W210 Mercedes E220 CDI Coolant Change , Thermostat Replacement /Temperature Sensor -Test

[@doit_vehicles]

W210 Water Pump Change : kzbin.info/www/bejne/gWamdHuLbrt2rJY

[@oyiboani]

The video is very informative thank you. I have a 1997 Mercedes Benz c220 cdi with over heating problem any help ?

[@TogetherFaster]

Thankyou for the great explanation and for sharing your good work! Greetings from Germany 🤗

[@ebrimadarboe1851]

Hello brother thank you. Can i ask you something about thermostats 🙏

[@mautoban66]

Thank you so much, this is the best Video I found about the topic 👍

[@longoborgini2778]

and where is the fluid drain plug from the 270 cdi engine block? Greitings

[@tsdd.1567]

My fan never works. How can I simulate hot conditions so that I can diagnose the problem? When I give 12 V to the fan from an external source it spins very fast, so the problem is not in the fan itself.

[@alpacinogodfather9523]

Hi, which you coolant used?

[@pepanovak241]

Very helpful, I have Mercedes W203 and everything looks very similar. But I have question, how do you bleed the system properly, I dont want to mix the old coolant with new, to be accurate, how do you get the coolant out of engine block. Do I also have to wait until the engine temeprature reaches 90°C for the thermostat to open?

[@doit_vehicles]

One way is to add first destiled water , run the engine , drain it a couple of times . Other option can be more challenging: remove the alternator if its water cooled and it will drain most of the coolant from the engine block . I made a separate video about the alternator..

[@happytashman]

@@doit_vehicles I think the OM611 has an engine block coolant drain screw.

[@997kosta]

Good video! So what is operating temperature for this engine, my w210 e 200 cdi i reading 65°c, but i thing that is wrong. Thank you :)

[@doit_vehicles]

When it's cold the temperature will stay under 90 degrees c no matter what you do, from what I've seen .

[@jessekorhonen4268]

hi, what is that hose coming out of the thermostat housing and why is it plugged?

[@doit_vehicles]

Good question! It's there because the same thermostat design is used on other models which have an extra cooling hose .

[@schalz9209]

Very good video, biltema

[@doit_vehicles]

Nope 😁

[@schalz9209]

@@doit_vehicles Swedish or danish?

[@ruslanismayilov2068]

Thanks

[@beonshapebeonshape8199]

Hay, Where are you from? 😊

[@khalidfarah5757]

I have same car w210 220 my problem is too much smook and misfire mercedes technical could not tell me anything they just want to change a lot of things and still they are not sure if the problem goes away egr valve I changed still nothing changed what is your advice please. Thanks

[@doit_vehicles]

It needs proper diagnose. It might be leaky injectors the cause ..

[@kolbm262]

this guy makes the best 220 Mercedes videos i have seen

[@PaulGheorghe6684]

Hello, I have a w203 with the same engine like this one. Is it possible to change just the temperature sensor on the thermostat without draining the coolant? I bought a new thermostat and it comes with sensor. My coolant is very new, just 1 year old.

[@doit_vehicles]

Hi ! You will need to drain like 20% of the coolant . If you wanna reuse it , just make sure to keep the drained coolant as clean as possible.

[@kakhatukhashvili3452]

good work..

[@doit_vehicles]

Thank you! Cheers!

[@mihaitaalbu8965]

C220 CDI how much coolant it needs ?

[@doit_vehicles]

If it's the same engine , in total should be around 8 liters

[@lpvinill]

@@doit_vehicles same on OM611?