Can you do a video on the wiring for the power seats
@meloshredder868 жыл бұрын
love the ingenuity man, I'm picking up an 07 tomorrow and im looking around for ideas to make it a little nicer.
@BurgaBea_Stro Жыл бұрын
Check ebay I've found seats and entire interiors
@Lifted-Horns-4x44 жыл бұрын
I LOVE THE LOOK OF THAT!! I am a p*ssy when it comes to wiring stuff like that, ive been shocked too many times. I just will not do it.
@DAMIANFMARTI153 жыл бұрын
Thank you! I’ve been wanting to do this to my truck.
@juangonzalez-wr5oc5 жыл бұрын
Could you show a wiring diagram for the front seats?
@tlover945 жыл бұрын
Also the seats for the crew cab are longer than they are for the quad cab. But nice job though.
@Victorsfastauto6 жыл бұрын
good job! if you can make a video on how your wired it up that would be great!
@markm00006 жыл бұрын
Crew cab seats are freaking huge. The 4th gen quad cab seats would definitely work better but you can't get them in leather. So the way to go about this is to get a set of cheap 4th gen quad cab cloth seats and send them in to get converted to leather and heated/cooled.
@hunterlangemo73926 жыл бұрын
This is a solid idea! Especially for folks that also may want the solid fold bench over the 40/60 split. The solid bench is also only available in cloth. If you end up doing this, let me know what the price is and how the product turned out.
@7tiugfhy6 жыл бұрын
How did you do the wiring for the power motors? I’ve been battling that in Both my 3rd gens for 2 years bow
@chinito20fam6 ай бұрын
Where did you ourchase them from?? Have a dodge ram 1500 quad cab. Tried looking on facebook and nothing
@milkmanjamez74985 жыл бұрын
How much were the seats
@Sddowne6 жыл бұрын
You can hook up the heated seat to the factory harness The harness is already there in the the dash - if you look underneath the driver side Stairwell column and look by the Emergency breaks your have 2 wires they are not run to anything you just run those 2 wires down to the heated seats and then your have your factory heated seat and you can control those seats up by the dashed by the radio I hook mine up and they work great
@zacherywilson58856 жыл бұрын
shane downes What year is your truck ? I got a 17 I'm about to up grade to leather. Any info would be greatly appreciated.
@Sddowne6 жыл бұрын
Zachery Wilson mine a 2007 most of dodge will put the dash harness with the heated switch plug just pull out the center bezel and look if it has them just buy the wire diagram and hook it up underneath the dash not hard
@tylerspence72483 жыл бұрын
Where did you find the seats I need to find those seats asap!!
@juancarrillo-gp8yj3 жыл бұрын
do the bolts from any newer ram seat line up to the holes in a 03 quad cab
@BurgaBea_Stro5 жыл бұрын
Hey where did you find your seats, I'm looking to do the same with 2006 mega cab
@mitsnfect8 жыл бұрын
Nice job! Are you going to make a video of how you found which green wire you used for the heat. No one has been able to use the factory heat in these seats. It would be much appreciated. and the fan for the seat. I am working on the same thing in my 03 ram. I an working on a gig to mount the center console from a 14 ram. I would love to have the fan and heat working. I also am running a USB cable from the center console to behind my radio.
@LifeWithChase8 жыл бұрын
+mitsnfect I just unzipped the seat cover on the side of back of seat and unclipped from the bottom enough to get my hand up in the seat on the bottom and the back to feel the 2 wires coming off each heat pad and traced them back. the lower seat pad is grounded on 1 wire the other runs to the back of seat heat pad connecting them in series, then the final wire off of the back heat pad is the green wire you connect power to. Im still working on a resistor of the right size and wattage to wire in to make the heat work on a low setting, so right now i just have high heat. might make another video if i ever find a resistor that works properly. as for the fan just find the plug where the wires plug into the fan motor, just a small 2 wire plug trace wires back for enough to have room to cut them, connect one to hot and one to ground, if it doesn't run reverse wires around, fan motor will only run one way is what i found. i just put it on a toggle switch but you could put a high low switch with a resistor in low side to make it 2 speed if you wanted to get fancy with it, or a rheostat.
@mitsnfect8 жыл бұрын
+chase5726 Thanks. I have my truck torn apart right now. I thought I could use the USB in the center console to charge my phone. That is not as simple as I thought. LOL but working on it. Please make a video and I'll be watching. So do you think 1 resistor will make both hi and low heat settings work?
@LifeWithChase8 жыл бұрын
+mitsnfect I didn't bother with the usb, looked like more trouble than worth lol. but if you have a 3 position switch for seat heater just connect seat heater wire which ever position you want to be high heat, that will apply 12v to seat heater now on the low position on switch you will need a resistor, so that when the switch is flipped to low, current has to go through resistor to reach seat heater wire, giving you a low heat. I have not found a resistor of correct ohm and wattage to do this yet. I tried a few and they were to small so they got to hot, still working on it. so for now I just turn switch on high and after a few minutes turn it off. so if you just wanted high heat just hook a normall toggle switch up and you will be good to go, much better than no heat.
@mitsnfect8 жыл бұрын
+chase5726 Any updates on the resistor for the seat heater? Did you hook up the lights underneath the back seats.
@dereknelson16dn7 жыл бұрын
mitsnfect I have a 2003 Dodge Ram also... I'm curious to know how well yours turned out?
@djcon7 жыл бұрын
Awesome!! thanks so much for the video!! i want to do the same but put 4 in my '06 mega, front and back. guess ill have to wait till i got 8 g's layin around!
@__WJK__5 жыл бұрын
Nice! Especially like the additional cup holders on the front and back center "jump seats". Now I'm thinking about swapping mine out. One potential snag... did dodge not offer a storage bin on the lower half of the jump seat on the 4th Gen? Not sure I wanna give up that extra storage. Hmm... would be awesome if the top half of that 4th Gen console could be removed and bolted onto the bottom half of the 3rd Gen's jump seat hinge mechanism(?)
@Dirty_dodge5 жыл бұрын
The 4th gen has storage in the lower. Just did mine today
@NathanielMolina-fj9wi Жыл бұрын
Wat set up do u have for your stereo I just purchased my first truck which is a 08 1500 hemi needing help
@nitesoftheday6 жыл бұрын
Seats look good I did a seat conversation in an 02 2500 to 16 seats and looks great did have to do a seat belt mod tho
@chinito20fam6 ай бұрын
How so any specific info I need to know.. pops has a 2003 dodge ram 1500.. man and I haven't seen any seats I like just yet..m thought you could only do it for that year... Am in Florida. Where is it possible to get a cars more leg room..
@gotthumbs22354 жыл бұрын
So does this mean the bolt pattern for the seat frames are the same? I tried listening to hear if you had to re-drill new holes for the front seats... Can you clarify what was needed to bolt the new seats in? Thanks and it looks really good.
@LifeWithChase4 жыл бұрын
Front seats will bolt in but the console needs a new hole drilled. I never bothered to drill the extra hole for the console or install the middle seat belt cause nobody rides there...
@cesarm.gonzalez26637 жыл бұрын
awesome job! the look really nice. wish i could swap out my 07's cloth seats.
@luigicardenas66313 жыл бұрын
I have 2019 Laramie seats going into a 2009 3500 have to make a couple adjustments tho.
@squid00135 жыл бұрын
Did they bolt to the existing frame or require the 4th gen frame?
@beamj15 жыл бұрын
How much did you end up getting the seats for? I have an ‘08 and have been looking for just the fronts from a ‘13-current but can’t find any reasonable priced?
@twinstealth8 жыл бұрын
if you don't mind me asking where did you get your seats? I'm wanting to do this to my 07 also.
@LifeWithChase8 жыл бұрын
+Brad Clifford (TwinStealth) Ebay.
@aa0251315 жыл бұрын
Where did you get the wiring schematics, I have the same setup but colors are different for generations.
@adrianhernandez38024 жыл бұрын
Will 4th gen seats work with the 3rd gen laramie plastic center console? Really like the original center console but am wanting the leather, heated and cool functions lol
@CaptainNico3502 жыл бұрын
Does the console juat bolt in or did you have to modify the floor or bracket?
@davelambardo64644 жыл бұрын
Man these seats are hard to source. Gotta jump on the reasonable priced ones. Or over pay for rough ones. Did you try it with original console? Mines a manual trans even harder to find a manual console
@LifeWithChase4 жыл бұрын
Didn't try it with original console. My console looked pretty bad from laying my arm on it. This video was done several years ago so I don't remember much details, but yeah these seats are hard to find in good shape.
@davelambardo64644 жыл бұрын
@@LifeWithChase thanks for reply! Happy New year!
@Ethan_LeBlanc Жыл бұрын
How did you go about wiring the electric seat?
@MrSharpsh00ter4 жыл бұрын
How did you deal with airbag? That is my issue trying to put 2012 seats in a 2013 truck.
@LifeWithChase4 жыл бұрын
The air bags were removed from the2015 seats when I got them and 2007 trucks didn't have air bags in the factory seats so there was nothing to hook up.
@MrSharpsh00ter4 жыл бұрын
@@LifeWithChase thanks for your time and reply. Im having trouble figuring it out and trying to seek any help. Sounds like yours was simple and easy. Thanks again
@GioAco.7 ай бұрын
Do you remember what color of the wire was the one for the seat cooling?
@LifeWithChase7 ай бұрын
Been almost 9 years ago, I don't have a clue 😂
@cameronluallen62787 жыл бұрын
I am putting 2015 leather seats in my 2011 ram 1500 and all my electronic system lights on my dash came on. (Airbags, windshield wipers, traction control, engine light, no rpms, no speedometer, etc.) They all came on but truck runs fine. I just hooked the seat up. I haven't hot-wired anything yet. But if I unplug it and wire the power to the seats, will the lights go off? Or do I need to get to the dealership and get it flashed??
@chadandhayleysmom6 жыл бұрын
Did you ever figure this out? I have a 2011 Ram 1500 and I am looking for a power seat, preferably from a newer truck. Did the newer seat bolt right in without modification?
@christopherstapleton25504 жыл бұрын
Did you put in an updated dash and door panels?
@tcflint3 жыл бұрын
Where did you attach the seat belt? The 4th gen seat doesn't have the same mounting point on the seat as 3rd gen.
@LifeWithChase3 жыл бұрын
Drivers and passenger was the same I think and I left the middle seat belt out. I was gonna go back and drill for the middle seat but never did, no one rides there anyway.
@josep2110803 жыл бұрын
Hello the, are those a direct Bolt?
@SvoBrianRobles8 ай бұрын
As far as bolting them on 4th gen to 3rd gen how hard?
@NastyNate988 жыл бұрын
I want to do this but think I will leave the factory back seat in. 4th Gen rear seats seems like they take to much room up in our trucks. Maybe just have the leather dyed black.
@LifeWithChase8 жыл бұрын
could be a better option i just happen to stumble across this set and so thats what i went with
@rokkero5647 жыл бұрын
Thats because you need to get rear leather seats from a 4th gen QUAD cab. The guy in this video got the seats from a crew cab it looks like which is why they are much bigger. Quad Cab seats are perfect fit for the older 4 door rams.
@El_chopo_ls35 жыл бұрын
@chase5726 how did you power the seas?
@sk8tinboy65 жыл бұрын
Hey how’s it going can you do this to a 2nd gen or put 3rd gen seats in just curious
@JesusMartinez-lh9eu6 жыл бұрын
So does the jump seat bolt up or was it just laying there? I am looking into some 09 manual seats for my 05. No power just want to make sure the 3 seats bolt right up.
@LifeWithChase6 жыл бұрын
middle seat doesn't bolt up with all the bolts, as described in video
@JesusMartinez-lh9eu6 жыл бұрын
chase5726 does it move around like that? You haven't bolted yours down?
@IcedAssault4 жыл бұрын
My 08 the lower center seat has a cubby so all I swapped was the back rest to gain the cup holders. The tops swap right over, very easy.
@gonzalezgrant5 жыл бұрын
We're could I buy that plastic mole that has the controls for the seat at .
@justinhill647 Жыл бұрын
What wire is for the seat coolers. ?
@aa0251315 жыл бұрын
Do you have instructions on harness adapter, or wiring to get the power seats working? I have those same seats for a 2008 Ram 1500 Quad (manual seats) and will have to make the same mods for the rear seats as you did. I can get air and head instructions later, I just want to get the power seats working first.
@LifeWithChase5 жыл бұрын
sorry man no instructions and I don't remember, this was over 3 years ago.
@aa0251315 жыл бұрын
@@LifeWithChase Did you already have power seats in your 2007, or were they manual? Did it require an adapter to get the new seats to work or did you work magic there too?
@__WJK__4 жыл бұрын
Been wanting to swap my stock 03 3rd Gen (5.9 SLT) rear seats for a set of rear seats w/the fold down center arm rest for years...!...anyone happen to know which years (after 03) had the folding center arm rest that will fit an 03 5.9 SLT(?)
@grantfoxworth5 жыл бұрын
Will a 4th gen center console fit in my 07 megacab without the 4th gen seats?
@Dirty_dodge5 жыл бұрын
Yes it will no problem
@roberttrussell10103 жыл бұрын
were those seats out of a 1500?
@bartender420x6 жыл бұрын
Do you having a wiring diagram?
@nolascoedwarden2 жыл бұрын
Is there a tutorial for how you did it?
@joshberube53346 жыл бұрын
Is there anyway you can contact me? Have a few questions thanks
@AtwoodBoxing8 ай бұрын
Do I have to modify anything? Also I'm looking for a grill that says RAM does anyone know if they make one 2007/1500
@dtaposse88583 жыл бұрын
Do u have a link to the power lumbar seat thx
@XXKILLERCALI2137 жыл бұрын
Can a 2002 Dodge ram 1500 leather seats with switches fit in 2004 Dodge ram 1500 :note 04 ram has regular seats
@chinito20fam6 ай бұрын
Any look I also want to get upgrades to a 2003 dodge ram 1599 quad cab normal front doors but the back is a bit less legroom isn't a totally full 4 door. I could care less about the price but as long they are legit I wouldn't mind... I actually just think I'll invest into it.. since I already know how to do all the work on it.
@GlynRobinson6 жыл бұрын
awesome job! Looks great!
@jtp98627 жыл бұрын
Just ordered up larmie 2017 black leather seats for my 2007.5 dodge SLT mega mega cab 6 door truck, i've switched seats before so i'm not too concerned with the initial wiring for moving them forward back up and down, my main questions are what do i need to do to get heat and cold to work on the new seat. My original seats did not come with heat and cold options so i'm 99% sure there is no wires provided for the hot and cold option. Can you tell me what i need as far as material, wiring ect.. i'm not an electrician so any help. I want the heat and cold to work on both front and middle rows the back row in the mega mega X2 is just typical back seats so no wires needed. Thanks for any help on material specifics on how you got it done for heat and cold.
@LifeWithChase7 жыл бұрын
just have to sort through and find the wires for the heat pads and the cooling fan. I was not able to get the low heat to work satisfactory, so I just have high heat and cool If I were to do it over again I would use a standard heated seat switch which has a high and low position, and use one position for heat and the other for cool, instead of seperate switches like i did. But all you need is a fused hot wire from somewhere think i used the same wire for the power seat function tied into it ran it to the dash to the switch and back to the heat pad in the seat, same with the cooling fan.
@probstdog7 жыл бұрын
chase5726 ok thanks fir advice, where did you get the switches?
@LifeWithChase7 жыл бұрын
ebay sells the little heated seat switches
@jtp98627 жыл бұрын
www.amazon.com/Sunautobuy-Universal-Heater-Switch-Control/dp/B00YC1GAMU/ref=pd_sim_263_5/134-6983601-1955720?_encoding=UTF8&pd_rd_i=B00YC1GAMU&pd_rd_r=BWH4CQKRPDGVV9JXVK2P&pd_rd_w=Xfgca&pd_rd_wg=mS8VG&psc=1&refRID=BWH4CQKRPDGVV9JXVK2P Found a Universal Round Seat Heater Switch Heated Dual Rocker Hi/Low and Off. Is what your saying the simple solution is to have the Hi wired for heat the Low wired for Cooled and the Off is Off. And this should allow the hi to be hi heat and the low to be High cold. So this would save me from having to wire mutiple switches to do the same thing?
@jtp98627 жыл бұрын
Also do i need to order a relay harness or something to tie into the electrical box or do the existing wires all work?
@grandjourney58235 жыл бұрын
Where did you find these?
@kevinkerrigan23038 жыл бұрын
Where did you find these ? I found a guy that wants $1900 plus shipping
@LifeWithChase8 жыл бұрын
ebay, yes they are expensive, and hard to find in good shape, they are way nicer than what came in these trucks though
@darryllgriffin77147 жыл бұрын
Just wonder if I could hook up say like, 2008 r up, dodge the whole dash setup, and seats in a 99 dodge 1500.
@LifeWithChase7 жыл бұрын
no idea
@markm00006 жыл бұрын
You'll need to get creative with how things mount and prepare to cut up the dash. It should work but you'll need the patience of a saint to make it look good.
@aceaceac7 жыл бұрын
nice looks original
@ChrisTopheRaz3 жыл бұрын
Do you have any idea if that could be done for a 2004 quad cab?
@matthewmoser1010 Жыл бұрын
I know this is real late but I put the cloth seats from a 2017 ram 2500 in my 05 1500. Front seats are direct bolt on. The middle jump seat/center console I needed to drill new holes for. The rear seats I also needed to drill holes for. Wasn’t very complex though. Got it done in a day. I will say though, the seats I got were for a crew cab truck and there is hardly any leg room in the back because I have the quad cab. But they look nice and fit short people lol
@ChrisTopheRaz Жыл бұрын
@@matthewmoser1010 It’s better late than never lol. I appreciate the response but I blew the engine on my 2004 and I now have a 2017 Big Horn 4 x 4. A much better truck for sure
@matthewmoser1010 Жыл бұрын
@@ChrisTopheRaz that’s a nice truck. Hope you’re enjoying it
@ChrisTopheRaz Жыл бұрын
@@matthewmoser1010 absolutely! Thanks man.
@dylanhanson26787 жыл бұрын
was your truck a ram ST? I have a base model 06 ram ST I'd like to put power seats in. Anyone hot any pointers?
@LifeWithChase7 жыл бұрын
I already had power drivers seat so all i did was extend the wires over to the other seat.
@Jameswilliam19824 жыл бұрын
well done man
@huntermountjoy18003 жыл бұрын
What size resistor did you use on the low heat setting?
@LifeWithChase3 жыл бұрын
I tried a few different ones wasn't satisfied and I never got back around to it so it's high heat only or off.
@huntermountjoy18003 жыл бұрын
@@LifeWithChase what color wires operated the heat and what colors operated the cool?
@squid00135 жыл бұрын
I would be interested in a write up
@cameronluallen62787 жыл бұрын
So I fixed that problem, but now only my airbag light is on and my seat belt light is on... how do I turn them off?
@cameronluallen62787 жыл бұрын
So I traced the two wires in the seat all the way up to the seatbelt, and cut them at the end of the harness. I had wiring diagrams, but luckily I took a shot and had the same colored wires going to the dash, so I cut those as well. I connected the same color wires together and BOOM! All done! They work perfect and haven't had a problem yet!!
@cameronluallen62787 жыл бұрын
just the driver side fixed it. all i did to the passenger was hook up the power
@cameronluallen62787 жыл бұрын
i believe mine were both white with a different color stripe going down each...one green and one may have been blue.
@cameronluallen62787 жыл бұрын
what truck do you have?
@cameronluallen62787 жыл бұрын
That's it. I mean mine had two of those that were connected to the seat belt, but I connected that with the same color wire coming form the dash.
@jdug14322 жыл бұрын
Isnt the 15s seat heater can bus?
@LifeWithChase2 жыл бұрын
Yep never could get the low heat to work properly. High works good though hooked straight to 12v. It gets pretty warm after 15-20 min then I just turn the switch off. It's a switched power source that way if you forget and leave the switch on. So when I turn the ignition off it kills power to it
@JesusMartinez-lh9eu6 жыл бұрын
What about the srs airbags. Did you disable them or just running them without power?
@LifeWithChase6 жыл бұрын
they were removed
@DD87336 Жыл бұрын
Will seats from 2020 ram 2500 fit in 2002 ram 2500
@LifeWithChase Жыл бұрын
I'm not sure
@gvbbjjhhs7 жыл бұрын
How did connect the seat belts
@Mrgusdude7 жыл бұрын
I need to know this aswell
@gilberthuerta78584 жыл бұрын
Has anyone try putting a 3rd gen dodge bed on a 2nd gen Dodge
@2jojoruiz7 ай бұрын
Wow
@roscoetippetts86197 жыл бұрын
Thanks.
@sel15206 жыл бұрын
How do i make the seat belt bell stop ringing every few seconds!? I already grounded it and same issue, anyone else had the same issue?
@Dirty_dodge5 жыл бұрын
Where did you mount the drivers seat belt to? Passenger bolted back on the deat drivers doesnt have a spot for it
@jessewilliams2719 Жыл бұрын
I am fighting with this right now, did you figure it out?