Dodge D150 Turbo Kit Explanation. Small block 360 v8!

[@gertv6777]

I had so much trouble with my Fitech kit and tach issues that i returned it and am running holley sniper, im glad to see you built your kit the same way i was thinking about for my ramcharger

[@kpgsx]

The 6875 DNAmotoring GT45 is perfectly suited for a 5.2-5.9L wanting 500-700hp.....👍 You could use factory manifolds with v-bands and 2.5" crush bent exhaust tubing/hotside.

[@donclark8851]

Nice job dude. Thanks for the content.

[@BackinHaction]

Thanks for watching!

[@leematoadgaming4945]

Good lord that fucking Cricket

[@andrewmcarthur9868]

Sweet explanation! Makes it seem a lot easier than it is 😅

[@BackinHaction]

Glad it was helpful!

[@BobF315]

eBay gt45 is sized much better for that application. The turbo you have probably runs a 2:1 back pressure, even at 8lbs. If you are injected then you shouldn’t have a mechanical fuel pump. Run a block off plate and run your oil return there.

[@BackinHaction]

The oil return in the fuel pump hole is a good idea! I hadn’t thought of that. I couldn’t find any good resources for turbo sizing so i guessed. When it was driving, i had a hunch that it has excessive exhaust back pressure but i wasn’t sure. Thanks for the input

[@BobF315]

@@BackinHaction a T4 flange will work well in the 400-900Hp range and should have a 1.0-1.25AR for most 300+ cu.in. engines. a 66mm compressor inducer is good for around 600hp, a 75mm 7-900, 80mm 1,000, 88mm 1,200-1,400. Basic guidelines. I had a GT45/1.05 for my 360 and have since sold it as I am stroking to a 408 and switched to a 7582 1.25 T4. That GT45 or a T04Z would also work well for guys with a 318 looking for 600hp.

[@the_car_guy5915]

​@@BackinHactionThat's genius! I'm wanting to do a project where I get 1,000 hp from a factory block 318. I WILL be remembering this.

[@brianthecarhauler2915]

What turbo did you use? Did it have much lag? I am in the process of doing a turbo 318. I was thinking of using the GT45 Turbo from ebay. Thanks for the video

[@trentonreynolds2607]

Do you know how much boost a factory Dodge 360 LA from 78' would handle?

[@Gdaddygabe]

From what I’ve seen on some forums they say 3-5 lbs with stock internals

[@trentonreynolds2607]

@@Gdaddygabe thanks!

[@BackinHaction]

This was 8psi stock internals with no problems

[@BackinHaction]

And very briefly up to 12 psi when I was fine tuning the wastegate

[@trevorkitzerow9287]

Hi

[@BackinHaction]

Hey buddy! Thanks for checking out the channel

[@countryboisavage]

Sell me that turbo kit