My Brand New Tractor Almost K!LL3D Me!

PLEASE SUBSCRIBE AND CHECK OUT👇🏽👇🏽👇🏽
WORKFORIT APPAREL: www.workforitapparel.com
HYPERLITE UFO LED HIGH BAY LIGHTS:
amzn.to/3593tEv
HYPERLITE 200watt LED FLOOD LIGHT
amzn.to/2SikJVb
iYing 10.1" Head Unit:
amzn.to/3c5CfD4
FENIEX CANNON LED HIDEAWAY STROBE LIGHTS: amzn.to/38bCfOP
FENIEX T3 GRILLE LIGHTS: amzn.to/37ZXDpM
GET MY SUNGLASSES HERE: amzn.to/2SnnS0s
LED RECESSED LIGHTS: amzn.to/3a4boqc
THE BEST MILWAUKEE LED HEADLAMP: amzn.to/2KmuywY
CONVERT YOUR CIGARETTE LIGHTER TO USB: amzn.to/2IH460l
VLOG CAMERA: amzn.to/2CZfPll
GOPRO HERO 7: amzn.to/2VCZaLO
BULLET ANTENNA: amzn.to/2SK1Oxt
5" EXHAUST: amzn.to/2SLBR0u
MICROPHONE: amzn.to/2VFYtB7
JOYING HEADUNIT: amzn.to/2s8WmbD
CONTACT INFO:
Instagram:
dmaxryno?h...
Email:
[e-mail]
Join this channel to get access to perks:
/ @dmaxryno

[@DMAXRYNO]

Workforit Jerky is back in stock! workforitapparel.com/collections/workforit-jerky

[@PettyBananas3]

to bypass the seat its just a dummy switch that has a constant current you cn bypass with a jumper wire it is connected to bottom of seat metal under neath.

[@andrewturner67]

Send me one piece on the house. If I like it I will buy a bunch. Lol . I am not picky with much but jerky is one. 😊

[@Stefan_Smith]

You need the dump trailer so your not doing 7mph on that huge property

[@Stefan_Smith]

Nevermind, I see you figured it out at 25:00

[@Ben.Ferguson]

kzbin.info/www/bejne/jn7Eo4BqosqeZq8&feature=share

[@J__HUTTON]

That pile where you dump all the old brush and branches looks like rattle snake 🐍 hevan 😂

[@Bennie32831]

Better in the brush than under the front mat

[@5cent27]

Shot of gas and a match should solve most of that problem. 😂

[@danober3283]

I’d brush hog the grass down to dirt so I could have a party and light it up

[@cedricbroussard8738]

Ryan there is a guide on the front end load that tells u how far down u r. It's that lil rod that is attached to the front end loader. And the grapple bucket to pick up trees u got to tilt it down open it wide open then go down over the pile and push down and then close it!! But other than that u r doing awesome 👌

[@Airplanefish]

Definitely a camera mounted outside up front pointing at the forks sounds like a useful idea

[@keeganhansel3885]

The drone footage was a nice way to visualize the property. I didn't realize your back fence was so close to house. I thought it went back farther. Love the tractor content tho!

[@GMC.Sprint]

You should get a skid street quick attach plate to go on the 3 point in the back. Then you can put the pallet forks of the back and move the pallets easier. Edit: Always wear your seatbelt. There are tractor fatalities where people fall from tractor cabs during a rollover. There was one in the news with an airport tractor in Canada years ago.

[@ryrythan8tive646]

The freaking out and running/jumping out the cab was hilarious 😂😂😂

[@arandmusrnam]

One mod we have in our Kioti is on the top of the box grader we welded a hitch receiver to be able to tow trailers. You could fill the dump trailer with the mini ex or tractor grapple and bring it to the dump pile or be able to move dirt.

[@subvertedworld]

"We're finding the limits..." *exceeding There, fixed that for ya. lol Wish I had a tractor to play with.

[@The_JEB]

Ryan, put some red paint or tape on that rod on the right side of your loader arm when you have the bucket/forks/what ever implement level, that indicates where your from implement is when curling them

[@jjfore0921]

I know your getting a ton of advice, but the one I’d listen to is KEEP YOUR LOAD LOW! Tractors are not like skid steers. They will roll if the wind blows to hard. Also, when you attach to your quick coupler roll your bucket all the way back. It takes the weight off the latch. I dropped a grapple off my tractor because the skid steer quick connect didn’t engage all the way.

[@newfization]

You can get a rear ballast box that has weight under a utility box for shovels, picks, chainsaw, etc. Handy as heck for your setup, get yourself one with a quick hitch.

[@pastorpreacher9550]

Nice Kioti! I just got a smaller Kioti last week. But I had four weights from a older tractor which I placed on my box blade, because no welding was needed. It works great, also helps while using the box blade. Like your channel.

[@adamhenry5791]

Liking all these new camera angles

[@LordNexusTheFir]

😂 damn near flew out that thing as soon as it lifted 🤣🤣🤣🤣

[@FromLandVegemiteSamich]

John Deere 506 Mowers were made from 1978-1988 and as for trying to lift heavy things get a 44 gallon metal drum cut the top inside itself, cut holes in the sides and slide round bar to suit the 3pl hitch and weld some pipe or solid round bar from the side bars so the lift cylinder can attach then fill it with concrete from top to bottom and that will be a counter weight so you don’t tip over like you did with the car

[@2dazed685]

The farm kid in me was just saying 540 or 1000 to myself till you said it😂😂

[@jimmendoza4625]

Get a metal barrel with a 3 point on it and fiil with cement and works well for counter weight for the rear

[@HouleiO]

Loving the tractor content!

[@TheCHR1S22]

Loving the new drone angles , definitely need more

[@berkoskilandscaping4247]

You don’t need to stop working when the regen is running. You want to keep running it and keep the rpm’s up like usual. Letting it idle during a regen is actually bad for it and makes it work harder.

[@gpaje]

Get a front camera and screen installed, should make the work a lot easier, cheap and easy to install especially with modern wireless kits.

[@ToughHammer]

Check with your shop to see if it would be problematic for you, but we run a 80/20 blend of water/antifreeze in our rear tires of our tractor. About 45 gallons in each tire adds 700 lbs of weight to the rear without any major compromise. Then air them up to the correct psi. Roughly 85-90% filled with liquid.

[@workinghands1805]

Loving the new tractor man! That’s exciting!

[@dogm40]

LOL, Don't Break it yet. Detig hasn't even drove it through the dirt bike track.

[@J__HUTTON]

External roll cage for the tractor may be needed soon 😂❤

[@JeffryJForan]

Weld up a 55 gallon drum to attach to the 3 point and fill it with concrete. That's what we did at a job I worked at for snow removal, the backhoe would get taken off and the concrete filled 55 gallon drom would be attached low and far back. Cheap fix and it'd make for a cool video.

[@CrL8r]

Yes. Spline count is the tell for power take off {PTO} speed.

[@HumanTree92]

Word of advice. I have an open cab Kabota. Its best that whenever you are doing any kind of work with a front end attachment aka forks, buckets, etc have the heaviest piece of equipment on the back. For my Kabota we got just a bucket and when i use it i make sure i user either my mower or brush hog attachment. Of course you want to match the weight in the front and rear. Had numerous times when i would overload the front bucket and had the tractor up on 2 wheels.

[@madtater5948]

congratulations on your new tractor. I have the same tractor to. mine regions about every 17 hours.

[@714Joker1]

That's your sign you'll be completing your project soon. You should keep a log for the Cayote

[@seangardner8070]

The metal rod on the right side is your guide. When the rod is flush with the painted tube it means your tilt on the bucket or forks should be level or flat

[@terrydodson7637]

😂 smart man washing the Mazda when you washed the tractor

[@ryanc8188]

I've used a grapple a few times and what you want to do is open it up and go at it like / \ not | \ grabs way better!. One thing you can do for cheaper weight gain is fill the tires with water.

[@ymat5306]

Love the tractor content.

[@ductape8214]

When you’re pulling weight regen usually kicks on. Stuff breaks can’t really fault anything on it. Pretty old piece of equipment too. Thats why you gotta do your precheck right😅

[@workinghands1805]

Bruhhh! I know you where like DAMN! this tractor almost fell on me! I could feel myself thinking Run! Lol

[@J__HUTTON]

Let's goooo ryno 🔥

[@coopervroman2952]

A lot of people put tape around the rod that sticks up from the bucket up the loader arm when the tractor is level with the attachment on so you know where level is

[@Mcarson10]

On your hydraulic hoses if you turn your tractor off and the key to the on position and cycle the button for the grapple before unhooking they will come off and go back on so much easier. Same for the rear remotes on the tractor and your trackhoe.

[@kevenhiemie]

What about a three-point rear pallet fort?

[@evangibson1179]

On those tractor couplers if you tap the end of the coupler it will shoot out some fluid and release hydraulic pressure so you can hook up easily.

[@jonathanhynes5318]

HOWS IT GOING RYNO! Great day to have a great day!

[@aaronjohnson2094]

since you have an enclosed cab and a/c, I'd check for a cabin filter and make sure all that chaff or whatever it was from mowing isn't plugging that up as well. your air intake filter element may have a bit in it as well if there isn't a pre-cleaner on it

[@caelgaertz5619]

When you grapple you should try come from the top and grab it. It compresses it and grabs better.

[@c0starayban]

Ryan, rear wheel weights make a world of difference in this situation, check them out!

[@berkoskilandscaping4247]

You def need a ballast box or weight bracket to get the full lift capacity. For safety mostly.

[@dustinmittel348]

At least you got it on camera lol

[@how-i-roll-rb5796]

So was thinking of a potential affordable option before you get cameras. Wondering if you could the orange markers made for plow blades and attach them to back rack where you can see where your forks are and with the load rod on the side. Just an idea

[@burnedagain6187]

Ryno, you see the rod on the right fork at the top knuckle paint it this will help you indicate the level of bucket forks etc.

[@-Silly-Willy-0]

Hahaaa… the tractor almost tipping

[@chrisdunkley2722]

Haha, been there done that 😂😂😂

[@Bennie32831]

To spots off paint on the top of the forks helps lining up when you are buy yourself.

[@The-t3z]

Couple things dmax. The little rod on the right side of the loader is for seeing how level your front forks are, there should be a bend in it which denotes level. The pto shaft probably broke because of a bad angle. Or it was just old. You need a better counter weight to lift heavy things. And keep the the forks a few inches off the ground on bumpy terrain.

[@kevinfee3132]

Fill the rear tires with water 💧and add a little antifreeze so u don't have any issues with ice in winter if the tires have tubes.

[@countryboy1311]

I've had a Kubota and has the same seat feature but I use to just put my foot on the seat before I started moving but of course just to see

[@iconscenenews5299]

see the rod and tube on the right arm that moves when you tilt? that is for you to use to know where your tilted at. put the forks level and mark the rod so you know where your at some are adjustable to where you want to set your mark. I can do that blindfolded.

[@burnedagain6187]

Load the dump trailer to move debris! Come on ryno, starting to be disappointed in your abilities 😂😂😂😂

[@aaronb7990]

Tip for picking up small piles is to scrape it back to get it to bundle up then grab the pile.

[@Harlo86]

You could make your own ballast box attachment out of reinforced concrete for cheap. That'd be a dope video.

[@jairorodriguez3546]

I wanna see all the IEP lighting your going to add to the kioti 😏

[@geraldclemens1682]

Nice place.

[@josealvarez9371]

Your mini x an the kiotty look amazingly good together 😮 Ehhh Ryan you have sooo much work at the ranch it never ends right 😅

[@hsorenson99]

The tractor needs it own workforit decals on the windows

[@TheKilladub]

Was hoping for a video today

[@isidronunezjr9599]

You need to check out GoodWork Tractors For Ballast weight bracket and attachments

[@jasonholmes6137]

But if you pick up the loaded skid and cradle it back and the slightly about 6 inches off the ground with the as for the car lift from the engine side first keeping weight to toward the tractors cab

[@AllanLaal]

@DMAXRYNO your tractor prolly has auto-leveling for the loader arm, its very very useful on bumpy ground with heavy pallets

[@jackhinkle1401]

We hold our pallets last time we took them in the price had went up from $18 a pallet to $24. We return 200 at a time

[@richardmain8059]

Hi, check out the curling ability of forks, usually it will have no problem lifting but curling it as you want to lower the load in a flat orientation. You can put a ballast liquid in the tires to add weight to the rear.

[@BakedAnToasty]

He already has the rear tires filled with liquid

[@justinarmstrong540]

There's nothing to be ashamed of and don't be down on yourself too much there's one hell of a learning curve to running and operating farm and tractor implements.

[@davidkearley9192]

Need to add some rear wheel weights. Definitely help.

[@nathanplatt5517]

You should be able to change the settings in the computer on the tractor to not shut off when you get out of the seat. If not just run a bypass jumper wire on the switch under the seat. A lot of farmers build ballast that attach to the 3-point hitch in the back. That way you only have to have that extra weight on your tractor when you're using the front loader and it can be taken of when you dont need it to run a mower deck or attachments on the back and you don't have all that extra weight.

[@stevenkovach75]

So when will the tractor make its way to IEP-USA?

[@LivingOnWheels]

On the grapple, when you go to pick up a load rotate it down like you’re dumping a bucket of dirt and then grab the degree and rotate back up. Another lifting tip is that in general tractors have a lot more lifting capacity with the curling action of the bucket. So if you’re at the lifting limit trying to just barely get something off the ground, curling the “bucket” up usually gets it.

[@raymundo7687]

He already did, first video.

[@larryburns4605]

Water fill 1/2 full rear tires

[@LivingOnWheels]

@@raymundo7687 ahh guess I missed that in the first one 👍🏻 just ignore the first half 😂

[@DaltonEverett]

When using the grapple when you pull up to the piles of brush or whatever pull all the way up like your going to push it then tilt the grapple down onto the piles then close it and lift it

[@northernrippers9435]

I work at a kioti dealer those seat shut off are a pain when moving pallets if u look behind the seat u will see a connecter going from the seat to the side or floor disconect that and eather splice the 2 wires together or like us we have a connecter that we just unplug and put on the tractor side thats just connects both wires together then h can stand up a little or eaven get out without the tractor shutting off all the time

[@carloscastillo1557]

Make a video on the OBS grey ford!! Haven’t seen it in a while

[@fractal4284]

You should try modifying your seat's safety switch, you can connect it to an additional on/off switch. This modification allows the safety switch to function normally in the event of a rollover, but also gives you the ability to activate it manually in situations where you need to stand up. By bypassing the switch, you can ensure that the tractor does not turn off. Additionally, I would like to recommend the use of foam-filled tires for the rear of the tractor. This modification will add extra weight, enabling you to lift heavier items. Alternatively, if you prefer a more cost-effective option, you can simply fill the rear tires with water.

[@justinb1488]

Don't use water where it freezes, beet juice or washer solvent is the best if you can swing it

[@fractal4284]

@@justinb1488 I hadn't even considered the possibility that the tire could freeze since I'm in Texas. It would be extremely unlikely, almost to the point of impossibility, for the tire to freeze completely, especially in South Texas. This occurrence might happen once every few decades at best. that case, it may be more beneficial for him to opt for foam-filled tires. If he chooses this option, it would be wise to have all four tires filled. Although it will be costly, it will eliminate the concern of experiencing flat tires.

[@johnnycampbell2719]

That certainly looked like it was a brown shorts type of moment lol 😅

[@bradefulle7732]

Make a goose neck hitch for the tractor to pull the mini goose neck

[@cruzin404]

“Lazy” 😂 you just want to use your tractor 🤣

[@kevinb7540]

You should put your box blade on the back or have a heavy attachment when your doing front loader work!

[@twodogsandtheirfamily]

If you put the box blade on the back, and then put a block on top of each of the dinning tines on the box blade, it would give you a lot more ballast for picking things up.

[@jerryshoe7827]

Not testing the limits of the tracktor without the right amount of ballast weight. With the right amount of weight it likes like the car would be doable.

[@kevinfee3132]

Make sure you blow out your air filters for the engine and cab after you mow. You'll be amazed how dirty they get with only mowing a few hrs.

[@scootersl]

a 3 point mounted 55 gallon barrel filled with cement works as a great counterweight or some rear wheel mounted weights

[@BushBoy_7567]

Bro you’re going to need a machine shed soon 😂

[@4literfandaniel373]

Serious question. Did you at any point hear music followed by: “shake hands with danger”😂😂😂😂😂

[@user-zf2ug5sm4v]

I just took delivery of my own Kioti RX7320 PC Creeper on June 13th for my little 80 acre farm in Upstate, NY. LOVE IT Power is impressive. It took 7 months from order to delivery. Last 4 digits of Ser. # are 0007. I'm thinking the 7th produced in 2023??? I found your channel while looking for a 360 degree bird's eye camera system for mine. Would you be kind enough to share the brand and model number of the system you installed on yours? It looks great. I sure would appreciate it.

[@willied7759]

Rear ballast is a must it’ll change the game. Also never travel with the bucket higher then the hood To reduce tip over risks hitting unseen bumps and what not. Ask me how I came to respect that advice lol

[@noelybarra1769]

The dump truck has definitely earned the right to be called “this ol’ girl.” Nice addition to the ranch.

[@larryburns4605]

When you need service call from San Joaquin tractor be sure to ask for Eathan to come fix it

[@andyacosta1985]

I thought it was A.I generated lol I guess not the look on your face was priceless

[@DMAXRYNO]

Hahaha I’m not talented enough to figure out the AI stuff! Wish this wasn’t the thumbnail, but things happen 🤷🏽‍♂️

[@jonathandelano121]

Ryno, the manual will tell you that you can lift much without adding ballast. Also when lifting heavy always use the 4wd. There is no front brakes on most all tractors. So when you get the rear light it can just take off and no brakes or gears to slow you down.

[@DMAXRYNO]

The tractor automatically engages 4wd when you press the breaks. It’s pretty sweet!

[@jasonholmes6137]

Yeah get the wheel weight kit it will be worth the money easy one time instal set and forget it

[@wesmcelroy161]

I would suggest grapple everything in dump trailer and dump it on pile. Then go back with grapple to clean up pile when you have it all moved. Less trips on the tractor and can move a lot at once Well I commented before I saw you try to use the dump truck lol

[@starv49]

Tractor supply co has parts for that shaft

[@karenkartz3163]

Sketchy no stupid yes!

[@kennydidntdie6370]

When you try using the grapple try grabbing from the top down instead of trying to scoop