FULL INSTALL! Focal, Klipsch, Denon, Epson| Dolby Atmos 5.2.2

FULL INSTALL! Focal, Klipsch, Denon, Epson| Dolby Atmos 5.2.2 Contact us today www.dreamediaav.com - 972-322-4607 - [e-mail]
dreamediaav ** CLICK show more**
- dreamediahometheater.dfw
Music Credits go to:
Music by Joakim Karud / joakimkarud
Keep On Going by Joakim Karud / joakimkarud
Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0
creativecommons....
Music promoted by Audio Library • Keep On Going - Joakim...

[@steveke8mdn509]

You need to measure diagonally to make sure something is square . Not top to bottom and side to side. Look it up if you don't agree. Love the videos and your professionalism, very neat and clean installs. Thanks. learning a lot about home theater.

[@lesmatthews459]

You are so right!! Something I've known for years (being in carpentry) but total missed it!! Glad you caught it

[@larrywallace31]

Love the work you did on the pre wired home... Made it work.... I definitely need the same set up for our home

[@giddlegump]

Measuring the screen side to side and top to bottom won't tell you if it's square. Check It corner to corner both ways. If those two dimensions are equal, then it's square.

[@adampatterson3188]

Yes very true.

[@PAGEREFURBISHMENT]

100% correct

[@mohammadabdalmajeed2331]

what is the square ... do you really know it ?

[@Nostromo_1]

They must’ve skipped that day in geometry class.

[@TMERUNNR]

As a HT Enthusiast, I love the customers reaction. Always a blast to demo and watch movies with friends when they come over, I'm sure it will be the same for this home owner. Great job Dream Home crew👍

[@Dreamediaav]

Thanks for the nice comment! We love seeing our customers face light up when we fire up the system!

[@keepingupwiththejones2933]

You know you love Dream Media AV if you watch all 47 minutes. Drop cloths, booties and masks show how much your care for and respect your client's homes. Beautiful to see that from a professional AV install company. Great choice of gear for this room.

[@johnriley8713]

The toner tool is nice. If you're without one and you really need to "tone-out" a wire to a speaker, tap the bare wire ends onto the + and - of a AA/AAA battery, you'll get a clicking sound out the speaker. AA/AAA are only 1.5 volts so you're way under the capacity of the speaker or the wire.

[@dedskin1]

These guys are pros , But im a bigger pro in Audio , working with it for 15 years , so i can tell you , It is wonderful to have Speakers in Wall , that way you dont have Wall reflections from the backside of the speakers , witch is of course out of phase from the front wave , and is real bad , so its good , you can even leave the speaker port in the wall opened so that sounds from back goes out , not staying in the wall . But Speakers dont have to be on ear level , what they should be is aimed at the listening spot . You dont just put them in wall , you aim them . Down and to the left or right . So what should be done here is a kind of tilt towards the listener on side speakers , i guess 2 is enough , no need for center one . Other then that , its prefect .

[@GhostSal]

Looks great, one recommendation for the DIYer use twisted pair speaker wire. The non twisted wire acts like an antenna that picks up too much interference (even from your electric and lights). Using the right wire will benefit your sound experience tremendously.

[@luisjavierjuarbe7446]

Hi. I was watching this because I wanted to catch some ideas for a 5.2.2 setup. I don't know if I missed something but this looks like a 5.2. WHere are the other 2 and where they go?

[@Dreamediaav]

2 subs 2 ceiling speakers

[@cableguydan]

@@Dreamediaav that’s not 5.2.2. That’s 5.2. 🧐 Dolby Atmos 5.2.2 would be 5.(ear height) 2. (Subs) 2. (Height speakers)

[@rohitmisra.44]

I could find only 3.1.2. or did I miss a sub and two rear speakers?

[@luizwilliams4842]

@@cableguydan Right! These guys are professionals and don't know the difference between 5.2 and 5.2.2?!?!

[@cableguydan]

@@luizwilliams4842 yes - it’s a bit concerning. 🤦

[@jimmymcgill5572]

The center speaker should be behind the screen at head level, front left and right should be lower as well wtf are you thinking

[@jibreeeeel94]

Really good video! I don’t live in the US and these kinda videos help when DIY-ing!

[@hstudio30]

Awesome combination of gear. Your videos motivate me to keep going with my channel no matter how hard it gets. Keep it up my dude!

[@bikesandbeats4693]

Why does the projector have to be dead center? My 6050 is about 6-12” off center (due to stud placement) and there is tons of lens shift to get the picture perfectly onto the screen with the projector leveled and square with the wall. I have a 110” screen.

[@sapsapen]

Intresting way to check square. “Do it right” lol

[@valvemonky4734]

the correct way would be to measure it corner to corner diagonally

[@erikriemer299]

lol

[@Mudcon]

Glad to see thesee type videos again.....

[@jlane7731]

Super clean install guys. You guys are true professionals. I am a HVAC guy and an audio guy as well. When you make shit look that easy, you know you got your shit together. Good job brother.

[@alokdadb734]

99% awesome.. 1% pending is the finishing i.e. the visible cable of woofer and projector

[@grahamoliver3306]

Missed these vids. Glad they’re back.

[@uMalice]

This is a big help for that final tune-in adjustments. nice video!

[@keepingupwiththejones2933]

I love hearing how emotional the client is at the end of the video!!! 🤩😍 Dream Media AV truly making people's dreams come true!!!

[@chrisshepard1242]

My company installs this system all the time. Not the exact same speakers but screen, projector, mount and remote! 5.2.2 Atmos? Did I miss the height speakers somewhere during the install process?

[@johnvore]

As usual, you are also a very good teacher when you show us everything.

[@shockjock35]

To measure square, you should measure diagonally from corner to corner.

[@keepingupwiththejones2933]

That is the easier method but the measurements Zach took will confirm that the projector frame is square.

[@kaelmedia8693]

Tristan Jones You do know everything as well Tristan😄👍

[@donfrankie]

@@keepingupwiththejones2933 No it doesn't. Have you ever heard of a parallelogram?

[@keepingupwiththejones2933]

@@donfrankie please go back to watching Wham videos 😅🤣😂

[@donfrankie]

@@keepingupwiththejones2933 tell me how measuring four sides is checking for square?

[@GurtejSingh1000]

the centre channel is a bit off ..being ocd i probably would have install the projector before the centre channel.. make sure its square w the left and rights... but otherwise amazing walk through great work!

[@MarkBurfeind]

Awesome video! Have you guys looked into using 4K screen paint instead? We use that for most of our larger areas with projectors.

[@David-hy7rn]

Why so high with the L&R's?

[@milwaukeeautoworx]

To check square you measure diagonally corner to corner in an x pattern. If they measure out the same, it's square.

[@Robertb00]

Was the room sound deadened? Looks like they planned ahead but did use any SNS or other products

[@melvincooper8926]

Why do you no longer list packages on your website?

[@Dreamediaav]

we are redoing the website

[@UBAYBE]

You should list the speakers and materials used with links.

[@brandonculler8550]

Oh how I have missed the install videos!!! Thanks for showing the details of the IR using Ethernet!!! Also love all the DIY tips! Great seeing some of the new focal speakers in action. Why do you think the new 300 series doesn’t have a sealed back?

[@paulcarroll627]

Great video. Just curious as to why the customer wouldn’t put a few extra speakers above for Atmos ?

[@herefordjohnson2952]

what happen to the 2nd sub?

[@Djekkie-gj7jz]

No sound dampening in the room. There must be a lot of reverb. Left and right front speakers have to be at ear level and if possible in one line with the center speaker for the best result.

[@LION_HEART1139]

this guy is always happy to work, i really like it the way he work, great work, i wish they start to work in houston area also

[@ryanscanlan9875]

This company is lucky to have you mate - fantastic customer service/sales/product knowledge etc. Keep it up brother and you will go far!

[@hugogomez110]

How big is that room?

[@Batblendz]

can you guys build in Bakersfield Ca

[@integratedtechnologies4215]

so whats the cost for something like that including installation.

[@paramount4188]

Curious, why aren't the speakers placed behind the screen? My understanding is that a perforated screen allows the sound to travel through and you get to place your screen at the desired height as well as all the speakers. If these customers opted not to do that Im curious as to what the price deifference is between their screen and one that allows behind the screen placement. thx

[@tobysalter7443]

So many great products wired with cheap cables and not a laser level on site!

[@chrislangston929]

Thank you for putting together all the details and walking through the entire end-to-end process. This gives a true realistic understanding of what it takes to pull something like this off. Where can I find the details of the equipment that you used for this install?

[@Dreamediaav]

we have made several videos on install. Check them out and follow along

[@djmattyb]

Could you provide a link to that adapter you installed that you said was to protect the projector from a lightning strike?

[@fotophotographer]

Curious, why mount the L&R so high? Also, why not mount them behind the screen?

[@wkbillweston]

Disagee on checking square. Square is checked measuring corner to corner.

[@dana2750]

May I suggest using a 4 foot level to level 120” screen, a 8 inch torpedo level is not very precise for that length of screen. Use the torpedo level for leveling the projector and speakers/grills etc.

[@Hope4NewDay1]

"We are going to be using all the top manufacturers in the industry. Focal, Epson, Denon all the affordable stuff" Klipsch: 😢

[@ramonbarajas2813]

Only thing left to do in that room is acoustic treatment an paint the entire room with rosco tv black paint or black velvet the entire room. I chose rosco tv black paint for my 5050UB, amazing PQ

[@300bo8]

Only thing I disagree on is the banana plugs comment. I love me some banana plugs. Makes life easier IMO and never once had them fall out or cause a problem.

[@luvuyomnyute1304]

Love it love Zak I am watching u from South Africa always turned on nice explanations thanks Zak

[@vodotech]

Left and Right Speaker above head level ?

[@slatibaadfast]

all you need is the loud suit, a wavey armed mascot and a heap of very cheap used cars. sold your soul a LONG time ago

[@vijoyem1]

One doubt. Why do you keep the front and right wall speakers at the head level of standing person. it should be at the ear level of sitting person, rite.

[@markwaid1071]

I didn't see any seating in there so I think the speakers are at ear level as everyone is going to stand up to watch films

[@UGotTheFunk]

@@markwaid1071 🤣

[@im_just_another_guy]

Subbed! Great content and awesome technicians!!!

[@TackleAdvisors]

I loved having to educate the contractors on how av works......which was a benefit working with familiar contractors/ subs ......That and the rockers never roto zipped my hdmi cables when cutting in boxes again..lmao

[@AtmosMusiclovers]

Nice video ,super , tell me my douts projecter screen best is white or gray ,pls tell me sir

[@zoki1911]

What u think of Monitor Audio Soundframe 1 ? I consider to buy these or Focal 100 iw lcr5 . Thx 👍✌

[@mrglasses8953]

Monitor Audio are equally good.

[@ThujanK]

The Epson 6050ub has lens shift. There's no point in remounting and drilling more holes in the ceiling when the projector specifically has a feature to combat that issue.

[@maxwellnylon6041]

I would’ve wanted the speakers behind the screen

[@JoseRodriguezFrio]

that's cute aesthetically but the speakers technically have to be placed at a wider angle than the shown screen for proper audio angle to ear

[@henny1256]

@@JoseRodriguezFrio Actually, I would not mount the mains so close to the side-walls. Too much reflection, which will distort the sound stage, potentially causing phase problems.

[@keepingupwiththejones2933]

If you don't know what you are doing , don't be stupid, hire a professional 😅🤣😂. I love Zach's authenticity. He tells it like it is. Very detailed installation of a center channel speaker when you have a stud in the way to notch out the stud. One of your best videos to date. Thanks for sharing.

[@spyplane3979]

I need to visit you guys cause I need help with choose right speakers

[@DigitalDonAV]

Acoustic Treatments?

[@MrSkyl1ne]

Matt from the Off the Ranch/Demolition Ranch youtube channels is renovating an abandoned mansion and they are about to put the drywall in, it wouldn't surprise me if he would be interested in a sponsorship deal with you guys to trick out the new house with some goodies. With a couple of million subs he could probably also increase your subs by a lot. He lives in the Bourne TX area, though not around the corner, it's doable. I would love to see you guys working together.

[@Dreamediaav]

ask him to reach out

[@MrSkyl1ne]

@@Dreamediaav sure did, upvote my comment on his latest video ;) kzbin.info/www/bejne/gXrZnImFiNOSrKM

[@derekr5327]

You recommend bare wire to speaker terminals vs banana plugs? Because “those banana plugs will fall off eventually”.... what??? 😳😳😳

[@Nostromo_1]

I have used banana plugs in Amps for over 30 years. Not once did one ever fall out. They are designed to stay in.

[@daveh4925]

Great job, to speed up cuts use an oscillating saw and quick change hole saws - they are inexpensive and quick but you need a bit of experience with drill control but im guessing you use plasterboard saw as you can feel if you hit anything!

[@cubinn149]

I got the harmony one remote with hub it works great but app sometimes refreshes

[@AS-jh1td]

I am building a new home on the Canadian side. I cannot afford what these guys put in their baller homes. I want something under 2k for a living room 5.1 system (in wall). Can you recommend something please?

[@marcop680]

Pretty good job guys, but how can you install the centre channel so LOW compared to mains (that are too high..)?? perforated screen is (WAS) the way..

[@Dreamediaav]

not true. this was and is.a budget conscious room. Acoustic screens cost more compared to traditional screens.

[@darryndewar]

Wouldn't you measure diagonals if you wanted to check square?

[@keepingupwiththejones2933]

If your horizontal and vertical distances match at the locations that were measured there is no need to measure diagonally. You have already confirmed that the frame is square. Measuring diagonally down from each corner would do the same and be easier since you only have to measure twice instead of 4 measurements.

[@sapsapen]

@@keepingupwiththejones2933 this is flat out not true. You can have the same measurements on all sides and be out of square. Its called being racked

[@derekreed8366]

When you have excess wire with in ceiling speakers, bundle it up and set it aside. It could possibly touch or settle later on on the woofer and rattle. Better to be safe. Love my 6050. It is dead center but as i found out when setting it up, it does a hell of a job keeping a square image when shifting. Great vid guys. Booties for.....some guys?????

[@kirius7079]

The front speakers are not located correctly, it was necessary to install the sound-transparent screen and insert the speakers behind the screen, the left and right speakers are lower, and the center is higher, at the same level as the side

[@asimmahmood397]

What is the room size? Are these focal 100 big enough for this size room?

[@fernandoceruso1784]

Hi Zack, my name is Fernando and I am writing to you from Costa Rica, I am setting up my media room with a low budget and I wanted to know your opinion about which projector to buy between the benq ht3550 and the optoma uhd50x for a 136-inch screen, it is in the living room but only to watch movies at night I would appreciate your help in advance

[@bikesandbeats4693]

I’m running a 5.1.2 but my receiver is capable of running a second sub. What’s the purpose of two subs? I’m running a single 15” Klipsch.

[@harshgw23k]

what do you do for sound proofing the room? I imagine with that kind of setup, the neighbours are gonna call the police, atleast in a townhouse scenario

[@balrambalram793]

JBL JBL ke sath per joint ho sakta hai

[@BikeRiderMaster]

Muti tom o seu trabalho, pena que eu moro no Brasil. Your opinion: YAMAHA RX-V6A vs DENON AVR-X2700H

[@markg7963]

Trick for anybody to calculate the center of a measurement.... example would be something that appears complex. Say you need the center of a 15 3/4 measurement. Since it’s the odd numbers that create the problem, rewrite the measurement as it’s equivalent to the nearest even inch. So 15 3/4 becomes the same as 14 plus 4/4 plus 3/4, which is 14 7/4. Now, half the 14 you get 7, and half the fraction by double I get the denominator, 7/8. So center becomes.. Total. 15 3/4 Rewrite. 14 7/4 Center 7 7/8 Other examples. 123 7/8 overall 122 15/8 61 15/16 center 77 5/16 overall 76 21/16 38 21/32 center The trick is halving the fraction is same as doubling the denominator, and rewriting or visualizin the fraction from the previous even inch, not using the odd.

[@keepingupwiththejones2933]

Yeah.... that seems a lot less complicated 😅

[@dancollins8338]

I'd use a Yamaha amp over a Denon anyday!!

[@sweetlink1]

Kindly guide yamaha best floor standing speaker ns 555 or nsf 350 for av amp yamaha rxv 585.

[@ItsMeJbird]

Why no Bluetooth, WiFi control on Equipment, IR is cool just seems like more leg work? Thanks

[@adampatterson3188]

Hey seriously thanks guys. Badass install. That was really cool to watch., and this is coming from a really old school HIFI geek. Keep up the good work!!!

[@sandeepkrishnan5105]

Is there a name for the paint you use in the room for maybe improve the reverbaration

[@samuelybarra15]

Looks great, though if I were spending the big bucks I would go with the acoustically transparent screen and get that center behind the screen.

[@tommyjones7343]

I Love That Part When James Was Cutting Out The Hole For Center Speaker, And You Sped Up The Camera 📸. You Guys Are Awesome Zach!

[@nachowifi2181]

"I cant tell you how many of these grills get messed up every year" - Millions of grills are being painted improperly and wreaking havoc in the Home Theater Eco System. We can all make a difference.

[@Dreamediaav]

knowing is half the battle. please make a donation to symbolically adopt a wild grille to show your support

[@ErgosProxy]

@@Dreamediaav 😂

[@wilsonnarayan7269]

Are you putting in another sub is that why the other one is to the left? If they are going to keep just one sub would it be better in the Center just under the Center speaker?

[@lolkenen6249]

Great job. All it needs is acoustic treatment

[@rastislavvrabcenjak6898]

why Logitech Harmony pro 2400 it is not possible to buy in Europe, onlyHarmony elite ?

[@BillSands2112]

Very nice to see you guys installing this system. Sweet!!! What is the cost for all of this?

[@jeffery.shunter6624]

Fantastic Job

[@Dreamediaav]

Thank you for you for viewing!

[@stevemazz3121]

Fun to see the first 4 or 5 post explain how to properly square the frame.... measuring from corner to corner after measuring from side to side...

[@stevemazz3121]

Also an electronic stud finder would be useful....

[@googleuser1522]

Acoustically transparent screen and center channel dead center of wall, vertical orientation. It’s the best way.

[@Darkangel-sw9lm]

Why are the rears in the ceiling?

[@balachandran5761]

Look's Clean and pro work bro 👏👏👏

[@Nostromo_1]

Nice room. To bad it will never sound right with the lefts and rights so high. Even an amateur will tell you all three speakers across the front should have the tweeters close to ear level.

[@jimmykaka89]

I can’t believe a professional company would install the fronts like this it just doesn’t make sense at all.

[@indymajor7372]

This is the second install video I have watched where the texture from the wall has chipped off near the edge of the speaker, would a faster blade electric saw reduce the chance or possibly taping on the outside of your cutline?

[@dejangolja6910]

Same installation, just different video.

[@mikej6565]

It's probably best to run a razor knife along the cut line before using the saw.

[@jensbornermann9748]

happy video watching! dont mind the huge fan noise coming from over your heads, your av receiver is loud enough to noise it over

[@G1lgamesj]

How to get that square screen on the Epson???

[@cincydreamhomes]

Great install. Wondering what wireless subwoofer kit was used here.

[@titosirj6262]

Obviously Klipsch

[@cincydreamhomes]

They mostly push the SVS products lately