Jeep JL Wrangler JT Gladiator Auxiliary Switches by Switch Pros Installation on WAYALIFE CB BAR

If you've got a Jeep JL Wrangler or JT Gladiator that didn't come with a set of auxiliary switches or maybe it did but you still want more than the 4 switches they give you, you're gonna want a Switch Pros switch system! Available in an 8-switch SP-9100 or 12-switch RCR Force 12, the Switch Pros is a compact, solid state power system that's capable of delivering 125 amps of continuous power. As an added benefit, it's also Bluetooth enabled, can be operated remotely and is fully programmable using an Apple or Android mobile device. Of course, installing an aftermarket switch system like this can be a bit of a challenge in a JL or JT, especially if you're wanting to do it cleanly and it's for this reason that I decided to make a Switch Pros Switch Mount for my CB BAR. In addition to being adjustable to accommodate CB, HAM and Race radios of different makes and sizes, the Switch Mount can also be used to relocate most radios about an inch closer to the windshield. In this video, you'll get to see just how quick and easy it is to install a Switch Pros switch system and onto my CB BAR using my Switch Mount! Please let me know if you have any questions.
SUPPORTING VIDEOS
CB BAR Installation Video: • Jeep JL Wrangler JT Gl...
Tailgate Antenna Mount Installation Video: • Tailgate Antenna Mount...
WHAT YOU WILL NEED
CB BAR Switch Mount: www.wayalife.com/store/prodde...
CB BAR: www.wayalife.com/store/prodde...
JL Tailgate Antenna Mount: www.wayalife.com/store/prodde...
Switch Pros SP-9100 8-Switch System amzn.to/3oPbveT
Switch Pros RCR Force 12-Switch System: amzn.to/3jeoClx
JL Wrangler / JT Gladiator Mounting Kit: amzn.to/2YwmvBB
ARB Compressor Harness: amzn.to/2YoaCO7
Additional Legends: amzn.to/32gwiwH
RECOMMENDED TOOLS
Milwaukee Ratchet: amzn.to/2RaT7MT
Tekton Bit Set: amzn.to/3gkE79V
Plastic Trim Tool Set: amzn.to/3gj1DnF
Wire Strippers: amzn.to/3Cp6jnl
Butt Connectors: amzn.to/3EvVLEJ
Electrical Tape: amzn.to/3lU2S1B
Wire T-Taps: amzn.to/3Cp68Zd
Heat Gun: amzn.to/3EuYlLc
Come visit us at: WAYALIFE.com
* Please note that the Amazon links posted are associate links and WAYALIFE does earn a small kickback for purchases made through them.
#auxiliaryswitches #auxswitches #switchsystem #switchpros #jeep #wrangler #jeepwrangler #jlwrangler #wranglerjl #jljeep #jeepjl #gladiator #jeepgladiator #gladiatortruck #jeepjt #jtjeep #jeepgladiator #wayalife #jljournal

[@pete565]

Don't - ever - change- the - production- quality of these vids. It's so good. You've achieved Rank #1 jeeptuber in list.

[@wayalife]

We're truly flattered that you would say as much, thank you. 😊

[@recker112]

I just found your channel and I gotta say you're one of the only ones who actually gives a great description on everything you do 🙌🏽

[@wayalife]

Thank you. I really do appreciate it 😎

[@sexyplexie]

i love this channel, i'm watching the ignition wire-up as he talks through it, say out loud "clean that up dude, look at that thing" and then he mutters "this looks like a lot of wire [...] +snip+" and i suddenly develop a new level of respect. nice and clean install video. if i could like it twice i would.

[@wayalife]

LOL - thank you. We're happy to hear you enjoyed our video.

[@user-rm1mf8eh3d]

Hello. Here is Korea. I am your old fan. The Gladiator officially started selling today. Your video is very popular in Korea.

[@wayalife]

Awesome! I'm so glad to hear it 👍

[@glennroberts3069]

I’ve been looking for the right Jeep for over 2 years. The wife says “ you’re not buying someone else’s toy” “You don’t know what it’s been through” She’s right. Well I’m getting close. I’m JK partial but……….. anyway I wanted to thank you for this video. As I learned in the military for 30 years, teach to the lowest level. You are, that’s me. Unlike others, I wanted to thank you for not belittling us or talking done at us. Well done. I thank you.

[@wayalife]

Thank you and happy to hear you find our videos to be helpful. 😎 Good luck to you on finding the right Jeep.

[@jon5045]

I just recently bought a 2021 two door jeep Willys, I have been watching videos nonstop! You are by far the best channel, don’t ever change how you do the your videos!! simply awesome!!

[@wayalife]

Truly flattered that you would say as much. Thank you.

[@johnambro7181]

Your unboxing is bar-non the best entertainment, and all your vids are informational as well as practical. Great channel! Cheers:)

[@wayalife]

LOL - thank you, we're truly flattered that you would say as much and that you enjoy our videos. 😎

[@angeloplanes8497]

The more I research, the more I want this in my JT. Very clean looking

[@wayalife]

Awesome! If you haven't seen it already, the bar has been improved since this video was made and you can see it here now wayalife.com/threads/acc-bar-jeep-jl-wrangler-jt-gladiator-overhead-accessory-mount-installation.64450/

[@mtblantonjr]

Very professional and clean setup! I’m gonna be looking at ur CB Bar for my newly acquired TJ. Great vids!

[@wayalife]

Awesome! Thank you!

[@Rescue-mt7fl]

Thank you, you are a natural instructor. Your explanations and content are both straightforward and entertaining!!! Keep ‘em coming !!

[@wayalife]

Truly humbled that you would say as much. Thank you.

[@nealdickson9156]

I wanted to say thank you for a great video. Just installed my SP-9100 on 2020 JT Rubicon.

[@wayalife]

Awesome! So glad we could be of help to you 👍

[@georgeschultz-akasonoftrai69]

Eddie , another superb how to video and awesome product spotlight, awesome!

[@wayalife]

Thank you my friend

[@MichaelVician]

You always make installs look so easy. 😀

[@wayalife]

LOL - thank you.

[@nachovalenti]

Wow! Seems easy but that's because you are the Jeep master. Great video and many thanks for sharing.

[@wayalife]

LOL - Honestly, it really was about as easy to install as you see in this video :)

[@dc5631]

Dude thats sick. I just drove my truck to Arizona for military training wish I could see your rig up close. Thats a good set up.

[@wayalife]

Glad you enjoyed the video and glad you like our rigs :)

[@matnelen1724]

Installed tonight (on soft top). Super easy and the soft-top mounts fit perfectly over top. No issues. If you remove the plastic roll-bar cover on the under side, you can drill a clean hole just next to where the CB BAR attaches and route wiring through that and down the a pillar. With the CB BAR bracket covering the hole, there's nothing in site. For me it was easier to run my wiring through the CB BAR first, and then mount it. Also for anyone in doubt, the grab handle needed a pretty decent yank to get out. It's a sturdy plastic clip. So if you remove the bolts and it just wiggles but won't pull, yank hard.

[@wayalife]

Awesome! So glad to hear the install was easy and that you're happy with your CB BAR. Nice tip on getting the wires hidden too. 👍

[@RickSwartwood]

Excellent Video! EXCELLENT R&D on the plates and bar!

[@wayalife]

Thank you! We're so glad to hear you say as much 😊

[@zman92630]

Dude, really excellent video. Nicely done! You really make the instruction simple to follow.

[@wayalife]

Awesome! So glad to hear you say as much 😊

[@livindalife5356]

You make it look so easy. Thank you for this great video.

[@wayalife]

LOL - it really is that easy. Glad you enjoyed the video :)

[@Oliver-pl5sk]

Superb as always! Looks like you always get 2 sets to try one out first so you can be smooth in the video shoot.😀. You work on stuff as if you manufactured them.

[@wayalife]

LOL - well, I have been doing this Jeep thing for well over 20 years and have installed a ton of products during that time.

[@desertfox3860]

Very nice install and in a workman like manner! Thanks for sharing.

[@wayalife]

Thanks! Glad you enjoyed the video :)

[@PhatboyHD88]

Thanks for the video Eddie , excellent and informative as always 👍👊

[@wayalife]

You bet! So glad you found our video to be informative :)

[@tripleseven8361]

Excellent instructional video… Well edited and great camera work… Thanks! Now I just need the Gladiator to go with it…(I do have an 06 TJ).

[@wayalife]

Thank you. We're happy to hear you liked our video.

[@ricknmoe100]

Phenomenal video. I really want a Jeep now. It looks like you can completely customize it to whatever your heart desires. 😎🤙Simply awesome.

[@wayalife]

So glad you enjoyed our video :)

[@matiasferrer6400]

Bruh, were you like born in a Jeep...with tools in hand??? That was smooth and flawless. Thnx.

[@wayalife]

LOL - you're way too kind. Glad you found our video to be informative :)

[@captdunnawayify]

What radio do you have?

[@wayalife]

captdunnawayify we’re running an icom race radio

[@rogerwixom759]

thanks Eddie for an informative video I always learn alot from your videos

[@wayalife]

Awesome - glad to hear it

[@goofsaddggkle7351]

Very cool. I’ve always thought the trailer package was a must have option but now I see you can after market this as well.

[@wayalife]

The factory auxiliary switches are nice to have but no, they are not a must and yes, this is a great solution if not better in my opinion.

[@shooterg2071]

Best install video I've seen of the switch pros!! Nicely done. Wish I had it when I did my install. I see a CB bar in my future with the switch panel relocation. Love the set up!

[@wayalife]

Thank you and glad to hear you're wanting to install a CB BAR and this mount in the future. :)

[@cowelk]

Thank you Eddie. I save links to your videos to a Word document in my Wrangler folder on my computer. I am sure I will need to see this video again later in the year. I know I need lights and therefore switches for my Wrangler JLU Sport.

[@thomasrossi31]

Nice to see your videos again.

[@wayalife]

Thank you, we're so glad you like them! 😊

[@daleprechaun1791]

i dont even drive a jeep but this video explains so much and so good.

[@wayalife]

LOL - thank you. Glad you were able to enjoy watching our video 😎

[@walterclark5882]

Great Video! I never knew that LED are backward! That's a big help :)

[@wayalife]

Yup, there's a reverse bias in the diodes. Glad we could be of help :)

[@ahgoII]

Bro, I'm new to the jeep world and your video was spot on. I got my Switch Pros setup in no time and working perfectly. If you didn't post the link to the Jeep mounting kit, I would have been lost. Thank you

[@wayalife]

Glad it helped

[@silverstake88]

Excellent video editing and description. Subbed!!!

[@wayalife]

awesome! Thank you and thanks for subscribing 😎

[@Matt02341]

Smooth as Butter 🧈 Thanks Eddie!

[@wayalife]

LOL - glad you enjoyed it :)

[@michaelhulsey201]

Just the video I needed! Not installing the CB BAR yet, but I have a tricky wiring situation for off road lights on a 22 JL with Manual trans, and so the plug in the firewall is not available to me. This gave me a great idea how to get the harness from the engine bay to the rear end!

[@dawnbigwarfe6871]

You r an excellent instructor! Thanks for all your time.

[@wayalife]

Truly humbled that you would say as much, thank you and happy to be of help.

[@claudeperrault4164]

I love your videos. They are well made, to the point and super easy to follow when installing various components to our Jeep. Kudos to the videographer as well! 👍

[@wayalife]

Thank you. We really do appreciate it and we're so glad that we can be of help to you.

[@Tru3Wilderness]

Eddie awesome vid, keep the install's going man! Thank you!

[@wayalife]

So glad to hear you're liking our videos 😊

[@Tru3Wilderness]

@@wayalife always 👊🏽

[@ZEROZIGEN]

I'm in a jeep JL in Japan This channel is very helpful and I often watch it It would be nice to be able to buy parts even in Japan 次の動画も楽しみにしてます

[@wayalife]

I can sell these parts to you but shipping can be cost prohibitive. Contact me through our store or on the forum and I can see if there's something I can do to help.

[@CoffeeCarsCamp]

I’m glad I found your channel, new gladiator owner here and I can’t wait for the CB Bar to be back in stock. Thanks for the great content.

[@wayalife]

Awesome! Glad to hear it. I'm just waiting on the main bars to come back from powder coat. Hoping to get them in stock today or Monday.

[@bobbymuy989]

Awesome video again thank you Eddie and Cindy!!

[@wayalife]

Glad you enjoyed it

[@neilfoster3145]

Great video, as always. This one really helps, because the instructions on the Switch Pros website are pretty...light...and you really demystified the process for me. I was really unsure how I could attach the light blue wire to an ignition source, but seeing that they include the plug for use within the fuse panel, makes the installation look so much easier than I was anticipating. Thanks for your continued videos and explanations.

[@wayalife]

Awesome! So glad that we could help you out in this way. :)

[@eljaime3839]

Great video! Step by step well explained 🙌🏽

[@wayalife]

Glad it was helpful!

[@JeepAndThings]

I love your videos and just bought the cb/switch/read cb antenna hardware.

[@wayalife]

Very cool! 👍

[@gretchenstormer6501]

You certainly make really good videos. Thank you

[@wayalife]

Truly humbled that you would say as much. Thank you.

[@jayjooseo7325]

Your video is the best! I love all your content :)👍👍👍 Thank u.

[@wayalife]

Thank you so much 😀

[@AKArusty]

Thanks for the great install video!

[@wayalife]

Glad it was helpful!

[@robertgarcia6385]

Man I wish you had an eco diesel Jeep you would make my life so much better…..either way your videos are the best! Thanks

[@wayalife]

LOL - I wish it were out when we bought our Jeeps.

[@robertgarcia6385]

@@wayalife sounds like a future sneak peak video 🤣. Appreciate your videos helps a ton many blessings.

[@richardheeth6218]

Great video. When you installed the studs on the switch panel, I wondered if you were going to leave them protruding like that. Very clean install!

[@wayalife]

LOL - oh no, I couldn't leave things like that 😎

[@terryderush7066]

And why I didn't think of that. That is pretty cool tho. Always glad to see your videos.

[@wayalife]

Glad you liked it!

[@bobbybridges9384]

Great Video Eddie. Thanks as always.

[@wayalife]

Bobby Bridges so glad you enjoyed seeing it 👍🏻

[@stevetabor4447]

Good seeing ya Eddie very cool setup, this is what else I like about your channel you have this down very well on your how to installs class act you make it look so easy 😂 awesome stuff as always be safe an wishing you an Cindy the best 👍👍

[@wayalife]

Thank you, we really do appreciate it :)

[@pspimages651]

Great job as always!

[@wayalife]

Thank you :)

[@kelvinrivas5785]

Dude your a heavy hitter I love your content

[@wayalife]

LOL - why thank you :)

[@Gladiator.562]

Badass gladiator build. 👍🏼

[@wayalife]

Thank you :)

[@BigBurger67]

I don't even own a jeep, but I really enjoy the videos. I have a 2016 f 150.

[@wayalife]

LOL - awesome! We're happy to hear it 👍

[@Sam1986E]

Amazing install video! Liked and liked allot

[@wayalife]

Awesome, so glad to hear it :)

[@JeepGladiatorestAprilJTR]

Great video Eddie! Thanks. 🤙🏽

[@wayalife]

Glad you liked it!

[@furious7515]

Another outstanding video!

[@wayalife]

Glad you enjoyed it!

[@user-io3hw7hx7q]

Awesome outstanding job have a great time thanks

[@lpis45]

Great vid as always

[@wayalife]

Glad you enjoyed it

[@philwilson3140]

You do a nice job with your videos

[@wayalife]

Thank you :)

[@thestockg37]

awesome video! really easy to follow

[@wayalife]

Glad you liked it!

[@BottleJackBuddy]

Looks great. Such a clean design. Great job making this all work together.

[@wayalife]

Thank you my friend :)

[@chrisjones2252]

Great install. Plan to do this mod, seeing I have the CB bar. Great design as well. Have a few other things that have priority, but will be back to get this great mod. Keep it up Eddie.

[@wayalife]

Awesome, glad to hear it :)

[@augustin2105]

Bruhh,,, Very clear instructions✊️👊🤙thank You

[@wayalife]

Glad it helped

[@jamestait3507]

It’s been a while but always great content, and thank you for removing those studs it looks great 👍🏼 can’t wait for more videos.

[@wayalife]

Awesome and thank you :)

[@DeanJohnson67]

another great how to by Eddie the Jeep Mods Sherpa! Guiding us all Safely to Jeep Paradise ;)

[@wayalife]

LOL - too funny. So happy to hear you found the video to be helpful :)

[@casey3057]

Great video as always. Love how pappy is just sitting there... sideways... in the garage almost supervising. Could be the coolest thing I’ve seen in a while. Cheers guys. Miss wheeling with y’all.

[@wayalife]

LOL - hope we can fix that in the near future.

[@Emmanuel-ow3ix]

Looking at tools on an other page listening to this video in the background when all of a sudden 2:30 "...and then we can thread on these nuts". Guess I'm still not too old for juvenile chuckles.

[@shannonmutchler7623]

Just saw you going the other way in the gladiator that thing is a beast wish I could of cought up to you and check it out.

[@wayalife]

No kidding, I hope I waved to you :)

[@aaronw8352]

Great video 👍

[@wayalife]

Glad you enjoyed it 😊

[@dalecharles811]

Great video

[@wayalife]

Glad you enjoyed it

[@guimoerb]

another great video.

[@wayalife]

Glad you enjoyed it 😊

[@jpk0612]

Love your tech videos. Dying for more wheeling content too. Can't wait!!

[@wayalife]

Thank you and we're hoping to get more wheeling in as well. Been a tough year with all the big events getting cancelled.

[@dilligaf8819]

Unboxing’s are off the hook!

[@dilligaf8819]

Just sayin

[@wayalife]

LOL - glad you like them :)

[@richmyer9111]

I always use dielectric grease on all my connections. Also, nice Icom land mobile radio , hope you your license for it.

[@GroundPounder]

It would be nice if you had an optional CB mount to allow multiple radios. (Full CB, GMRS, Ham) on the bar. Nice clean design, excellent video tutorial. Excellent work.

[@wayalife]

There are lots of guys who just drill into the CB BAR and install all the things they need including multiple radios. You can find some pics of this on the WAYALIFE forum.

[@GroundPounder]

@@wayalife Thank-You. I think you've solved a real pain point for folks that love Jeeps and Radios.

[@swarbrickjesse]

Not only was this video relaxing on a Tuesday night, but man was it informative. You are a PRO... BRO!

[@wayalife]

LOL - glad to hear it 😊

[@ortiz73caify]

Awesome set up I’ve been thinking about an s-pod for my JK. I’m just not good at wiring so I’ll probably take it in lol.

[@wayalife]

I would highly recommend a Switch Pros. As you can see in this video, installation is super easy and there's no relays or fuses to deal with.

[@ortiz73caify]

Wayalife where can I get one?

[@alfonsosanchez4694]

Always been hesitant to add switches to my Jeep but damn, you make this look easy !! Cheers from AZ

[@wayalife]

So glad to hear it! If you follow our video, it will be just as easy to install on your Jeep, I guarantee it!

[@Johnnys_Off_Road_Adventures]

Love the cb bar I’m waiting for them to come back in stock so I can get one

[@wayalife]

Awesome, we should have more in by the end of next week.

[@Johnnys_Off_Road_Adventures]

@@wayalife that’s awesome thanks. do you need the switch pod bracket to push the radio back like you did in this video.

[@wayalife]

I've actually redesigned the CB BAR and now it sits a lot higher up. In fact, it sits above the sun visor now. A relocation bracket will be needed to push the radio closer to the windshield but it will no longer work if you have adaptive cruise control. The sensor on the windshield will get in the way.

[@Johnnys_Off_Road_Adventures]

@@wayalife awesome thanks that helps I know what to order now. I’ll have to make a video on it for fun.

[@jerryhaun5994]

Eddie another great video. You truly are the JEEP JEDI.

[@wayalife]

LOL - now that's funny but I do appreciate it 😊

[@timbutts809]

I did this mount with an Auxbeam gang 8, and it worked well.

[@wayalife]

Really? It just bolted up to my mount and without any issues? I've been wondering if it would.

[@timbutts809]

@@wayalife I had to drill 2 holes for the switch mount bracket, In the Jeep world no problem.

[@wayalife]

Awesome, glad to hear you got it to work!

[@gilbertarnold8666]

Great video thank you!

[@wayalife]

Glad you liked it!

[@rachelwhite4449]

Very nice! I’d love that set up! Totally digging the bracket for both the radio and switch panel.

[@wayalife]

Thanks Rachel 😊

[@mariodesmo]

Been seeing Robbie taking Moby out on some test runs. She's looking good! Would like to see a video on the updates to Moby someday.

[@wayalife]

It's coming and hopefully sooner than later :)

[@lostarrowoverland4067]

Nice! Entrepreneurs rock ... !

[@wayalife]

Thank you :)

[@15jwrangler]

Best Jeep channel on KZbin!! Love your vids!!

[@wayalife]

We're truly humbled that you'd say as much, thank you 😊

[@boobiefett]

You make everything look so simple lol. Great tutorial 👌

[@wayalife]

Thank you 😊

[@williamreynolds760]

Thank you. This video was extremely helpful! Companies should have you do their products videos.

[@wayalife]

Awesome, so glad to hear it and we're flattered by your kind words. 😊

[@bobmathew3380]

Thanks Again Eddie!

[@wayalife]

You bet! Glad our video was helpful to you :)

[@christophermartinez5314]

Nice videos

[@wayalife]

Thanks! Glad you like them!

[@Sniperssx]

Greet works as always

[@wayalife]

Thank you very much! 😊

[@Sniperssx]

Wayalife what type of engine well be bater as here temp sometime got 50 or 60c 20w50 can be better thinner oil can help engine ?

[@kristiancastillothegreenje1395]

For some reason, i knew you were going to do something with those bolts that were sticking out too much, haha great install, love it!!

[@wayalife]

LOL - I couldn't leave things like that :)

[@noblefiend4474]

Great video, can you show us how you mounted your cb antenna on the gladiator? Pretty please?

[@q80aziz]

Awesome 👍🏽

[@wayalife]

Thank you! Cheers!

[@MrSidestick72]

Always a top quality tutorial

[@wayalife]

Thank you, we're so glad you think so :)

[@diegogustavodonosodavila6901]

Chévere felicitaciones