WHY IS THIS SO HARD...

[@connortierney9450]

“Aluminum is strong until its not”-Dan, 2020 *the more you know*

[@017garage9]

Dan may be on a government list and not realize it adhd has got the best of my curiosity a few times

[@ryanfritts519]

I’m a welder by trade and I laughed my ass off whenever you Shocked urself because I know how that feels. But for real I’m local to your area I live right down the road from Justin’s shop if you need any welding done contact me

[@caseytodd7632]

At least you don't have to duck down in the ambulance. Dan's dimensions never change.

[@joefoster9879]

as a tig welder the one thing i can say to you is practice feeding the filler wire through your fingers and also your dipping the tip so do a dry run before you start

[@big_beed]

"Dan an angle grinder would probably better there" Dan: "Sawzall go brrrrrrrrrr!!"

[@jimdarhower4945]

This comment gave me cancer.

[@MkGreene]

That's how my brain is too. If I don't put on a show or movie to watch while I fall asleep, I'll just lay there the entire night figuring out how to build crap in my mind.

[@jasonkim2772]

I love how you’re always real and genuine. Don’t see that much often anymore. 🍻

[@tubbydaporkchop]

lol at dan's tactical reload at 9:52

[@LifeofMarcus]

im dead

[@toeleg]

Lmao the extra little shotgun pump at the end tho 😂.

[@sandman42nato17]

Dan: "Next thing you know, you are learning how to make a hydrogen bomb, why was i going on about that?" (A few weeks later) Dan: "today we are going to make Horoshima and Nagasaki look like a joke"

[@chaoz_2k185]

Dan: breathing in aluminum is bad for your Also Dan: continues to grind aluminum without respirator

[@jonathantaylor2584]

I'm waiting for the episode where Dan decides this project isn't enough and tubs the rear of the ambulance and slams it

[@zyiesmcconathy3544]

“I already have bad memory and not from aluminum” I knew I got them toker vibes😂😂

[@DagoBoilermaker]

I’m a welder by trade and legit DIED when you welded keep pushing understand the metallurgy behind aluminum what amps you want to run at for material thickness also understand what Tig wire would be beneficial. Usually 4043 and 6061 are common wires for most types of aluminum. I like 3/32 and 1/8th rods for a lot of things. Also look into tungsten theory! Also change that torch set up! To a #8 cup and a gas lense and play around with stick out( tungsten sticking out) none the less keep going at it dude!

[@griesj81]

Dan, for your tanks, it might be smart to have them on the driver side where those external doors are. That way, if you need to fill or empty anything, you can do it from the outside, and not have to run anything across the floor, or leave your interior doors open. I know you said you were going to put batteries in that area, but in terms of accessibility, it may help to have it behind an exterior door.

[@Mblayher]

Hey Dan, I fucking love how happy you seem doing this content. It's super awesome to see the growth over the years. From having that Bmw back in the day to the to where you are now. Keep doin' what you love man.

[@traceur694]

Dan, your VEDUC uploads are bringing me back to your old school vlog videos and I'm loving it. I like your new videos too, but these are just OG Top Tier Content. Bring some of this back after Christmas too buddy!

[@concludedfire9587]

Dan I've been watching you for 5 years now and you just amazed me by how you will to just go for with any project your working on. I really enjoy watching you video their very informational and funny . So man keep up the good work you doing and have a Merry Christmas.

[@weldeadlobes86]

Its kinda crazy watching you cut that beast up because I use to work for Braun building those damn boxes lol. Lookin good so far though.

[@MrEbrahim019]

11:24 That grinder went to "Final Destination" mode!

[@gabebitner4101]

One of the ideas I've had before for many a build is an air ride suspension so when you set up for the night or day you can drop the suspension and be in "Home Mode"

[@upstateshenanigans430]

Dan's channel name has always rang a bell with me but I never watched him until recently but hes quickly becoming one of my favorite channels. One great part about coming in this late is the entire backlog of his channel is new to me and I got so much to watch. One crazy thing is watching his friendship with justin. Had a horrible experience with a shit shop wrapping his C7 but that shitty experience actually lead him to what appears one of the greatest bromance ever in KZbin history. Sorry to use the word bromance in 2021, seriously I apologize lol

[@brianbennett8881]

Aww. Dan blew us a kiss.

[@jimdarhower4945]

Aluminum is sooo nice to grind/sand. Like butter.

[@adventuresofpyro9020]

P'Blaster works wonders! Used it in my High School Automotive Class. Pretty sure this is the same stuff we used in a car that was sitting awhile to get rid of wasps, hornets and bees. Killed them almost instantly.

[@backtoobasics]

oh man, ive been without a water heater for six years(#trailerlife) all you need is a big bucket of trough(maybe a bath tub if in the house) grab the lobster boiling pot you have in the garage and fller up get it tupid hot and start filling you trough all you need is 3" above your hips while sitting, always wash hair seperatly if cold out side with no shelter around you.... stay safe adn take care. #freedomisalifestylenotamindset

[@brendonricketts9290]

Im super pumped for this build Dan. Keep up the good work man!

[@chairmanrice7216]

I weld mig ally and tig ally at my work. We don’t use the push pull mig gun just change to a Teflon liner. It might make it easier bc then you don’t have such a bulky gun.

[@jtf881]

Dan this was a great video, the overall quality of editing and transitions made it fun to watch! Love your content

[@Reuschman]

"...aluminum is strong... until its not" - Dan 2020

[@Rnfjaydee]

"I already have bad enough memory" lmfao good old weed

[@nitroraptor2]

love the ambulance build im looking to do a delivery truck house so its cool to see a build i can relate to

[@The_Rejected_Son]

Hey look into this stuff called kilmat it’s great sound denting material and also helps keep heat/cold in the area

[@brassplinker.556]

This video title deserves a “ that’s what she said!!”

[@dankhill1780]

Nice

[@josephvecchio8528]

not to sure about that haircut tho lol

[@brassplinker.556]

@@dankhill1780 thanks

[@brassplinker.556]

@@jakebarber1461 HaHa!!😂

[@brassplinker.556]

@@josephvecchio8528 it’s not bad. It not my style but still looms good on Dan!

[@Zakerath]

ah from the thumbnail+title I thought I could have an excuse to meet dan and help him with welding (I'm local and love teaching), but nope he clearly knows what he's doing. XD. I thought if he was having trouble he'd do something like not having an A/C welder for aluminum, not cleaning it beforehand, on the plug welds not going in circles, that kind of stuff, but nah he's got it down and not making rookie mistakes, just a matter of practicing consistency. If you don't like the weld buildup that bad, ya could give it a shot using a smaller diameter rod and weave or do multiple passes to bridge the gap, and torch travel angle is going to affect it a lot. It's amazing how much torch angle matters in tig welding, didn't realize it until my company's weld engineer was training me to train others how to pass their certification tests.

[@texasrider4D5]

Thanks Dan as always for the vidjas. Especially after a shitty night of working.. saw the notif and i was like.. awesome. Lol thanks Dan. 🦅🇺🇲👍

[@HoodratFamilia]

Dan i was a plumbing technician in Mississippi and Louisiana. I stay north of Atlanta and would gladly help get you some hot water all you would have to do is purchase the part and or the water heater could still be under warranty

[@JakeTheSnake358]

Do it with dan snow boarding trips in the ambulance camper? Maybe get back into paragliding. Can’t wait for road trips with dan.

[@itasty4089]

12:56 “Zippitiy Zappity, fucken stop it”

[@thomasdube3921]

Wolfenstein is my favorite game series. Cool stuff man

[@Blueraspberryguy]

I’m pumped to see the progress on the Danbulance!!!

[@KompulsaOfficial]

I just noticed your corded saw :) I use one too. It is several years old and doesn't look like it's dying anytime soon!

[@fullsend9076]

Watching dan grind aluminum Me:screams in aircraft mechanic

[@MilesHolt]

Really enjoyed this video reminded me of older videos and old Dan for some reason. Even enjoyed the ad. Lol. What's your plans with all the exterior doors. Keep some for battery access and stuff? Keep others locked that arent needed or are you going to close them in?

[@tedharveyiii5194]

LOL...those that can't TIG, MIG. It's to dirty Dan, can't get a proper puddle with it being contaminated so much. Spray on primer, powder coat or any type of material covering makes it almost impossible. Learn on clean aluminium first, it will be a world of difference.

[@toeleg]

Feel like his stickout was to much for aluminum as well doesn't help when it keeps sucking in filler rod every other dab. No shit talking though, I'm no master of Al welding.

[@willdawson8460]

I love how pot references are making a strong subtle entrance

[@yoco1359]

When you get to the video 1 minute after posting and there's 1 view O_O I love VEDUC

[@dancavazos6241]

Hey Dan I don’t want to insult your knowledge, but I noticed you were welding solid beads all the way across. I come from an Automotive collision industry and most times we weld like 2 inch beads and space them out 2-4inches to prevent stress cracking from the minor flexing of the vehicle. Maybe you already knew this or had a reason not to but lots of people don’t so just wanted to let ya know. Ps love the Camaro, I’m building and 1980Z28 my self and You’ve inspired me. 👍

[@redman715]

You should insulate around those finderwels because you will hear road noise like crazy when driving

[@HahaBumble]

11:24 Almost turned into a workplace safety video. Yknow, the kind that's entirely too gory.

[@patkitkat]

You are not doing an easy build my dude. Keep it up Dan!

[@frowdo8455]

If it’s not extremely hard on you Dan, I think it’s lowkey better having these daily uploads. Or at least every other day. Sure the videos won’t be as long but more videos for us lol

[@justin31182]

Great video Dan!!!!!

[@beanrschnitzell6394]

You should do the shadowbox/folded flag thing next to the poster next time that seems like an interesting story for the thing you talk about in your office

[@kalebstout7673]

Hey man I’m a subscriber and love all the ambulance content! I’m currently brainstorming a build and am curious if there’s any way to sink in the floor even in just one spot. I’m 6’3 and have excepted I won’t be able to stand but pondering the idea of a sunken shower. Curious if you think it’s manageable.

[@davidrollend219]

Acetone goes a long way when tig welding aluminum. I would wipe the surfaces and the wires down

[@GarageAddiction]

StarCraft every day? Hell yeah!

[@tinysupreme6417]

For some reason I was just remembering the time when Dan, 50 Cal Val, and Mark Serbu shot guns out of an airplane and almost got in trouble with the law. He was definitely hooking up with Val even tho he never confirmed it.

[@JasonGtfoh]

Love all these uploads man

[@SoL600rr]

Dan I love this shit!! Gotta keep your head up man you’re entertaining a lot of people👌

[@Poppingshots]

Thanks for the vlog drop on my birthday!!

[@DOITWITHDAN]

Happy birthday ❤️

[@BigTexas1845]

I would leave the wheel wall open. Use the space for electrical outlets.

[@quincy578]

Yooooo I remember when you like p blast hit your boy up lol they must love you you got the sause can there boy

[@RedRaven85]

My brain is absolutely the same way. Something happens during the day to pique my interest in a subject and I end up obsessively researching and reading/watching stuff about it. It's how I ended up in a Wikipedia rabbit hole one night until about 2 or 3 in the morning reading about the British Royal Family... Sad thing is I have shit short term memory so I don't even remember what triggered that one HAHA

[@braaapattack2937]

Last time I was this early, I had to apologize

[@crazydoom3dude]

That doom design on your snowboard i have as a half sleeve tattoo

[@djatfullthrottle]

this ambi series is making me wanna build up a van into a rv now

[@maxmilianfalatek6019]

3:33 u need to take a lil detox to get your short term memory back :DDDDD

[@nitroraptor2]

i cracked loose a motor that seized from sitting for a few years with pblaster and had it running that day

[@Moon___man]

pb is really the goat

[@silverviper_5324]

I think “it’s strong til it’s not” should apply to everything

[@leepietzsch]

13:06 if Dan played Forrest Gump

[@2wdCosworth]

I think somebody has stop smoking so much weed. You seem much more sharp ! Keep up the good work !

[@MrRcw79]

"OG Doom 2016" lol.....I remember playing that game on the Panasonic 3DO 27 years ago! That was OG. Cool snowboard none the less man. Holy fuck I'm old.

[@DOITWITHDAN]

I just meant concept art. I've played all the Dooms on all the platforms, even the bad ones like Doom 3D lol

[@MrRcw79]

Tell you what, it was a groundbreaking game in '93. Was pretty intense gameplay for the time. That helmet is cool too.

[@monotonecookie8939]

Hey dan, Id come down from nc to you and do the welding, currently in getting my bachelors in welding

[@DjukeduEighty8]

Just to be “that guy” when Dan explains what he is about to do, I always yell “booooo get to work already” at him.

[@williamprentice9539]

That music while you were welding made me think the Power Rangers were kicking some weird, bad CGI characters ass !!!!

[@caiyanb2634]

Fucking love the Tech N9ne reference at 8:45

[@benjaminjensen1012]

Love you Dan

[@johndiaz3122]

I think an epoxy floor would look dope

[@shiftydolphin]

as long as it aint your worst weld it works lmao

[@JordanCox633]

Imagine if Dan posted one motorcycle video that shit would blow up

[@dadankjester]

See how fast it is now that you pulled out all that weight

[@thefarmkid13]

Saw the video in my sub box before the notification.

[@brcebrce83]

I'm currently sitting in my welding booth having issues with TIG FML..., Just not a good day..I'm so pissed I almost shouldn't take comfort in this vid but I am..

[@alleng7947]

I started watching when it said 36 second ago and didn’t notice

[@brettflesch9310]

Big vibe time

[@xxtrapxx]

“Aluminum is strong till its not” 😂

[@uncleape9048]

He madeeeeee it!!!!! I was a lil worried

[@uncleape9048]

Shoooooo you getting me worried again brotha 😭 do you think buying a older Camaro would be a good idea for a teenager who has plenty of mechanical experience?

[@CannaKarlina]

big mood 11:12

[@MoxiesonTV]

Dan we all know you smoked out of a can as a kid too 😂

[@gar6rider526]

I would have used a stick welder set on 95 with 1/16 129 aluminum rods

[@ljrogers7685]

ok but if your not watching a video on hydrogen bombs at 3 am your doin something right 🤣

[@lb4899]

PB blaster made by Blastercorp

[@seanhass5725]

dan, i love your videos, ive been here since the beamer. but ill be DAMNED if you think im callin it "p" blaster

[@imitt12]

TIG isn't the easiest thing in the world, and it's not easy even if you've done it before. I've been welding since I was 15, and I started out learning stick and oxyfuel. TIG is still fairly difficult for me.

[@imitt12]

And aluminum TIG is even harder. Don't get yourself down if you aren't having luck with it immediately, it takes awhile to get good with.

[@whitesuffokate]

I use sawsall’s everyday and it slightly drives me insane watching dan try to hold it sideways cutting when you can put the blade 4 different ways 😂 shit kills your wrists holding it all janky

[@llamacebu216]

Fill the holes with concrete epoxy

[@mp40submachinegun81]

Now i want to search "how to make a hydrogen bomb" but im scared the RCMP will show up at my door if i do that

[@FORDNGM7353]

What is that make and model of that lever pewpew on the floor