14 күн бұрын
8 ай бұрын
11 ай бұрын
Пікірлер
@bdo9114 Күн бұрын
That really dont run that bad, sounds good!!
@zayin123 Күн бұрын
Excellent troubleshooting.
@johnscrazycurbs6752 4 күн бұрын
THESE TRUCKS ARE FRICKEN JUNK!! OUT OF 2 YEARS OF OWNING IT IT HAS RAN MAYBE 6 MONTHS . FUEL SYSTEM HAS ABOUT 18 O RINGS THAT CONSTANTLY NEED RPLACED. ONCE YOU FIX ONE LEAK ANOTHER ONE POPS UP . LIKE OTHERS I HAVE REPLACED EVERY SENSOR 3X'S AT LEAST AS WELL AS EVERY ORING . THE INJECTORS ARE SO EXPENSIVE MOST OF US CANT AFFORD NEW ONES SO WE TRY AND FIX THE OLD ONES . WHAT A NIGHT MARE. .004 .005 .003 .002 ON AND ON WITH DIFFERENT SHIM SPACING VALUES. SPECIAL ORDER LOC TITE IS REQUIRED ON SOME FASETENERS AND NOT OTHERS. CHINESE PARTS ARE AFFORDABLE BUT USUALLY DONT WORK. YOUR TALKING $40 VS WITCHCRAFT I MEAN MOTORCRAFT $800 FOR WHAT LOOKS LIKE THE EXACT SAME PART. THERE ARE CERTAIN PROCEDOURES THAT HAVE TO BE FOLLOWED EXACTLY OR WONT WORK . i HAVE SPENT OVER $500 IN ORINGS CUS EVERY TIME YOU REMOVE INJECTOR YOU HAVE TO REPLACE WITH NEW FORD ORINGS OR THEY WONT WORK . SUCH A PIECE OF CRAP! MY DODGE CUMMINS RARELY BROKE DOWN ON ME AND WHEN I DID I WAS ABLE TO FIX IT MY SELF QUICKLY AND VERY AFFORDABLE DO TO SO. i EVEN REBUILT MY NV4500 TRANSMISSION WITH EASE AND WAS ACTUALLY FUN. I AM SELF EMPLOYED OR AT LEAST WAS SELF EMPLOYED AS I NEED MY TRUCK TO GO TO WORK AND HAVE JUST ABOUT LOST ALL MY REGUALR CUSTOMERS BECAUSE OF THIS FRICKEN POS TRUCK! I WILL NEVER BY FORD EVER AGAIN . OVER 5K SPENT AND TRUCK STILL NOT RUYNNING. i OWE FINANCE COMPANY ONLY A FEW THOUSAND AND THEY WANT ME TO SURRENDER THE TRUCK TO THEM. AT THIS POINT THIS MIGHT BE THE CHEAPEST WAT TO FIX THIS TRUCK! F*CK FORD! TRUST ME STEER CLEAR OF THESE TRUCKS THEY ARE WORTHLESS MONEY PITS . BUY DODGE CUMMINS STRAIGHT SIMPLE 6 CYLINDER MOTOR THAT HAS WAY MORE POWER AND WONT BREAK DOWN ON YOU ONCE A MONTH . IF YOU DO BUY FORD MAKE SURE YOU HAVE AAA. I DONT EVEN KNOW HOW MUCH I HAVE SPENT ON TOW TRUCKS BUY IT IS ALOT !
@herringtonfarms6816 4 күн бұрын
My doors have went up 20’x14’ color over $4,000.00 since I built my shop in 2020
@BlakeFreeman10 6 күн бұрын
My 2031 KW t880 rotator has air assisted - Trying to figure out how to adjust it. Was told to pump it to adjust it. I’ve been doing that but it’s not adjusting. Anyone know how to adjust air assisted KW
@deviatehatter8306 7 күн бұрын
THANK YOU!!
@FilterYT 8 күн бұрын
That was great, thanks.
@Buggastar277 9 күн бұрын
Everyones level of patience is so much better than mine lol. This is the 4th one ive watched this morning and no yelling or anything i have going on in my driveway right now
@robertgil1420 11 күн бұрын
What year is that truck
@LifeWithChase 11 күн бұрын
2006
@shaunsouthern7931 12 күн бұрын
Do you know what fuse is for the fuel pump please?
@LifeWithChase 12 күн бұрын
No idea, that was a long time ago and it was not my tractor.
@shaunsouthern7931 11 күн бұрын
@@LifeWithChase just for the record on my 5215 fuse is bottom left 15amp . Thanks for your video helped big time.
@jplay3096 12 күн бұрын
You just saved my ass.
@bdo9114 13 күн бұрын
HOWS the trans holding up in 18 wheeler ?
@LifeWithChase 13 күн бұрын
So far so good 👍
@MichaelCzajka 14 күн бұрын
I've been wondering what happens with longer oil change intervals. Lots of people say it's a bad idea... but nobody ever measures what happens. Congratulations , Chase, on doing a test to measure the effects. Seems that most manufacturer suggested oil change intervals aren't all that unreasonable even if they appear a bit long? :-)
@LifeWithChase 13 күн бұрын
I was curious also and couldn't find any videos of anyone testing it
@MichaelCzajka 13 күн бұрын
One thing I notice is that the wear is not averaged over the distance travelled e.g ppm/1000 km which may mislead you into thinking that wear has increased when it hasn't (total wear is up but averaged wear is not). The idea is to figure out at what stage the wear starts to accelerate if the oil is not changed... and make sure you change the oil before that happens.
@MichaelCzajka 13 күн бұрын
Wear analysis is the best way to identify which oils and additives work. The proof is often compelling. ...but very few people run enough analyses to figure out what works and what doesn't e.g. Synthetic oils are much better than miineral oils... with semi-synthetic being a good second best. :-)
@MichaelCzajka 13 күн бұрын
Adding zinc to oil can actually increase wear if you add too much. Most additives do very little to reduce wear... but you'll never notice unless you do a before and after test. Ideally what you want in an additive is something that only needs a single application... and results in a 50~90% wear reduction. :-)
@riskydabs3710 14 күн бұрын
Damn this video is a life saver the simple knowledge of knowing the regulators are the same thread between Acetylene and propane is good knowledge I just started getting into brazing I have smaller propane bottles that I fill with my 20lb tank but knowing I can use a Oxy Acetylene setup for propane and just switch tips and upgrading to T rated hoses
@LifeWithChase 13 күн бұрын
I'm not sure you can braze with propane because you can't use a brazing tip with propane I don't believe. I don't braze so it works great for me for cutting and heating. It does use more oxygen than with acetylene but uses very little propane.
@zayin123 15 күн бұрын
Is the Ranger project complete?
@LifeWithChase 14 күн бұрын
Nope, I got it where I could move it out of the way under it's own power though.
@zayin123 14 күн бұрын
@@LifeWithChase Progress, nice.
@steveramos1452 15 күн бұрын
That older rating prolly has tons of zinc/phosphorus. Ash galore good for non dpf trucks
@user-ue1iv1vd5r 15 күн бұрын
Mine has a key way in the top bushing the bushing looks good but it’s tighter than tight coming out. I’m worried I’m tearing up something but it’s gotta come out. I couldn’t see any key ways on yours. Mine is a 6610 Just keep hammering driving spindle down out the bottom??
@LifeWithChase 15 күн бұрын
Sorry this has been a while ago and I really don't remember what All I did but I remember it being a pain in the rear!
@happyhusker1163 16 күн бұрын
It's actually an 1/8 of an inch towards the crown when I worked at a trailer repair shop when I did alignments. I'm trying to align my camper and looking for ideas if you have any.
@robp9696 16 күн бұрын
My 3/4 Earth Quake from Harbor Freight may be a bit stronger than that particular impact. As some has suggested, maybe something is wrong with the impact or battery. I know my Earth Quake is stronger with certain batteries. Great video, though. I think it would be a great idea to have one in the side box of the truck.
@LifeWithChase 16 күн бұрын
I switched to Milwaukee and it works much better but I think DeWalt makes one better now also.
@user-do1fq8oy9c 18 күн бұрын
Mine has been leaking 2 gal per oil change for a few years now
@jeremysowder6644 20 күн бұрын
Thanks for making this video I have been dealing with the same issue for a week now this helped me. I had the same issue the o ring gone on my spool too
@LifeWithChase 20 күн бұрын
Must be common on these, few other comments said they had same issue. I couldn't find any info on it when I searched, and I scratched my head for a while figuring it out 🤣
@bill45colt 23 күн бұрын
starting a video by asking a question to people who cant reply??? what sort of response do you expect??
@LifeWithChase 23 күн бұрын
Why can't they reply? Looks like you figured out how. 🤔
@theseldomseenkid6251 23 күн бұрын
I put the outdoor cats on a feeding schedule. Put fresh food and water out at first light. Keep it out all day, remove a few hours after dusk before the coons show up. The cats have figured out the schedule and the coons don't seem to be around as much.
@robertl.180 26 күн бұрын
good job !
@xyndijade2864 28 күн бұрын
Wow! I have that tool, and I've done several of these over the years but I have never seen them come out like this! Maybe it's where I live? But for me, I've even had to burn them out before. I wished I was so lucky lol
@2jzgenat 28 күн бұрын
how do those hoses handle the amount of psi from the ac system
@slow6.7 28 күн бұрын
what monitor is that for your temps? looking for a simple small one like this and all ones i find are around $450
@lonnieblackwell9215 29 күн бұрын
That will make you a cool little truck to bang around in. The easiest way that I have found to check the toe in is to put a piece of tape on each tire in the same spot and mark it. Then measure that and roll the truck forward to bring the tape to the front and measure that. Then just see the difference of the measurements and you have your toe in or out. Good luck with it.
@maximeulysse5805 Ай бұрын
Man i really appreciate this video,wow! That was a good one.
@LifeWithChase Ай бұрын
More fun times in trucking 😂
@williew2131 Ай бұрын
great video thans for sharing
@jsphburk Ай бұрын
Only need one plate? Not two?
@SootyMangabey. Ай бұрын
My first vehicle was a single cab Ranger reliable as all hell but good god was it scary on wet roads. Let an ex friend of mine drive it and he lost control trying to fool around and we slammed into a tree going about 30. You could take a full step into where the hood used to be. Had a riding mower in the bed that came a couple feet up into the cab. That little 3.0 was still running too, after collecting myself I had to walk back and turn it off. A scrapper got it and I believe the motor actually went into another Ranger.
@LifeWithChase Ай бұрын
I had a few old rangers in my teen's.
@hondamx_8813 Ай бұрын
07 2500 is only rated for 12,000lbs on a 2wd 😂 I would say tranny was hot @ 20,000lbs.
@LifeWithChase Ай бұрын
The 6speed manual trucks weren't rated any higher but would do it with ease. Dodge was a little behind the times on their auto transmissions
@GlynRobinson Ай бұрын
Man. I hate you had to deal with all that.
@LifeWithChase Ай бұрын
fun times!
@bdo9114 Ай бұрын
35K NON TURBO SIDE BY SIDE ,Eric O from south main auto did kinda of the same thing, bought a wk1 jeep uses that for the farm and trails ,
@LifeWithChase Ай бұрын
Cool, yeah the cab sxs is so big and expensive you might as well buy a truck.
@Motorizeify Ай бұрын
Cool little project.
@RaymondSabouni Ай бұрын
I got this Heather almost 2 years ago but since day one never works right you never can count on it to work its worse machine I ever bought don't waste your money and time.
@stephenparchewski1998 Ай бұрын
Good video. I set my 2864 up through the one key app. I set it up for 550, 950, 1350, and 1750 RPM and disabled that bolt removal mode completely. I find the bolt removal mode pointless when you have a variable speed trigger. Great tool, but I don’t like the factory settings.
@someguy4476 Ай бұрын
Love his face using that grinder. LOL! 😂
@RufusMitchell-vb8cg Ай бұрын
Thanks Sir..... this is what I need to do for my D3C-Series II
@DavidSanchez-vo5hk Ай бұрын
What’s the part number for the eyebolt?
@Mike-su8si Ай бұрын
Would epoxy work
@Mike-su8si Ай бұрын
Mine is a Kohler command twin cylinder 22 i think can't remember
@Mike-su8si Ай бұрын
My friend bought a new flywheel as he said but i think he might have repainted it and lied but he's dumb enough to blow money like that so he might have anyhow i think he fucked something up in it under the flywheel or didn't do something right
@Mike-su8si Ай бұрын
Think on the rectifier the middle pin is the red i marked mine before on one of those mowers out there few years back
@jeremyeubanks2387 Ай бұрын
you have never been to the eye dr and got metal cut of your eyes ? btw good way to yank that sucker out
@justascott Ай бұрын
Mine leaves a puddle each time I start it. Passenger side. Could this be the culprit, or should I look at replacing the reservoir?
@martinbadrov5542 Ай бұрын
Appreciate you making this video! I have airtek on my RV. Had no idea how to tackle the job. Thanks for getting me through it!
@MrDetroit60 Ай бұрын
The best video for owner ops. Thanks
@JoeFloes Ай бұрын
Im looking for a 10 mile an hour john deer riding lawnmower