Which Switch Pod is the best (Voswitch vs. Rough Country MLC-6 vs. sPOD sourceLT)

[@TormentedVet_Reactions]

Seems like a standard rocker would be able to be used in both the RC system and the Spod

[@DownSouth_Adventures]

It will

[@bryonlippert5530]

Nice video. I'm liking that VosSwitch not just because of price. I had a procomp switch for my Tacoma that worked well.

[@DownSouth_Adventures]

It was a decent system but didn’t hold up well during water crossings

[@roberthippensteele2112]

I’ve relocated my vacuum pump where all of this install. Have you relocated yours and where did you mount it?

[@DownSouth_Adventures]

Unfortunately Mine is still in the factory location

[@roberthippensteele2112]

Thanks for the response guess I will need to do some engineering! Lol

[@Baileybear85]

I really eyeballed the VoSwitch system for a decent amount of time, because it looked like it was a solid piece that was really going to help clean up and simplify my wiring. I had another, cheaper switch panel installed, then swapped it out, what I will say is, im highly disappointed that there arent dedicated ground terminals in the source box, and you have to run your ground wires to a nut on the frame of the jeep, this made it very complicated as a lot of my accessories are two wires encased in waterproof rubber.

[@DownSouth_Adventures]

Gotcha, I love this one so far

[@thomasthewrangler]

On the VoSwitch do you have to press the sliver button on the end to use the others or is a on/off switch for the back lighting

[@DownSouth_Adventures]

It’s just for the backlighting but Honestly the Auxbeam switch panel is the best one on the market now in this price range.

[@alexisduarte3917]

Just use the auxbeam series of switch panels

[@DownSouth_Adventures]

That's what I am using now

[@jdawg2474]

If you are running rgb halos, should you wire them to the switch pod along with your other auxiliary lights and light bars since the switch will be connected to the fuse box itself?

[@DownSouth_Adventures]

Those are small I would just go to the fuse box and not waste a switch.

[@timb.5967]

Good review. Thanks.

[@tatuboy1]

Once again Budget wins!

[@lisastarr2433]

Thanks for the info. Planning this as my next project. Camp NEEKED

[@DownSouth_Adventures]

Shoot me your address on FB and I’ll send you a decal!

[@David-Drums]

Intro is crazy long.

[@DownSouth_Adventures]

Yep we no longer use that intro for reviews. Thanks for watching

[@andresvargas2650]

So basically there is no control box that can be fully submerged?

[@DownSouth_Adventures]

Lol not to my knowledge, some of them are tighter than others, but definitely not waterproof

[@stevewalker6936]

I really appreciate your review

[@DownSouth_Adventures]

Thanks for watching!

[@johnimperial9777]

Can i connect the switch on high beam?

[@DownSouth_Adventures]

Hey John I would imagine so… but can’t say for certain

[@johnimperial9777]

@@DownSouth_Adventures what if i cut the positive wire of the switch and connect it on high beam?

[@tacolander_offroad7032]

budget FTW. fantastic video guys!

[@DownSouth_Adventures]

Thanks so much!

[@billwaterhouse5894]

Switch pros?

[@DownSouth_Adventures]

Unfortunately I didn’t have access to them at the time but I hear nothing but good things about them.

[@billwaterhouse5894]

@@DownSouth_Adventures Think I might try it (mod. 9100, 8 switch), very expensive as well compared to Voswitch...but I do like quality 🤷‍♂️

[@DownSouth_Adventures]

@@billwaterhouse5894 It's probably worth it, in most cases you get what you pay for!

[@billwaterhouse5894]

@@DownSouth_Adventures so true