DO STIFF ENGINE MOUNTS MAKE A DIFFERENCE?

[@360rocketz]

This made me confirm my decision to go with standard mounts

[@abrasive59]

I just installed all polyurethane mounts and now my ride is back on my lift im going to go back with stock rubber mounts. The car vibrated me to where I was almost numb lol

[@fuser4397]

You have to break them in. They get smooth with time.

[@miguel-ye4dy]

@@fuser4397 how long it takes to break in? 💀. Both my da and dc4 integras mounts are doodoo, tryna find good mounts

[@andresrenteria2131]

@@abrasive59 bro Im so annoyed of mine Ima just get standard ones 😂

[@user-hh4hc2lt6e]

@@fuser4397 HOW LONG DO THEY TAKE TO BREAK IN??

[@cameronmelton4328]

thanks for the TIP on how to remove stud

[@richport8146]

I just put my mounts in.....went with 60a for daily lil vibrantation but the response on the car is next to nothing. And the clutch feels good

[@tuftwrld]

What do you mean the response on the car is next to nothing?

[@richport8146]

@@tuftwrld quick throttle response.

[@Pier1668]

@@richport8146 and the transmission gets louder like in the video?

[@richport8146]

@@Pier1668 yea, especially in reverse. You feel the vibrations, and after a week you get used to it and it feels normal.

[@richport8146]

@@Pier1668 I have them on my Ep3 si

[@clcampbell85]

lol dude u can hearz duh tranzmission whine... its like a dogbox right now!!

[@kawboykody]

Good video man! Hasport mounts are such a good investment! That piece of the linkage you reffered to as the traction bar is actually the shift linkage stabilizer bar or "linkage stabilizer".

[@BelligerentGamingOnline]

I have a B series Del Sol woth OEM engine mounts but I just went with Solid/Poly torque mounts and that's really all it takes to have a horrible racecar rattle 🤷‍♂️😅 (definitely more responsive though).

[@rjaybruhh]

*_Looking to get stiff motor mounts for my 97 Civic eK hatch also. It is a D16 though. Doing my research until I find some good ones. I might pick these up though._*

[@fragilestoodios]

Which ones did you pick? I also have a d16 with blown Engine mounts please 🙏 if you could recommend

[@candyrosario115]

Yea bro dont worry bout the noise it breaks in later on gonna go back to regular sound,sicc ass video tho u da only one who made the most precise video about the rear mount 👌🏾

[@leomartinez3368]

? Do the noise or vibration breaks in?

[@fuser4397]

@@leomartinez3368 yes

[@user-hh4hc2lt6e]

around how long does it take to break in

[@steveadams1245]

Give it like a good 4000 miles to break in depends how u drive

[@project_ej2]

I recently put 1320 mounts in my eg coupe with a b18b1, and it rattles like a MF lol my GF hates it now lol 😆

[@fuckbeingbroke2]

yea i was gonna try those however want level II hasport

[@flatwoodzmafia]

I got Sickspeed mounts, and i think theyre the 92a mounts, i got them for Christmas so i didnt actually buy them, but they rattle like crazy. I don't mind it 😅 no one else likes it

[@rottenapple8333]

HASPORT‼️ ON MY 2007 FA5 LOVE IT. ONLY INSTALLED UPPER TORQUE & REAR MOUNT 62A‼️ BIG DIFFERENCE .NICE AND TIGHT‼️

[@Triple259772]

Rich S how’s the vibration? I ordered the full kit, just came today. Can’t wait to install it

[@JB-bc9cj]

How do you get rid of the rattling? Just uprated my clio 182 engine mounts and everything in the car rattles!!

[@garrettr4752]

With performance motor mounts the whole point is to prevent the engine from vibrating separately from the rest of the car so more of the engine rolling or torque goes to the wheels more immediately (because the engine will no longer roll in the engine bay). So with that said engine nose is going to increase dramatically unless you go with less performance oriented mounts

[@JB-bc9cj]

Garrett R thanks for that very detailed and useful!!!

[@felixvalenzuela6052]

1997 honda crv , all wheel drive. I do go off roading, mildly. I am looking for a decent set of motor mounts. That would better handle the jolts , bumps, different angles , and uphill stress. I think I want something better than stock. I'm not sure so I'm watching a lot of videos on this stuff. This is the first video I seen of this name brand that you installed. Thanks in advance.

[@milk7360]

Hasport is a leader when it comes to aftermarket motor mounts for Honda/Acura. They are much more pricey because all mounts and tech are designed in house and the mounts are made in the US. You would be in good hands with hasport. I have seen some people get away with copycats and lesser brands if you don’t wanna fork the money

[@devonkaufman2482]

I got the same style crv. What mounts did you go with? It looks like oem would be best.

[@leonibs5034]

my Em1 civic stock engine mounts let the engine flex so hard the harmonic balancer dug into the frame rail and destroyed the pulley 96/00 driver side are the worst mount designs

[@dcrews95]

LMFAOOOOOOOOOOOO DAMNNNNN 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 that bad huh 🤔

[@zachnuketown]

That's on you dude. If you let a stupid problem like that go long enough to do real damage you're the only one at blame.

[@conngocbh]

Can I ask you, after installing the rubber tripod, the situation is less vibration and noise reduction compared to the tripod rubber manufacturer of the manufacturer?

[@iintegral9606]

Which mounts are the exactly ? Because the highest one is race and then the two below it are extreme race and super extreme race.

[@iintegral9606]

Let’s see if I’m tough enough for it

[@TimothyAndrewMorgan]

@@iintegral9606 How was it?

[@JfilliaPlays]

i just got 1 for my delsol its 62A street driven. eventually will do the other two. shits not cheap though. the one im replacing is clapped pretty bad anyway

[@lifenz1]

Bro how does the 62A feels? Any vibration?

[@petitlarouses]

I would like to know too hehe

[@stefano182]

What was the stiffness on these mounts, 62A?

[@luis_eg6929]

Where did you get the bolts for the transmission I only have one bolt and the other 2 are studs ?

[@reverester317]

Which kit is this mine are same ones needed

[@iivv_nn]

What did you guys paint the car with? And is there a video on your rear bumper cut?

[@Rsxnation0]

So more me rattling coming from the engine bay cuz my teggy doing that

[@MonkeyWrenching]

2:42 😂 my man ✌️😎✌️

[@MrOmar818]

Did u ever have a problem with bolts getting lose after a while and falling out do , to the vibration

[@rottenapple8333]

Omar C TORQUE WRENCH NICE & TIGHT.

[@leslie7872]

@@amphedroxyn4251 *lockwire 😎 airplane style

[@lucac4752]

the engine is stiff!!

[@petern7731]

I got these too! Fkn amazing

[@fuckbeingbroke2]

Thanks team

[@jcwick0859]

the transmisson mount sucks on those went to try and install it and it doesnt fit holes all line up but the way they designed the mount made it so it doesnt fit u have to really modify it and thats something i dont want to waste my time with ... worthless waste of money

[@ahkau4612]

Transmission/driveshaft teardown after high mileage will be the test

[@aidenater]

There should be less wear on the trans and driveshaft, since there isn't as much slack. It allows the connection between engine and transmission to be more precise and efficient. That's my view on it anyway. I have Street mount bushes and the gearbox is a lot more smooth and i have heaps more traction to the wheels (FWD).

[@MrQwe147]

Hello cracked engineblock

[@3.0TMKreaZ]

Stiff mounts all around crack the block?

[@steven-vn9ui]

@@3.0TMKreaZ You're right. Block won't crack, solid mounts however will run that risk.

[@iivv_nn]

@@3.0TMKreaZ There has been times, when you run a solid mount on the engine and a softer one on the transmisson

[@curtiswilliams6754]

Wrong they do not crack the engine block at all. I've had them many times before never an issue

[@KeepinItReal890]

doubt it dumbass