How to build make removable porch panels, vinyl lattice skirt closure panels,composite rot free diy

How to build make removable porch, deck vinyl lattice skirt panels using composite rot free material to enclose the lower portion of your deck or porch. Vinyl and composite porch and deck removable skirt panels.
These maintenance-free deck skirt panels are the best way to afford closure and provide and appealing curbside presentation and they never rot.
********************************************************************
Have you ever wanted to create amazing outdoor landscapes for your home?
I've just discovered this and you need to check it out below:
tinyurl.com/y6owxkn8
You'll get instant access to over 7000 of the freshest landscaping ideas
& videos to help you create your dream landscape...
And you can start in the next 7 minutes!
With over 7000 landscaping designs and ideas, this is the 1-stop
comprehensive database of landscaping themes and inspiration
for your next project.
******************************************************************
Downloadable online Woodworking plans
tinyurl.com/y92fz48b
*******************************************************************
Build deck or porch lattice skirt panels DIY
• How to build make remo...
Ultimate DIY Door Installation PDF Instant download Review
• Video
My Blogger with 45 Pages of awesome tips and techniques for your diy efforts
responsibleremodeling.blogspo...
Please remember to subscribe for more tips
#porchskirtpanel
#compositeporchpanels
#vinyl
#vinyllattice

[@Sawpainter_td]

Thank you, I've had my plastic lattice next to my house for a year!I wasn't sure how to set them. I really appreciate the video!

[@denver3369]

Great video, thanks for the step by step explanation. Looking forward to sprucing up my deck.

[@BrogenPhoto]

works well when you aren't in cold climate. This plastic shrinks so much during the winter in New England it rips the staples right out

[@PHorne-co6pg]

Thank U sooooo much! Looking forward to doing this MYSELF thanks to U!😘

[@ShawnSmith-uy3zr]

About to finish a workshop. This video was exactly what I needed. Thank you

[@Chrdiy]

Hey thanks I appreciate the feedback don't forget to like it and pass it on

[@MO-ml1qg]

Glad to see you teaching the youth,I’m a welder by trade but I love wood working and it’s sad a lot of kids these days don’t take up the trades anymore.

[@Tinyteacher1111]

I taught high school for my career, and I totally agree! My ex is so unhandy, my 37 year-old son doesn’t know how to do anything, and really, he doesn’t want to learn! Everything handy has been done by me.

[@MatthewMcFarlands]

I feel like I'm right there with ya. Thanks

[@wadecormier5132]

so clean and classy looking... love simplicity ! THANKS FOR TIPS

[@Chrdiy]

Thank you very much I definitely appreciate the feedback good luck on your project

[@Chrdiy]

Thank you so glad i can help out

[@Dakiniwoman]

Thank you for your interesting video

[@thomaslavelle7244]

Vinyl buckles when secured to tightly. Large pilot holes and roofing nails works. Should be able to jiggle it around a little bit. The larger the piece the greater the cup!

[@buzoff4642]

The only place I see vinyl buckling on my deck is the thin fascia vinyl over the deck box. The bottom was latticed in, as this video shows, and it has no signs of buckling. It looks like buckling depends on the vinyl thickness.

[@OscarHanzely]

@@buzoff4642 you probably don;t live in area where it gets hot. Vinyl lattice does expand quite a bit on direct sun during summer.

[@buzoff4642]

@@OscarHanzely Incorrect guess. The brutal blazing summer sun is the very reason I have to use vinyl, as paint has repeatedly been scorched off by the end of second summer after painted. On deck, on window and door trim. Thomas is correct, vinyl does buckle, how much and why includes how thick it is. My 1/4 inch and 1 inch thick doesn't.

[@milonjano]

Vinyl lattice has a high thermal expansion. Since you stapled it down, it will look wavy when it gets hot.

[@Chrdiy]

milonjano actually you know it doesn't it's July and I'm doing more work for the homeowner and it actually looks outstanding

[@khunter86]

Great design! Thanks for sharing. How do you make these removable? I was considering using some strong magnets for a clean invisible install.

[@supmofo7538]

Did you use the magnets?

[@sherryberardino5802]

Wow you made it look so easy it helped me a lot thanks

[@Jhoran1314]

The lattice looks great. Do you have a video on how you attached it to the deck?

[@Chrdiy]

Thank you I appreciate the feedback. Sorry no I don't have a a video for that as every deck or porch has a variables. Best advice I can give you is to consider the attachment method prior to building the panel section. Then build your paddle section catering to the method of attachment. If that makes any sense to you.

[@gilgomez7848]

Great video, very helpful and informative. I live in South Florida and want to make a similar rigid framed pvc lattice frame that can be removed, to install above my PVC arbors. This would work however the composite wood frames are a worry regarding waterproofing. See I have orchids hanging from these arbors that get watered twice a day and the water would definitely cover the lattice and frames. Is this framing material available at Home Depot? Is there some other white PVC, vinyl or other synthetic manmade material available that you know of that I could use to frame the panels? Thank you again!

[@Chrdiy]

Ty. Yes all material can be purchased from hd.

[@beckymorgan5515]

How are you attaching it under the deck?

[@willhadden3972]

Very informative, thank you. I'm considering putting lattice at the front of my house and it sits on a slope or slight incline. Should I put a board across the bottom for the frame where the lattice meets the ground?

[@Chrdiy]

Absolutely. Build box framed panel with lower rail angled to contour ground slope. Measure height from top left to ground then top right to ground and make that you frame demention.

[@willhadden3972]

@@Chrdiy Fantastic, thank you for the quick response.

[@lynnrandolph6175]

​@@Chrdiy I had a similar question! If one end of my deck was 36 inches from the ground and the other was 32 inches from the ground. Would get one horizontal 2x6 at 36" high and the second one 32" high right? The distance between the ends is about 80 ft. The bottom of the deck is sloped but the top isn't. Would I do 79' across the top and measure the bottom at the slope? Would I cut any angles into the wood at the bottom of the frame? Or would I leave them flat on the ends like yours?? Thanks for your help! You are making things possible for two single mothers ages 25 and 26!!

[@Chrdiy]

@@lynnrandolph6175 not sure regarding your situation but if you want to Contour to the ground to options they can both 36 and since they're right free you can trench the one part of the board into the dirt and then push your dirt back where should and that it still give you a nice even effect. Or you could have just your lower board to accommodate 32 on one end and 36 on the other then attach the lattice

[@katiecarter9779]

Any tips on how to fasten it to a raised house? I live in New Orleans and have a raised house on cinder block piers that rest on concrete wall foundation. We have termite issues here, so I can't have any ground to wood contact, but want to put lattice up between the piers to keep my dog out from under the house. Should I just hold them in place with brackets drilled straight into the cinder blocks on either end? I have to leave a gap between the bottom of the lattice frame and the ground, as well as the top of the frame and the wood of the house.

[@Chrdiy]

Sure I would build a subframe of 2 x 4 behind the finished closure. The basically a 2 by 4 pressure treated frame attached to the piers across your top head and at your lower portion. Then depending on the span of each section provide infill studs to support attachment of your fabricated panels. Of course your panels will have to be custom made to fit particular areas. But you'll fasten your rot free lattice frames direct me to the pressure-treated studs

[@katiecarter9779]

Thanks!

[@VinceEspositoJr]

How did you afix this to the the deck? Did you have a nailer running horizontally? Thanks.

[@Chrdiy]

Yes top and two sides

[@christopherham113]

What kind of tool can I use to cut vinyl lattice? What kind of tool was that in the video? I have a table saw on hand and was wondering if you know of any type of blades that will cut through vinyl as nicely as yours did....

[@Chrdiy]

Hi Chris thanks for your question. In the video we're using the standard scroll saw word jigsaw with a rough cut Edge blade cutting very fast little bit more time consuming than a table saw here's the best if I can give you. We're Home Remodeling Company so we're constantly cutting siding and we use a table saw for that which is also vinyl but it is thinner than lattice. The easiest practice if you want to use a table saw is one of two choices. First you can use your existing blade if you reverse it basically taking it off turning it around and reconnecting it to the drive whereas when you turn the table saw on the blade spins properly but it's backwards, this you can cut vinyl siding and lattice with Ease. the only catch with this is that it must be a carbide tip blade in order to work. Secondly purchase a new blade which is a fine-tooth blade for cutting flies or trim. this is installed to the table saw as a normal routine blade change. the ideal here is that the fine-tooth closely-knit saw blade doesn't grab regret the somewhat thicker lattice. the con to this. you may experience gumming on the blade and therefore you're probably not going to use it again for wood. The jigsaw takes a little longer but I just throw The Blade away when I'm done. usually there's no gumming on the jigsaw blade. Hope I'm able to help you here good luck and please feel free to subscribe to his channel we're always looking for good feedback

[@christopherham113]

Vincent Dramis Thank you for your help sir!!! I really appreciate it!

[@bmanh2355]

is that a brad gun nailer? looks like a staple. What is the type or "brad" that you are shooting? Model # size? guage? Thanks!

[@Chrdiy]

Brad gun. Mine is a Bosch. 18 gauge 3/4" galvanised brad

[@blacbeauty8871]

Will this color last long on my deck compared to the original deck colour. Nice job by the way

[@Chrdiy]

The color is in the material so it's not like paint that's how it's made so it should be very long lasting I've never had issues with it when it's filthy you just power wash it

[@GracesFavorites]

Living in FL with screen porch. Do you know how/what kind of hooks I can put into the metal screen frame so I could easily hang a vinyl lattice from time to time for privacy?

[@Chrdiy]

Sorry I really can't advise especially not knowing what's there

[@racer008racer]

My grandfather attached them with hinges so they could lift up, and could be removed just by pulling the pin

[@melissawallace9745]

Thanks. I've been trying to think of a way to remove because I store things under my 4ft high porches. Thought of toggle type hinge thingies lol and hooks... never thought about the hinges... yay

[@AinSophAur31]

Curious.. maybe I missed it but what type of material is the framing made of? Is it just pressure treated that’s painted? I have to do mine which is under a concrete deck. Going to lay a flat 2x4, tapconned just trying to get the framing idea right. Your design is very good. Just curious of the material used. Thanks.

[@Chrdiy]

Yeah no problem 100% composite board right free no wood or PVC trim board with a backer frame of pressure-treated 2 by 3 or 2 x 4

[@Tinyteacher1111]

Can I do this horizontally as a small fence to keep my dog out if a muddy slope? I’m 68, 4’ 9”, and have back issues. Think I can? 🙏

[@Chrdiy]

Might be easier to get a handyman and direct him for what you need. Stay safe and well

[@Tinyteacher1111]

@@Chrdiy Easier said than done around here! Hard to find handymen! I’m the handiest person around here! Lol! If I just wasn’t so puny!!!

[@lisaln3987]

Ok so I made my panel out of pressure treated fence boards and cedar louvered shutters instead of lattice. But now I'm trying to figure out how to install it on the brick columns with hinges

[@Chrdiy]

You'll need to attach left and right vertical pressure treated 2x4 plate to the columns. Inlaid to a proper depth to accommodate the panel thinkness once mountrf

[@kingsofdetroit]

A link to the material you're using would be greatly appreciated. I've searched and couldn't find the material.

[@Chrdiy]

Your friend has shared a link to a Home Depot product they think you would be interested in seeing: Veranda 4 ft. x 8 ft. White Garden Vinyl Lattice www.homedepot.com/p/Veranda-4-ft-x-8-ft-White-Garden-Vinyl-Lattice-73004026/100011154

[@Chrdiy]

Your friend has shared a link to a Home Depot product they think you would be interested in seeing: Veranda HP 3/4 in. x 2-1/2 in. x 8 ft. Cellular PVC Trim www.homedepot.com/p/Veranda-HP-3-4-in-x-2-1-2-in-x-8-ft-Cellular-PVC-Trim-H190JWS5/100243235

[@OscarHanzely]

single 4" board 8ft long of that PVC trim material costs $18. Thats quite expensive way of building a lattice. Granted it won't rot, but they sell cheaper plastic channels that cost $7 for same length.

[@brijesh10]

What size and what type of those boards are?

[@Chrdiy]

brijesh10 basic 1 x 4" rot free composite. I buy 8' lengths....2 8' lengths will build 1 panel

[@brijesh10]

Vincent Dramis thanks for your reply...there are so many different kind of boards and I am not handyman so don’t know which one to buy. would you mind me to send a link from homedepot or Lowe’s where I can buy it from

[@melissawallace9745]

Nice. But how is it removable? I want to be able to remove mine when needed.

[@Chrdiy]

It's attached at each corner with the eye hook and

[@amcdonald4789]

wrong! If you're going to post videos online on how to install products at least follow the manufacturers recommendations. This will fail within the first year. The product is intended to be a floating system. No staples.

[@Chrdiy]

Wow really, that's why two and a half years later it's still in perfect condition not much value in your opinion