Scx10 2 cantilever suspension kit install!

Hi everyone I got my new Cantilever suspension kit from eBay installed on my scx10.2. So here is the how to install video for anyone that might help with the install. Also there is a short run at the end so everyone can see the suspension in action to! Hope this helps someone out there enjoy the video Everyone! 👊😃
Here is the link where I got this cantilever kit: www.ebay.com/i...
Here is the link to my Patreon pledges start at $1 please consider joining its a great way to help support the channel: / tjthercguy
if you would like you can follow me on Instagram here:
/ tjthercguy
Here’s the link to my new second channel Tj Crafted: / @noobydoobydoo420 \
If you would like to help support cool new builds and experiments on the channel please consider donating to our Paypal link here: www.paypal.com...

[@rodmoncrieff2290]

was buggered till i watched your vid. thanks bunches.

[@TJthercGuy]

No problem glad the video helped you out. 👊😃

[@bcochener]

Man it looks sick without the bed! Love that cantilever setup as well. Great vid!

[@DaveGlitchHare]

Thanks for this! Just ordered a set. I'm wanting to use it for my flat bed build.

[@DaveGlitchHare]

Thanks again! Just got mine, and you helped make it a smooth assembly.

[@divifo]

Great job looks awesome and run away unstoppable 😊👍👏

[@TJthercGuy]

Thanks for sure they do great. I gotta get the video edited up but took it out of kelly butte for a proper test drive. Definitely need thicker shock oil otherwise it did great. 👊🙂

[@RC-CARS-WORLD]

That looks awesome, great job bro 👍💪😀🆒️

[@verigone2677]

If you keep a pack of balloons around, you can use that between your pliers and your hardware to grip without leaving marks.

[@TJthercGuy]

True paper towels work to.

[@verigone2677]

@@TJthercGuy yes they do...the boxed paper towels are probably the best value tool in my shed

[@TJthercGuy]

@@verigone2677 for sure some shop towels are a must!

[@rccrawlerextreme]

Thks for sharing bro

[@DerekLed]

Looks great 💪👍

[@mrboat580]

One half of those links are reverse thread. You can determine which, with an M4 nut, if you can't see it.

[@TJthercGuy]

Thanks but I already knew that. That links are like that so you can adjust them without taking them off. 👊🙂

[@mrboat580]

@@TJthercGuy I put it there for those who do not, since there is no instructions, so that they won't mangle their links trying to put them together. Hint: You can chuck the hex in a drill and they will go right in. Just hold the Heim end with a driver thru it. After you get the one side on, chuck the rod end and everything in the drill and do the other side. It doesn't mess up the plastic.

[@pandroidigital]

Thank you! I was stumped lol

[@kilianbananensaft6468]

did you shorten the wheelbase for this body?

[@WolverineRC]

I know it's an old video but what driver set is that????. Good content brother. Watched a few vids now and subscribed

[@TJthercGuy]

@@WolverineRC Right on thanks and welcome to my channel! Diver is a starwars figure I found at a discount store. Not sure what character it is never really watched the movies or the shows. 😅

[@WolverineRC]

@TJthercGuy lol the screw driver. But the driver Is awesome too. I use marvel characters and Bob ross drives me ryft..haha

[@TJthercGuy]

@@WolverineRC Nice! These where just cheap decently detailed and the happen to be right size. 😂

[@jtmchannel7640]

Looks so good!! I just got my first 1/10 scale rig, and I’m stoked. It’s a og Scx10 with a rc4wd Chevy Blazer hardbody. The only thing I want to change, is to get some AR44 axles on there, the original ones are way too bulky.

[@TJthercGuy]

Right on the original scx10 is a solid rig. Some ar44’s with the universal front axle shafts are definitely a improvement. If you go for the axles housings on mine the ssd pro44 they have some weight low and slide good. 👊😃

[@jtmchannel7640]

@@TJthercGuy Sweet! Axles are just dang expensive haha. I’ll probably wait till the right time and find a used pair. Hit me up though if you end up selling a set 😁

[@throttlemoto3391]

Better than angled suspension?

[@TJthercGuy]

@@throttlemoto3391 Mostly just looks good, I wouldn’t say there is a huge advantage.

[@tobydyes]

There's a lot you can do about it like buy wrenches instead of using a pair of needle nose

[@kellykuretich6366]

😁😁👍👍

[@texasracingsindicate]

Flip Those they work better bro

[@TJthercGuy]

Thanks for the tip I’ll look into to. The suspension works well as it sits. The shocks just don’t have much dampening even with 50wt oil. Gonna try 100wt next time I have it out. ✌️😜

[@ezboyrc553]

How much is that kit

[@TJthercGuy]

It was $38.09 with free shipping on eBay. Links in the video description.

[@ezboyrc553]

Thanks can't wait to see it perform.

[@ChevyChaseR.C.]

My buddy accidentally ordered 2 sets...now I'm having to figure out how to install these on a scx10 lol basecamp lol

[@CheeZyNutZ]

The biggest waste of money ive bought for my crawler. Has almost ZERO flex. Where you adjust your links is the farthest point your axle will flex. It completely eleminates any sort of downtravel. Great install video, garbage product

[@TJthercGuy]

Weird I had plenty of flex and suspension up and down and up travel. 🤔