How to Relace a Wilson I Web (Double X)

This video will show you how to relace a Wilson double X I web. The how-to video for the top portion can be found below, as well as different styles found on Rawlings and Mizuno models.
Intro/Top Section: • How to Relace an I Web...
Wilson (Single X): • How to Relace a Wilson...
Mizuno: • How to Relace a Mizuno...
Rawlings: • How to Relace a Rawli...

[@scotttrcka9020]

Dirty 30 my name is Scott Trcka and was a Major League Baseball scout for 27 years and now I fix and relace gloves and you have been a great help my than I can tell you, I sure would like to talk live with you some day and pick your brain. Thanks Scott

[@robertvroman6788]

Thank you! This has always been the one lace I have struggled with. Being able to take it completely out, rather than trying to back thread it, made it so much easier.

[@whysohairyama8775]

I used this tutorial to do the “spiral I-web” so thank you, instead of doing the second x I just did the spirals like Tatis Jr glove and it worked perfectly. Thanks to your video I only had two knots instead of the three knots seen in many other gloves or spiral videos

[@michaelj5463]

I suppose you have done all you want on this topic, and I came in late, but your excellent videos are helping at least one budding glove guy still. I particularly appreciate how you make sure every single move through every single hole and twist is clearly captured. Thank you in October of 2017!

[@denburton]

Glad I found your video on the i web double X lace. The lace on my sons custom A2000 broke today and I re-laced it with no problems thanks to you!

[@poetias]

man you dont know how much i appreciate you doing all these tutorials. It really help me fix my very first baseball glove. much thanks.

[@robmeesig5510]

Thanks! Broke the lower lace today....fixed in 15min thanks to your video.

[@joshwiner4670]

Thanks man, not sure if you still use your account but I just redid my entire 1786 using your videos. Without it I had no chance. Thanks

[@catarinogutierrez3843]

thank you so much this video had good color and full details to get the job done my son's glove is ready to go again because of you .

[@ShmeeOakee]

thank you so much for making this video. I was so stuck and it helped a ton.

[@davidfialkow1232]

Great video. First time doing this and it wasn’t that hard with this step by step guide! Thanks.

[@DIRTY30TN]

You're welcome!

[@bradycampbelll]

Just relaced the fingers, web, and thumb and pinky on my wilson a2000 1975 using your videos. Great job man!

[@DIRTY30TN]

Awesome!

[@taylorw3013]

Thank you for this video. It was a lifesaver.

[@zachstephen7392]

Great video Man! Thanks for the tips. Can you do a video on relacing a Modified Trapeze web. If you could that would be great

[@brianhartley3353]

Love the videos. Thanks! Do you get your laces from anywhere in particular? How about that long threading needle? Thanks again - greatly appreciated.

[@jejay0911]

Awesome. This was a big help. Thanks.

[@therealnichols614]

Really a fan, but what laces do you undo to get to that point? I have a DP15 that was fully relaced, but I would like to switch from single to double.

[@michaelthompson1913]

Great video! How long do the laces need to be when starting?

[@johnmoraski9133]

can I do the double x on a rawlings i web? The wilson may have a couple extra holes, was just wondering if it'd even be possible in a rawlings.

[@Gabby8]

Very helpful, Dirty. Thanks a bunch!

[@tederin32]

Any chance you have or know where I can find a video of a dual post web relace?

[@jer-zeeragasa403]

I have a easton synergy catchers mitt by chance could you show me how to relace it?

[@RubbyB0906]

How long of a lace do you recommend if you want extra long laces?

[@scottventura1885]

Hey i just wanted to ask you where did you get that needle you are using?

[@peterbruce8039]

how long does it take you to clean, condition and relace a whole glove?

[@jaycarr4052]

Where did you order the lace used in this video?

[@benb6807]

I absolutly love that wilson glove

[@iarnold12gloves]

can you please do a vid on how to do the fingers and top of the iweb on a 1786

[@ryrockhard9402]

Does this also work on a U-Bend?

[@Slomo-Man]

Is that a 1788 or a 1781 cause both at the top of the web are laced in an X pattern

[@milanvdb3258]

how long has the lace to be??

[@brycecooper1341]

We're do u get your laces

[@BornReadyToPlay]

what color is that a2000 ..... absolute sick videos .... should i get an A2K 1786 or a mizuno pro limited gmp400

[@zdbaseball]

Do you have a link for the needle you use?

[@sadATLsportsfan]

I miss you :(

[@thejediknight9784]

Where did u get the needle

[@TheOfficialFreakDzns]

Where do you get your lace from? @DIRTY30

[@JUSTBASEBALLFORFUN]

What lace brand do you use and what sizes of laces do you use for different parts of the glove? Thanks

[@DIRTY30TN]

Tennessee Tanning Co. and Tanners. 1/4” for the web and fingers, 3/16” everywhere else is a good rule to follow.

[@theringer13]

Dirty any chance you can do a video on rawlings trapeze relace.

[@GRILLZnPILLZ]

Hey honestly it's not that hard. What I did was follow the lacing. So I would look at one part and take my new lacing and just follow where it went. It just gets hard at the top if it's a regular trapeze where you have to put the two laces together kinda

[@fightenjoyer]

Do you think a Wilson el3 could be web-swapped for an I web

[@HolaHola-be7mm]

Como se llama el gancho que utiliza para armar el guante por favor. gracias...

[@zdbaseball]

how much lace do you need for this?

[@TheRBCatcher32]

what kind of lacing tool is that

[@creedson43]

how much does it cost for you to relace a glove?

[@025renn]

I’m going to try this on my first base mitt

[@FelipeRocha-ju9xd]

are you selling this A2000?

[@DIRTY30TN]

Thank you

[@DanM-kp1ux]

Fantastic

[@Yotapuga]

you have online business?

[@DIRTY30TN]

Glad I could help.

[@braylonfulton5276]

What is the cost and were do u but ur lave

[@braylonfulton5276]

Lace

[@josephbuonemani9020]

Do you have video on doing an outfielders mitt?

[@DIRTY30TN]

I do, check em out

[@DIRTY30TN]

You can do this on any glove with an I web.

[@Galla-Baseball]

I disassembled my sons ratty A2000 (blonde), dyed it black. (Looks awesome), but I was thinking, before I lace it... should I do something about the holes that you lace the glove through? Like the a2000 you are using, looks brand new, all the holes that you thread the new laces through, look sharp and clean... but mine has holes that are a bit worn down. Is there anything I can do to strengthen those holes, before I thread it? BTW, you did a fantastic job with this video dude.

[@jacobchillette8441]

thank U I fixed my a2000 thanks to u

[@BJizzalBaby]

Appreciate it ☺️

[@mathewskipper4111]

What kind of lace do you use?

[@Tyguy-wi1gb]

Think he uses tanners

[@baseballl_kid]

holy shit! I love you thank you baby!

[@DIRTY30TN]

Love is all you need ❤️

[@elliotmore]

does the double x really provide any advantage? I just don't understand the purpose. (these videos are great, thank you)

[@baseballboys357]

It strengthens the web, and makes it last longer.

[@elliotmore]

gaige spencer ah, yeah. I think it looks cool too

[@allenshaver1121]

hey i have an old spalding glove how much would it cost to relace i want to do it for my dad

[@jaykedolan4663]

I relace gloves, reply to this if interested

[@allenshaver1121]

How much will it cost

[@jaykedolan4663]

$30 full glove

[@jaykedolan4663]

If you buy laces and send it with the glove it's only $15

[@barkerclayton]

how long does the lace need to be?!

[@Tyguy-wi1gb]

72 inch

[@DIRTY30TN]

I do not. Go to the about tab on my main channel for my contact information and send me details about the work you'd like done.

[@cutiepieb5828]

How long does the lace have to be

[@jaykedolan4663]

That's the pedroia model so it has long laces, but normal laces are about 2 1/2 inches

[@DIRTY30TN]

A local company called Tennessee Tanning Co.

[@Slomo-Man]

Or is it a 1786 cause I just noticed it isn't an X pattern it's just a normal spiral

[@DIRTY30TN]

It is a stainless steel threaded needle.

[@DIRTY30TN]

No, you can do this on any I web.

[@DIRTY30TN]

Watch the intro video.

[@DIRTY30TN]

Search "tanners threaded needle".

[@frankenriquez8147]

Thanks for the guide, I have a Nike I web glove and this worked perfectly. I was able to use a pre threaded rawlings lace repair kit sold at Dicks Sporting goods for $4 to redo the bottom of the I web. www.dickssportinggoods.com/product/index.jsp?productId=12357214.

[@DIRTY30TN]

No, it cannot.

[@fightenjoyer]

Damn that sucks, thanks anyway