First Move in 10yrs for this Komatsu Dozer

[@Charles-qt2gx]

I am impressed with the determination and lack of cussing. Keep up the good work.

[@larrybolhuis1049]

So when that thing dropped off the jack and you drove off I had a good laugh! Couldn't tell if you meant for that to happen or not but you looked surprised! LOL! But it drives so well done!!

[@williamkeen9947]

Wiley you amaze me in that you never give up

[@dilipkumaravichal5818]

Happy Labor Day Wiley and Jacob. Good work.

[@garymessina1609]

Great video thanks Wiley and Jacob

[@Ngarepairercar1990]

Great video, thank you for showing your perseverance in your work

[@SteveBrock-c7c]

If clutch is stuck aint it towards a big tree. Let it hit tree. It amy possibly free up clutch. I've done it before, it works.😊

[@andersjeppsson2456]

Good work. Have a nice weekend.

[@CharleyBrown-s4w]

Hi Wiley you’re getting there , when you depress the clutch fully there’s a brake on the prop shaft it just needs adjusting so that it stops The gearbox spinning and you can select gears, adjust it so that it’s at the very bottom of the pedal I doubt the clutch is stuck being an oil Bath clutch best of luck.👍

[@scpatriot5270]

Well done Sir i always enjoy your videos 👍🇺🇸

[@ralphriddle8864]

Very nice job and God bless y'all

[@kenburns4802]

Hello wily happy Labor Day your almost there I said it before you and my father are one in the same way to go love watching thanks for taking us along thank you ken

[@neiljenkins5213]

Wont take much now wiley you have worked miricals well done that man

[@codymccauly349]

Sorry I haven't watched your videos for a while

[@632Harrison]

Great job Wiley, you are truly a man of mine talents which only comes with age and experience. You have a lot of wisdom and I enjoy watching your adventures Thank you sir for all your hard work and I am looking forward to seeing your next adventure May God continue to bless you and your family always

[@JerryMcDowell-ex6rx]

Hey bro put a block under the jack good job you got it going

[@Klelack01]

Good to see y'all again for some reason I wasn't getting to see your CHANNEL.but all it's good now you definitely didn't lose your touch.ypu like it fell of the jack a the rite time.. Keep the video coming.God Bless.

[@Camden09]

Awesome video Wiley 👍👍👍👍

[@scottsinfl]

You got to have a driver, driver when you crank a tractor or a dozer and he needs to be in the seat. lol

[@user-if8nz2yo5n]

Major progress!

[@SteveBrock-c7c]

It's like setting the drag on your fishing pole.😊

[@jamesmccrary3468]

Wiley you are the man. I look forward to your next video.

[@edwincuchens3440]

As Matt from Diesel Creek says...a grinder & paint makes me the welder I ain't...lol

[@allensharlow7763]

Good job so far Don❤😎👍🍮

[@danielfontaine1880]

Bonjour bonne vidéo, et petite vue comique ; quand la machine a décidé de partir comme un cheval sauvage qui porte son cavalier pour la première fois ! 😁 bonne fète du travail a vous et merci pour ces super vidéos

[@SteveNicoson-u1i]

Thanks for another video on this older dozer Wiley. You got it running and the hydraulics working somewhat but now the cultch seems to not be working properly. Fighting you all the way it seems. Nice little machine but needs mechanical work to get it working again. Let us know how it turns out Wiley. Hang in there with it. Thanks Wiley for everything. The Iowa farm boy. Steve.

[@davidbarnes706]

I’ll be watching in the future to see it working

[@rodolfodeagostini1406]

Ótimo Willy, felicidades, Rodolfo Brasil

[@davida.p.9911]

Good job Wily! Sounds like the clutch could use some adjusting. Hope it's not worn, that means major surgery. Thanks for sharing!

[@dalehartley-vd9qo]

Good video Wily Happy Labor Day to you and Jacob

[@debcamp2359]

Good luck getting t freed up.❤

[@tommyhall2768]

Hellow Riley good to see you again buddy

[@hankstone8336]

Happy Labor Day Wily

[@nelsonmattoon150]

Nice welder

[@kenfrazier616]

hope it will easy to find the problem

[@kenfrazier616]

Wiley get a cheap 12 volt lic lack pump and pump fluid with it, Been doing it for years to transfer oils

[@richardmead9225]

The DC output on a welder is 36 volts. A generator welder on a pickup would give the ability to jump 24 volt engines. I used this method to jump a Hough loader. Really spun it over.

[@scottlambert2949]

Happy labor day wily and Jacob

[@royfigley2099]

I run a dp 31 and the park brake is the red 90 degree handle above the pedals. It will roll free

[@TheArgoguy]

There is bearing in the clutch pedal behind the fire wall that seizes the clutch pedal

[@mattthescrapwhisperer]

Ride em Wiley!

[@GlennGraham-q8t]

Put some Kroil oil on it 👍🇺🇸✅️💯

[@MattCoats-cy3yb]

There is a stop clutch brake band in front of yolk to stop drive shaft from turning to put in gear had to change mine cost 350 dollars

[@tommywilliams5135]

The pedals in floor are left and right steering brakes

[@kendrawilliams1348]

All that muffler needs is a can of black hi temp pant and it would be mint

[@SteveBrock-c7c]

Time for kreoil.😊

[@robertgorman5622]

Learning us them big college words 😅😅 apparatus

[@angussutherland7161]

hi wily i sent this before look up jeremy diy proud d20 steering clutches angus

[@dougjones9493]

The clutch disc is rusted to the flywheel

[@SteveBrock-c7c]

I like thing of my gig better.❤😊

[@rickeypender2662]

grind it till you find it

[@nelsonmattoon150]

They don't make it easy to get at