DOES SIZE MATTER? | ELECTRIC FAN TOO SMALL | DODGE TRUCK FAN CONVERSION

[@jamesparks1966]

Late to the party but thanks bro

[@codygregory1530]

that rad setup is totally rad bro thanks for the totally rad video!! :D

[@Foche_T._Schitt]

FYI those washable KN type air filters don't filter as much as the stock filter and the stock filter was designed to flow enough air when it's dirty. If it was a turbo or supercharged engine the bearings would be getting ate up. Secondly the air box also pulled air from the fender cavity, not the hot engine bay. I dont know what value you put on your time but my time is better spent replacing the OE filter than washing a KN

[@joerivas9847]

Big issue , is no shroud on that fan for one, the other looks way to small.

[@muratyuksel7982]

Hello, can you please tell me which vehicle's fan system you used for the Dodge Dakota?

[@jlast313]

Definitely interested in what the model number of that fan is!

[@BoostedMotorsports]

I have one more I can sell if interested

[@jlast313]

@@BoostedMotorsports oh really now? How much?

[@BoostedMotorsports]

Make me an offer? $100 🤷‍♂️

[@jlast313]

@@BoostedMotorsports damn, that's tempting, I wish I hadn't purchased the exact set up in your electric fan video, granted I have a 4.7.

[@MotoGamingDad]

Knowing the fan would be great, I followed your previous videos and installed the Amazon fan. Does fine cruising around town but mines a 5.9l magnum dakota slt 4x4 that also sees some wheeling/mudding. It cannot keep up cooling under those conditions. Need more fan power. Still currently have the old fan shroud with the coolant res and windshield guild built into it.

[@jameskechter9682]

John, working on my sons ‘99 Dakota and I’m converting it over to electric fan. Do you still recommend the black horse fan? I know you swapped in a later video but we don’t live in Texas so over 100 degrees is more the exception than the rule.

[@Kilnor]

Right on! Great video bro.

[@r-shot8431]

This was a nice upgrage.... it did the trick. I am sure if you use 8ga wire or even a 10ga wire and fuse holder that should do it. NICE Job!!

[@BoostedMotorsports]

R- SHOT Racing thanks man! I have a more heavy duty fan controller and relay showing up today. The relay and fuses on the hayden controller we’re getting too hot for my Liking

[@nickdoescher9957]

I would like to know the part number to that fan

[@dsa9037]

Waiting for the part number 😂

[@randomvoid5232]

That's a good idea. It looks nice and most importantly, it does the job. Great job with the Dakota.

[@triple_j5252]

Love the patriotic garage. Red white and blue Mopars! Merica!!

[@shadow105720]

There is a factory option for heavy duty cooling that has a clutch fan and an electric. You might be able to find one for a 5.9 out of a 4x4 or durango that has a towing package, heavy cooling is included in towing.

[@shadow105720]

I think all the V8s got the bigger radiator but you might want to double check that too. It's also included in the cooling or tow packs.

[@dannybuff3743]

I like the new fan. I wonder how good it will cool with AC.

[@chrisg2619]

Love that cam set up . I have a 03 r/t I would love to drop that set up in can you give me the specs and what not on what you ?

[@BoostedMotorsports]

Yes call Brian at IMM ENGINES he can set you up with the exact same setup 760-347-5493

[@navidaddy5508]

Jon, what size is the new fan? I still have the stock fan and can't stand the noise. Gonna do the swap this week and want this size. If u remember the vehicle it came from, inform me on that as well. I'd appreciate it more than u know. Especially since I'm in FL, so u know it's hot as hell here! Exhaust is next after I locate scatpack or hellcat mufflers to go with the headers. Decided not to use the 3in magnaflos I have b/c I love the tone of the scats/hellcats on yours. Thanks in advance.

[@BoostedMotorsports]

Hey I have a few extra fans if you want the same one. If you want one I can do $100 and you cover the shipping and it’s yours! Let me know if you’re interested! [e-mail]

[@navidaddy5508]

@@BoostedMotorsports Hey Jon, I've been out of town due to the death of my grandmother and just saw your reply about the fan. That sounds awesome and I should be home no later than the first part of next week and I'll contact you then. If I'm gonna need anything else, if u don't mind, just email me a short list I'd appreciate it. I'll contact you as soon as I'm back home. Thanks in advance.

[@vybeez2447]

@@BoostedMotorsportsdo you have another fan to sell ?

[@erinralston]

I have a 5.9 durango we've been buying the parts slowly to do this to. One thing I've been told is the Hayden controllers are junk and even when installed correctly can cost you at least a head gasket

[@dannybuff3743]

I like the new fan. I wonder how it will cool with AC.

[@MM_in_Havasu]

Is the fan wired in with a relay? If not, then that would be advisable. Cool job!

[@BoostedMotorsports]

It is! We used the hayden fan controller kit but the gauge wiring and fuses aren't too beefy. I have a more heavy duty kit showing up today that has beefier wiring, relay and fuse.

[@joeygonzalez1866]

Do you still have that 2nd fan?

[@BoostedMotorsports]

Yes

[@mikea.762]

@@BoostedMotorsports how about now? or a clue where i can get it?

[@Jwachter146]

I'm curious How this setup is doing still? did the controller hold up? You never mention what the fan came from Id like to get the exact same one if possible!

[@TheFlR3StOrM]

Hi John, I have to agree with leakyjeep. That foam tape will let loose when it heats up, speaking from experience. I have tried that foam tape and over time when it gets hot it let's loose. I was thinking while watching, don't throw the curved edge away that you cut off of the shroud. Do some measuring and cut a little more off the shroud and then plastic weld the curved end back on so you will get like a factory seal on the shroud. If you have never welded plastic together here is a great video of it being done and it's ends up as strong as if it was never cut or broken. kzbin.info/www/bejne/a6C4Yq13msuCZ6c Nice looking set up though as far as a fan shroud from a different vehicle. Good luck brother

[@leakyjeep5.9]

My foam got sucked in the first time I fired it up. Almost broke the fan.

[@TejasToolMan]

That should work fine if not go with a brushless fan motor setup. Is the rad new/clean?

[@cameronb234]

Do you have a video on the vacuum routing?

[@beef9c1]

Jon, if the temps still stay higher than normal, may I suggest a radiator with more rows (3 row core type). I see that your factory radiator is somewhat thin or not sufficient to your needs.

[@rtxrt73]

AC, ,🤣🤣 we don't need you passing out from heat stroke if you get the S2000 sold

[@BoostedMotorsports]

I’m gonna be sweatin if the s2000 sells! Free sauna 🤣

[@rtxrt73]

@@BoostedMotorsports 🤣🤣🤣 yeah I would hook up the AC again.. you can just sit in the garage with the doors closed for the free sauna experience 😝😝

[@billcat1840]

I put my probe close to the inlet of the radiator up at the neck..and I run a shroud.

[@dspady01]

LOOKS GOOD. TOO BAD YOU DIDN’T BOTHER TO FIGURE OUT WHAT THE FAN CAME FROM…. LITERALLY THOUSANDS OF POSSIBILITIES OUT THERE. DEFINITELY UPGRADE THE WIRING BEFORE IT MELTS AND SHORTS OUT….

[@joserendon4060]

Hello.... was wondering if you can do all the upgrades you did to the suspension of your Dakota to my Dakota? Where are you located?

[@davidledford6482]

i would cool the duster off between rounds,an it liked leavin line at about 165 or so, never 180,it would throw it off slightly, i left the line at about 1800 or 2000 hard to remember,but used a roadrunner converter about 2200 stall, an drove same car to tennessee an everywhere with 3.55 gear an bracket raced too,an took tracks money on occasion,in bracket racing you gotta do exact same thing about everytime,an pick on new punk ass kids in mustangs an rubbish as that,that have no clue to cut a light etc...mopar or no car,had about 4 ...500.000 an 501.000 lights long ago,an thats a little close but pretty unbeatable...

[@Blaydrnnnr]

I know this is an older vid now, but wanted to ask...I am doing a 2 fan electric install on my 2001 2wd Ram in a few weeks, and was wondering where you tapped into for your switched power?

[@louindorato6855]

You should blackout your tail lights. The red just doesn't work with the blue.

[@ronaldmoparornocar9590]

Go to 8-10 gauge wire and should be fine that foam is going to get sucked in by the fan at some point I would use some grace Iceland water shield it's rubber roof stuff you put down on a roof super sticky and you can deal the side Right to the aluminum core rib and also stabilize the fan at same time ✌️👍

[@guylongley1573]

What are the cfms of the fans? I'm thinking of doing the same on my Dakota because I go thru clutch fans. Yep love that tool got the same one. 👍

[@bienvenidojosejorajuria5125]

Just change your ground wire to a higher grade

[@leakyjeep5.9]

Foam tape ain't going to work. It will get sucked in to your fan.

[@bdogjr7779]

Awesome Jon《☆》Great idea to make the fan fit & look oem🤓👍🏾Let us know more specs like fuse & wire sizes🦎:*: Greetings from⛾Florida🤳my friend🤓🗣🔊☮✌👍🏾

[@sonorangaming449]

Why do you look familiar?

[@leakyjeep5.9]

My jeep requires 10ga wire for a similar fan

[@alantalley1268]

Im sure size isnt as relevant as cfm rating

[@lvalle1994]

Looks like a fan from a ford Taurus

[@TheProchargedmopar]

👍

[@DarrensTruckzs]

Awsome fan jon.. wish I knew what it’s outa I’d love to do the same to mine as I to put electric fan in mine sometime ago An it’s not keeping up so I put my clutch fan back on for now but I don’t like running noisie clutch fan that fits amazing An would work same in my truck as my rad is same measurement as yours .. could you find out what that fans outa so I can get one appreciate it bro ?!! Great video thanks for sharing

[@BoostedMotorsports]

I have one extra. I should have experimented with this sooner we threw almost 100 of these in the trash at work 🤦‍♂️

[@DarrensTruckzs]

BoostedMotorsports oh wow really lol.. so what’s the plans with the 1 extra ? Ship to Darren for a few ? Lol let me know thanks or even if you found out what it’s off I really like the size of the fan motor on it .. but most of all how it fit like a glove along with the small trim lol.. 👌