'98-'02 Dodge Ram DIY Dash Board Replacement

[@betopatino5114]

I’m a do it yourself kind of Guy and when I started looking at your video for a tutorial. I’m baffled of all the work and the back of my mind is like “YOU HAVE GOT TO BE JOKING “. That being said , I have replaced my Dashboard and I just would like to say Thank you. GOD BLESS.

[@JeepinJimmy]

Nice man! Happy to help, thanks for watching!

[@johngregson4030]

Calling it now this will be your most watched video regardless of the rest of your KZbin career 😂

[@BennyChessticles]

Damn it really is 😂

[@JeepinJimmy]

I doubted him at first haha@@BennyChessticles

[@misterj5045]

The fact that nearly every 2nd gen Ram needs a new dashboard almost guarantees his assessment 😂

[@hayleymarie27]

Gregson called it right

[@GrenadeDave]

Here it is 2024 and im referring this video thank you man for your awesome job 👍

[@danielandrews679]

At first, like others, I was thinking “why so much work?” Until it was out, and replaced. Now I have a guide to replace mine. Thank you Sir

[@JeepinJimmy]

You got it! Thanks for watching

[@dzhon5465]

Awesome and detailed step by step video. Congratulations taking the whole dash out by yourself. I definitely will have an assistant when I do mine.

[@JeepinJimmy]

I appreciate it! Help would definitely be good lol

[@philsrvlife]

Probably the best video I’ve seen showing how to remove the dash. Great job!

[@JeepinJimmy]

Thanks!

[@jerryfitz2002]

That is crazy how much work goes into it. I did one on a 98 back when I was like 19 I’m going on 30 this was an awesome refresher. Thank you much my guy

[@JeepinJimmy]

You got it man!

[@stevenboyd7183]

So happy that we have U-Tube. The Repair Manual’s just show you the Basics. With out your Help being a Home Mechanic would be very Frustrating. Bless you for sharing.😊😊😊

[@JeepinJimmy]

Thanks for watching!

[@BiggHoss]

Just a warning for anyone, yellow plugs are airbag plugs, I'd recommend disconnecting the batteries and letting the system sit for 5 to 10 minutes before messing with them.

[@brandonlukasiewicz4785]

Just picked up my first truck, I got a 98’ 1500 2nd gen standard cab so pulling the dash with less room than you had should be a lot of fun! Thanks for the Awesome step by step brother💪🏻

[@JeepinJimmy]

Right on man! You got it man🤙🏼

[@hummingcatfish]

Great video! That Napoleon Dynamite ending was primo 🤌🤣

[@shirleyzook2511]

Yeah I had to laugh out loud at that one🤣

[@greghollinger9370]

I was hoping I never heard that name again... oh well

[@joshuaflowers736]

The editing of this is the quality of an early 2010's tv show. I'm not dogging on you, it's really impressive, especially considering that you put in this much effort for not that many views.

[@JeepinJimmy]

Hey ill take what I can get lol. Thanks!

[@mattywho8485]

Well he's gotten 65,000 views as of late 2023, not too bad !

[@christopherwells4253]

OMG! the fun drinks in the glove box! all I needed to see that I was watching a true truck repair god.

[@martinflaherty7755]

You tube needs to recommend your videos more. Yours are informative, fun and not boring like some. Thanks I am ready to start (I hope), Wish I had you on speed dial, loll

[@JeepinJimmy]

Thank you! Good luck on your endeavor. Feel free to comment if ya snag on anything!

[@martinflaherty7755]

Getting back to you just to be safe. I've been getting a place ready to do the job my shop is full of quads, bikes and other things. Basically been putting this monster off. But, I live in central Oregon outside of Bend and we have been getting some elevation snow and my car doesn't cut it in winters here. Wide tires and no clearance are the wrong receipt. Today started on what I remembered from watching you video, the first time but had to come in then re-watched it. Now to go out and do more. I'm working solo as well. The actual job I am doing is I am replacing my wiring harness. Flooded the truck, should have let it to dry more but started and drove instead. After 3 miles everything was going crazy. Horns blaring, lights flashing, seats moving, my truck was possessed. lololol. started repairing wires but no way too many burnt. What I was wondering if you knew was that I probably do need to take whole dash out right? aient no short cuts here? I'm not a mechanic but can handle lots of things. Just put whole new suspension, about 20 pieces, on my car. It was scary at first but wasn't too bad a job. If i did it again it'd take less than one day. Just lots of ball joints and big bolts. This job though?!?!?!?!? oh Jesus! I should just get another truck right??? JK. Love my truck. Once again I don't know you but I'm using you for info so thx. if you were close, I'd pay for help. Any response? @@JeepinJimmy

[@JeepinJimmy]

I wish you luck man! Taking the whole dash out is probably your best bet. It also makes a ton of other stuff easy to get to. Im in PA unfortunately!

[@shirleyzook2511]

That was an impressive operation! You really do know your stuff. Beautiful job💪👍

[@kevinfox2164]

Bro that took huge bingo's I could never get that back together you did an awesome job you could make a fortune doing side jobs for all of us Dodge Ram 1500 owners.

[@JeepinJimmy]

Thanks dude. I dont want to do this again hahaha

[@frostyjim2633]

That looks hard, I'm glad that the dash on my '99 looks brand new so I don't have to replace it.😀

[@danbusey]

Thanks for taking the time to put this together. Also for the recommendation on the parts source. Takes all the guesswork out of the job.

[@JeepinJimmy]

You got it!

[@dcrtse]

I did this on my '01 Dodge Ram 1500 Sport about three years ago. I also bought the dash from LMC, and the ABS plastic seems to be of much better quality than the OEM. A few things to note. I would definitely recommend a helper when removing the dash. Not so much because it is heavy, but because the remaining plastic is so brittle. The plastic frame where the a/c control panel is at cracked in several different places. I had to use JB weld, wood, old plastic parts, and some ingenuity to keep it all together (thanks, DaimlerChrysler, for making such a crappy dash!). So the helper comes in handy when lifting the dash and not adding extra stress on the already brittle parts. The helper will also help you save your back. Again, the dash isn't all that heavy but trying to pick it up and twisting and turning in such a cramped place could cause you to hurt your back. Save your back, everyone! Other than that, excellent video in that it is short, to the point, and isn't filled with annoying music. P.S. I am going to look into replacing the headliner which I will also be buying from LMC. I wish LMC would make the overhead console for these trucks. The plastic they (DaimlerChrysler ) used on the consoles is also very weak and brittle (Again, thank you DaimlerChrysler!).

[@07blackdog]

My entire lower dash crumbled to pieces when I rocked it back. There are no screws holding temp control, radio, and airbag switch. One screw holding the headlight switch. DRT makes a lower. Great video man.

[@JeepinJimmy]

Dang thats bad! Thanks for watching!

[@gilking6540]

Who is DRT?

[@gilking6540]

Figured it out lol

[@GLHS592]

Great video! I've watched other videos concerning this topic and they are all a little vague while not showing everthing you need to do. Even the LMC Truck video leaves things out. Your description of each step is clear and the video shows exactly what you're talking about. A couple years ago, I was doing a full detail on my garage kept 1998 Ram SS/T and found a crack coming from the bolt hole nearest the passenger side A-pillar. I've never seen one start cracking there. I felt like crying since I've babied my truck since new. The crack isn't terrible yet, but it's getting worse. I guess I will order a panel and do this job this winter. If I can do the plenum plate/gasket repair, this should be a breeze.

[@JeepinJimmy]

Thanks man! Good luck with yours!

[@elcheapo5302]

That was a really great video. Well done. I paid someone to do this for me on my '98 about 10 years ago. The problem is the '98 is a one-year-only instrument bezel and they are no longer available anywhere. You can get 94-97, and 99-01/02, but not '98. The difference lies in the size of the hole for the headlight switch. '98 used the old switch in the new dash so the hole is smaller than the '99-up as those used the new rotary knob headlight switch. The newer bezel would look awful, showing the screws and dash structure. It could be updated to the newer style, but it would require a donor truck--you'd need the dash support, the wiring connector, the bezel, and probably some wiring. I just live with the crack in the bezel. 🤣

[@BLtheP]

Thanks for the video. Used this to replace the dash in my neighbor’s 01 that I do the work on when he wants me to. I didn’t see any pointers for automatics, so I’ll list them here. - chock the wheels before working. The reason being, when you go to lower the steering column, you will move the column around and it will pull the transmission out of park and into any of the other gears. You should also have the parking brake set, but even that won’t really help because once you start moving the dash, the parking brake bar will be tugged and you’ll lose that also. So, chock the wheels before starting. - Move the automatic shifter down into 1st gear before trying to remove the dash trim panel. - don’t forget to disconnect the automatic trans indicator cable from the cluster before dropping the steering column. Other than that I think all of the manual trans details apply, other than the airbag module being easier to remove in the autos because it’s just a simple 2 screw cover over it whereas it’s the whole Shifter trim assembly on manuals. Not a bad job but my neighbor’s truck had an aftermarket remote start and alarm hard-spliced to both the dash harness and the engine harness, so I had to do cutting to get the dash back out and resplicing to get everything working again. That was a major pain. Also, the neighbor has a pretty elaborate amp and speaker setup and so I had lots of added speaker and RCA cabling tethered to the dash as well that had to be pulled out of the way. I probably could have done this job in half the time with a lot less frustration had the truck still been stock.

[@peterbarczikay]

Thank you for the video, great job, and that Napoleon Dynamite reference at the end was epic.

[@JeepinJimmy]

Thanks man haha

[@dsmoll91]

I followed this very closely, but I was able to get all my screws in and out without removing the dash from the truck. If you’re handy and patient you can do it with a mirror and a well fitting Phillips bit

[@JeepinJimmy]

Dang man that's impressive!

[@that.burgundy.2g]

replaced the dash in my 2nd gen today and just followed along with this video! great video and helped tons!!!

[@JeepinJimmy]

Right on! Glad it helped!

[@martygriffith2135]

How long did it take you to do and were there any significant problems that you encountered?

[@mattywho8485]

@@martygriffith2135 It took him 13 minutes !

[@brutalbliss]

Thanks for this! Excellent & efficient Video without a bunch of babble. Well done!

[@JeepinJimmy]

I appreciate it!

[@williamhsteele]

Awesome channel man! This vid will be helpful. My LMC dash just came in for my 01. Hopefully replacing it this weekend if we don’t get more storms in Cecil/Lancaster county again and I get called into work.

[@JeepinJimmy]

Right on man! Thanks!

[@Bdady74]

Best video so far on these dashes. Thanks Brother!

[@JeepinJimmy]

I appreciate that, thanks!

[@whitzach]

I took mine out last year, i took the windshield out and loosen the kick panels bolts and rotated the dash back about 6" then i could get to the vent screws, i pulled the column as you did as well,just thought i would share.

[@JeepinJimmy]

Right on! I dont think id be able to get the windshield back in once i had it out though haha

[@alexduvelius5975]

This was suggested after I watched the LMC video on how to do the same thing. This was far better. 🙌

[@JeepinJimmy]

Dang, that means a lot! Thanks!

[@ChrisWard64658]

Great tips and info. Thanks.

[@KrhymeFox]

Loved the napoleon dynamite reference. Great video.

[@JeepinJimmy]

Haha thanks man!

[@bugtussell1]

Used your video to pull a good dash. Went well thanks. I definitely would not attempt to pull it with out help or install a good one with out help

[@JeepinJimmy]

Thanks! How did you find a good dash lol

[@davesogn3329]

great job is it pretty much the same on 96 model also

[@JeepinJimmy]

Thanks! Honestly I couldn’t tell ya but I’d imagine it is somewhat the same

[@lilkeifer06]

Excellent job ! Got a 2001 and 2002 I have to do soon. I’m going to go ahead and do the blend door USA upgrades when it’s all out.

[@JeepinJimmy]

Right on! Thanks!

[@martygriffith2135]

What do you mean? Is there something that typically goes wrong with them?

[@martygriffith2135]

What do you mean? Is there something that typically goes wrong with them?

[@lilkeifer06]

Sorry so late replying. Blenddoor USA replaces all the doors that are plastic with aluminum doors that have better sealing foam on them. The kit also includes an aluminum driver for the blend door. I put this kit on my dodge when heater core went out and it was worth every penny! Also they give you new foam seals for the everything!

[@josemena7644]

Loved it!! Great job on the details and overall content.🙏🏼

[@JeepinJimmy]

I appreciate it! Thanks for watching

[@Xodontia]

This is the Cliffnotes of 2nd gen dash removal, make sure this video remains long after your death. Future generations are counting on you!

[@JeepinJimmy]

Thanks man😂

[@Xodontia]

@@JeepinJimmy well executed, thank you!

[@jamiebaker3730]

The three mini bottles in the glove box 😂

[@andres.tortas7062]

What a great video man, it was filmed so well, definitely deserves more subscribers

[@JeepinJimmy]

I appreciate it man!

[@haydenwieland6603]

Great video! Explained and showed everything.

[@JeepinJimmy]

Thanks man!

[@chadkirk150]

Went through all my stages of grief in five minutes of this video. I think I'm just going to accept the cracked dash. Ain't no way I'm doing all of that bs.

[@hey_youtubeim_back2159]

It really ain't that bad. It's all nuts and bolts. At least that's what I tell myself

[@ffhjvbuydb78eb]

Plot twist: this wasn't for an instructional video, dude just wanted to show off his cool as hell H1 @7:07!

[@JeepinJimmy]

Lol thanks man! Ive been scheming to get it in a video

[@prototype9904]

You've convinced me that if I ever need to do this, I'm going to convince myself not to ~ ;p

[@misterphuzz]

I just received my new dash and instrument bezel. Going to be installing it in the next few days. The dash was already in bad condition, but when I had to replace the heater core, the whole damn thing fell apart like stale egg shells.

[@JeepinJimmy]

Right on, good luck!

[@jesuszuniga2397]

My heater radiator went out, just bypassed it since I live in Arizona. My dash is also long gone.

[@danphenicie2992]

at 7:30, a craftsman cotter pin extractor 4319 works well to release the connectors

[@JeepinJimmy]

Thats a good idea right there!

[@irishammer319]

tearing it apart is fun way to learn thanku brother

[@JeepinJimmy]

You got it man

[@DMACHOLMAN]

Where was your video when I needed it most ? But when I got it done my dash was very crunchy I don't know if I would have been able to get it out and lay it on sawhorses Great job!

[@JeepinJimmy]

Thank you!

[@JB-mf1zc]

That's a lot to remember!! Very good!! Thanks for sharing!!

[@JeepinJimmy]

You bet, thanks!

[@HooverTuber]

Great video and pretty much confirms how much a pia it is to swap out the dash. I’ll probably just go with the hard molded cover that they sell, seems like a way easier install than an actual dash replacement.

[@JeepinJimmy]

Not a bad option! This is definitely a lot of work!

[@jeanguillaume4589]

Who makes that hard molded cover?

[@scotthurley4967]

Awesome job. Was thinking about doing mine, but after seeing what's all involved. I just don't know. Didn't have a clue as to how much has to be taken off.

[@JeepinJimmy]

Thanks!

[@Albertacoalroller]

Brother thank you, I am awaiting on my k9 dash to come in on the 9th.. definitely getting a new heater core. Also some dingle chopped out my ac so going to re install that.

[@JeepinJimmy]

You got it man! Thanks for watching

[@richardbates2367]

My 2000 dodge ram laramie slt quad cab long bed 1500 black with most of the white pinstripe 4x4,has a dash skinz dash cap already on the truck when I acquired it, and the glovebox light/switch goes in a like square tap off the bottom of the top dash assembly that is snapped off the glovebox light/switch just hangs inside the glovebox..

[@blaytinlake5381]

Man what did you do with the vin

[@JeepinJimmy]

What you mean?

[@billyburns4390]

Will you come to Texas and change mine?

[@JeepinJimmy]

All expenses paid vacation?😂 sure

[@Spydr6684]

That came out so nice. Need to do the same with my ‘99.

[@martygriffith2135]

Me too and same year. I have already replaced the engine, transmission, and transfer case, rebuilt entire front end, flushed both diffs, new speakers and tint. Just waiting to do the dash and touch up a couple small rust spots. Truck still looks like new now but I want it completely restored

[@barbarapumphrey]

very impressive and amazingly informative; wish I didn't need a heater core replacement that might cost $l,000 to be replaced.

[@JeepinJimmy]

Thanks! The heater core itself is no more than $100 so if you can handle what I did in the video you could save a ton of money!

[@germpa1]

Great information on how its done. How many actual hours did it take? It would be great to know for planning purposes. Appreciate you taking the time to do this.

[@JeepinJimmy]

Thank you! Its been a little while haha but I would plan on a full day 8-10 hours.

[@troysherman-t7p]

@@JeepinJimmywhere are u located?

[@jacobclark89]

Air bag module, I was wondering what that thing was 😅 did you have to disconnect the AC condenser,,?

[@JeepinJimmy]

AC condenser can stay connected!

[@jacobclark89]

@JeepinJimmy thanks 👍

[@TheJudgeWm]

Nice! I have been wondering if those replacement dashes fit. Thanks.

[@JeepinJimmy]

Thanks for watching!

[@GrenadeDave]

I feel like you called me out about that heater core tho lmao 🤣 just got this truck and watched your video cuz the heater is broken and the dash is in shambles lol its like you read my mind o.O

[@bigdawg8016]

Question how u put back the vin plate also passenger air bag how u coconwct de pin they diferent color?

[@evanbell3238]

Wow I know I'm not done and only 3/4 through the video but I hope you changed the heater core while in there as well.

[@AmmonHaffly]

Hello Sir. I have a question for You. Where is your VIN plate mounted, mine is mounted to the dash cover. How do I remount it?

[@donsaxon1948]

I just removed my entire dash permanently from my 99 Dodge 3500 van..I was surprised to find that the vin tag is attached to the plastic trim and not the steel..I'm building a military looking slantback veteran of a thousand psychic wars vehicle...question I have is I want to do away with the original gauge cluster..there are 2 plugs on the back of it and I need to make it run with those unplugged and for the alternator to charge..which wires can I connect to make this work..I will be adding aftermarket gauges into the center of my new flat dash plate.

[@-Anzul-]

Great Vid! Loved the Napoleon Dynamite reference!

[@JeepinJimmy]

Haha thanks! Glad someone noticed

[@raymondpetracca6208]

Incredible, it’s something I could NEVER DO! Nice job 👍😊

[@JeepinJimmy]

Thanks!!

[@supersidecar8901]

Great video... excellent. Replace the heater core if the milage is anything over 250,000. You'll avoid a 2nd dash removal. Work smart. . Work once.

[@JeepinJimmy]

I appreciate it! This truck has 200k on it so hopefully some life still left!

[@kevingore3588]

need to replace one on 02 dodge ram 1500 slt hope it as easy as you make it look

[@JeepinJimmy]

Good luck man!

[@jaimecisneros3738]

Buen trabajo amigo 👍 good job brother 👍

[@ThatDudeFlex1]

Where you get your parts from? It looks like it all fit in well. I don't trust a lot of these places with their 3D printing garbage. Being even an 1/8th of an inch out of spec can make it tough getting a good fit. If you share would be greatly appreciated. Also Liked and Subscribed

[@JeepinJimmy]

I got everything from LMC Truck. Seems like good quality! Thanks for watching!

[@robertryan2222]

What do you think a body shop would charge to replace the dash cover? This is just a little too much for me to attempt.

[@ChristmasMorning1995]

Crazy how the Dakotas and Durangos of the era don’t have the cracking dash issue. I think I heard a different company made the dashboards in those/ supplied the plastic.

[@gofast4127]

Awesome video man thanks, love my 2nd gen Cummins definitely need to do this I just threw a plastic dash cover on for now…

[@JeepinJimmy]

You bet man thanks!

[@mikeb792]

Great video, sir! Love your channel and just subbed. Quick question... Do you need to remove the entire dash if the windshield is out? Does it make it easier with the windshield out at all? I ask because I need to do both very soon. 👍

[@JeepinJimmy]

Thanks man! Actually no, I dont think you would have to. The only reason to pull out the entire dash is to get at the bolts facing front so you might be good!

[@mikeb792]

@@JeepinJimmy Thanks 👍

[@jayjernigan7989]

What have I missed I exchanged everything and when I put back my blower doesn’t run

[@mikeybobw6581]

Good time to fix ANY heat or air issues! Great video!

[@crowshooter223]

How many hours total did this job take you?

[@JeepinJimmy]

I got this done in a day, while filming. I'd say its about 8 hours if you knock it out straight through!

[@haralsonstuff6983]

what a great informative video. Thanks Jimmy!

[@JeepinJimmy]

Glad it was helpful, thanks for watching!

[@barbarapumphrey]

I am so confused watching you--man, you are good

[@Lloyd33]

I have a medium size crack across the top of the dash in my '01 Ram 2500. I was considering replacing it. After watching this video, I have decided there is no way in !@#$ that I'm replacing it by myself!! 😝 Awesome video though!! You got a like & subscribe from me, Jeepin Jimmy!

[@JeepinJimmy]

haha right on. Thanks man!

[@aronp713]

Just bought a 2001 1500 the dash is completely rotten! Just saw your detailed video. I wasn’t planing to remove the entire dash to replace the top part but do you say it’s best to , all those wires look confusing lol just don’t want to ruin it 😂

[@JeepinJimmy]

Congrats on the truck! If you do just the cover, you will not be able to get access to the screws holding the defrost vent to the dash. But one good thing is all the wires have different plugs so nothing would get plugged into the wrong place if you did decide to pull the whole thing out!

[@gerardogonzalez7006]

The previous owner changed the board for my ram but now it doesn't have the VIN. Could it be that it stayed on the old board?

[@JeepinJimmy]

That could be the case! I didnt realize the vin was attached when I junked mine so now this truck does not have the vin tag on the dash.

[@dougblack4479]

Aliexpress makes a custom made dash cover with just a little fuzz for a custom look. It's only about 20 bucks. You can reinforce the top of the dash with good old duct tape before you do the lay over

[@juiceandsoda]

I have some questions i just bought a 01 with 80xxx on it the dash tho is just as bad or worse as far as cracking it seems the plastics that the instruments connect to are also broke is that replaced aswell with the new covers

[@JeepinJimmy]

Oh dang! Im not sure if LMC has that or not!

[@carlirvine9164]

Nice work on your dashboard. How much Did that cost you?

[@JeepinJimmy]

About $450 in parts

[@TravisCutburth]

I have a 97 Dakota and need to take off the dash to fix the AC but my dad said it’ll crack what side did you get your replacement from?

[@JamesCox-t5k]

Used this video to replace the dash in my sons 99 dodge ram. The install went well, but now we’re having problems shifting the transmission. Any advice?

[@JeepinJimmy]

Right on! Automatic?

[@gunsandhorsepower]

Does the dash cubby remove where the cup Holder go on the autos

[@brapptv44]

thanks david stacy

[@JeepinJimmy]

Thank you?😂

[@brapptv44]

@@JeepinJimmy reminded me of his show a little bit 😂🤦‍♂️

[@kr5289]

Why did you need to remove the entire dash? I've watched other videos, and they replaced the dash pad without removing the entire dash.

[@edgarespinoza3868]

Really appreciate the video!! Gave me confidence to do it myself now💯

[@JeepinJimmy]

Right on! Happy to help!

[@jb5731]

Hey, is that a wheat penny? Sounds familiar.

[@stefanbouchard1235]

Men o Men great video. Have allot of courage. Need to do the same to my old 96er ram . I need to bight the bullet and just do it. How long does it take to replace that? regardless great video.

[@JeepinJimmy]

Thanks! This could be done in a long day

[@stefanbouchard1235]

@@JeepinJimmy I'm going to do it tomorrow have all the parts and for me it will be a very long day lol.

[@digitalgavakie]

I need to do my dash. Im debating between a skin and a new pad. Mainly because the dash where the bezel clips is all sorts of broken. Would this solve for that? Maybe more intimidating than it should be.

[@JeepinJimmy]

This would solve that, it also comes with new metal retainers. I think it was worth it even though there is a bit more work involved!

[@taradewees4206]

how did you change your manual shifter knob? i have a 99 ram 3500 and my shifter knob is lop sided.

[@JeepinJimmy]

If you pop off the cap with the shift pattern on it there is a nut under there

[@mattywho8485]

They all are ! But after a few years of shifting, it comes back to top dead center.

[@longboardalways]

Dude this video is epic. REALLY don’t want to fix my dash now hahaha

[@JeepinJimmy]

Thanks man. It would be a lot easier with a second set of hands!

[@longboardalways]

@@JeepinJimmy unfortunately I was only born with a third leg. No extra hands 😒

[@ffhjvbuydb78eb]

This is actually way more intimidating than what I thought 😅

[@longboardalways]

@@ffhjvbuydb78eb I walked back out to my truck and saw my messed up dash and thought “eh it’s not so bad”

[@JeepinJimmy]

@@ffhjvbuydb78eb definitely a project😂

[@JohnDoe-kp3sw]

So what you are saying is that really the truck is built around the dashboard

[@robertwhite1131]

Wow!! Very impressive my man!! Great video!!

[@JeepinJimmy]

Thanks man!

[@morganhay859]

Anyone know what the plug at 2:50 is for mine doesn’t have anything plugged in

[@JeepinJimmy]

Just looked. Not sure what its for, but it feeds into a bigger loom that goes into the side fuse panel