just some thoughts on how quick the costs to repair on a cheap bike add up.
Пікірлер: 45
@BagpipekilR Жыл бұрын
Owner of a 2000 SVS here. Love these bikes! But the sad fact of the matter is 95 percent of these are owned by first time riders and they beat, neglect and crash these things in their learning process. So much potential in this platform tho its really a shame so many get put through the ringer and destroyed. Wish I could find another clean specimen to build a full out race bike out of... thanks for the video brother stay safe out there 🤘
@Mad8vCycles Жыл бұрын
yep, like miatas where they're all rusty or crashed :( tbf this is why i can have a workable partout volume though (cheap junk bikes and decent demand for parts)
@ralphvalkenhoff28873 жыл бұрын
Thanks again for making a great video. Just stick with the sv’s. There’s so much to know about them. Do a video on R&R a motor. Or upgrading suspension, or dicking around with the computer. Now that would be awesome. Valve clearance and adjustment, etc.
@umerk817710 ай бұрын
Buying my good used bike as soon as I find one - this video has helped me a ton. Gladly subscribed and liked. Thank you so very much for this informative video.
@slumericanontherise74343 ай бұрын
I think you saved me a bunch of headaches and money. Thank you!
@wilmawife2 жыл бұрын
I was given an SV650S free !. When it was sorted it cost me the same amount of money that I could have bought a good running bike.
@Mad8vCycles2 жыл бұрын
often the case heh. pay over time or pay up front and just go ride...
@fuglbird2 ай бұрын
Thanks for the good advice.
@assassinate99993 жыл бұрын
You can buy used SV650A Gen 3 2016 - 2019 in Thailand with 3,400 USD, under 10,000 km. used to run.
@j.alejandrofuentes68162 жыл бұрын
And how much does a normal everyday citizen make a month in Thailand???
@urbanjunglerider92293 жыл бұрын
yeap, good advice on buying used bike! thx! anyway, can you review that crossplane? i used to have one - 09
@Mad8vCycles3 жыл бұрын
it's gone now (my friend sold it) :( but it was an excellent bike and i want one
@Saiun952 жыл бұрын
had a ktm 390 and these engines usually blow up before you can even get to a crash hahaha sad to see these sv 650 get handled like that by their previous owners but thats what you get when you build a bike with durability of a cockroach lol
@Mad8vCycles2 жыл бұрын
Klr is another one thats like that heh
@namelesssnitchy2 жыл бұрын
my gs500e frontvorks are also not straight but riding with it for 10 years now. but just commuting not racetracks hehe
@Mad8vCycles2 жыл бұрын
Having owned a gs500 as well i dont think ANYTHING could hurt that bike heh
@namelesssnitchy2 жыл бұрын
@@Mad8vCycles hahahha true. I might gonna keep it for another 10 years lol 🤣
@steviepee3 жыл бұрын
I took a minor hit a while ago, front end I thought was ok, but when I changed the fork springs and oil recently I noticed one stanchion was *slightly* bent, ever so slightly. It rides ok but I DO have a replacement stanchion to fit very soon.. question is, how can I tell that the triple trees are ok? Can I take them off and measure them somehow?
@Mad8vCycles3 жыл бұрын
Easiest way is to slide both forks in at the same time. If they both slide in smooth it's straight. The other thing to check if you have the forks out is that both the lips are even where the clamp bolt is.
@steviepee3 жыл бұрын
@@Mad8vCycles appreciate it!
@blixxy13202 жыл бұрын
Is your sv a red 2017 ?
@steviepee2 жыл бұрын
@@blixxy1320 It was when I received it 5 years ago. Changed it to Storm Grey soon after. Also it’s a K5 (2005).
@KnightZ33 Жыл бұрын
at this point im not even sure if i should keep it or sell it. The tank is all rusted up inside, i replace the fuel pump with an aftermarket part. The previous owner left it outside for 4 years. i replaced the pump because i was getting a whining noise. The whining noise is coming back, what would be the problem?
@Mad8vCycles Жыл бұрын
it's probably sucking in new rust...
@alvinrivera767 Жыл бұрын
Idk all about that I got really lucky and got mine for $150 not in good condition tho but fixed it up for 1,000 and runs great and the engine only has 520 miles
@Mad8vCycles Жыл бұрын
If you are mechanically inclined and spend a bit of money, yeah anything can be ok. There are a lot of guys though buying junk and running out of tallent
@irocss856 ай бұрын
This video was made directly for me. Lol. All very good points. Also good for buying some one else's project bike to finish. My project is " finished" but it's not because 1st and neutral are wonky. Hard to get into at times. Some wear on those parts some where in there now I'm contemplating tearing down the trans gears/case or swapping the engine. But i just wanna ride it.
@ebrammer25253 жыл бұрын
No mention of unobtanium first gen N gauges or first gen N gas tank? I know I've bought at least one set of gauges from you when I had my SV!
@Mad8vCycles3 жыл бұрын
tach cover is fucked up... tach sticker is melted. tank... unknown yet, need to open it (jammed shut) and see if it cleans up
@Mad8vCycles3 жыл бұрын
err, wrong video... thought i was replying to the 100k sv video. yeah i should do a separate video on parts that are uncommon or expensive
@jpuggz9 ай бұрын
I replaced the starter motor, battery, solenoid, and still can’t get the bike to start. It just buzzes at the solenoid and drains the bike dead. I tried it with 3 separate batteries. All good. I unplugged the stator and regulator and tested and it’s still draining. I’ve unplugged almost every socket on this bike and I’m at my wits end. This video is quite fitting. Arghhh
@Mad8vCycles9 ай бұрын
What happens if you go directly to the battery w the starter wire? Is the starter jammed or is the motor seized?
@JoseVargas-vp1ovАй бұрын
I have a 2003 svs650 and that happens to me I check every single part of the harness and nothing. Then someone told me check the cutoff switch. When I used to press it the next day it was dead. If you still have the bike check that out. Good Luck
@t-bone9403 Жыл бұрын
the frame was not welded from being wrecked. It comes from the factory like that.
@Mad8vCycles Жыл бұрын
With a crack in it? Watch it again, theres a crack on the outside of the weld...
@dp-kr7js Жыл бұрын
Did you smoke something bad?? Christ....
@jca110 Жыл бұрын
@@dp-kr7jsI need to find this man so I can sell him all my bikes lol
@slakk50932 жыл бұрын
There was a rvf400, been in a shed for 7 years. Talked to the seller, he said he pulled it out of storage and chucked petrol in it and a battery and it fired up after a few minutes of turning it over. I asked him did he change oil or prime the pistons with oil before turning it over, answer was no. Ok I'll give that one a miss then 🤦♂️
@Mad8vCycles2 жыл бұрын
I mean... it's a honda so it probably wouldnt care...
@slakk50932 жыл бұрын
@@Mad8vCycles true 😄 but the guy was asking a premium price so didn't want to risk it, also parts are not locally available and are very expensive to order from japan
@JoseVargas-vp1ovАй бұрын
I need the passenger seat. I was in the highway last weekend and it was a lot of 💨 wind, and a gust of 50 or 60 hit me I almost felt but when I look back to see if a car was coming just in case , and I saw my seat flighting out. I couldn’t go get because a storm ⛈️ was coming. If someone see this comment please hit me up.
@Mad8vCyclesАй бұрын
How lol, are you missing the grab bar? I have to check if i have one but i dont remember any listed on mad8v.com