DPS6 Sensor Identification Ford Focus & Fiesta (Transmission Sensor Replacement)

[@tonedriverss8629]

All your videos are extremely helpful and very well done . Much appreciate all you do for us ford owners .

[@crtvexe]

As usual, Ben is just out here saving the world. Well atleast the DPS6 world. Thanks Ben!

[@acdii]

Very helpful. I smooshed the input sensor B wires and exposed the conductors trying to get the trans back in place. I found a replacement pigtail right away once you mentioned the ABS pigtail is the same.

[@schmick63]

Love it, it's already been out for the clutch update in the past and what do you know, she's out again 😃

[@marperf]

Excellent videos. Thank you😊

[@NathanMartin1937]

I broke sensor a removing transmission luckily I was able to find the problem as it was letting me program it in forscan fixed it and running great still!

[@MartinBachler]

Thank you so much for your help Ben. just to make doubly sure all three sensors have a spacer on them or only the top two.? Thank you!

[@BigBensCarsAndCycles]

@MartinBachler just the top two you're welcome !

[@MartinBachler]

@@BigBensCarsAndCycles bro that is the best news anyone has given me in my whole life almost.

[@christianseantulio224]

Is normal when the car is reversing, there is a clicking sound. I don't know if its the tcm. Thank you

[@risuchannel8115]

Great job ben! Just wondering if i have a error code P1934 Engine Control Unit - Vehicle Speed Signal, can i solve the error just by replacing the input speed sensor A (the grey one). I have other codes about ABS U3000(48), but i just want to leave it by when i have the funds to replace/fix the ABS. Thankyou!

[@BigBensCarsAndCycles]

@risuchannel8115 hi, glad the videos helped. I would look for a damaged OSS or OSS wiring. If that looks OK, I'd monitor signals for OSS, rf wheel speed and left front wheel speed while driving

[@jamesgordon6642]

Can I reline the stud in the flywheel after the transmission is in ?

[@BigBensCarsAndCycles]

No, it needs to be pulled back. But I haven't found indexing to be a problem

[@grant_mayer]

Hey Ben, you have been really helpful with the problems I have been having with my ford focus. I am in the middle of replacing my neutral safety switch and I am having trouble getting the connector off and I don’t want to break it. Could you please explain how it’s supposed to come off? It would be greatly appreciated

[@BigBensCarsAndCycles]

I'm glad the videos helped. There's a lock you have to slide up. Then the connector has a release button and comes up

[@ismaelalvarado706]

Recently I found your video and very instructive. I have ford focus 2014 but it's giving me hard time with the ABS light, traction control and speedometer doesn't work. I changed all the wheels sensor already. Front right wheel sensor is not reading, besides that ANY advice. Thank you 👍 👍👍👍 Good day

[@BigBensCarsAndCycles]

@@ismaelalvarado706 hi! Check for damaged wires by the abs module behind the battery tray

[@CASA-AUTOMOTRIZ]

Good evening sir, I have a question which signal use de instrumental cluster for vehícle speed ? The oss sensor or the wheel speed sensor ?

[@antonlimbo]

thank you for this, very informative

[@BigBensCarsAndCycles]

You're welcome!

[@MartinBachler]

Hi Ben, somehow I lost the third speed sensor spacer. Where do I get a new one?

[@BigBensCarsAndCycles]

@@MartinBachler junkyard or ford dealer

[@MartinBachler]

Thank you!

[@SethBalln]

Do you have a link or a part code for the input speed sensors A/B?

[@elgroso806]

Thank you very much !

[@BigBensCarsAndCycles]

@@elgroso806 you're welcome!

[@rajeevnair7578]

Hi BigBen thanks for sharing this video. My 2010 ford fiesta 1.6 T giving me lot of issues with the transmission malfunction message. I went to a dealer service and after diagnose they informed TCM module need replace. The next day when i went to replace the part they informed the ABS also need replace. I feel something wrong and i didnt replace anything after seeing the cost of both module arround 1500$ Still the car is running and speedo Audo meter not working. Some time the car show the message transmission malfunction service now!!! Can you advise me any other reason for this issue or I need to replace the TCM and ABS?

[@BigBensCarsAndCycles]

What codes are you getting?

[@rajeevnair7578]

@@BigBensCarsAndCycles There are a bunch of codes as below P0507: 27-24 U2005: 86-EC 1934: 86-EC U0001: 88-2E U0121: 87-2F U0101: 00 - AE P060A: 47-AF P0072: 94-AE I did a 150k service in another dealer center last week and after diagnose they repeated the same to change the ABS module. Now after service the engine malfunction also showing and dealer saying it all because of ABS module. They said I can use the car but ABS will not work.

[@adrianfoy6790]

Excellent mate !

[@MrMao626]

Thanks for the information!

[@BigBensCarsAndCycles]

You bet!

[@smokeyblack4]

What if it fails the test of the ISS and OSS sensor using an IDS.

[@BigBensCarsAndCycles]

Check for chafed wires next to the sensors

[@keyonrussell9709]

hey love the great work you'r doing, im kinda suck right now but have you ever deal with a 2014 focus with a code p2837?

[@BigBensCarsAndCycles]

Hi, glad to help. If that's your only code (and you dont have P287B) then its probably a bad tcm

[@keyonrussell9709]

@@BigBensCarsAndCycles yes i do see a p287B , the car can drive in forward but the reverse isn't taking along with the second gear. the clutch was updated because i saw a sticker on the transmission stated. any advice on how i can check to fix this please . thank you so much in advance watching your videos give me a sense of relief

[@johnsmith-dm2tq]

hey ben: i recently rebuilt my 6f35 and got it working great, for a few hundred miles. i have a bearing that goes between the 3-5-reverse and the case. the one at the bottom that surrounds the ring tower. do you know the name of this bearing? i found a kit, but i really just want the one bearing and dont know what its called so i cant find it anywhere. anything helps. thanks

[@BigBensCarsAndCycles]

Direct/od to case thrust bearing. It'll be obvious it's the only one with black on one side

[@johnsmith-dm2tq]

@@BigBensCarsAndCycles thanks, been looking for weeks

[@user-jf5jg7drth]

Отличный мастер

[@BigBensCarsAndCycles]

Спасибо. Я рад, что это было полезно для вас.

[@andresquinonezramirez9373]

Is it normal for the transmission to shudder and vibrate hard?

[@BigBensCarsAndCycles]

Pretty much characteristic

[@andresquinonezramirez9373]

@@BigBensCarsAndCycles but it only does it when is in idle also I get that code that says transmission fault service now

[@BigBensCarsAndCycles]

@andresquinonezramirez9373 OK that's not normal. Gotta diagnose the code

[@andresquinonezramirez9373]

@@BigBensCarsAndCycles ok let me tell you the car drives fine and also I have no check engine light on like if something is wrong with the transmission like you would usually get from a faulty A or B Fork or actuator

[@andresquinonezramirez9373]

@@BigBensCarsAndCycles what you think it could be?

[@ahmedayman2175]

Hi