Dr-Doolin Triumph TR3-TR6 Transmission Installation Tool

Another Dr-Doolin Tool explaining how to use the "Triumph TR3--TR6 Transmission Installation Tool" on your car.
#triumph #tr #tr6 #tr4 #tr3 #drdoolin #automotive #britishcar #carrepair #convertible
Go to our website, Dr-Doolin.com for more car parts and products.

[@rossilake218]

I used to put the trans on my lap with engine jacked up. Wriggle it while twisting the output flange. I was in my 20’s back then, now i’m 60.lol. I like your tool, great design. I just drove my Tr-6 yesterday.

[@kathydanswenson8481]

Good to see you again. I bought your MG Engine Rebuild CD from Moss and it helped me wonderfully. All the best.

[@Dr-Doolincom]

Hi Guys Thanks for getting the DVD and happy it helped you manage the engine rebuild. James

[@bernardwarr4187]

Great video and design. Well done my boy

[@fredkelso1089]

My transmission installation tool was me, I realize I was in my 20s but I still did it and my dad started the bolts

[@ericheine2414]

I'm really enjoying your Channel. I've had 3 TR6. I thought I was an expert. Always replace the throwout bearing arm shear pin/bolted with a high tensile one. There is nothing more annoying then having to learn about that shear bolt after you get the transmission in. Thank you.

[@jeffhildreth9244]

Brilliant, perfect timing. I will be helping re-install his newly re-built o'drive box next week. I haven't done one in 40 plus years. This will help greatly.. Thanks from So Oregon, USA

[@andersbriar5227]

i guess Im randomly asking but does anybody know a trick to get back into an instagram account..? I stupidly forgot my login password. I would love any help you can offer me!

[@conorfabian7386]

@Anders Briar instablaster =)

[@andersbriar5227]

@Conor Fabian i really appreciate your reply. I found the site on google and Im in the hacking process atm. I see it takes a while so I will get back to you later when my account password hopefully is recovered.

[@andersbriar5227]

@Conor Fabian It did the trick and I finally got access to my account again. Im so happy! Thank you so much you saved my account!

[@conorfabian7386]

@Anders Briar You are welcome =)

[@mikeowen9667]

Great idea, thanks. One tip is to not forget two bolts are bellhousing dowel bolts 3/8 shank. Mike

[@smoore80]

To line up the pilot shaft, I use a long bolt, with the bolt head cut off and then rounded. The modified bolt is threaded into one of the upper bolt holes, in the back of the block, before offering up the transmission. Once the transmission slides onto the bolt and is square (level) to the back of the engine, the pilot shaft is lined up with the clutch disk and slides in with a slight twist of the rear flange of the transmission (tranny must be in gear).

[@Dr-Doolincom]

Hi, Yes I do the same type of thing from time to time, but not very block has threaded bolt holes and I use two bolts rather then just one, one on either side. As you still need to maneuver the tranny, which on bolts is still quite heavy. If there is only a rear plate rather than threaded hole in the block then I lock them in place with nuts either side of the hole on the rear plate, take them out when the tranny is up to the nut. (don't drop the nut into the bellhousing) But the bolts still require your lifting and sometimes a lot of physical effort to get the tranny in place. I find the tool in this case lot easier, unfortunately I've not been getting any younger for quite awhile now. But yes the bolts work well. TR range of the Triumph's have good access to the tranny at least with the floors coming out. James

[@mikego18753]

Saves your back!Thumbs up.

[@davethompson3140]

Ingenious, simply ingenious.

[@user-ec4kc5jy8d]

Quickest gbox on a TR install ever.... have spent 6hrs wriggling one in...

[@haroldneedlebaum7081]

I had already taken my exhaust system pipes out to remove the differential and used a floor Jack supporting the transmission from below to remove it (support from below instead of from above here). Hoping I can reinstall it the same way. :)

[@seidelswalter]

thankls a lot, i am going to build one for myself, my transmission is out at this time

[@kennolan1219]

Great idea

[@tinkeringwithelectronics]

Wish I had seen this when I had my Spitfire torn apart. Sure would have made putting the tranny back in much easier!!!

[@jimfreyler2944]

Couldn't you get the same result by putting the gearbox on a low transmission jack and rolling it forward once you got the right height?

[@carbidegrd1]

I take it you packed it in?

[@derekmcallister2848]

You can add a link to your website (or directly to the tool) in the comments 👍

[@Dr-Doolincom]

Thanks, good idea dr-doolin.com/tools/30-accessories/tools/1534-tl502