Door and Vent Window Install - 1966 Ford Bronco Restoration Project

[@bdhand6999]

Looks awesome Jason

[@JasonJonieBuilds]

Thank you!

[@normbrooks1488]

Wow Jason, that's all I can say! I'm sure you will have it ready for Cruisin' The Coast. You have three weeks. Great job as always!

[@JasonJonieBuilds]

Thanks Norm! Well, I don't think we will make that one but maybe the Emerald Coast Cruzin show in Panama City in November... Fingers crossed!

[@normbrooks1488]

@@JasonJonieBuilds After I wiped the drool off my face, I forgot to thank you for the heads up on installing the tracks for the glass. I have to do the same thing eventually. I bought all new internals also.

[@JasonJonieBuilds]

Lol.. well hopefully yours will go a little smoother than mine.

[@callofgeorge]

this thing is gorgeous.. absolutely amazing job.

[@JasonJonieBuilds]

Thank you very much!

[@haraldlorenzen4378]

I’ve been following this build from the beginning and I’m so excited to see it running. When I first started watching my wife was expecting our first child….now we have a 18 month year old crazy little girl 😂😂

[@JasonJonieBuilds]

Harold thank you for watching and congrats on the spunky little girl.

[@almullowney5230]

Absolutely beautiful. Great job and thanks for the videos. This will be very helpful when I’m at that stage.

[@JasonJonieBuilds]

Thank you Al. I hope it helps. We appreciate you watching.

[@almullowney662]

@@JasonJonieBuilds Are the 66 window regulators the same as all other years? Wondering if I can use regulators from a 73 for a 66.

[@JasonJonieBuilds]

@@almullowney662 I am not positive about that but I know I have a parts door that was a later model and the regulator would work. I think there might be a threaded hole in the regulator rather than using a clip to secure the handle.

[@livindalife5356]

Thanks for this video. I'm planning to replace all my glass so now I know it's not going to be a walk in the park. I can hardly wait to see your Bronco hit the road. It's going to be a show stopper!

[@JasonJonieBuilds]

Thank you. The glass replacement really wasn't that bad. Good luck on yours.

[@ninjasfanfunnystuff9026]

I’ve been waiting for this to pop up!

[@JasonJonieBuilds]

My bad I picked the wrong day. It was late when we uploaded it. Thanks!

[@JUANCLEYVA]

Excelente video! Muchas gracias por compartirlo!. Esta semana hablé en toms y wh4x4 y desafortunadamente el kit vent windows está agotado.

[@TreyLuckie]

This is going to be the most well built Bronco on the internet! Amazing work as always! Can't wait to see this thing rolling down the road!

[@JasonJonieBuilds]

Thanks Trey! That might be a stretch but we hope it shows well.

[@GDunc]

Great video! I wish I had this as a resource when I redid my doors and glass last year. I think I suffered some PTSD watching some of the steps. I held my breath along with you when you lowered the window frame into the door. I was right there with you! Lol! The black really pops against that green. That was the quickest video yet. Awesome to see it coming together. The minutes flew by!

[@JasonJonieBuilds]

Thanks! Yes it was stressful for sure. Quickest video....well you can tell we were bored with it. I missed a section while editing it. I told Jonie I couldn't relive it again to check the video. LOL We appreciate you watching!

[@bullheadhomestead]

Your build is looking awesome, I know doing a KZbin channel is a lot of work, I enjoy your videos and have learned a lot, thank you, Great Job!

[@JasonJonieBuilds]

Thank you very much and yes it is a lot of work editing. As you can tell I missed a section on today's way too long video. Oh well. Thanks for watching!

[@mustangminpin]

Looking forward to seeing your awesome Bronco!

[@JasonJonieBuilds]

We are so close... Just a few odds and ends.

[@CALJAMRLasVegas]

Great video. My passenger wing window bottom bolt sheared off and i'm going to fix it soon. This video helped a lot. Put a little lubricant on that old window crank assembly LOL.

[@JasonJonieBuilds]

Thanks for watching!

[@jeremyjenks]

rad

[@MrAyca40]

Appreciate all the videos you posted. Definitely helping me with my project. Do you have any videos showing the door handle install - both inside and out. I am having a hard time figuring out the install of the rods. Thank you.

[@JasonJonieBuilds]

Thank you! I don't think we did much of a video on that because of the tight area it would be hard to show. Good luck on your build.

[@RS-gh2mf]

Forgot to put the rear door stop on 😏

[@prenticepylman8047]

Looks great. But how could you do the fender flares without us?? Lol

[@JasonJonieBuilds]

Lol! Since I did a video in the past doing that, I wouldn't bore you doing it again!

[@williamblair2934]

Jason, Does the tip of the rear window runner for under the top window frame and then is compressed by the lower bolt for the top window frame? Thanks, Bill

[@JasonJonieBuilds]

Bill I am sorry but I am having a hard time following the question.

[@williamblair2934]

@@JasonJonieBuilds sorry Jason, I was thinking it was a bad question. Maybe this is better. The rear channel by the locking mechanism, I saw you screw in the bolt on the bottom hole, where does the top part screw into? I installed my window frame prior to the door hardware. I saw that you placed the rear window channel in first and then lowered the top window frame down in. Is the slot on he top of the rear window channel underneath against the door skin with the frame on the inside compressing the rear window channel against the door skin ? I hope that helps.

[@JasonJonieBuilds]

@williamblair2934 Yes, it is a little tricky but the window track tab will go under the frame. It does pinch between the frame and skin.

[@williamblair2934]

@@JasonJonieBuilds thanks much Jason

[@mustangminpin]

You keep mentioning getting ready for the show. Where and when is it?

[@JasonJonieBuilds]

Emerald Coast Cruzin in Panama City Florida

[@mustangminpin]

I have watched from the beginning. I had hoped to meet you in Townsend. Maybe next spring! Be safe!

[@JasonJonieBuilds]

We plan to be there and hopefully the Bronco will be even better by then.

[@dw-9877]

My eye’s, my eyes… How could you sleep that night not even some rattle paint on that poor runner… I’m hurt 🙄

[@JasonJonieBuilds]

LOL its gonna be alright.