E220 CDI Mercedes w210 Turbocharger - Problems / Removal / Replacement

[@doit_vehicles]

E220 Alternator Removal : kzbin.info/www/bejne/eoLTf2BsnZKqe7M

[@patrikrusinko]

Probably the best mechanics tutorial I've seen. Thanks.

[@baflabies]

Agree!

[@DieselPurge]

You should be inducted into Mercedes diesel hall of fame, keep up the good work and videos.

[@doit_vehicles]

One day 😅

[@djocharablaikan8601]

Legendary car mechanic, never seen a better tutorial video regarding car repair, not even autodoc does it better then this, what? Where? Why? How? All answered, god bless you.

[@turgaykotil1830]

VIDEO SHOOTS A VERY SUCCESSFUL AND QUALITY IMAGE. THANK YOU FOR THE VALUABLE INFORMATION

[@doit_vehicles]

You're welcome! )

[@alpha-ne4fq]

Hi! My engine has a lot of oil leaks near PCV, shoud I consider to change it, or leave like this, since the engine is working very good?

[@libran58]

Thanks, the W163 ML 270 is similar but maybe a bit more complicated, seem to have more tubes in the way. But need to see this to remove the water cooled alternator.

[@zdravkopeev2002]

Amazing video. Why did you not clean up the dirt before reinstalling? Would it not help cleaning it?

[@LokeJohansen]

Love your videos.. Keep em coming ;)

[@2deaf4sound]

Good job! Espsecially that you explained the problem with the stuck levers. That what for sure causes my problem with the lak of power that disapears when you put the pedal to the metal a few times.

[@doit_vehicles]

it's always good to do a full inspection to be sure )

[@2deaf4sound]

@@doit_vehicles I will definitly take the turbo apart tomorrow and check it

[@Daniel9738]

Hello! Very good and useful videos! My question is that, can you remove the oil inlet pipe to the turbocharger without removing the turbo? Mine is leaking where the pipeline connecting to the oil pan. Thank you in advance!

[@antemisetic4544]

I've got question about this opening and closing in video time 10:52, should it be opened when actuator hand is up?

[@gergosandy6529]

Hello! why is the pipe cut before the EGR valve???

[@markojanko3000]

Is there a difference between the regulator vacuum of the turbo and the one of the egr? or are indetic

[@rakeshdangi199]

Whenever i give race after that tourbo make noise alot like coughing..

[@olgunaziz3964]

My problem is loss of power ,been told after examination that the turbo should be changed ,the front propeller moves slowly then stops ,and there is no movement from the back of the unit ,so a new turbo should be installed . The vehicle covered 155000 and is 22 years old .

[@constanting2678]

Do you have somethings video with automatic transmision ?FOR this AUTO?Thank you.

[@doit_vehicles]

It will come

[@sakuleppiniemi5616]

I got some whistling/ wining noise about 2500rpm and loss of power at low register.. Could it exhaust manifold gasket? And what would be usual kind? There is no fault codes and i am pretty sure that it's coming down there somewhere? Thank you.🙂

[@nikolaristoski1489]

I have oil leak inside intercooler pipes, i watched one of your videos where you explain oil separator leak and how to fix it to prevent oil in intercooler and intake manifold, and then you mention that turbo leak can also push a loat of oil into the intake manifold. Any idea how to fix that leak without dissasemling the turbo, for example change sime gasketa or something external, or turbo rebuild is needed when it leaks oil into the intercooler, intake manifold and all the pipe line?

[@WalterWeakley]

My c220 CDI w203 2005 diesel makes a load noise but the boost pressure is correct, this happened a while after a new intercooler was fitted. can that be that the suction side has a loose inlet pipe? power is okay but slightly lazy. not much. I used EGR cleaner in the gas tank, a Shield product. can that have an effect on the load noise?

[@nenadkacavenda2444]

Veliki pozdrav iz Srbije. Video snimci su ti odlični i jako korisni. Imam w211 110 kw auto dobro vuče ali kada radi u mestu i polako dodajem gas turbo se čuje kao da zviždi. Da li je to zbog blokiranih varijabilnih krila ili turbo jednostavno treba da se zameni?

[@mercedesdrifter16]

Amazing job! I will try it for my C270 to check because sometimes i have Check Engine light on and i have a weird whisper when i accelerate over 1.800 rpm it might be the turbo or only the conexion that you were taliking about. Thanks for the tutorial!

[@doit_vehicles]

I am glad you find it usefull !

[@lionpauu7360]

Great detail. Excellent work!

[@doit_vehicles]

Thank you! Cheers!

[@kamalkamal2563]

hello . mercedes c220d 2017 . i found my car speed dropped down to 2 gear not shifting upward . now after checking they found something wrong with turbochargers. is that common cause of not shifting gear upward and engine management lights on . please let me know.

[@pepecodino]

thanks men! good review. i appreciate any info about this car.

Hello! I have a P0251 error in my OM646 w203 c220 cdi. After 45 mins running, it shuts of at idle speed. Need guidance

[@coreypanes1159]

Im sure mine has this problem , is there a way of freeing up the veins inside that werent working on yours ? Sure mines the same , would it be a new turbo or would they free up with a clean ?

[@AlexAndreiZAR]

Good video, but the knocking with metal hammer on the hot case of the turbo is a big no no... you either use a rubber mallet or a wooden piece which you hit to push out the stuck parts. You can end up cracking the hot side hitting it like that.

[@simonblackwell4112]

1st class tutorial, thank you !

[@doit_vehicles]

🥳

[@extreme995ful]

can you show us how you install it back on the car

[@Fank.general]

Gracias por el vídeo! Me ha servido de mucho. Y he ahorrado dinero👍👍👍

[@RideShootDrink]

Nice vid! Where are you from?

[@Phipsi333]

Awesome video! Thanks for the effort, you've got a new subscriber, best regards from Germany One question though: what about the oil input line of the turbo? how do you remove that? Wasn't explained in your video

[@doit_vehicles]

Hello ! Thanks for watching and subscribing ! . The oil line after disconnecting it from the turbo, it's also connected on the engine head by an e10 and bracket. It looks like I forgot to attach that video part when I edited this video ...

[@Phipsi333]

@@doit_vehicles thanks for the reply!

[@WalterWeakley]

c220 cdi w203, i have a load turbo noise, power feels okay, but the noise is load, can that be an inlet pipe loss or crack? if it is a power pressure pipe the power will be less

[@Jk18818]

I have old C220 and it has a problem with turbo charger I replaced the cartilage and now it releases white smoke when I exalte the car please suggest me the solution.

[@brunobegic3841]

One question I'd love you to answer: How many km/miles there is on the clock of this particular car? I have a C class with the same engine and I'd like to know at what point can I expect something like this to occur.

[@Peakuu]

Depends on how you treat your car. You could kill a reliable engine through bad treatment and make a high mileage on an engine that is known by being not reliable if you only treat it well and service in time. Some engines are called not reliable but in reality they’re not bad units but they earned such reputation from people who don’t know how to treat and service it.

[@mokdadomf1439]

How to connect the air ducts to the Mercedes e270 CDI turbo

[@abdussalammohamed8630]

Hi thank you for the best video on u tube. just like to know on refitting did you added oil to the Turbocharger by the pipe and how, thanks

[@doit_vehicles]

The oil will be delivered by the main oil pump unlike a supercharger

[@olgunaziz3964]

Thank you much obliged.

[@hiphoop150]

Why did you cut the tube at the right side it adds more power or what?

[@robertdariol108]

thank you for sharing your knowledge

[@bajramemini5305]

Wow nice video man!

[@andriusk6313]

Good video, i have one question i get alot of blueish smoke on the cold start if car sits for longer time ( day or so) i replaced holow bolt and for oil feed line to turbocharger, that didnt solve my isue, could it be related to oil drain pipe under turbo?

[@doit_vehicles]

Most likely the oil leak is internal not from the turbo

[@andriusk6313]

@@doit_vehicles i suspect oil is coming from pcv pipe, is it good to instal oil catch can or not realy, i heard split opinions about those

[@r9cheverny433]

Woow you are awsome teacher!

[@rasheedsettri3915]

I have a question. Can you run the OM646 engine without that sound difuser/Silencer? I want to remove it for more spooling noise.

[@doit_vehicles]

Yes, but it might be ilegal depending of where you live

[@TheTrecet]

Hi bro I have trouble with my C220 CDI could you help me if I sent a video in? After driving it for a while a engine yellow symbol pops up and the car wont start sometimes after.

[@jaberabu-khousah7835]

Great vedio. Keep it going.

[@energyionut1318]

Do anybody know where I can find the gasket that is going out of turbocharger? I have an oil leak and i cant find that gasker. Or maybe someone knows the code. Thank you

[@khameeleeon]

I decided to buy a merc just by watching your videos. lol

[@duskojovanovic4372]

i think you maybe made misstake om646 is made first at 2002 I think this is om611

[@armandh9287]

Perfect explanation! Thank you!

[@doit_vehicles]

You're welcome!

[@rakeshdangi199]

Hello brother i am rakesh from india i have Mercedes e class 2009 Model round head lights model e220 4 cylinder...

[@valdetcanameti568]

Well done. I have my 210 cdi 2001. I cant find the problem. When i start goin it shakes and got black smoke.

[@doit_vehicles]

Injectors problems , Intake clogged

[@jekku6671]

Hey, I have some whining on the turbo area. Inspected turbo, pipes exhaust manifold. Everything seems to be normal. Do you have any recommendations where whining could come on these 220cdi engines?

[@doit_vehicles]

Hard to give clear answer . I would suggest you have a closer inspection on the turbo

[@jekku6671]

@@doit_vehicles Inspected turbo and turbine don't have any play on it. Car don't lose power and whining will stop when engine is warm around +70celsius

[@Laurentiu_Dediu]

@@jekku6671 I have the same noise . What can be?

[@Laurentiu_Dediu]

@@doit_vehicles where are you based?

[@jekku6671]

@@Laurentiu_Dediu Not sure maybe some pipe broke

[@hassansalmi7796]

Good video

[@doit_vehicles]

thanks

[@fierakuitali9313]

Hello Sir . If the actuator dont work does mean that little things have been stuck or need to open the turbo to inspect it? Thank you Sir

[@doit_vehicles]

Hello ! That's a good question. No, it does not necessarily mean that the turbo flaps are stuck. The way to find out without removing the turbo is to disconnect the actuator and see if it moves in and out freely and if the vacuum will move it as well; There is a video I made on a turbo on ford focus ( same principle ) where I showed how to test these if you want to see .

[@fierakuitali9313]

Hello. Thank you asnwering . If the actuator move does mean the turbo work good? I have some oil down like the video. Is it normal?. Thank you good man

[@petertoth2350]

you are the Best.

[@morneisaacs76]

Very helpful

[@369melo]

I would like to know hot to delete EGR valve. Thanks for the videos!

[@r9cheverny433]

Yeep for Om606😁

[@alexandruion1895]

On my w211 e220 cdi The turbo actuator moves just a little. Is it possible those vanes from inside the turbo to be stuck? Sometimes the car has a lot of boost and runs very well and sometimes the car just dont have boost at all. Also when the boost is good the car is like a diesel train. It leaves a black cloud behind

[@doit_vehicles]

It looks like there are a couple of issues . If the black smoke comes when there is boost usually it's not because of the turbo . It needs a proper diagnose to find out ... But start with that actuator and investigate why is almost stuck . rust , phisical damage ?

[@alexandruion1895]

@@doit_vehicles there it seems to be no damage. Now I am thinking for 2 reasons for my problem: the geometry is stuck, or the flaps from the intake manifold gasket also named Bermuda triangle because i have to remove half of the engine to acces it..

[@MrChopemup]

Alexandru Ion how did you fix it ..?

[@alexandruion1895]

@@MrChopemup still not fixed it . Curently I am driving other car

[@AreskCSGO]

@@alexandruion1895 Verifica injectoare, am un w210 care dadea o groaza de fum, am curatat EGR, senzor debitmetru, plus aditiv pentru injectoare si e mult mai ok, overboost aveam si eu, si dadea o groaza de fum, am reconditionat turbina degeaba, vezi ce mai are inainte.

[@franz7936]

❤❤❤❤❤

[@jaferessop4412]

Great video

[@doit_vehicles]

I am glad that you liked it

[@NoStiemTravel]

Great video buddy.. I LOVE YOU! but... you say that the actuator rod should be easy to push. I have an electronic Actuator that is impossible to move and the turbo is always losing pressure. Also, I have a lot of oil in the turbo intake from PCV (probably is faulty valve). These two makes the EGR valve get full with carbon and intake manifold. What advice you have for me.. apart of "sell the car" :)

[@doit_vehicles]

I guess it's a newer car ? since the actuator is electronic . The best is to clean and stop the oil leak , read the live data and try to find out what is causing the losing pressure ; it might not be from the turbo .

[@wohare1]

you’re a fucking legend bro

[@eirikerga3015]

how to remove that stupid turbosound diffuser

[@nicolaegeorge9259]

👍👍👍

[@benjaminlevi7792]

Good job

[@reibelalla2266]

I have a problem everytime i drive i start normal i can accelerate at 5000rmp but after i drive for a while i cant pas 3000 rmp i have changed so many things😭

[@lilniggabrom388]

I have the same issue but im pretty sure ive found out my problem is the intake manifold swirl flaps are dirty. Im swapping to a manifold with no swirl flaps soon ill let you know if it fixes the issue.

[@turgaykotil1830]

You are a professional or amateur mechanic. do you have a shop

[@doit_vehicles]

Maybe one day

[@vividchabuda]

I don't have power on my 220

[@جبلجبل-ب5ذ]

Why did not u clean it in the Last of ur youtu.be

[@2deaf4sound]

I‘m almost sure there was no OM 647 in the w210. Should all have been the OM 611.

[@DARKredDOLLAR]

Or OM612 (the 270 cdi one) but insides look very similar to the one in the video.

[@2deaf4sound]

@@DARKredDOLLAR just count. The 612 is a 5 cylinder… ;)

[@DARKredDOLLAR]

@@2deaf4sound yeah, I know. I just meant that this 4 cyl and 5cyl layout is very similar. The 320 cdi is a bit different from what I've seen

[@2deaf4sound]

@@DARKredDOLLAR they are all basically the same. Just everyone one longer.

[@goranjevtovic8865]

Ovo je om611

[@Ionut-lm9cj]

Abcd