DMX Light for $28?: How to program 4 + Fog!

[@danscuernaluzysonido4790]

Thanks for your videos, from cuernavaca morelos México 🇲🇽

[@LearnLizard]

Hello to Cuernavaca Morelos México and thank you very much for watching! Gracias Amigo.

[@akoahma8257]

Thank you very much for all your videos, and teaching us without breaking the bank

[@LearnLizard]

I really appreciate you taking the time to watch them!

[@robhabash]

Thank you for teaching us without breaking the bank.. I get frustrated seeing youtubers who are like "if you just buy this 500 dollar light and this 1000 dollar controller and these 100 dollar cables then you can put together a setup like this " you should see if you could offer setups like this as a bundle on Amazon some how and maybe make a lion a referral link.

[@LearnLizard]

Appreciate the kind words! I agree that there are lots of people who want to set up their own light shows and don't want to spend a fortune. Also, if anyone buys the gear from the links in my descriptions I actually do get a very small commission :)

[@rykerelisha6834]

I realize Im kinda off topic but do anybody know of a good site to watch new tv shows online ?

[@quintonmaison7249]

@Ryker Elisha Flixportal :P

[@rykerelisha6834]

@Quinton Maison Thanks, signed up and it seems like a nice service :D I really appreciate it !

[@quintonmaison7249]

@Ryker Elisha Glad I could help xD

[@AndysKitchen]

I just wanned to ask do you make partys and thank you so much for you're videos they help me a lot a just can't stop saying thank you thank you Thank you thank you thank you thank you thank you

[@LearnLizard]

I really appreciate such kind words of thanks!! I have been using lights with bands for many years but recently things are pretty quiet with the pandemic, so I have been just concentrating on making videos. Best wishes!

[@Jacob-on5zh]

steve you're the best

[@LearnLizard]

Thanks for those kind words and I appreciate you watching!

[@keeskoppen5303]

Hi LearnLizard, thanks for these videos which are very usefull for a beginner like me. I was suprised to see that, in the few videos I've seen, you don't use a terminator. What's up with that?

[@LearnLizard]

I have a couple terminators and I have used them when I have had a lot of lights chained together but for simpler setups with fewer lights I have never had any problems without one. (guess I'm just lazy about it haha)

[@andrewfratea]

Hello Thank you very much for your videos! I would like to know if using this setup that you put in the description if I can install up to 8 lights and the same controller? Thank you!

[@LearnLizard]

Thanks for the kind words! Absolutely. The Lixada Show Designer Controller in this video can control up to 12 lights independently. Appreciate you watching.

[@TheFatmexican621]

Thank you so much for your videos!

[@LearnLizard]

I really appreciate you watching!

[@FollowingJa]

Can you control the fog with DMX as well?

[@LearnLizard]

This little fog machine doesn't have DMX. You have to spend over $100 to get that functionality on the models I've seen. Thanks for watching!

[@blvk1782]

Hey I bought this fog machine and on the second day of using it it wasn’t heating up, it was turning on but the pump and the heating element wasn’t working. I recommend just buying machines from actual brands like adj of chuavet

[@LearnLizard]

Thanks for the heads up and sorry your machine isn't working right. I also have a Chauvet DJ Hurricane 700 which looks to me to be identical the CO-Z (just with different graphics) I'm wondering if the fuse on your unit blew? I've had pumps and heating elements fail independently but not both together. Hope you can get it working again.

[@joec6043]

Is it possible to have 4 of these stage lights along with one of those cheap DMX lasers programmed with the same DMX Controller?

[@LearnLizard]

Absolutely- In fact, you just gave me a great idea for another video. (4 lights and a laser for under $150!)

[@joec6043]

@@LearnLizard Looking forward to it! Cheers!

[@Realfilmstudios]

Good morning from here sir, thank you very much for your videos, is really helping me out but I'm having a very big problem with this eDMX 1 PRO Adopter, the eDMX 1 PRO has a 4 pin female that you can plug in a 4 pin male plug but all my DMX light has a 3 pin input and output, please help me on what to do, please sir

[@hacksolot2]

thats a 5 pin, not a 4 pin, grab an adapter like this: www.amazon.com/gp/product/B00180UNI0/ hope this helps!

[@LearnLizard]

Thanks for that!

[@ewanmacquire-plows7095]

Hello Quick question With your smoke/haze have you ever experienced any signs of damp I am considering getting one but want to be sure before the purchase

[@LearnLizard]

Hi- My hazer uses water based fluid. I have run it for hours in small venues and have never experienced dampness, except for directly under the output nozzle which always drips. (I use a piece of plastic sheet to keep the floor dry) I've never had an oil based hazer, but I understand they will leave a residue if used for a long period of time. Appreciate you watching!

[@ewanmacquire-plows7095]

LearnLizard thank you for this. I have a friend who has the hazed I want to buy so I will take this into consideration when I look at buying it

[@JonniePolyester]

Oh I was hoping the fogger would be set up on the DMX controller too…

[@LearnLizard]

That would be nice, but most little fog machines like this don't have DMX control. If you have the budget for a DMX fog machine or hazer, here's a video showing how you can control one: kzbin.info/www/bejne/i5qnkpmwipmDlck

[@hescottbeats1]

i just got a set of 8 of these lights and a dmx controller for them , your videos will help tremendously. is there computer program that can be used in conjunction with a dmx controller? i know literally nothing about dmx light shows and want to use them with my band when we record videos. i’d like to automate things to make scenes change during specific parts in songs

[@LearnLizard]

There are lots of different computer programs for both PC and Mac out there for controlling DMX lights. Show Buddy Active is a great program with a built in visualizer that you can learn about here: kzbin.info/www/bejne/laKTi6x9iJWJjbM I also use an iPad with an app called Vibrio which I show how to use here: kzbin.info/www/bejne/qp_ch3uFapWAnJI Good luck with your light show and thanks for watching!

[@harryhu5840]

Is there a way to phone or message you?

[@LearnLizard]

Hi- you can always email me at [e-mail]. Thanks!

[@SETLIFE2022]

Hi sir tutorial for pearl controller thankyou sir

[@LearnLizard]

Do you have the Mini Pearl? That looks like an awesome controller! I'd love to do a video on it if I could get my hands on one. Appreciate you watching sir.

[@chopsie4078]

hello some of the products you use are [currently unavailable] and all of your lights are so amazing that i really would like to purchase and it makes me upset because things you have are terrific and you ready help me that's why my channel is called [DJ chopse 40] because i really want to be like you except from that keep it up you are so amazing and help me every day thank you so much 🙂

[@LearnLizard]

Thanks for those nice comments! Also thanks for reminding me to go back and check the product links in the video descriptions. I will try to make sure there are only links to items that are still available.

[@chopsie4078]

Thanks so very much you’re always so nice😁😀