How to Make Absolutely amazing car INVENTION

Saze i Use
21.5 x 4.2 cm
1) 60 cm
2)100 cm
3) 140 cm
4) 160 cm
Homemade KneeBlades Durable Rolling
• Homemade KneeBlades Du...
Know More Subscribe here:
/ drhacker-com
Instagram
/ dr_hacker87
Business or Cooperation
[e-mail]
Check my Other videos :
/ @diy.invented

[@lovelife1070]

For al the people hating , you guys realise there are people who dont have money or a store nearby, to buy something they probly only gonna use 1 time. Its a good easy diy that you can use as firewood when its done.

[@thearifabduljabbar]

Ma guy knows me❤

[@СергейПопов-ъ3ж]

Начало поделки. Потом покупка печьки.

[@kendalgee5808]

He got money for a Ryobi drill and those adventures of narnia wizard of ozz rolling villian knee pads. He got money for car tools. He just chooses to make them cuz he does wood work. As a mechanic diy, now into wood working, i regret buying my expensive mechanics drawers. I could have made them out of wood.

[@izzydizzy1115]

I made a similar set from scraps I had left over from a construction project. Mine are taller and I put rubber pads on the very bottom board so they don't slip on concrete floor when driving up on them. Very stable and it was a fun project. I do like the idea of wheels to move them around. I'll probably add them to mine. Cheers!

[@Lima-Hi]

Great idea, make sure to block the rear wheels for safety.

[@ron5935]

I built mine in 1972 and still use them today in 2020. Lets see 4 times per year x 2 cars = 8 x 50 years = 400 oil changes + other repairs. Strange things breaking on my cars is a problem that went away 50 years ago. My 2004 Buick has NEVER seen a garage. I share the ramps with my son now.

[@paulkanyoka9604]

I think that vertical board should be strong or reinforced so as to act as a stopper too.. Not everyone has the skill and technique to stop the car before it breaks that board

[@dancahill9122]

As far as not having the skill to stop............break the board and run of the end onto the frame a time or two and I guarontee the driver will learn, real quick like ! ! 😂😂😂😂😂😂😂😂😂😂😂😂

[@richardwallinger1683]

nice video . I use a throw away piece of cardboard for lying on .. easier slide at 75 years not so young mechanic .I fabricated two trolley jack fixtures to jack up my Citroen C6..

[@GrnXnham]

The thumbnail caught my eye when I noticed that these ramps are nearly identical to the ones I made myself about a year ago. About the only difference is that I haven't put castors on mine. I made my own SAFE ramps after my full size truck crushed my store-bought ramps despite the ramps supposedly being able to support the weight. No way solid wood is getting crushed. The only drawback is that they are heavy. And everyone here keeps making the comment.."Why not just go out and buy some ramps?" Answer..."Because they suck!"

[@rickykraus7450]

I made a set of ramps like this around 15 years ago. I didn’t have any low profile ramps and some left over 1x12’s.

[@jdilksjr]

@Ryan Hogan If you would drive past the end of these, you would also drive off the end of store bought ramps.

[@jeanpanaccio4484]

Casters not castors!

[@jimpie231]

Great idea, my Dad made some like yours, however, they were too heavy, as are yours. Over the years I bought 2 sets of metal ramps, and broke both sets, damaged the plastic parts on the car, etc. The ones I made are shorter and use 4x4’s and studs, they’re lighter and shorter. I’ve been using them for 25+ years! I use them for oil changes, inspections, and changing parts that will be easy to access! Jim

[@jimpie231]

Wooden ramps don’t break, and are very forgiving......

[@peaeye3467]

Those must be those new safety flip flops I’ve been hearing about. Perfect for carpentry work and pretty much any work with power tools. 😆

[@sisyphussapprentice8976]

There are some very brave bunnies out there.

[@rig_ekb]

А я брус 150*150 взял, сделал пропил и прикрутил в наклон доску, норм получилось

[@robertheinkel6225]

I built a similar set of ramps about 30 years ago, but made mine with removable ramps. Much more versatile. Years later during Desert Storm, I had to change the nose gear tires on the KC-135 aircraft, without the proper nose gear jack. I built another set of ramps using 2 x12s, without the removable ramps. We towed the aircraft up on the ramps, then used the Main landing gear Jack on the nose gear. By putting the plane on ramps, it raised the nose tires enough to to get the MLG Jack between the tires. We ended up changing several tires using the ramps. When you have an aircraft weighing in at over 144,000 pounds, you do what you go to do to get the job done!

[@PrintPixeltr]

@fartpoobox ohyeah nice point.

[@kennethpayne9694]

wow that's amazing they are just like the ones i made 40 years ago

[@СергейГарифьянов-в7ъ]

Я таким пользуюсь с 2005 года, правда у меня упор обвязан верхней доской проволкой в случае если не успеешь затормозить упор не отвалтся и машина не съедет.

[@kenallen512]

Replace the revolving wheels with fixed (non revolving) wheels, it will move forward much more easily.

[@jeffnarum1373]

Second that. They would go from push to pull way easier.

[@cherylmedeiros6287]

What6the purpose of the wheels? To move this contraption?

[@jasoncoleman6378]

I thought the video in the beginning, was a promo for the cordless dewalt miter saw 😄

[@mrpremier4bbg]

Wrong!!! It may be good for the first few uses, but eventually the wood will start splitting, and the first time you run over it, and a piece splits away, Those screws are gonna go right through your tires! I know from experience 🤦🏻

[@johnkaranja2897]

I would use a wider plank, about 10” or 12 inches. More stable. And for you haters, some people do not live at the end of a Chinese assembly line waiting for products to be made., or they cannot afford. In fact, with a saw and a tree trunk, you don’t have to buy the wood even

[@dangol6848]

Just mind blowing. Never been done before.

[@NuvoVision]

😂😂😂😂

[@carlosruano75]

😂😂🤣😂🤣😂😂

[@Sonic-sh2vh]

Yes one of the greatest engineering achievements of the modern age. It’s mind blowing that this concept has never been realized.

[@toobad9946]

@@Sonic-sh2vh Someone will just steal this idea and make some out of steel or plastic or something!

[@dancahill9122]

Except maybe 10 or 20,000 times.😊😊😊😊😊😊😊😊😊😊

[@southernman5839]

My Dad made a set of ramps years ago. He sandwiched his together on the sides bolted with rods and nuts all counter sunk. He cut the slope you drive up on . Wood is heavier but there’s no danger of the wood collapsing under that weight. Nice job on your ramps!

[@ibrahimhaydar7062]

Hello pro You must concave the top end with a protrusion to hold the tires in place after climbing to ensure the truck does not slip. Have a good job ... New ideas come only after the prototype.

[@tomharner83]

Loose the swivel casters... Switch to straight casters... They'll be much less of a pain in the ass.

[@Team33Team33]

Lucky the ramps weren't his idea then isn't it, or else we'd have something else.

[@robertawhitfield2414]

Great job 👍...Now add you some straps where you can pull & push your ramps 👍!!!

[@steffenwiebach8972]

Achherje wenn ich einmal zusammen rechne Holz, Schrauben, Rollen, Werkzeug, Strom und natürlich auch Arbeitszeit, muss ich sagen ☝die "Erfindung" ist ne Luftnummer . PS. Aber Respekt für die Abrufzahlen des Videos 😉

[@mistermikeanson]

Chock the rear wheels!!!!! Don't rely on the parking brake when you are underneath.

[@sleepinglioness5754]

Agree. This is very important.

[@dough9512]

@Matter Do Obvious.

[@jaypreddy8185]

Amazing! I made a set just like this (no wheels) 25 years ago.

[@carlomezzatesta4659]

That idea has been around for 2.5 Thousand Years how do you think they built the pyramids and Stonehenge

[@babyboymoen2464]

I cant believe somebody called this amazing. I cant believe i watched the whole thing.

[@dancahill9122]

To anyone other than Americans it is amazing. i.e. foreigners, Mexicans, ect, ect.

[@Doctorwankinstein.]

This is many things..... amazing is not one of them!!!

[@dustinlerch9272]

I can’t believe you commented on a year old video.

[@Doctorwankinstein.]

@@dustinlerch9272 I'll watch and comment whenever I like!!!

[@BATTLESCARS75]

I can't believe those knee skates... ridiculous ha

[@davee6161]

10:51 seconds that I'll never get back. My grandpa made a set of those back in the 40's that I still use. Seriously video could have been about 30 seconds long.

[@cesaralvarez5982]

The funny thing is you can buy these for a fraction of the cost of the wood, no labor, and already finished.

[@StupidEarthlings]

@@cesaralvarez5982 i came here to say the same thing. Thats KZbin, ya win some, ya lose some.. seem to be losing alot these days.

[@scottgaston742]

Amen brother

[@randybethune5854]

You watched for 10 minutes?

[@davee6161]

@@randybethune5854Shit, I'm busted.😅 Actually no, I fast forwarded thru most of it.

[@goodjah8946]

The most interesting about this upload was the "knee carts" since I never seen those before... Fun fact(that really says more about me than anything else), but I was seriously wondering how those small wheels where going to support the weight of the car! Haha! This since I really saw an application for the thing..like drive onto and then be able to ajust the cars position sideways which could be of use in a small garage/shop...now I just feel plain stupid;-)

[@subbernh5192]

You can buy what you're talking about. The they're made of steel and I believe around $80/pr. Think they're also used for moving ATVs and snow machines-a bit less costly

[@jameswhite1319]

Thanks for sharing

[@More-Space-In-Ear]

I would advise you to place a block under the back wheels next time you do this, your up a hill and it’s quite easy for the van to roll back...

[@RVH-io3dr]

Solid, safe and will last forever. Great Idea!

[@ArchGBUStanton]

Wow, took for ever but at least I got to hear Darth Vader breathing for awhile.

[@medicalnegligence]

Very nice. I would suggest blocking the rear tires.

[@reubendobbs8011]

Yes old hat, should use glue as well as screws.

[@yunfenglu6619]

I d have more confidence working underneath with this ramp than those strut type products, steel or plastic regardless, because its fully SOLID.

[@colsanjaybajpai5747]

Very useful build. Does this thing turn the car into a tractor. 😄😄😄😄

[@fabfabber]

I bought a pair of composite Rhino ramps at Auto Zone rated for 12K lbs about 15years ago for about $28. They even have a rubber foot on the end to prevent sliding. Strong and not heavy.

[@Twelvestar64]

I made almost the identical thing about 23 years ago. I used 2" × 12"

[@navigator8722]

Front or rear wheel drive? It can make a difference, pushing away the ramps.

[@tomt.8275]

Excellent. What was the length and thickness of each board and what was the angle of their cutting?

[@conway7812]

Wow great idea. To all the people adding negative comments I guess your dads didn’t shoot a video 40 years ago to let us dummies in on the secret. I’ve been pricing racing ramps for my low clearance mustang and every one wants a lot more than $40 bucks.

[@ericschneider7554]

If the purpose of the vertical piece is to stop the vehicle from driving forward too far, then I would suggest a design mod. Those horizontal fasteners will pull out under the load of a vehicle. Put a couple more horizontal pieces at the end of the ramp and install fasteners vertically. The sheer strength will be a lot higher than the withdrawal force your currently counting on.

[@vprn95]

Also, will the hammer action of the drill ( seems to be the norm now) effect the tensile strength.?

[@ericschneider7554]

@@vprn95 use of an impact driver in soft wood such as these 2x won't weaken good fasteners. However, one can definitely weaken or break screws made of aluminum or long drywall screws.

[@necurrence1776]

It's a good design and I have just enough left over wood to build these. Don't need plastic nor welded. For me, the stopper will probably be sitting horizontally just as the rest of the planks, two small pieces on top of each other. Because my front bumper seems lower. But yes, as a mechanical engineer I congratulate this idea 👍

[@billy4227]

And the thing is destroyed the first time you nudge the back plate with the front tires.

[@johnklenzak1001]

I built my ramps out of 4 x 4 back in the 1970s to change oil and grease the car and my truck. My son bought me a metal set in the 1990s.

[@krg038]

I built 4. 1 board lower. One set front/back. Front set 1 board less. Most cars need the oil pan plug more down in the front to allow drain pan draining. Up in the front only allows for 1 quart old oil to be left. Also added L Brackets to the vertical and top board. Very stable for my big non lifted van and truck

[@jakee8704]

Used ta have ta make these ramps for our flatbed tow trucks 👍👍 Well done

[@elvismanrocks]

Very nice buddy! but these days you buy plastic ramps they last forever very lightweight way safer no steps and you can get them in special for under $50.00 so all that work it's just not worth but the idea is good.

[@ln5423]

Missing some back wheel block chocks. So the car doesn’t accidentally roll back and crush you.

[@brynjolfureinarsson6038]

That is how do it

[@chilidog73]

Those are amazing! Like the 8th wonder of the world!

[@demarrmelton6348]

I made 2 sets about 10 years ago. 2x12's. Singles for the front. Duals for the rear. I used to do commercial vechile repairs.

[@curtisgeorge1566]

An engineering marvel.

[@kreynolds1123]

Nice, but always put some chock blocks behind the rear wheels. You might not always need them but you should be in the habit, so you don't end up forgeting to use them the very time you needed them and didn't.

[@waynesmith9765]

So you invented these ramp in 2019. I've had a set just like them for over 30 years.

[@craigbratty5453]

Think your taking the word invention too far. I'm sure he knows that stands have been out for years😂😂😂😂

[@charliedee9276]

Go to a bicycle shop and get a couple boxes the bikes come in. The large panels of each side are perfect for laying on, much better than the carpet. Doesn't wrinkle, easy to slide on and when the bolt or socket falls it is much easier to find.

[@user-xs5fj3ms2l]

I made my own years ago. I think mine were better. I used 4 2x10 boards and cur a 25- 30° angle, then put another board on top. It worked fine

[@chrisgibson8882]

Avec des équerres métaliques sur les côtés et une plaque en métal au niveau de la plaque d'arrêt et cela sera plus solide.

[@Stukarakuda]

Excelente, al alcance de todos. No confío en las de plástico, es tu vida la que estará debajo. Prefiero algo sólido como la madera 👍🏻👍🏻👍🏻. Gracias!

[@sd90mac61]

That is a nice set of ramps you've created, these sobs now a days aren't low enough to start up, and they're made out of plastic, and you can't drive up on them on concrete as they'll run away from you as you drive up, that pisses me off!!!!!! Your I vention is superburb, (THE BEST)!!💯👍. THANKS for sharing this with me 😉✌️👍

[@hoffmanshaven]

Pretty slick ramps. Headed to the home Depot to see how much wood is.

[@edlewi4188]

Nice ramps but it's still always a good idea to put some stands under car while your under it.

[@charlesmaverick-im8nd]

Boa ideia! Forte, confiável, estável, simples! Muito bom! Parabéns!

[@kendalgee5808]

Make sure you leave that thing indoors. Leave it outside it will get wood rot and termite damage. I would still seal that wood. That is a soft wood pine, i guess it would work. A hardwood would be better but they are 3x the price. Unless you can find it at Home Depot in the wood clearance with the purple spray paint on it.

[@DIY.Invented]

You’re absolutely right, but if you paint it will live long

[@hussamAlhussami-f6w]

good job - عمل متقن - والأفضل كذلك وضع أستاند فلف العجلة كي لا ترجع للخلف ز. تحياتي

[@joethrailkill1475]

I built a set of these in 1960. My patent royalties were lost in the mail.

[@bobprins2324]

One 2x12x8' and a 8x8x16 cement block cut in half works much better. A piece of 2x4 for a wheel stop at the top. Lot easier to store too, and a lot less $$$$ spent !!!!

[@randyharritan7252]

Thanks for showing us how to cut an angle in slow motion

[@iowaudioreviews]

Must be a city boy. We been doin this on farms in the midwest for 100 years.

[@kllgrogto5838]

Ramps to service chickens farm boy? Tractors and pickup trucks don't need ramps.

[@iowaudioreviews]

@@kllgrogto5838 Wow a beastiality joke about farmers, classic. Farmers have cars and vans as well.

[@dannyixoye262]

@@kllgrogto5838 Question, this may cause you to be butt hurt, but were you born ignorant of did you got to a liberal arts college and take classes...

[@tOmMarzig]

For the price and the weight of the wood, I'm happy with the polymer ramps I bought 15 years ago and they still work great

[@Tim921]

The most UNAMAZING thing I have ever seen. I make a set of these when I was a teenager back in the 70s.

[@MarzNet256]

I like the big stop at the end of the ramps. You won't drive over them and possibly damage vehicle.

[@franciscopino7552]

Oh,yesss! Great stoppers, whats 900 kg for such a strong piece?

[@luisd.pacheco1074]

I THOUGHT THAT IN MY LIFE I HAD SEEN EVERYTHING, BUT LIFE GIVES YOU SURPRISES, I'M THANK YOU HAVE SEEN THIS WHILE I AM ON EARTH, (THIS IDEA IS MORE AMAZING THAN COMBINING BURGERS WITH FRENCH FRIES AND SODA)

[@the_Conor]

Доски у меня уже есть, осталось мерседес найти для моих досок.

[@vitamix2011]

Теперь еще лежак на роликах надо сделать, чтобы не корячится каждый раз, залезая под машину.

[@MrGeoffrey1998]

Just got a genius idea, my parking spot has a small incline to the side, meaning its dangerous to lift a vehicle there, i could make those ramps but with one a bit taller than the other. To basically compensate the incline. OMG thanks for making me think about this xD ill drill anchors on the ground to attach the ramps, as i own the spot. Just to make sure the car doesn't move an inch ! Noiceeee

[@udavidism]

If you are not going to use a creeper under a car then use a large piece of cardboard, you can slide easily on it. Great ramps, not amazing at all.

[@vahans1969]

Начинать видео нужно было с того момента, когда были посажены те деревья, из которых были изготовлены доски! Кстати, почему не пропитал древесину олифой или другим защитным средством?

[@sashasanich74]

Взял бы шпалу железнодорожную!Три реза бензопилой-4 подставки.Они уже и дёгтем пропитаны.Я уж больше двадцати лет такие пользую.И колёсики на фиг не нужны!

[@martybaker9765]

Or just spend 30 bucks on a set of light weight ramps.

[@charlesmcdowell3984]

@Mr Blimp and the 40 dollar pos you buy wont hold up as long as these. Lazy.

[@alexcastor7792]

Most of the ramps sold in stores are too steep - low-riding cars would scrape and damage the bottom of the front bumper. This self-made one can be made with any angle you want. Great idea!

[@DankDadReviews]

Ramps are actually cheaper then the lumber and hardware to make these.

[@barrellcooper6490]

@@alexcastor7792 I had problems with ramps and jacks not fitting under the air damn. I found low profile ramps that work. Just saying wasn't that hard to find low profile ramps.

[@kiyosenl.3889]

@@charlesmcdowell3984 as far as ive ever seen they do hold up a really long time, in fact plastic doesnt rot but wood does. The metal ones will rust i guess but it would likely take longer than it would for these to rot, so yeah. Not really worth the time to make these

[@robertwalsh5461]

This amazing new invention has been around for more than five decades. Don’t get me wrong, they are cool enough also way, WAY OVERBUILT but there is nothing new or amazing about them...

[@frikkiesmit327]

Your comment is 5months old and mine like few seconds..... and the invention 5 decades plus 🤣

[@albertmaudet]

Merci, Bon tuto ! cependant , je ne voie pas l'utilité des roulettes articulées et avec freins , je pense que des roulettes fixe feraient l'affaire pour moins cher .👍

[@mijalic1]

Genius. Thank you for your time and effort to make this video and share your knowledge with us. Greetings from Croatia.

[@richardturk7162]

I have made several sets of those over the last 50 years. He used the wrong kind of casters on there but no huge deal. Sounds like his car is about to toss a rod thru the block so he will need those ramps. I love when people make things thinking they are the first one to come up with the idea only to find out the idea is 100 years older than they are.

[@miroslavjuicebag]

I like the stepped design, I'm always a little nervous driving up my continuous incline ramps.

[@mikecape5726]

Can buy ramps at Sears cheaper then you can buy the lumber and casters.

[@arturobacang4783]

@@

[@АндрейЗаньков-с3ф]

Всё гениальное просто 🙂👍

[@Wayne--O]

He should do a 3 hour video of 15 slow motion miter cuts..

[@stace5676]

And instead of of wasting the off cut from the mitre cut you cut the mitre first and flip the plank for the next end.

[@criqdekuyper9259]

Bought a set of prefab ones for less than the cost of the wood and nails. Saved 10:51 too.

[@tatert.v.9908]

as rumor has it he is still using his Dewalt miter saw to this day!!!!!

[@johncraven6699]

2 things I would have done different. #1 built it on a bench so I could stand up. #2 jumped in my truck drove to the nearest auto part store, Wal-Mart or what ever store spent 30-40$ on a nice light weight set of ramps. Took the time I saved and had a beer.

[@wallyallyn5473]

You could center them a little better

[@sbenc]

Great idea, I need something like that, and have some timber at home for this. Thanks

[@NAls-zm4fm]

Well done, great video and right to the point. Would you please share the length of the wood for each layer?

[@leonvdm]

Come on. A little imagination and brain and you can do that yourself.

[@stace5676]

And every chance you might get them evenly spaced unlike the ones in vid.

[@JoseAlvarado-gj8rd]

You can make them if you have leftover wood, buy the wood will be Spence than buy new ramps, Anyway good job.

[@timhorton6485]

Well that was 11 minutes ill never get back.

[@angelocollins3372]

Yes me to but glad I am still here why do people come on here making something that cost more than just going buy it at store cheaper

[@miguelvalencia2528]

Well, 5 minutes for me, I watched at 2X speed.

[@angelocollins3372]

@Matter Do I am gonna see will building these Monday and see then I am always grown enough to I am wrong

[@joepublic2894]

I made mine out of a 1 foot diameter tree trunk .it was free from the forest.ALL NATURAL,and termite resistant.I cut the trunk to 6 feet long then cut it diagonally in about the middle at 45 degrees.SURPRISINGLY they don't roll.I leave them in the woods where i drain my oil,no one even knows there,there.haha

[@meno_a7571]

Am I the only one whom wanted see what the little wheels would do? 🥊🤣

[@artnalex]

6:52

[@LarryBees]

And dont forget to put handbrake on tight and chock the back wheels Also leave in gear.😀

[@DIY.Invented]

Yes 👍

[@SuperGlen100]

Nice idea, although being as my workspace is limited, I have the metal type of ramps the nestle together

[@larryschwartz9883]

I’d rather have a set of steel ramps. I would trust them more. Hobo Freight runs them on special.

[@melemel2430]

WOW! Amazing. Holy s**t! Can't believe I didn't think of this. Dude you must have also invented the wheel along side with sliced bread. HARBOR FREIGHT!!! Get with it FRED. YABA DABA DO

[@craig20088]

A little constructive criticism. If your going to spend $1,000 on a cordless compound miter saw buy a decent cordless drill. Change to fixed fixed rollers as the non fixed would drive a person crazy. Roller knee pads, really. Seems like a waste of $$$. Lastly, wear shoes.