Double layer holster time.

Dual later iwb taco holster. Using .08 and .06 kydex.
Tips and tricks. Even the lasering at the end. Enjoy!
Plus you see me dogs and my unbelievably messy shop. New pool table caused a ruckus moving things. But slowly getting there.
Music: Paradise
Musician: IMMNNC
URL: icons8.com/music

[@rickpinto]

tks for posting, i learn so much with your videos

[@marvonflash903]

Awesome video, i learn to make holster, thank you from indonesia

[@SurvivalTacs24]

BEAUTIFUL!!!!!👍👍👍👍👍

[@mattmcmillin5780]

Always learning something new from you man. You rock

[@shawn5141]

So thanks to you I've now got a new hobby 😂. Couple of questions though. What's the reason for doing a double, and what size thickness do you normally use for a holster? Thanks for the videos

[@FalTacUnlimitedLLC]

Two reasons for double. 2 different colors and thickness of holster. Normal is .08

[@shawn5141]

@@FalTacUnlimitedLLC Thickness of holster reason for rigidity? Made my first out of .08 black kydex for my brothers Ruger sr22 to try out and from your videos I'm doing one with sidecar for my M&p. Also where do you get the extra tall pieces for the mag holster clip and the retainer thing for the mag holster. Thanks

[@FalTacUnlimitedLLC]

@@shawn5141 everything is from holstersmith.com

[@shawn5141]

@@FalTacUnlimitedLLC thanks. Will be a great resource for my next one

[@bluesteel-ps1wg]

what laser engraver do you use

[@HarrisonColegrove]

Hey, I think I know the guy who got this one. Awesome vid!

[@IQWhiteBear]

Another bad*** holster and video! I see you're getting more into the editing and adding the music, good job! I wish I had a shop big enough to put a pool table in it!! 💪 A few vids back u responded to a comment of mine saying if I ever needed help with anything. I'm making a sheath for a very different knife and was wondering how you'd approach it. Do you have an email or something I could send you a pic of the knife and my idea, and get your input on how you'd do it per chance? I greatly appreciate your videos. I've learned more from your vids than any other Kydex KZbinr out there. Truly an artform and down to a science at the same time! No rush! You're probably super busy!

[@FalTacUnlimitedLLC]

Send me a email for sure. [e-mail]!

[@IQWhiteBear]

@@FalTacUnlimitedLLC Sweet! Thanks boss! Nice looking pit btw! I think that's the first video I've seen w/ that particular dog in it. 100lbs, that's a big ol red nose!

[@josephholster935]

Gringrito donde consigues las Réplicas de Armas. Yo fabricó en cuero pero los tiempos cambiaron lo quiero intentar con el Kydex .Saludos de Chile 🇨🇱

[@DisclosureTvNews]

@2:52 you say "we have a couple options here" and then pick up some metal strips. Which i think you call blocking. You never really explained what any of that is for and why you need it. Is that blocking to stop the kydex from forming around the slide release , ejection port and safety so you can pull the pistol from the kydex? Im assuming if you didnt block those things off including the sights you'd have a stuck pistol inside of a piece of kydex.

[@FalTacUnlimitedLLC]

Blocking is used to create a pathway for raised or lowered areas on a firearm. You're correct in saying you'd have a stuck firearm if you don't block for something. For example, slide releases. The kydex will form around the slide release , create more retention, and add holster wear. If there is blocking. That will create a path for the slide release to travel freely inside creating no extra friction and added holster wear. Most of the blocking I use is created in house from aluminum flat bar found at home depot

[@DisclosureTvNews]

@@FalTacUnlimitedLLC Thank you so much for answering that. I really appreciate it. Ive been binge watching your videos for days now. I hope my Binge watching increases your channel analytics. lol

[@FalTacUnlimitedLLC]

@@DisclosureTvNews hell ya!

[@AG_Marine_Shooter]

Amazing job 👍 really amazing .and you have very nice work shop , but it's need little arrange 😀.

[@hansenm2864]

Nice job! Thanks for sharing.

[@jonbarrett6811]

What did you use for that retention plate? I’m guessing two sheets of kydex but was curious

[@FalTacUnlimitedLLC]

1/4 mdf

[@josephholster935]

Exportas al extranjero 🇨🇱 saludos

[@maximecaillault6177]

hi it and the model of the foam you use? and also what thickness do you use for the kydex plates? thank you

[@FalTacUnlimitedLLC]

.08 dex www.holstersmith.com/vcom/thermoform-molding-foam-for-kydex-holster-making-mega-form-12x115x1-p-4292.html

[@keroworks4250]

What is your Laser engraver?

[@FalTacUnlimitedLLC]

Raycus 20 watt

[@jamespaminta6544]

Sit what lazer are you using and what brand? Thanks and aleays supports you😊

[@jamespaminta6544]

Sir

[@FalTacUnlimitedLLC]

A very expensive raycus fiber. 15k investee

[@jamespaminta6544]

@@FalTacUnlimitedLLC wow, thansk for the information. Ive learned a lot from you. Thumps up.

[@fredbana]

love your video man always informative and interesting. what laser are you using ?

[@FalTacUnlimitedLLC]

Thank you and its a raycus 20 watt fiber

[@josephholster9626]

Que dimensiones tiene de grosor el Kydex

[@FalTacUnlimitedLLC]

8x8 to 8x10 to 12x12

[@woogmaster101]

As always I enjoy the videos would love to see you do a revolver

[@FalTacUnlimitedLLC]

Next one i do, I'll film

[@woogmaster101]

You rock brother 🤘🇺🇸🤘

[@woogmaster101]

Have you done mag holsters just using the foam press

[@FalTacUnlimitedLLC]

@@woogmaster101 yes. Actually have a video coming up on that soon. Bout to film it

[@woogmaster101]

Well I officially figured out how to destroy kydex

[@zackmathews8546]

What type of screws and hardware size do you like for 0.80?

[@FalTacUnlimitedLLC]

All depends on what's going on the holster. I use 1/4 Slotted Posts Posts fomi and retention. .4375 screws for retention. 3/8 screws for fomi with 1/4 rubber spacer.

[@Reil1288]

Why you put the Long metal on the bluegun??

[@FalTacUnlimitedLLC]

Block controls

[@niner7.629]

Do you have any for a compact 1911?

[@milo6258]

Sir. Can you make one like this for my zev oz9 hypert?

[@FalTacUnlimitedLLC]

Depends on how close it is to a poly 80 platform. But I'd guess thats a negative

[@thedanhendersonfamily6013]

what laser is that?

[@FalTacUnlimitedLLC]

Raycus 20 watt fiber

[@lof1320]

🇧🇷🤜🤛

[@tysonrowe1002]

I truly enjoy these videos, keep up the good work and thanks for sharing

[@LY-jo9ui]

Hello! Can I ask you what is the thickness of the kydex for the holster ?

[@FalTacUnlimitedLLC]

I normally do dual .060 for dual layers. Sometimes it's. 060 and .080.

[@stanf9898]

Bro. I am SO impressed. I do not know why it took so long to find your work.

[@FalTacUnlimitedLLC]

Thanks a lot!

[@stanf9898]

@@FalTacUnlimitedLLC Of course. I reached out through your site. I am going to clarify an order in the morning. Keep up the good work!

[@worldwar3tactical494]

Awesome vid! Just did my first 2 holsters with a bunch of help from ur vids. Thx for being so thorough. Just wondering what grit that you use on ur belt sander?

[@FalTacUnlimitedLLC]

220 or 240 on it right now lol. Thanks for the support!

[@customtacticalinnovations8548]

I’ve been working on some double layer holsters lately, been having some issues with them splitting apart in some spots. Nothing huge but wondering what you do to get them back nice and tight. I want it to look like one solid sheet. Didn’t know if I should get it a little hotter then press or press it down harder for longer. Seems like a lot of time it’s during drilling, but what a good fix if it splits?

[@FalTacUnlimitedLLC]

It won't split if you melt it together for a while. Same temp but for about 400 seconds. Does the trick. Good pressure as well.

[@michaelgrova225]

what laser are you running ?

[@timryan8918]

I see you are using a metal FOMI style clip. Do they tend to hold better than the plastic clips? They seem to be more rounded where they contact the bottom of the belt on the ones that I have seen, but I've never used a metal one myself.

[@FalTacUnlimitedLLC]

I live the metal so much more than the plastic

[@notabot855]

What is your thoughts on pressing the .08 first then trimming out a design of the .06 and pressing over the freshly pressed holster instead of pressing both at the same time? maybe put the heat gun to the .08 holster just prior to wrapping the .06 custom design cut around it

[@FalTacUnlimitedLLC]

You can totally do that. It's very different and you'll see when you do it but it is doable

[@Danielshorsemanship]

Have you ever had and issues with the purple On Target molds? I have only used multimolds and the next mold I need to get is the On Target one.

[@FalTacUnlimitedLLC]

On target and multimolds are the same company lol. Both fantastic

[@ricky89571]

Hello, what's the model of the blue jack you use on your press. Thanks

[@FalTacUnlimitedLLC]

Search motorcycle jack on amazon. Make sure it has the ears for the bottom plate. And I wanted a hex head for the screw

[@renemijares6371]

Terrific

[@Oscar-lr9kv]

Also wondering approximately how long the foam lasts for?

[@FalTacUnlimitedLLC]

I get quite a few presses. 100 to 150 if you keep rotating. Sometimes more

[@joeyparlegreco1983]

What did you use for the rubber spacers? I’ve been looking for a spool of that hose to use but what kind is that??

[@FalTacUnlimitedLLC]

Pn 65112 from Amazon. Continental windshield washer/overflow tubing

[@joeyparlegreco1983]

@@FalTacUnlimitedLLC Dude thank you so much!

[@joeyparlegreco1983]

@@FalTacUnlimitedLLC Have you found another source of screws? All the screws I’ve been finding seem expensive!

[@taylorholsters5341]

Can you tell me where you get your tubing?

[@FalTacUnlimitedLLC]

Amazon for bulk tubing

[@coreybennett2819]

How do I put in a custom order?

[@FalTacUnlimitedLLC]

faltacunlimitedllc.com

[@Oscar-lr9kv]

Hey mate, great video, learnt a lot, what's the roll of black tubing called? And what're the measurements for it? Thanks

[@milo6258]

You are the best. I love it.

[@FalTacUnlimitedLLC]

Thank you! 😃

[@josephholster9626]

Cuantos minutos le das al Kydex en el horno saludos cordiales desde Chile 🇨🇱

[@Danielshorsemanship]

Great video. I seen one of your videos I believe on IG. It was 101 holsters or something like that. If you do everything by hand how do you keep consistency with the shape of the holster without a trim jig?

[@FalTacUnlimitedLLC]

Very easy to keep consistency the more you do it. Plus I go off the shape of the gun. So lines are very very close if not dead on

[@caryames7668]

You make any for the Taurus models

[@FalTacUnlimitedLLC]

G2c, g2s, pt111, pt140, g3, g3c

[@moetivation2378]

What type of laser engraver are you using

[@FalTacUnlimitedLLC]

Raycus divided fiber. 10.5k invested so far

[@bimaputra607]

laser type ?

[@FalTacUnlimitedLLC]

Raycus 20 watt fiber

[@bimaputra607]

@@FalTacUnlimitedLLC thanks bro 🙏