Don't use gunk engine degreaser until you watch this /gunk heavy duty gel/how to degrease engine bay

Gunk engine degreaser: amzn.to/3zUi7NZ
Dont use gunk engine degreaser until you watch this bc for some people this not gonna work, specially a heavy baked oil that been sitting for years,
so in this video we gonna answer: do engine cleaners work ???
So, gunk heavy duty gel worked well with degreasing light oil and removed some sledge, remember i used only one time and only for 15 minutes, you can try it for longer time and twice and you will get better results
this is one of the best and easy ways for degreasing engine bay nad how to detail engine bay if you had engine leak before and wanna clean the engine to notes if you had new oil leak
Gunk engine degreaser Provides three types of engine degreasers for different level of application and how bad the engine dirt is, and one engine shine
🔔 Hit the bell next to Subscribe so you don't miss a video!
👨🏻‍💻 Watch my newest video: www.tubebuddy.com/quicknav/latest/UC2lUGn7VN0u3U_M4RSmjQHw
Follow my Instagrams so we can be best friends
-------------------------------------------
/ ali_mechh
/ alimechh
Like my facebook page:
-------------------------------------------
/ alimechusa
**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
Gears I Use:
Canon M50: amzn.to/2PXVVwO
Dji Ronin sc Staiblizer: amzn.to/3iIqxPc
BOYA Microphone: amzn.to/320Oydx
gopro hero 8: amzn.to/3g8BKH3
Gopro Max 360: amzn.to/345NNTf
For contact
email address: [e-mail]
Facebook account : www.facebook.c...
Like Facebook page: / alimech-1296961967080160
Follow me
Instagram: ali_mechh
personal Instagram: alimechh

[@mikerowland1701]

Good video man! People will always complain. Atleast you have the testicles to make a video, when they don’t.

[@AliMECH]

Thanks mike, yes I know, it's ok no matter how good the video, someone always complain

[@erikrivas9300]

Well said

[@AliMECH]

Thanks

[@kennethrisner8648]

pretty good job over all. top part of the engine looked excellent. even the bottom would looked better if you had used the rest of the can on a second application on those couple small spots, and let it sit, a half hour instead of only 15 minutes

[@AliMECH]

Thanks for watching 🙏🏻

[@allenexel4831]

It says to use little water as possible not to use a power washer

[@idkid78]

Lmao

[@LemonySnicket-EUC]

It's fine as long as you don't get close up with the spray stream. I've been doing it for 35 years. Never an issue. Of course common sense needs to apply.

[@shaneintegra]

DO NOT HOSE YOUR ENGINE DOWN WHEN HOT. the quick temperature changes can shock metal or plastic and crack... Also in some situations it can cause a vacuum effect of certain components... Pulling water into it.

[@PhOeNiXpIoLe]

I’ve never had a problem with cracking metal or plastic but leakage into spark plug wells yes

[@REPORODGE]

I cringe at the high pressure in the coils!

[@69taint]

Bro i was having a heart attack

[@hadilhussain2070]

😂😂

[@AliMECH]

Lol, for ur information, coils are waterproof 😅

[@LemonySnicket-EUC]

What happens at 75mph in the rain ?

[@REPORODGE]

@@LemonySnicket-EUC you get wet?

[@cabininthewoods7326]

I think the results on bottom might have been better with some agitation. Soft bristle brush

[@AliMECH]

Yes of course, I wanted to see how it works without any help

[@owl1873]

Nice job on the before and after. Seems to work ok, I'd probably leave it on a little longer. I'v had really good results using a product called Awesome. I also like the Gunk Citrus Degreaser.

[@AliMECH]

Yes, i agree, leaving for a long time will penerate more

[@TadashiYasahiro]

L.A.’s Awesome is great on a lot of things!! Bought it for my engine cleaning too

[@tammurney3053]

Try using a hard bristle brush to agitate the oil and dirt before pressure washing for the best results

[@leomedrano3332]

Which Awesome product are you referring to? As they have lots.

[@TadashiYasahiro]

@@leomedrano3332 it’s the yellow spray cleaner you buy at the dollar stores. In an opaque bottle. But I usually just spray it, on wait 5 minutes. Scrub lightly with a nylon bristle brush and gently hose off... wipe down with a microfiber towel and boom, like new

[@DTUFINOPhotography]

I'm afraid of pressure washing my engine... lol kudos to you.

[@papo862]

Its not just spray and rinse you have to use a brush, it'll come out much better

[@huahin6149]

I wonder If you pressure washed first then dry rent they gunk

[@fantonio234]

You’re better of spraying brake cleaner, scrubbing by hand and after wards just a slight pass of the pressure washer maybe

[@southothehighway]

I love the gel. That way I can scrub from underneath and it doesn't drip on me.

[@dukeman7595]

NO , and never presure wash the engine, you will destroy the electrical components!

[@huahin6149]

Cover them and avoid

[@PappysCycles]

You can, but cover the alternator

[@josearana7704]

U can pressure wash an engine just not to close like the guy on the video did

[@FrancisRalphPerina]

Already done it a hundred times just cover the ECU and avoid soft connector or replace it it's cheap🦾

[@terried4648]

Seem to work going try on 2001 dodge dakota

[@AliMECH]

Awesome 🙏🏻

[@martynh5410]

Thanks for the video. Going to clean up a greasy/oily old BMW today!

[@AliMECH]

thats great

[@h2oman421]

What happens to all of the oil? Where did you do this? Is the oil all over driveway? Going into ground water? I’m trying to figure out best place to do this

[@romangervaise35]

washing station, or big parking lot, they have hydrocarbon separator before water goes to the sewage (at least that's the case in France), search for what the law says in your location

[@tombradysr.8048]

Police station parking lot is best

[@Wilcoranking]

@@tombradysr.8048 😂 😜

[@Mghanabro]

Is gunk safe on car exhasut catalytic converter i think it will damage

[@paulm283]

I can’t tell if it works but I’m thinking it might be necessary to repeat the process, not unusual for dealing with engines😂🎉

[@juanramirez5817]

It’s only like 5 bucks I use it on my tractors and works great

[@AliMECH]

Yes, better than others I used before

[@sojiroumakairyu5143]

idk if id use the green tip tho

[@cherokeeoff-road2158]

Fr risking riping hoses or wires

[@UFGator1972]

Pressure washing an engine is something that experts do not recommend. I wouldn't do it because it is hard to control where some of that water is going to end up.

[@jonagarcia4677]

Hello, would this product help clean off engine cleaner from my wheels? Older brother accidentally used it on all 4 wheels.

[@gauravsharma3400]

Which pressure washer are you using ??

[@kabileshr4461]

Kerosene is also a very good degreaser

[@raedhosny8828]

Will hurt any plastic parts

[@GregRickard]

ai use a garden sprayer instead of hose. the ones you pump by hand so the pressure builds inside.

[@itsdimitriymedvedyev]

I bet if repeat process 1 or 2 more times with an old toothbrush it might help a bit more or probably mostly ideal when plan to sell car :)

[@donsixpack6779]

I have an old shotgun brush that needs a new purpose in life

[@MW1_2_3]

I used the one for Heavy w GEL. My engine still smell like this crap that enters inside my car. Must be something better than this smell. 4 days of smell. Applied as directed.

[@crazycat350z]

GOOD BY ELECTRONICS

[@ancientdiscoverys]

Can i use this product to clean underneath my car like for exhaust pipes and mufflers ?? Will it make rusting worse ?

[@AliMECH]

I don't think it will benefit you, because it will only remove oil from engine, dirt will be so tough on exhaust pipe, I don't think this will clean it

[@lookatmr.lipkiss3349]

Sometimes having grease on metal parts is good, it helps to prevent rusting and striping them over and over again would bring more rust

[@AliMECH]

Most cars engine block aluminum now days, 😉

[@PolecatCreekGarage]

What if your painting

[@kfelix2934]

oil and grease draws dirt and if you have oil and grease on you engine it typically means somethings is broke and leaking. If you did remove it, you will not be able to readily identify the broke or leaking part. Just a different angle to look at things.

[@kfelix2934]

@Helpontheway Not sure what you mean by diet. We do the same here, driveway/bay is always dirty. So we throw down a wood plywood board and park the truck in the same position. if you see a drip stain developing, then you know or have a general ideal of where to look at & for the leak. I'm doing that on a silverado 1500 and found the leak is the hose or possible crack in the coolant reservoir. I've just been lazy ordering the little preformed hose fwiw ;) All of my tractors leak diesel or hydraulic fluid, but the cost of fluid re-tops off is over all cheaper than trying to source or find the part and doing the tear down ( labor ) so I just keep extra fluids available ;)

[@devonbaker8901]

Exactly lol that’s my thoughts but it is nice cleaning the top of the bay atleast not pressure washing a engine ever in my opinion I just wouldn’t do it

[@kylekosztyo4767]

Did about the same as simple green in a sprayer. Purple power works awesome use straight and let sit. Never look back lol 😆. Do this more often and fix your leaks clean forever lmfao 🤣.

[@منوعاتالميساني-ر5ز]

ما اسم مزيل لدهون

[@sakoslap2360]

Wait where are u from

[@davepuffett8608]

Needs to be agitated with a stiff brush after 10 minutes soaking! Better eults! 😊👍

[@AliMECH]

You are right!, but i did exactly what it says on the can

[@mikegarcia5330]

I'll buy two cans and then do one wait for it to dry and then do the second

[@AliMECH]

Let me know if it give you better result

[@chriskim7642]

That was pressure washer work

[@Englandsbestlover]

Expensive way to clean your engine. Any degreaser would do that for far less.

[@AliMECH]

I will test some other brands soon in the future videos, but this one worked good so far

[@LemonySnicket-EUC]

It would be awesome if you would recommend a cheaper product.

[@dannythomas7902]

Do it 8x

[@Resolute900]

Good job, but that water all over the electrics.

[@AliMECH]

Dont worry about it, its water proof

[@Resolute900]

@@AliMECH hahahaaa..im sure the Gunk can is.

[@kenzotokyo2920]

Hey man I got golf gti mk5 2005 and how do I remove carbon build up

[@AliMECH]

I have some videos cleaning with steam, seafoam, and carb cleaner, so look which one you choose

[@nicholassharp8691]

Use berrymans b12. Stuff is great.

[@raymondrodriguez5068]

Gel? Half of if felled to the ground!🙃

[@mahdifeyli7860]

0:23

[@andresrodriguez1585]

En espanol

[@s200029928]

No worth the money

[@wesleyarnold6018]

Good attempt. Apparently it will work. Lmao! Follow their ( specific) instructions man. It will work much better. The biggest pain is Should cover the Wires, sensors , intake and electrical components like the Computer under hood Next Apply GENEROUSLY spray a can or 2. MSN. Next after waiting the 15 minutes. BRUSH the heavy spots to break it up. Next. Rinse all areas with a FINE stream of water from top to bottom. I emphasized their Wording because They only tested product to be effective Exactly as they say to. Any deviation equals no good results. Assholes I know. Man. Do that crap exactly as they say and it will clean hell out of it.

[@lookatmr.lipkiss3349]

Using a pressure washer on a engine bay Good luck with it

[@jackdorazio_6073]

From a distance it’s fine but i guess he wasn’t doing that

[@AliMECH]

For the lower engine, there is no problems, there is not much of harness connectors

[@PolecatCreekGarage]

You’ve never worked on cars then