from Virginia. Figuring out x8 configuration with A2 and Z15 GH3. This was very helpful and you guys are awesome. I wish there was a video showing configuring A2 to Z15 GH3 but I will figure it out.

[@jakekisiel7399]

I still own and operate my DJI S1000+. 9 years and I still haven’t crashed it.

[@olatron]

This is fantastic information and well presented, thank you very much.

[@hotcarp12]

Wow, thanks guys! I just programmed my FG8 as instructed on the video, that was super helpful as are all your videos! :D

[@thegonz701]

How can I set up extra accessories on the dji? I plan to add a runcam owl camera, a microphone, and a speaker. Is there a way to program those accessories to turn on and off with the A2 system?

[@RickMarshallMaps]

Thanks for the great video and all the information.

[@nsvr6]

If I did not say before, THANKS for your videos...

[@santiagoballario4341]

Hi from Argentina! I have recently bought an S1000 and this video help me a lot! I would like to know which video transmission you used or with yo could recommend me. Thanks a lot!

[@hameedullah550]

Dear sir it means we have to use 2 remote at once

[@Your_Eye_On_Sky]

can 2 of the controller working on 2.4 gh ?i mean lats say i use futaba 14sg to control the s900 connected to the a2 , can i use 2.4 gh dji phantom controller and receiver to control the camera???

[@ryanlavalle759]

I am setting up my Zenmuse Z15-N on my S900 with A2 flight controller. Can you tell me what to do with the gimbal video power cable? it says I have to solder to the wireless video transmitter. It's that my A2? Not sure what to do with it.

[@sebastiendunn8500]

Hi, great video!!! I'v got a aurora 9 and i would like to connect it to my S1000+ (zenmuse), but i don't now how to do that. Can you please help me? Thanks!

[@Viktor_DumVKopci]

Hi Can I ask if the DJI 5.8 video downlink is still in production? Or it has been replaced by Lightbridge? Thank you

[@1a-Luftaufnahmen.Photos]

Hi Gene very could Video about S1000. Just perfect!! Do you have the link to download your checklist? Many thanks in advance kind regards André 1a-Luftaufnahmen.ch

[@buchananpictures2182]

I am in Africa and I will like to buy of of those drones, how can I? Please help me

[@adsonsoares1981]

Amamzing!!!! Thanks for help us, master!!!!!!!

[@johnbatchler8551]

how many trans mitters did you use in flying the dji s1000

[@bennoclark]

Hi Gene, many thanks for excellent video and documentation resources - much appreciated. Still setting up my S1000/A2. Testing the Control Mode Switch for manual/Atti/GPS attitude works fine - however when I turn off the T14sg to mimic a TX failure I don't see the Control Mode Switch in the Assistant flipping to failsafe. Versions of everything are up to date, tried on Mac and Windows, not keen on testing it in flight.

[@Troybuiltmodelstbm]

Ben Clark Are you directly connected to the A2 with your 14SG or going through the Futaba receiver then to the A2?

[@bennoclark]

Thanks Gene: I have the Windows laptop running A2 Assistant connected to the A2 LED port via usb cable. The Futaba is unwired - so communicating direct with the A2 via transmitter.

[@ChrisMcGinty]

Great videos. I've watched all three as I work on setting up the S1000 we just acquired. I was wondering if you put your A2 flight controller on top just to leave the space on the front left open for another component? I've noted in the S1000 manual they show the A2 mounted in the lower front location. Any reason for me to go one way or the other?

[@Troybuiltmodelstbm]

Chris McGinty While our mounting methods seem odd there is a reason for them. Not always but sometimes we get a failed component or need to troubleshoot so we have everything in a place where it's easiest to get to it. This allows us to troubleshoot MUCH quicker than mounting it in a "cleaner" looking position. We also only use velco (unless it's the IMU) for the same reasoning. For someone building their own, double side tape and hidden components are an option but we are function over form oriented!

[@justin-to4th]

does this come with a remote and batteries or it has to be purchased separately because i saw some unboxings and it came with neither great video by the way

[@Troybuiltmodelstbm]

justin 9900 Thank you, it does not come with those, only the gimbal and the gimbal control unit itself.

[@StephenPatiencePhotography]

Hi there, I have an S800 (and Futaba SG14 radio) which I have not yet got into the air. I wondered how applicable the 3 videos and your handbook would be to the S800. Thanks

[@Troybuiltmodelstbm]

Fairly applicable. The only major difference would be if you had a Wookong compared to an A2 but even then they are similar!

[@edproductions360]

great video!! do you know if there's a way to log the imu data for future reference?

[@randyscottslavin]

This is excellent. Can you point me to a good tutorial to set up the controllers with the A2 and Zenmuse? Is one controller bound to the A2 and one bound to a RX(for the zenmuse?) Any advice on this would be much appreciated.

[@Troybuiltmodelstbm]

Randy Scott Slavin This is the only setup video that we have at the moment. You are correct, one controller gets bound to the A2 while the other one is completely separate and connects to the Zenmuse via a separate Futaba or Hitec receiver depending on what brand you're using. The A2 software makes it simple to bind channels to functions within the A2 and the Zenmuse has preset channels to use for pitch, roll, etc.

[@extremestudios22]

Where can I get a controller like the one you use for the gimbal.

[@Metalstorm987]

Also like the name of the data link and reciever,battery,camera

[@Troybuiltmodelstbm]

***** Hello, the equipment we used in the video is now outdated and we equip are builds a little different now. Please check our build page for a list of all equipment included: www.troybuiltmodels.com/items/DJI-S1000-PLUS.html#10 Also feel free to contact us directly for any questions or help purchasing: [e-mail] 941-342-8685

[@l.michaelbarber6370]

Excellent vid and manual. I realize the smart thing to do is to buy a Vision first and practice. However, at $1200 or so, that is a lot of money that could go towards the S1000. Having said that, could someone start with the S1000 giving it plenty of time to learn it and fly it? Another question is, are there insurance policies for it like auto insurance? Liability, comp and collision, etc? Would insuring it under a business be better like a photo business?

[@Troybuiltmodelstbm]

For practice, we actually stock the original Phantom: www.troybuiltmodels.com/items/DJI-PHANTOMRTF.html This is less than half the price of the Vision but without a camera. I would recommend flying this to get your orientation and it's robust enough to take some accidents! For insurance and things like that, please email [e-mail]. He will steer you in the right direction and give you some insight!

[@l.michaelbarber6370]

Thank you for the quick reply.

[@nsvr6]

L. Michael Barber I agree, the original Phantom is great for practice and is cheap comparable. Who needs video when you can fly one of these little puppies around in your backyard ... last i checked they are available for cheap at $349 from Troybuiltmodels they might be out of stock however.

[@Metalstorm987]

can you list all the equipment you used in the video IE:(S1000,Remote Control all the addons thank you?

[@Troybuiltmodelstbm]

***** Hello, the equipment we used in the video is now outdated and we equip are builds a little different now. Please check our build page for a list of all equipment included: www.troybuiltmodels.com/items/DJI-S1000-PLUS.html#10 Also feel free to contact us directly for any questions or help purchasing: [e-mail] 941-342-8685

[@StarBugs_SC]

Hi. Your Videos helped me much! Thx a lot for them. But i have one question. We have a S1000 with a Lightbridge and a T14 SG and a 6EX. I want to fly with an Camaraoperator. How can i bind both Transmitter? Must i use a secont reciever for the Gimbal functions? So the T14SG will send directly to the A2 and the 6EX to an second reciever or the T14 over the Lightbridge and the 6EX to an sec. reciever. Perfect would be: The T14 and the 6EX to the A2 ( wireless Trainer function?! ) because i dont want to have a wire. I heard that the Futaba-Fasst Protokoll has no problems so send parallel with the Lightbridge Protokoll. Thx from Germany.

[@Troybuiltmodelstbm]

MultiMediaCopter I'm not sure I completely understand your question. If you want to use two transmitters then the best thing to do is use one for the copter control and one for the camera control (using a separate receiver). If you wanted to do everything on one transmitter your options will be limited but it's still possible.

[@elcappy1021]

Troy Built Models, Inc. I'm curious about some single operator options with my S900 & Z15n with a T8FG, and yet be able to take it into 2 operator mode if i decide. I know its possible but I can't figure it out.

[@smallercopter3582]

MiKe Cap Also interested in this.. I want to fly by by myself most of the time. however sometimes dual would be great.

[@nsvr6]

Do you have any words of wisdom or videos of wisdom to set up S1000 & gimbal with only 1 receiver?

[@Troybuiltmodelstbm]

+nsvr6 We provide the build service to something like this and other custom options but keep in mind several functions will be lost due to the limited channels of one transmitter. The limits are worse when combining the use of Lightbridge. Please contact us for options: [e-mail]

[@josephlane5198]

Gene, will the controls, setup, et al be the same using DJI Lightbridge system?

[@Troybuiltmodelstbm]

Barbara Lane Lightbridge requires you to use Futaba transmitters but yes you could configure it on the radio the same exact way.

[@fadekonno257]

What monitor do you recommend using with the futaba controller

[@darrensusin8903]

Have you had any issues with the Zenmuse Z15-5D HD gimbal? We seem to be getting some heavy buzz in the tilt motor when it's pointed forward.

[@Troybuiltmodelstbm]

Darren Susin Is the gimbal balanced?

[@darrensusin8903]

Troy Built Models, Inc. Gimbal is balanced, but now seems to be banging violently back and forth when we turn it on. We just updated the latest firmware, and it went nutso.

[@selvesteolsen]

Great video, I have learned a lot! One thing I would like to know, the RTH function - Alt Go-Home. You are saying that the copter will descend to the value you set in A2 assistant, are you sure about that? I have heard that it will stay in the alt. it is in (IF above the set value), and not descend before it is above the GPS start point.

[@Troybuiltmodelstbm]

That's a good question. I've only personally tested it "under" the value and observed it gain altitude before "going home". I'll get with Gene on these and see if we need to make an annotation on the video, thank you! -Tone

[@CHILL3435]

is it possible to control the gimbal on a single remote?

[@Troybuiltmodelstbm]

RLJSings Yes, but it is not recommended unless you have many flight hours under your belt.

[@jamesherbert5005]

correct me if im wrong, but does this require more than one person to fly?

[@Troybuiltmodelstbm]

Flying is done with one person and gimbal control is done with another. You could however rig it to control certain things on the gimbal with one transmitter but only WITHOUT lightbridge. If you use lightbridge you can only use 8ch per radio!

[@algadgets]

it looks like the IMU & GPS mount setting is not correct , can you explain how IMU "z" setting could be -6 as its already at ground 0 lever thanks

[@Troybuiltmodelstbm]

This is because the CG for the Z axis is not on the plate where the IMU mounts, it is under it. The camera and battery weight affect this greatly. It's hard to calculate this number but even with the landing gear up, the Z number can't be 0, it has to be under the plate which is a negative number.

[@algadgets]

Troy Built Models, Inc. You are always a very comprehensive presenter and you really use to take care all of the points , will it be possible if you can make a small video about calculating the Center of Gravity for DJI S1000 or S800 , believe me even expert hobbyist do not know it correct and normally we leave it in approximation of confusions :) it works but I felt if this is not 100% accurate may be we lose flight progress a little bit. I many needs this if possible we will appreciate that regards

[@SenecaRocksMountainGuides]

awesome vids! I just bought the S900-got the 21000 battery. charger and converter from you guys a few days ago--is their a vid on how to setup the battery correctly? I know it needs to be done right, the sale guy at TBM "Bob" was super helpful and mentioned recommendations about using the battery but I can't remember them all--thanks for any help and thanks again for the vids

[@Troybuiltmodelstbm]

Seneca Rocks Mountain Guides Hi, please check our video here kzbin.info/www/bejne/h17UpZh_ZpKYbcU and let us know if you have any other questions!

[@darrensusin8903]

Hey Gene, another question for you! You've got the DUAL RATE switches set to 50% and 100%. Curious if you know of a way to set the switch in 3 parts? For example, 25%, 50%, and 100%.

[@Troybuiltmodelstbm]

Darren Susin Yes, if you used a 3 way switch you could do this no problem. Same setup but on a three way switch!

[@StevenAdusei]

Can you configure to Pilot and Shoot on one commander?

[@Troybuiltmodelstbm]

Yes you can but there are limits to what you can do with one controller. All around other than controlling the shutter it's a cumbersome way of doing it. Two controllers are best.

[@topojian]

consulta, como se graba el archivo LOG de GPS, y bajarlo como archivo

[@Troybuiltmodelstbm]

+David Castillo You can find a flight log within the iOSD.

[@topojian]

Thank you

[@darrensusin8903]

Hi there, do you have any experience flying the S1000 in cold temperatures, as in below the -10 C that is suggested.

[@Troybuiltmodelstbm]

Darren Susin We personally do not. One problem I do know with the lower temperatures is the batteries just do not perform as good as they can.

[@nsvr6]

Darren Susin Agree with the battery remark. One of the things about cold air, the colder it is, the better your performance will be. You would be able to carry more weight than in the hot summer air just like flying regular airplane or commercial jets. I doubt anyone has run performance numbers to determine how much more weight you can carry in cold air.

[@PaulGilmourTheVerticalView]

Hi Gene, Looking at your recommendation for the IMU position, X = -10, is this to compensate for the IMU being at the Rear of the centre frame...The DJI manual does not mention this fact. My IMU is in it recommended position. Thanks

[@Troybuiltmodelstbm]

Paul Gilmour If you have your IMU in the normal position for the S1000+, you will want X to show -10cm. That is the normal location. If you look at the center of the copter, the IMU on the X axis is 10cm below 0 which makes it -10cm. The manual shouldn't state this since you can put it on any airframe or in any spot you want. The A2 assistant shows you in the picture how you should come to a positive or negative number per axis.

[@PaulGilmourTheVerticalView]

Yeah the manual doesn't state the CofG difference. When I saw this mentioned in your Video I checked again, then measured the approx dist ~10...went with it. Thnx.

[@nsvr6]

Troy Built Models, Inc. Thanks Paul. Do we measure from the center of the IMU or the nearest edge of it to the CG point?

[@PaulGilmourTheVerticalView]

We do measure from the centre of the hub and if you do this it turns out to be 10cm....nicely works in with Gene's info...it also helps to understand better the X & Y axis

[@檸檬同學]

cool

[@tggaming9791]

Whats the best website to get the s1000 off, Gene?

[@Troybuiltmodelstbm]

TGgaming www.troybuiltmodels.com of course!

[@syfriamedia]

Cool

[@PaulGilmourTheVerticalView]

One other question I have, This will be my first flight with the S1000+, my thoughts are that I should do the maiden flight without the GH4 gimbal??? any thoughts on that. Thanks again

[@Troybuiltmodelstbm]

Paul Gilmour If this is your maiden flight, it may be wise to leave the gimbal off in case you are worries about a crash. Here are a few things to remember: make sure if you don't have the gimbal or camera weight, you place your battery towards the center of the aircraft to have the correct CG. There will be no counterweight for the battery without the gimbal so that's why it needs to move center. Take off and fly over grass, this will minimize damage in the event of a crash. Take off at full throttle only, do not fly it off the ground like a phantom, go full throttle then once it goes up, go back down to half. Take off in attitude mode so satellites do not matter even though you should only take off with full GPS lock either way. Other than that follow our checklist, there are many things in there that should be checked.

[@nsvr6]

Paul Gilmour Paul, how did it go? I put a counterweight on mine weighing 4.1 pounds and it flew great but I was very hesitant to push the throttle up to 100% that very first time. Flew over grass with semi-high trees on 3 sides to catch it if it took off. Also had a nylon tether on it to help retrieve from said trees if it got stuck. Maybe a bit too much but no problems the 1st 4 flights. Battery got a little low.

[@PaulGilmourTheVerticalView]

hi, it went well. I used 3 x 2200mAh old LIPO's. I have flown now 5 times without gimbal....time to put the Z15 GH4 on and test... its not good not knowing how much life is in the LIPO....kind of like flying with the Phantom V1 so it will be good to get the iOSD telemetry on my monitor.

[@johnmartin5046]

Hello! Which ones Radio System are compattibles with S1000+ and links from your store please. Thanks!

[@Troybuiltmodelstbm]

John Martin www.troybuiltmodels.com/items/FUT14SG.html

[@johnmartin5046]

Troy Built Models, Inc. Thanks a lot!

[@luiscanamarvega]

can anyone shed some light on the "flip of death" problem?

[@Troybuiltmodelstbm]

luishomeroremohsiul There was a problem years ago with bad compasses. The problem should no longer occur as far as I know.

[@luiscanamarvega]

Thank you for replying! I own a small virtual tour business in México, and I'd love to accquire one of these to offer aerial tours as well. I was hesitant because of that "flip of death" I kept reading about in forums...

[@billsherenow]

whats up with this link your sharing to www.troybuiltmodels.com/items/DJI-S1000.html. It takes me to GODADDY .com web page and cant find anything that i would want to risk downloading off that page.

[@danpalooza]

this guy kinda looks like Phillip Seymour Hoffman

[@MrDeegsy]

w

[@Toro-Tor]

"... and its gonna crash" yeah, cause its a dji. Nothing wrong with the video, neither with the detailed instructions, but i think this dji-setup is just rediculous

[@blobidk]

the setup is ridiculous because its for hobbyists and professionals that want extreme customization. It could be a lot easier but once you get it running its great

[@BrHck]

Lots of money + lots of free time = DJI S1000 manual video shooting... in 3 parts ;)