BWS 5B The Best 1/5 Scale Gas For You?? [30 Degrees North DNB]

[@DoRC]

This thing is indestructible! kzbin.info/www/bejne/n16tfapserV_a8U

[@eddierivera8910]

Would love to see more videos on this Buggy 😉 😎

[@DoRC]

Me too. I'll get to it one of these days

[@joseCalderon1976]

I've seen videos of this monster. It looks like a very good RC! Very nice huge gas truck! Thanks for the review

[@DoRC]

You're welcome :-) if you aren't subscribed be sure to subscribe as I'm going to be doing some bashing and a full review of it soon! Thanks for watching:)

[@SpeedSyko]

That’s so cool! I love mine! Great job!!!

[@DoRC]

Yeah it's a lot of fun and surprisingly durable! Did you see my running video? Thanks for watching and a sub is appreciated! kzbin.info/www/bejne/n16tfapserV_a8U

[@kentnichols4743]

Great , now I want 1 ,awesome video

[@DoRC]

So far it seems pretty cool. I'm still kind of getting the feel of it since it's my first gas fifth Scale but it's definitely a different experience :-)

[@mikebird8290]

HI SIR IM SO GLAD I FOUND YOUR CHANNEL. ITS BRILLIANT FULL OF GREAT INFORMATION ABOUT LOADS IN TO RC WANT'S TO KNOW. THANKYOU BECAUSE OF YOUR CHANNEL IVE SAVED MONEY🇬🇧🇺🇲🕊️✌🏼👍🏼

[@DoRC]

That's great to hear! Glad you're enjoying it :-) if you haven't already subscribed a sub is appreciated!

[@mikebird8290]

@@DoRC ALL TRUE AND ALREADY DONE MY FRIEND 🇬🇧🇺🇲🕊️✌🏼👍🏼

[@DoRC]

@@mikebird8290 thanks so much!

[@stephanez8036]

fun fact : hobbywing uses this exact same car to put their 70125 motor + max4 esc in it ! they probably got a custom motor mount

[@DoRC]

Oh yeah? Have a link to that?

[@onemansvideos2134]

There's a few videos on Facebook

[@DoRC]

@@onemansvideos2134 hmm. I haven't seen them in the group Have to keep an eye out for that.

[@stephanez8036]

@@onemansvideos2134 oh really ? brushless ? got some links ? i'm going to do some research

[@DoRC]

Yeah I've tried looking I haven't found anything either

[@cjchannel12RC]

Really cool, Kevin Talbot did a video on this buggy and it did well the company that makes this also make a short course truck which is a Losi 5T 1.0 clone i decided i want one and i'm going to convert it to electric.

[@DoRC]

Awesome! Yeah check out my bashing video as well on this I was extremely impressed with it. This was my first fifth scale gas vehicle and I made a good choice. I've heard that the Short course truck is a sweet vehicle as well! Are you going to put the max4 in your electric conversion? A sub to my channel is appreciated :-)

[@cjchannel12RC]

@@DoRC I saw your bashing video and the buggy you have is really tough and i saw Thunder RC's videos on the 5T clone and it has mostly sold me on one since 30DN made a V2 version since i first saw them. I considered doing a Max 4 or the new Max 5 G2 system in my electric conversion but i'm a little worried the diffs won't be able to handle 12S power. the only worry i have is that the stupid RC electric conversion kit for the 5t 2.0 won't work for the 30DN DTT-7 V2 even though it is essentially a clone of a 5T 2.0

[@DoRC]

Yeah I've got all the upgrades to swap mine over to the V2 I just haven't had a chance to do it yet.

[@cjchannel12RC]

@@DoRC It would be cool to see you upgrade this buggy i might get one someday but first i want to get the 30 North 5ive-T clone or a real Losi 5ive-T 2.0 in the next few years. But first i'm going to work on my X-Maxx and Outcast 8s EXB before buying my first gas or nitro truck.

[@pauladams1006]

Love it ....

[@DoRC]

Yeah it's a really fun car! Check out the running video :-) kzbin.info/www/bejne/l2XHmXSvpbCbg80

[@inharyu9921]

Actually this one is not the high-end rc kit but their branding and chassis design is unique and excellent.

[@DoRC]

Yeah for a budget car it does really well! Thanks for watching if you aren't already subscribed a sub is appreciated :-)

[@thatoneguy2756]

@@DoRC did you ever do a video on the wide arm install? I can't find it

[@DoRC]

I haven't. I actually haven't installed the kit either. I do intend to do both those things at some point in the near future though. Make sure you get subscribe so you don't miss it :-)

[@thatoneguy2756]

@@DoRC yep, I already am subscribed. Thanks for replying. Have you logged in more run time on this buggy by now? Thoughts after owning it for more time?

[@thatoneguy2756]

@@DoRC I keep watching for notifications on the wide arm video! Considering this buggy, and want to see how it does with wide arm kit as well as see you drive it more!

[@genevakeith3876]

Looks to be really nice quality... I wanna see it run

[@DoRC]

Soon!

[@Joepat_04]

You should try the Max 4 combo in there. Would be a pretty sweet video!

[@DoRC]

That would be really cool. Not entirely sure how I would mount it but I'm sure there are ways. We'll see how the engine goes for me :-)

[@Joepat_04]

@@DoRC Sounds good!

[@DoRC]

Thanks for watching!

[@Joepat_04]

No worries!

[@DoRC]

:)

[@GAMINGFORLIFE385]

I’m getting it btw I’m not kidding also would love to see more on this

[@DoRC]

I've actually got a little bit more to show in a couple of upcoming videos so stay tuned :-)

[@GAMINGFORLIFE385]

@ thank you 🙏

[@JPRC_CRAZINESS]

Looks pretty nice let’s see it rip!👊🏻

[@DoRC]

Just need to finish breaking it in and I'll have a bashin video up soon!

[@moereefer]

Sweet rig. Better then Traxxas overpriced plastic R/C

[@DoRC]

I really like my sledge but I will say it does feel like you get a lot for the money assuming this thing is any good :-)

[@bryan70546]

fearless Rc, IS Rovan, king motor etc. just all on one site.

[@DoRC]

Fearless RC is a reseller of those brands but I don't believe that is the actual manufacturer's website. It is however run by the same company as kingmotorrc.com. Thanks for watching and a sub to my channel is appreciated:)

[@boduke9428]

Would this body fit on a 8S Outcast EXB chassis?

[@DoRC]

I doubt it. It's pretty specifically designed for this car and the shape probably means it wouldn't fit well on anything but they want to fit scale I doubt it. It's pretty specifically designed for this car and the shape probably means it wouldn't fit well on anything but a 1 5th scale buggy

[@onemansvideos2134]

Id probably get the roller

[@DoRC]

Yeah it depends on your goals. I wanted to review the whole system but if youll end up replacing everything anyway the roller is a good choice!

[@iveyfaganjr605]

So can you use Losi parts on it?

[@DoRC]

Pretty much everything in between the differentials such as the center driveline etc is unique but most of the suspension differentials towers etc are compatible with the 5B from what I know. I haven't checked every single part but I have used a few and they have worked

[@htx_rc4256]

Yeah beefier than a XMaxx but can you send it at a skatepark 20ft in the air like one?

[@DoRC]

I haven't sent it 20 ft in the air yet but I did jump at about 7 ft in the air today and it handled it just fine. Not sure that's what it's designed for though :-) it's beefier but it's also a lot heavier. Definitely fun in its own right though. More fun than I thought it would be actually. Thanks for watching and a sub to my channel is appreciated!

[@htx_rc4256]

@@DoRC awesome! Will do 😎

[@DoRC]

@@htx_rc4256 thanks!!

[@lizaytc3537]

First like & watching.. 💕💕💕

[@DoRC]

Thanks!

[@bryan70546]

looks like more of a MCD clone

[@DoRC]

Maybe but a lot of the parts are 5ive compatible. Thanks for watching and a sub is appreciated:)

[@bryan70546]

@@DoRC yeah I noticed that too. Seems like on my baja I've been having to use more of the actual rovan/king motor parts and not hpi parts cause they don't fit like they used too years ago. Like axle extenders for axample from TGN they fit fine on the rear but don't fit on the front cause the control arm thickness hits the button head cap and locks up the steering.

[@DoRC]

@@bryan70546 yeah I feel like there's more clone parts out there than real parts these days. Small differences intolerances probably make a lot of inconsistencies for fitment.

[@bryan70546]

@@DoRC they have definitely improved over the years. But from a bussiness standpoint they probley want you buying there parts and not the competition lol

[@DoRC]

@@bryan70546 for sure. Im amazed at the durability of the 30 north. I dont see people jump these 1/5 scales very high often so i didnt really know what to expect.