HEADS & CAM 5.9L Magnum Dodge Dakota R/T BUILD | PART 1

HEADS & CAM 5.9L Magnum Dodge Dakota R/T BUILD This is part 1 of the this project pickup truck build as we revive this project truck that the 5.9L v8 engine is not currently running in. We are installing a high lift cam from comp cams as well as indy x performance heads with 2.02 valves. We start off Part 1 of this series by getting the truck into the shop and tearing the old 360 magnum engine apart so that we can get it ready for the new performance parts.
Here is the detailed cam install video for the 5.9L V8 Magnum Engine
• 5.9L Magnum V8 Comp Ca...
Support BoostedMotorsports by JOINING Today! / @boostedmotorsports
*Checkout other cool products Boosted Motorsports has tested and recommends HERE* 👇
www.amazon.com...
👇 *SEND STUFF TO THE BOOSTEDMOTORSPORTS P.O. BOX* 👇
PO BOX 1873
San Jacinto, CA 92581
or
315 E Esplanade Ave
#1873
San Jacinto, CA 92583
For transmission parts check out WIT
Contact Clint [phone]
Mention Boosted Motorsports and save 20%
www.wittrans.com/
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports.
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them.
#Dodge #Mopar #Trucks

[@Bretbunde]

I’m taking notes for my 5.9 Jeep.

[@MonkeyCMonkeyDo911]

This is the best Mopar channel on KZbin tube extremely cool keep up the good work man I am also doing a project on my Durango I'm also thinking about dropping and hell cat motor in it

[@marvicbartolome9556]

You guys made it looks so easy. Thanks for the vid.

[@w.r.1356]

Watching these makes me wanna find an old Dakota r/t now 😏. Y'all guys keep rockin it man 🤘🤘

[@phillanassa759]

CLR is the best stuff to clean blocks, timing covers , radiators, anything with crappy coolant slime. sludge rust or scale. Calcium Lime Rust remover soaked, washed and flushed clean then neutralized. Use HOAT coolant to prevent further coolant buildup with reverse-osmosis water diluted with HOAT coolant 50/50. Do not use tap, well or city water ever even to top off. I did my 2000 SLT Durango in 2002, and 20 years later the coolant condition is still perfect.

[@brandonhill3283]

2:26 those Dakotas are extremely heavy. I should know mine fell on me 2 months ago lmao

[@winstonholmes5566]

I need to vacation somewhere warm so I can drive my Dakota R/T. Watching to pass the time during this Canadian winter..

[@RIZZ0B]

You guys are on your way to another fine build. Cannot wait to hear her fire up!

[@beef9c1]

jon, be sure to replace those engine plugs aka freeze plugs with new ones, cheap insurance. From what I see from that frozen or seized waterpump, I bet there is alot of rust inside the block. Dip those new ARE head bolts in fresh motor oil to help torque down the bolts

[@jamesparks1966]

Awesome project 🎉

[@bdogjr7779]

Awesome Jon《☆》This build will be a nice contrast to the blue R/T🤓👍🏾Great teardown fellas :*: Greetings from⛾Florida🤳🤓🗣🔊☮✌👍🏾

[@BoostedMotorsports]

Thanks brother! Will be fun to see how much faster it is NA compared to the blue truck. Definitely going to be doing some head to head action at the track with both trucks 😈

[@04hemibee]

Watching your videos for some ideas. I just bought a '97 swb Dakota with a 318 5 speed for a project.

[@adrielbarrios4559]

Badass video as always. So excited there is another RT

[@BoostedMotorsports]

Thanks brother! 💪

[@Dimination36]

Keep it up homie. This is the kind of content needed!

[@BoostedMotorsports]

Appreciate it! More on the way!

[@korn111685]

What a wreck to start with! Hope it turns out as nice as the blue RT.

[@davidcosper6500]

I’m so excited to hear that beast come back to life!💪💪💪

[@BoostedMotorsports]

Me too brother 💪

[@mikemcdaniel6200]

CDL works good. Like u use on shower.heads.I ran a hole bottle in my engine for 3 days. Cleaned out the block pretty well.

[@TheFlR3StOrM]

Awesome, another Mopar build going. Those indy x performance heads sould make a big difference with the cam and 1.6 rockers. Looking forward to seeing the results with the Hughs Air Gap intake with this set up. Stay safe brother and keep these video's coming. Giving me idea's on my old 99 5.2 Dodge Ram with 250,000 miles. I keep her because she don't smoke or burn oil and still runs strong.

[@r-shot8431]

Great build happening here. I am locked in - thanks for the content

[@BoostedMotorsports]

Thanks for the support brother! Can’t wait to get it running!

[@bretunderhill]

gonna be a sweet truck

[@BoostedMotorsports]

Hell yeah 💪

[@brandondimmitt8467]

Nice!

[@TejasToolMan]

Diggin that scoop

[@DarrensTruckzs]

NICE NICE NICE 👍!! I thought enjoyed this video !! Sweet little Dakota too !! Black my favourite colour !! Can’t wait to hear this run omg !! Should be a little sleeper man !! An sound chopity chop chop with cam An heads .. 😁.. is jon now that your all practiced up in this motor , when can I ship mine down to you to do same thing ? I live to have you do it !! 😁👍 soo looking forward to next vids to come bro thanks 👌

[@ryansamson4616]

Since the rims are getting changed would he be interested in selling the srt 10 clones that are on it? I’d love them for my 99 rt dakota

[@nadronnocojr]

Nice,

[@davidledford6482]

we had a 69 an a half with this whole fiberglass hood an scoop,first pass with issues was 14.03 quarter mile,an had more work to do of course with 383 magnum,it was like 1989 or so,an i w as 103...it did get faster for sure,used solid lift cams back then somewhat,an needed maybe to tweak valve adjustment etc,tires were very bald as i now remember,an got only the one run spinnin pretty bad...

[@mikemcdaniel6200]

With water of course

[@aliabdullah1616]

ooo man this should be fun!!!

[@sinister6.450]

Great content man! Keep it up! 🤘🤘

[@landonpoindexter114]

Nice build next time go with Trick Flow heads

[@brianl2000]

Love your vids💪🏽

[@BoostedMotorsports]

Thanks brother 💪 More on the way 🤟

[@ronaldmoparornocar9590]

Nice a new build with a new bud👍...I am still trying to understand the dropping it to the ground thing maybe an inch or two is cool but that is way too low for my liking...like the wheels...got the same seats in my Dakota seat track bolt down is different in the back floor is different looking forward to the next video 👍✌️👌

[@leakyjeep5.9]

Hell yeahhhh

[@davidledford6482]

paint wheels chrome,or sublime screamin green,yeah..

[@BLKDAK74]

Take the upper core support out already. 6 bolts for the core, 2 for the rad, and that fan shroud was out.

[@guylongley1573]

Great video . You really need to get a real hammer. lol Cant wait to hear it run.

[@BoostedMotorsports]

I have a couple BFH but didn’t need it for this one lol

[@davidledford6482]

please put dakota r/t emblems from factory back on the blue one,man it looks so good no matter your age..........

[@jeffreyheinzelmanjr3317]

I have an 02 Durango, I've been looking for long headers but I'm only finding shorts. Is that all that's offered? I've read long is better for performance on my 5.9?

[@blackbeardlivesagain]

Love the smell of oil from freshly torn down Mopar.

[@jeremeyware6330]

Do the viper srt wheels fit dakota?

[@winstonholmes5566]

With your Spin Tech headers, did you have to modify anything to get yours to fit properly ? I sure did on my 2000 R/T. 1 7/8 inch primaries with port plates to 3 inch collectors. Just curious if mine were lemons.

[@otbadrian]

My truck also has the paint peeling off lol

[@davidledford6482]

around 3800 pounds or so,lighter than challenge hellcats etc,an especially chargers from 2015 an up,but no 700 horses sadly.........

[@davidledford6482]

cool, great fine, but did i miss the mufflers install on your blue one or what...

[@forgottenmuscletrucks]

What was the quarter mile time with these mods?

[@iamdjlee1837]

Can you cam a 4.7 dodge dakota

[@scottbentley2825]

Does anyone sell a performance toque converter lock up for a 06 Dr with 5.9?

[@stunnasam21]

This looks like the same Dakota on KZbin from like 10 yrs ago that was supercharged

[@BoostedMotorsports]

It’s a different one. Apparently this good was inspired from that one 😬

[@Boxed_In_Crackers]

Hey boosted sorry but i have to ask, what was the name of that hood? I have to know im building a dakota i need to know what thay good is called please respond thanks! 🙏

[@PlatinumG]

How much for Jason's viper replica wheels? Is he trying to get rid of them since he's putting on a different set? I'm in border LA/OC. I also have a 5.9L 360 Magnum on a '02 Ram 1500 4x4. Wish I can do to mine what you guys are doing to your guys R/T's

[@poorperformance8850]

What are the wheels in the bed? Also I want to say djm control arms and cut springs are trash i hate mine so much. That will be my first change when I start on mine when weather cools down

[@chrisg2619]

What how did that set up with heads valves etc set him back ? I have a 03 r/t looking for more top end speed don't drag race just pull my boat and do some top speed runs.

[@davidledford6482]

next,find a rare solar yellow dakota r/t,there beautiful,to some of us..reg or ext cab..

[@jacobboggess4167]

What brand lifters did you guys use? Sealed power?

[@onefastlife5017]

I been running a djm 2/3 drop, lower A arms and rear hangers with 1” block, most guys had bad luck with the a arms breaking , is that not a Z truck ? I see the flares missing

[@dakotart9636]

What horn is that??

[@jeremeyware6330]

Srt 10 bolt pattern same as a dakota?

[@jamesduhon8252]

That's what I wanna know 😂

[@forgottenmuscletrucks]

Are those gen spokes for sale? 🥴

[@ronf6916]

Jon What wheels are those on the black dakota?

[@toddmiller4421]

Are yaw willing to sell the wheels? I want em for 01 Durango RT build I'm working on?

[@rickyteague447]

Oven cleaner

[@chapoelite1491]

Should I get one for 1000 with 230k miles single cab v8

[@jamesduhon8252]

I just picked up a 99 RT single cab shorty with headers for 1800 only 192,000 miles wasn't a fan of Mopar until I got a chance to drive a scat pack Challenger but Dakota did not disappoint

[@davidledford6482]

pleasee dont take till thanksgiving etc..i wanted to hear mufflers on dakota so badd,i had to take my new shocks back,too long,an ordered some 0 to 4 inch drop ones i hope an pray will work, my shocks all 4 were so dam shot..an new is pricy..240.00 bucks just for 4 shorter shocks..i think mine is dropped around 3 inches..not positive...