Dollar tree VS Poundland LED lamp and hack.

[@munjee2]

"Does he give the children presents then touch them inappropriately?" I have been watching this channel far too long to be caught off guard by that one

[@OAleathaO]

I would have been disappointed if he didn't make some kind of comment like that. ;)

[@COBARHORSE1]

Enticing the kitties into the popemobile with candy.

[@gh0stwulf863]

That segue was absolute perfection.

[@BobSmith1980.]

That's exactly why I like Clive

[@YvanJanssens]

That's actually quite accurate. Also, add racism/blackface and kidnapping kids.

[@JeffreyGroves]

You can tell when Clive gets excited by how quickly he tears into something! High excitement indeed this time!

[@MrPhil1969]

"I shall use brute force and ignorance" Where can I find the T-shirt with that quote?

[@invendelirium]

I've recently bought more than a hundred of these current-regulating lamps, ripped out the aluminium disc boards, and made a powerful lighting for my room by sticking those to a aluminium profile, and soldering some wires to connect them all in parallel. Turned out to be a surprisingly cost-effective solution, I am periodically searching for anything better and this approach still wins by a substantial margin. It was very fun to walk out the store with two plastic bags full of LED lamps =)

[@PaulSteMarie]

The funny hat is a bishop's miter. Probably intended to be St. Nicholas, who was in fact a bishop.

[@DavidRandBridgnorth]

I did laugh at "papal helmet." 🤣

[@edisone1]

My house is lit with mostly Dollar Tree lamps, and so far they have proven to be reliable & pleasant. Their "equivalent" 40W & 60W give off a nice warm light, while the 100W examples are best for work areas or cellars - bright but an ugly bluish.

[@bruceinraleigh9999]

I bought a bunch of Dollar Tree lamps for the new house. They're disappointing. Most died within 18 months. Some as soon as 6 months. Not worth it.

[@GeorgeJFW]

It’s amazing how much they can pack Into so little! Great video I love seeing the implementations they are coming up with to drive LEDs 👍

[@MarcosLucas]

Clive am falling in love with your videos. Yesterday I found the same led lamp as you showed. You answered all my Doubts. Thank you so much!! Keep the good content up!

[@johnrobinson357]

Clive, i don't know why but i just never get sick of this stuff. Perhaps because i took everything apart as a child, much to the chagrin of my mother. But i did learn a hell of a lot that way, including what a good whack from the mains feels like - instant respect and a bit of fear. Great stuff.

[@laurencefaux6451]

I like the way you present, and also hack the circuit in realtime

[@ziongite]

2 concepts, one concept uses a transformer to drop voltage, then a little bridge rectifier chip and a capacitor to smooth it out, these are connected to generally a couple of the 1w type chips. The other concept is like in this video, instead of dropping voltage, they decide to accept a huge voltage, and to just have surface mount style LED's that have multiple LED's inside each chip, essentially the large enough series ends up adding up to the high voltage, and obviously it isn't AC, it's DC via a bridge rectifier, some chips and a capacitor at the back. In my experience the longest lasting and most effective is the first form. I have had around 4-5 LED's fail via an LED diode burnout, and all of those have been the second high voltage type that have burned out. Thus I now prefer to stick to the drop down voltage ones that use transformers and then use just a couple of higher power LED diodes (such as a few 1w ones).

[@jyvben1520]

The Lotus Santa caramelised biscuit is a Saint Nicolas figure, who normally arrives from Spain by boat to give the children their gifts on 5/6th December (Holland/Belgium)

[@mlenstra]

Jyv Ben *december 5th (in NL at least)

[@jyvben1520]

@@mlenstra ok, he must need the time move south i guess ...

[@mlenstra]

Jyv Ben he actually died on December 6th, so the Belgian celebration kind of makes more sense. The Dutch are just impatient I guess 😆

[@fiskurtjorn]

​@@mlenstra In fact, the 5th was the night children put their shoe in front of the fireplace. 'Sint Nicolaas' then put a present in the shoe for the little one to find it on the morning of the 6th. As traditions change over time, placing the shoe 'schoentje zetten' became custom a few times in the two or three weeks before the 6th, and the night of the 5th went 'pakjesavond'

[@kilimadalin]

@@fiskurtjorn we have something like this in romania with candys in boots on the night before 6th of december in romania too

[@ChrisCoulson]

9:28 "I could sell that on eBay as art" - but you'd increase its value by several orders of magnitude if you taped a banana to it

[@Maintenance_Mark]

did someone call TJ?

[@raymondmucklow3793]

9:35 "iceberg lamps" that's brilliant 😂. These are more like the lamps I get from walmart. Great Value brand. I haven't had a Phillip's apart yet. I have the dimmable setup in living room. If the lamp has ben run on high for a while then if I dim it down it will actually cut off, for a minute. Then light back up, after a few minutes, that's the heat regulation right, that's what I've always thought. Cheers from Kansas.

[@n1elkyfan]

Making those lower wattage would be perfect for one of those bathroom vanities that 3-5 lights at the top.

[@randomnumbers710]

I don't know a damn thing about electricity but I love your videos lol

[@Ultrazaubererger]

@Mai Mariarti Better get some metal Chopsticks, they work way better for sticking into outlets because they actually fit in there. If you want, you can lick the chopsticks after sticking them in if you are still alive. Just in case someone doesn't get it: Its a Joke don't do it!

[@Screamingtut]

Clive, the hat is also used for Bishops in the Catholic Religion. that image I think is supposed to be St Nicholas of Myra? he was a Bishop of the ancient Greek maritime city of Myra in Asia Minor during the time of the Roman Empire back in the early 4th century. born March 15th, 270 AD Died Dec 6th, 343 AD.

[@MrFlint51]

This type of hat is called a mitre. The shape give its name to the mitral valve in the heart.

[@ducomaritiem7160]

Yes, it is the Dutch "Sinterklaas", also known as the Bishop of Myra. He used to have a servant, "Black Pete" ( Zwarte Piet), but protest groups in the Netherlands ( Kick out Zwarte Piet) managed to kill this tradition recently. It seemed a very "racist" thing to them.

[@beatsinabar]

Santa Claus = St Nicholas, who was a Bishop, later dubbed by The Beach Boys 'Little Saint Nick'.

[@JasperJanssen]

Duco Maritiem zwarte piet is still around, he just isn’t depicted (in the mainstream celebration) by guys in literal blackface any more.

[@Cadwaladr]

I like how Saint Nicholas (allegedly) punched a guy in the face because he said that God the Father and Jesus were only made of a similar substance, not the same substance. This is called the Arian heresy.

[@mattfleming86]

Question for you Clive: Seeing as all lamps but the Dubai lamps are engineered to fail quickly, what would be the feasibility of designing a lamp-holder extension to modify the incoming power, for the mass market, in order to keep these bulbs running cooler and give them a slightly lower output but a longer life? Extensions already exist for switching, recepticle addition (U.S. crazy deathwish stuff), bluetooth switching, etc. It seems that it could be done in a smallish package. Thoughts? Also, if you could get a chinese manufacturer on board- there would be a market in "Big Clive Forever Lamps" and most, myself included, would pay a premium for them. I keep looking for some to modify with which I can replace the cover but no luck yet.

[@bigclivedotcom]

Have you seen my dooby lamp video? It shows a hack to reduce power externally on many lamps.

[@jlucasound]

@11:06 and @25:59 (Over the Poundland PA System)... "Attention all Associates! Big Clive will be coming to the store to buy all the LED lamps! Clear the shelves! Clear the shelves! This NOT a Drill!!". ;-)

[@spacemanbowkonami]

Next to the general thumbs up for Clive and his need for ripping stuff apart, this time a double thumbs up for the product placement of cuberdons! Geldhof makes the best ones 😀. Tip: try to get them as fresh as possible (as in: get them locally near the factory 😉)

[@TrollFaceTheMan]

Clive got a question, do you actually trust Dollar lights like these in your house? In the US we can get decent brand name LEDs for around $1.30-$1.50 a bulb. Which would be close to a British pound so theoretically your Pound Lights might be the same quality. But our Dollar Store light are equivalent of about 0.75 British pound and I have a hard time trusting their quality. Even the brand lights I've had quite a few failures with flickering or just going out all together. I worry much cheaper and something may be likely to catch fire...

[@bigclivedotcom]

Poundland is good in complying with British electrical standards. But nothing is quite as fire proof as the old glass and metal lamps.

[@TrollFaceTheMan]

@@bigclivedotcom, thanks for the reply. This is true but unfortunately they are power hogs also. I actually did have a regular 60w bulb at one point short somehow and melted the glass. No clue how it happened, wish I kept the bulb. Was many years ago though.

[@jkobain]

That's Clive. Always good that you exist!

[@jasonc3a]

"Does he leave gifts for children and then touch them inappropriately?" Well damn. Now the rest of the day is basically a wash because I know that nothing will top that.

[@Herr_Bone]

Jay Cee , yes, exactly, although my first laugh was when he said:“Uuhh, it‘s tight in here, hmmm“.

[@Kineth1]

Well, you have to figure something is up (or the Mrs. is a frigid bitch) since Santa Claus comes only once a year, and it's on the night that he spends out of the house.

[@davidmcgill1000]

He sees you when you're sleeping. He knows when you're awake.

[@GothBoyUK]

Clive can only begin to understand how much pleasure it gave me to see a professional be as haphazard with his soldering as I am. I always thought I was shamefully bad. 😂

[@TomCee53]

You’re assuming he’s a professional. 🤓🧙🏼‍♂️

[@jkobain]

03:17 - So on the first day of Christmas Blizzard gave to me A nice shiny L-E-D!…

[@klausnielsen1537]

Nice diy mod. If I find similar bulbs here in Denmark I think I would want to make them about half the wattage. I find it disconcerning that led bulbs only lasts one to two years on average for us. Thank you for sharing. Keep it up.

[@johnpeacocke2112]

I use a good few GU10 LED lamps of various makes. My experience is that ventilation (cooling of the lamp enclosure) is the life limiting factor. Small metal bell shaped hoods facing downwards are very prone to overheating the GU10, and where there is good airflow the lamps seem to last much longer. The LED Cobs will last 1,000 hours, true, but the power conversion components are the weak spot. If the rubber sucker tool is mislaid the GU10 can be a curse to remove.

[@hernancoronel]

At 5:40 I would say that they could use different LED brands/providers and make them compete while using the same circuit and maximizing their profit! Great video thank you Clive!

[@Petertronic]

Adrian Black's channel is great 👍👍

[@avejst]

Great teardown Great design, love to drive LED via currently drive Thanks for sharing👍😀

[@KarldorisLambley]

one of the proudest moments early on in my learning about this stuff was finding a black spot on an led in one of these bulbs that had failed, winding thin wire around the led to short it out and bringing the bulb to life! saving one pound in exchange for massive fire risk didn't seem worth it in the end. but anyway, it pleased me.

[@jakeblanton6853]

I've found that chucking up the bulb in a small lathe makes disassembling the LED bulbs a lot easier and cleaner looking. I only disassemble them to see if there are any parts that can be salvaged after the bulb quits working. For the most part though, they don't tend to have any because most of the stuff is surface mounted and I don't have the patience to try to solder surface mounted parts.

[@ALKUKES]

I wander if i can send him a part see whats wrong with it pir sensor for flood light

[@bigclivedotcom]

If used outdoors, probably water damage.

[@ALKUKES]

bigclivedotcom its never used

[@GadgetBoy]

This is the exact light I wanted to send you!

[@maicod]

been a subscriber to Adrian Black's channel for quite some time already

[@sparkyprojects]

You could solder a couple of wires to the sense resistor connections, and insert a variable resistor drilled out the side (with a limit resistor) for a dimmer circuit ;)

[@BRUXXUS]

I'm still a little confused as to how it's achieving a voltage higher than the input voltage without an inductor. Is it using the peak to peak difference in the AC to boost the final voltage?

[@bigclivedotcom]

The peak voltage of the sinewave is approximately 1.4 times the RMS voltage.

[@BRUXXUS]

bigclivedotcom that’s kind of what I thought. Thanks for clarifying! :D

[@dangerotterisrea]

They really are getting a bit better then?? I do like Adrian he get almost as excited as yourself over these things bless him :)

[@johnrehwinkel7241]

I'm pleased by the plug-in electrolytics: since that's a part that generally fails after a while (even after reducing the power and therefore heat), making it simple to replace makes it a great candidate for a "forever bulb".

[@greengrayradio1394]

Interesting "self-preheating" of the aluminium plate to solder in new resistor! "Thar's hot-hot-hothot!!"

[@Tarkov.]

For some reason every time I click one of your videos I expect to have some profound realization. I usually just get to watch you break some junk, instead.

[@pey-yote]

Come for the circuits. Stay for the candy reviews

[@waynegubby2350]

I once did a bit of exploring inside a Status 9w globe and discovered the electrolytic cap was mounted on the same side as the leds and had a plastic base that circuit was a capacitor dropper I believe.

[@JaniLintu]

Easy way to remove the "screw housing" is to screw it into a lamp socket until it starts to tighten, then loosen it a bit and just pull so that the housing gets stuck in the socket and you can easily unscrew it.

[@frankowalker4662]

To me it looked more like an ice-cream cone than an iceberg. Brilliant hack. Good luck on monday, Clive.

[@Eis_Bear]

16:05 It's "Sint Nikolaas" or "Saint Nicholas" in English, it's basically the original version of Santa. The celebration is on the eve of his nameday (december 6th), mainly celebrated on a big scale in The Netherlands and Belgium. It came into excistence in the Middle Ages.

[@Eis_Bear]

@@TintelFruit That's the eve, his name day is december 6th

[@Eis_Bear]

@@TintelFruit "eve of his nameday" IS the night before, the "eve before his nameday" is pleonasm at best.. plain wrong at worst. Like how "christmas eve" is the evening BEFORE christmas.

[@IAdryan]

That 2 watts bulb will work for life. With that artistic plastic dome, i think it's worthing smething :)

[@markfergerson2145]

At 18:00 your line voltage had dropped by three volts as the load current had dropped by two milliamps. Coincidence? I think not! Replacing U1 with a pot (and series resistor) gives a dimmable lamp with no flicker at all. The knob would get rather warm though I suppose. And yes, I noticed the upper left LED was dimmer at the end of the video. Thanks for explaining that.

[@paulhudson9820]

there is definitely an AMSR element to Clive's audio delivery ... and he also know's his stuff...

[@jimbodee4043]

Love your videos doing this sort of investigation.

[@TrollFaceTheMan]

Another interesting video Clive, thanks.

[@richardwernst]

Dang, wish I'd seen this video before the one I watched yesterday and lamented on how difficult it was to disassemble. I'd have known what to expect. BUT, mine had a glass globe :) and there was some sort of silicone-like substance all within the lower shell and under the screw base. If I find another, I'll try dismantling it a little less destructively. Otherwise, mine is like the first? one that has transformer, etc. on vertical board that plugs into the LED panel. Now to go look up Adrian's video... :)

[@Yrouel86]

Another hack to these types of lamps could be to replace the sense resistor with a potentiometer and basically use the built-in chip as a dimmer

[@phillipsvanderwesthuizen800]

27 ohm for 240V vs 10 ohm for 110 V ?

[@harshbarj]

My solution to mod the 100w version was a bit more crude. The 100w version has two of these chips in them, So I ripped one out. As they run in parallel that effectively halved the brightness. I really wanted to swap the resistors, but my soldering iron is too weak.

[@the1trancedemon]

i have a 9 watt led plate. i completely removed the current sence resistor and it became a dark night lamp that provides just enough light to find my way around in the dark and not disturb my sleep. my style of tweaking components here is by placing it over a candle at reasonable height and then using a tweezer to remove things. then when soldering tiny things, i may mask the surroundings with some paper tape to not overflow solder in the surrounding areas. they also place these things over an iron and perform surgery.

[@Scrogan]

Following along at home, this is kinda fun! Though mine was using 4-chip LEDs, and a BP5131H. I intend on swapping out the ~5000K LEDs for 2700Ks and putting it back together. Maybe with a remote control circuit shoved in there, we’ll see. But since I can’t find any 12V 2700K chips, I’ll need to check that it won’t overheat and change the current set resistor(s) if necessary.

[@DamacusSquared]

I've seen self regulating ones where the light board only has the LEDs and resistors and the regulating circuitry is on a breakout board shoved into a slot under the board and down into the socket

[@alanottley]

Well done on replacing the resistor! My hands are to shaky to do that.

[@Bodragon]

(8:21) - I'm looking for the lumen output of that 10W bulb but I can't see it anywhere on the box. Is it on the back ? >

[@bigclivedotcom]

I've not got another one here to look. I'd guess the efficiency isn't going to be huge compared to premium lamps.

[@juweinert]

"I could sell them on eBay. As Iceberg-lamp" Since eBay sellers tend to watch bigclive, I guess it won't be long

[@RambozoClown]

Don't forget Electronupdate as well.

[@daraparsi]

The 27 ohm resistor may be used as inexpensive fuse specially when is covered by heat shrink .

[@paulstaf]

I use my hot air rework station when soldering on those LED boards. I put the hot air wand in a vise pointing it at the area I want to solder on and then use a regular iron to do the soldering. Or, I use a Weller soldering gun that goes over 200W.

[@Mark1024MAK]

Dave Micolichek - TARDIS...

[@NOWThatsRichy]

I wonder if this new circuit design will last longer? I've had a few of the 'Electek' branded ones, which have only lasted about 6 months, with daily use in a table lamp. A while back, when I was in 'Home bargains' (in the UK) I was looking at their 'e-luminate' branded LED lamps & spotted some 9 watt 'Daylight' 6500K versions, which I thought I would try in the porch light, once the existing CFL lamp expires, I'm still waiting - that GE stick CFL has been in nightly use for the last 15 years & still going strong! Must have done well in excess of 50,000 hours!

[@rich1051414]

"Dollar store" confusingly, just means "discount store". "Dollar tree" means everything is a dollar. Confusing as hell for foreigners, but there you go.

[@doncooper3946]

vs - PoundLand! :) I actually had to process that name for a few cycles!

[@xenonram]

@@doncooper3946 What did you think it was? A 1980's term for sex? "Ima take her to pound land tonight."

[@vgamesx1]

@@xenonram Imagine for a moment that you've never heard the word pound being used for anything aside from a unit of weight and therefore aren't familiar with the name PoundLand. Yeah, it's easy enough to figure out what it is after a few seconds but it's not as if everyone in the world just automatically knows what PoundLand is...

[@RFC3514]

> Dollar tree" means everything is a dollar. Confusing as hell for foreigners Tell me about it! I went looking for them in a forest.

[@Gammix]

Don't forget "Dollar General" to add to the confusion

[@petersage5157]

I suppose these current regulated lamps are good if you're going to just whack them into a socket and use them at their rated power. Those of us who want to run them at lower power find them a bit troublesome, as I've mentioned in comments to another video. 26:30 Wouldn't the hot air gun on your Yihua soldering station have made this a helluva lot easier?

[@bigclivedotcom]

The lamps with simple linear current regulation are perfect for use with a series resistor or capacitor. The onboard current regulator will just never need to regulate the current itself.

[@theR6969]

You don't have to heat the board to solder on it. I use these boards to drive the LED strips used in florescent replacement LED tubes. I solder on them with my cheapo 60w Amazon iron.

[@GiBBO5700]

Your soldering gives me anxiety lol love the channel

[@adenanthony5257]

Great vid as always Clive. Also loving the rave caused by video fuckery on your voltmeter

[@lorriecarrel9962]

I have learned so much from your content,thankyou

[@eyeopener1993]

How do I send you bulbs mate there is a place near me that sells 16w maxim bulbs just like these there are pretty big as well and I opened one and it had 3 capacitors a coil all sorts I don't know what there is but would love to send you one to look at thanks.

[@AndyHullMcPenguin]

B&Q are currently flogging off a bunch of lighting items, including a 20W circular ceiling fixture for six quid (was thirty allegedly). It has a separate PSU and a built in dimmer feature. Power on.. full brightness. Off and back on quickly.. half brightness... off and back on again quickly.. low brightness. I bought a couple to make in to portable spot lights. If you are near a B&Q you might want to take a look.

[@mentatphilosopher]

The biscuit has a miter on but they got the crozier wrong. Santa in some cases was a bishop but a bishop’s crozier should open outwards, a crozier that has its hook opening inwards designates an abbot.

[@drelectronics13]

Hey clive pls will u reply my one question. Plsss, I made ir remote controlled using standalone Atmega 328 pu microcontroller which controls 8 relays but 1 relay connected to AC fan which after switching on it makes all relays turn off it's like it get reset to off positions. What should I do to avoid this🙄

[@haraldlonn898]

I would like to know how much RF interference these different lights give. The smog produced by different lamps means that radio equipment does not work well.

[@Enjoymentboy]

Is using a capacitive dropper more of a european thing due to using 240V? I've gone through a good number of various led lamps and I have never seen one being used, being in Canada and on 110v .

[@bigclivedotcom]

They are better suited to higher voltages and lower wattage lamps.

[@rpbajb]

I love this hacking around impromptu work. I've been doing the same thing myself, with limited success.

[@statusquo9520]

Dissasembled with you very similar 8.5W from Osram [ LED Value Classic ]. Oddly enough it has no visible flicker (tried camera test too) The chip used is BP5116, voltage across the cap is about 600V, killer, with those rods sticking so high reminds me of shocker. I call that bulb pingpong, it bounces back when you throw it.

[@GothBoyUK]

The 'Santa' figure is Saint Nicholas (to Anglicise his name) wearing his Bishop's Mitre. He is one of the 'original' Christian winter figures associated with Christmas before Thomas Nash re-designed him as the more secular & family friendly Santa Claus we are familiar with. 🤓

[@EricWillis77]

It’s Thomas Nast for those who want to look him up.

[@gregorythomas333]

Pope Santa...leaves gifts for children before inappropriately touching them Big Clive owes me a new keyboard because sprayed coffee is not covered under warranty :)

[@jakethejeweler3092]

Completely unrelated question here, if these new German submarines use new electric cells to power the boats keep mechanical noises at a minimum during their operation doesn’t that high voltage used create a frequency? If an opposing navy wanted to detect them could a device be made to detect those extremely high electric frequencies?

[@Darryl603]

Hey big C, do the bulbs use the same circuit if they use 110v rather than 220v? Thanks

[@bennylloyd-willner9667]

@12:50 "zero as multiplier"... ... that results in a short circuit at 0 ohm😜

[@peterzingler6221]

Was this recorded at night? The mains voltage is quite high

[@bigclivedotcom]

Most of my videos are recorded late on.

[@PedroDaGr8]

I am guessing the 'papal Santa' is St. Nicholas.

[@jkobain]

Papal Santa? It's literally a «saint» from Vatican, I think.

[@twocvbloke]

Here's a thought, if you wired in a variable resistor to that programming resistor point, would it make the bulb dimmable, even if it'd be at the bulb rather than the lightswitch? :D

[@MrDunk66]

Clive, how much do you pay for these bulbs? Dollar shops in Oz don’t carry anything like these in my area.

[@wallyman292]

Your "Pope Santa" question about children got a chuckle out of me! Doubt the Catholics find it as funny though. . . ;)

[@mcomiskey7]

We do.

[@mcomiskey7]

We do.

[@Bodragon]

(3:10) - 12W perhaps? 12 x 1W LEDs ? It does actually say 12W right there in the centre of that circuit board. >

[@GrahamStw]

As any bigclive fan knows: what cheap electronics _say_ and what cheap electronics _do_ are not always the same thing.

[@andyischillin6724]

I’m just wondering. Would it be possible to solder another resistor in parallel to achieve the desired resistance?

[@bigclivedotcom]

Lowering the total resistance would increase the LED current.

[@andyischillin6724]

bigclivedotcom Firstly thanks for replying, I feel honoured. My maths isn’t so good, but what I meant is 2 resistors to achieve 100 ohms...no idea if that possible

[@bigclivedotcom]

@@andyischillin6724 Adding another resistor in parallel will always lower the total value. It would have been nice to just add another in the vacant space.

[@andyischillin6724]

bigclivedotcom Thanks again...that’s that query resolved Love your channel 👍🏻

[@fourdee4d]

247.5,V input intresting. Isle of X have less issue with voltage drop/loss. High eff?

[@bigclivedotcom]

I'm quite close to the substation transformer.

[@michael-gary-scott]

bigclivedotcom I heard they had to invest more in security when they found your channel

[@bigclivedotcom]

@@michael-gary-scott They had to fit bigger fuses.

[@Dusty-Builds]

I want to put 4' LED tubes in my RV. (The 120 volt ballast bypass type) Do you have an idea on how to rewire them for 12 volts?

[@bigclivedotcom]

They will be optimised for higher voltage. You'd be better using 12V strip-lights or putting sections of 12V LED tape in existing lights.

[@Miata822]

Great hack. I've got to give it a try.

[@jamest.5001]

I had a dollar tree led bulb last just shy of 4 years, being in 24/7!!..

[@mouse454]

Those current regulator chips have been on high wattage panel lights for two years or more. The higher power gets the new (expensive) chips.

[@fjh89]

In what printer do you print those close ups? I've always wondered that.

[@bigclivedotcom]

Epson eco-tank on pound shop / dollar store glossy paper.

[@fjh89]

@@bigclivedotcom Hey clive! thanks man, I'm always amazed you go 'let me take a picture' and come back with such awesome looking and high-res pics.

[@shuriKen469]

we've come a long way from filament. are there more advancements in lamps/bulbs to come? or are LEDs as good as it's gonna get?

[@bigclivedotcom]

This is about as simple as it could get. It's possible that they might evolve into a flip chip panel like the 50/100W style "driverless" LEDs did, but that might end up costing more due to the larger area of phosphor loaded gel. So maybe the discrete LEDs will be with us for a while.

[@selkywaters]

I guess continually teleporting tiny amounts of Star plasma into a vacuum tube is quite a ways off....

[@natecontarino1748]

I'm working on a way to separate my light being from my body to light my room. Just need a few more tibetan bowls.

[@tretronthedragon]

Basicly every dutfch person shouting at their screen: "that is not santa!'

[@Seegalgalguntijak]

It's always funny to see everyone wanting to change LED lamps into low power versions that barely give out enough light to see anything, while I always said that a lamp couldn't be bright enough. Well, now I've found a lamp that is not just bright enough for my liking, but even a bit too much: it's an Osram E27 lamp that draws 21.5W and supposedly is as bright as a 150W incandescent. Together with another E27 LED from Philips that draws 18.5W and supposedly is as bright as a 130-140W incandescent lamp, I used both to light up my room and my desk (both pointing towards the ceiling and indirectly lighting it). Those were now replaced with 2 other Osram LEDs that draw 14W each and are supposed to be as bright as a 100W incandescent, and that's now what is bright enough, but not too bright either.

[@markiangooley]

Dollar Tree here is still selling only the “60W” (more like 8W actually) LED bulbs with only a capacitive dropper. I hope the newer-style bulbs make it here. The “75W” ones (10W or so) have shown up on KZbin videos but not in my local stores at all...