DRIFTMOTION 1JZ VVTI BILLET TURBO UPGRADE

Link for the turbo upgrade www.driftmotio...

[@latuba2478]

4:48 😂😱👌🏽

[@subidude115]

So I’m a Subaru guy but I have a jzs171 I wondering do I need to tune it or is it good to run on stock ecu with this set up ?

[@ShawnT_1JZ]

why does no one show the j-pipe being removed with upper water neck lol

[@DeadlyKiller54]

How has it held up? I leave near driftmotion, and want to invest in a billet ct15b, but i want to make sure it’s worth it.

[@Tyler_Mayer]

One full drift season with no issues

[@finz1374]

@@Tyler_Mayer what hp did it make? Im currently installing billet ct15 ! Really wish it gets around 400hp :o. I also have aftermarket ecu (apexi power fc) and cat delete/ bigger DP & whole exhaust. Some old boost controller, GTR R35 Injectors, walbro fuel pump, :d

[@Tyler_Mayer]

@@finz1374 check out my other videos It made 400 on pump. It made 450 on e85

[@JzLyfe]

I was just looking at doing this. I found some pretty cheap Ct15 for sale with the manifold.

[@MadMattDrifts]

Yoooo what's up with that fuel filter? That's for a carbureted engine!

[@WrenchingOnWheelss]

Make sure to check the wastegate rod clip mine came off first drive took me a week to find out what was wrong with it.

[@Tyler_Mayer]

Mario Sanchez thanks for the heads up! 🤘🏻

[@bradkelly8028]

@@Tyler_Mayer your build looks good. Nice work.. I'm new to the drifting scene. I've just finished a 1jz swap in my s14.. I'm also in Snohomish and notice you ha e a buddy that tunes your car.. would he be interested in tuning mine for some cash?

[@Tyler_Mayer]

brad kelly call Drive Auto Sports in Woodinville. Tell them I sent you.

[@bradkelly8028]

@@Tyler_Mayer thank you

[@expendabledago7498]

does this kit work for non vvti 1jz’s?

[@b-radinda505]

What’s good I have a 1jz vvti swapping it into my mk3 supra this is my first build kinda just wanna get the car going. Would drift motion take my old Toyota turbo and clean it up like they did yours? Also it’s probably best I use stock turbo for now before going with a bigger turbo atleast see if car starts then go from there I guess wouldn’t you agree?

[@itzstolen9632]

Why the jpipe still on?

[@tunex_]

Subaru guy impressed how Toyota turbos don't have any oil in them 😂

[@htxlunaangel6629]

What fuel pump are you running?

[@SaulTamalezX8]

6:00

[@justaverage8345]

Have you tuned it at all or are you still on stock ecu

[@Tyler_Mayer]

im on a aem infinity 6 ecu

[@tottots61]

What size is the driftmotion compressor wheel?

[@systemfroze8537]

What about the steel bladed wheel rebuild kit? Its cheaper than the billet rebuild?

[@markkcristina7744]

How's it going with that turbo

[@dahjord]

uh yeah and yeah

[@chrisej207]

I see no update

[@Tyler_Mayer]

Turbo and fuel injector install kzbin.info/www/bejne/nme7c5mmhZqAmJI Fuel pump and AN fuel lines kzbin.info/www/bejne/r3rJiWNnprqXjJI tuning kzbin.info/www/bejne/qoqcmZx_nd-kpa8

[@Bellomotorsports]

is this v1 or v2 rebuild?

[@Tyler_Mayer]

I bought it last year. I don’t know if it was v2 or v1

[@Bellomotorsports]

@@Tyler_Mayer my questioned sucked. You have the larger exhaust wheel. Mine is just the standard one replaced with the larger intake wheel. I am going to have a similar setup, I appreciate your video and dyno results !

[@Bellomotorsports]

@@Tyler_Mayer I have another question. Did you run the stock wastegate on your turbo ? The spray painted black one is just the OEM painted right ? Did you have a boost spike issue ? Did you bore out the wastegate hole?