drill press table with a fence & 2 vices in 1 / sliding dovetail rail [woodworking]

facebook : / woodworking.jj
insta : j_woodworki...

[@berndterstegen3840]

Great work! Thanks for sharing with us. I love that all is made from wood only (except some screws of course). Also the smooth precision is just great.

[@Heseblesens]

One of the most inspirational jigs I have seen from DIY here on KZbin! When I get my worrkshop up and running I will try to make something similar. Ten thumbs up!

[@j-woodworking9573]

Thanks for watching sir.

[@juliuspereira7067]

Simple, yet elegant and it works great. Thanks for sharing. Awesome job.

[@Grassy20]

As always, really great! This gave me an idea for a project that I need to do. I need something to slide and I really like the 45 degree cuts you made to allow that piece to slide.

[@j-woodworking9573]

I hope you'll succeed in it. Thanks for watching sir.

[@samspade4634]

Just when I think you've made everything, you come along and put out another great idea. I love your gentle precision and look forward to seeing you again! Thanks for sharing.

[@j-woodworking9573]

Thanks for watching sir.

[@sadali8285]

. . .! . ! .

[@sadali8285]

........... ...Dermawan t

[@stefanobianchi1551]

Excellent!!! Thank you very much Maestro! Greeting from Geneva, Switzerland

[@wolfie3376]

absolute genius, I love it and will begin work on mine next week !! Thank you

[@j-woodworking9573]

Thanks for watching sir.

[@ruatarengsicolneyrengsi8924]

Extremely neat in every way. Wonderful. Thanks for sharing.

[@marcusviniciusdeoliveira8269]

The job was very good. Congratulations!!! A tool built with a lot of capacity and zeal. Thank Marcus 🇧🇷

[@j-woodworking9573]

Thanks for watching sir.

[@neildunbar1231]

You Sir are a pleasure to watch! Brilliant ideas and precision. Thank you

[@j-woodworking9573]

Thanks for watching sir.

[@goptools]

Hi Mr. J, That is a handy and versatile table for the drill press. I like the blocks you added underneath, which will make sure the table is always aligned on the drill press. Thank you for the video! -mike

[@j-woodworking9573]

Thanks for watching Mike.

[@kenemt3949]

I know I'm late to the party, but I'm making one of these now, and it is so cool. It's forcing me out of my comfort zone, and making me think... Thank you so much for the video.

[@joedance14]

Beautiful work, as always! A build article or pdf plan would be helpful. Thank-you for inspiring us!

[@kripacalicut8535]

You said it gentleman 👍

[@guillo2388]

You are the best. Thanks for revealing so important information.

[@sapelesteve]

Well done J! Your ideas and projects never cease to amaze! 👏👏👍👍😉😉

[@j-woodworking9573]

Thanks for your encouraging comments sir.

[@francisconascimento2034]

Fantastic, muito bom , excelente, Brasil 🇧🇷

[@JohnColgan.]

Great design & build, very flexible tool. Thank you. & Stay safe

[@j-woodworking9573]

Nice to see you as always. Please take a good care of you. Thanks.

[@ottorinopugliese7697]

Complimenti, un lavoro davvero ben fatto!

[@markushartmann8049]

Absolut Klasse Anschlag wow und in Prinzip einfach nachzubauen Sehr gut geworden 👍

[@pdstokes8]

Excellent tool. Thank you.

[@eliezervellasco3347]

trabalho maravilhoso muito bom mesmo continue com esse talento

[@robertsoncletokoerner7012]

Muito bom, parabéns e obrigado pelo ensinamento. Robertson (Brasil)

[@j-woodworking9573]

Thanks for watching sir.

[@KaisersFriemelbude]

Thanks for inspiration!

[@manuelramirezmartos3804]

Es usted un artista es un gusto observarle trabajando qué delicadeza en sus movimientos de manos y de herramienta enhorabuena amigo a mí también me gustaría algún día poder hacer las cosas como usted

[@Gus0046]

Que calidad de trabajo y de bien hecho. Te felicito excelente trabajo.

[@j-woodworking9573]

Thanks for watching sir.

[@tomowens2720]

Excellent as always! A pleasure for me to watch. 👍

[@j-woodworking9573]

Thanks for watching sir.

[@art-decodesign4850]

Magnifique 🤩…, très beau travail de qualité et précision 👍🏼 je vais me servir de vôtre expérience pour réaliser la mienne.., et un grand merci pour votre partage.., Salutations from Genève 🦍🇨🇭🥋

[@viorsa8200]

Excelente proyecto muy bien desarrollado y mejor ejecutado , como todos los que usted hace , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España)😜🤓🤣

[@j-woodworking9573]

Thanks for watching sir.

[@KipIngram]

That is quite lovely - I definitely want to make that.

[@j-woodworking9573]

Thanks for watching sir.

[@kiwistew1]

Perfection. I only hope I can make it half as good as this. Thank you.

[@j-woodworking9573]

Thanks for watching sir.

[@mikecurtin9831]

Several excellent ideas. Thanks very much and thumbs up to crush a troll.

[@kasader]

That is fantastic, and a great presentation

[@valterleao6795]

PARABÉNS...., sempre muito competente, certamente esse dispositivo ajuda e muito nos trabalhos, gosto de como o amigo é meticuloso na confecção das peças, classifico como QUALIDADE! Abraço aqui do Brasil 🇧🇷

[@j-woodworking9573]

Thanks for watching sir.

[@richarnaud7794]

GENIUS!

[@garystroupe3896]

I am amazed at your creativity sir. I have been working with wood for more than seventy years and am not easily impressed by the work of others. I also suffer from O.C.D. so, corners must be square and even, sliding parts must never hang and anything made must be able to be used by everyone. I simply love the simplicity of your creation. I can see myself making these not only for my drill press but for my router table and band saw also....keeping my old fingers away from the cutting edges of blades of any type is a preoccupation of mine. In any case, my hat is off to you sir.

[@j-woodworking9573]

Thanks for your lovely comment sir.

[@cindyharrison4191]

Wonderful, functional and beautifully made.

[@j-woodworking9573]

Thanks for watching sir.

[@MCsCreations]

Fantastic work, my friend! Really amazing! 😃 Stay safe there with your family! 🖖😊

[@j-woodworking9573]

Thanks for watching friend. And please take good care of yourself.

[@adesusanto8733]

really amazing idea💡 the thought that so far is having to buy some rail kits, just enough to use the wood completely.

[@j-woodworking9573]

Thanks for watching sir.

[@didiersentilly5560]

superbe travail , belle idée c'est cool bravo à toi. bonne semaine et bon travail.

[@j-woodworking9573]

Thanks for watching sir.

[@markhedquist9597]

Exceptional. Quite exceptional.

[@j-woodworking9573]

Thanks for watching sir.

[@breakinn403]

Very nice full control jig. Well done and nicely edited to keep the viewer interested.

[@j-woodworking9573]

Thanks for watching sir.

[@rzaceylan4435]

Çok iyisiniz eline emeğine sağlık kolaylıklar diliyorum işiniz gücünüz rast gelsin selamlar

[@LonelyDogBarking]

...great. Love it.

[@j-woodworking9573]

Thanks for watching sir.

[@keupondestroy911]

Merci beaucoup pour la vidéo c'est super

[@tukangkayutaryosidomulyo3503]

🙏pekerjaan yang menyenangkan membuat alat bantu mempermudah bekerja,,,👍❤️

[@paulstanding7267]

Hi really nice well thought out jig keep well and stay safe 😀

[@j-woodworking9573]

Thanks for watching sir. And please take a good care of yourself.

[@davioliveira3554]

Perfeito 👍👏👏👏

[@j-woodworking9573]

Thanks for watching sir.

[@Erik_The_Viking]

Beautiful job! Much better than using aluminum t-track.

[@j-woodworking9573]

Thanks for watching sir.

[@robertmadden7536]

Love your work mate

[@j-woodworking9573]

Thanks for watching mate.

[@herrj.muller3624]

Great ideas ...thanks for that.

[@j-woodworking9573]

Thanks for watching sir.

[@stormman8393]

Love it. Very very good invention

[@j-woodworking9573]

Thanks for watching sir.

[@lindaloftus8780]

Great project. Very nice work.

[@j-woodworking9573]

Thanks for watching sir.

[@davidstorton910]

It's just a shame we can't get Micky wood in Europe and I can't think of anything else hard enough that wouldn't cost a fortune (ply wouldn't work)

[@paulbergen6574]

Brilliant idea which I intend to use immediately. It appears that you've used hardwood that makes sense. I imagine a couple of potential improvements I wish to add to my version. First, I'd avoid presenting wood's side grain to the dovetail grove's overhang. I imagine that it could be better supported be running wood grain across it. In my attempt to do this, I'd build up the top section with pieces from a pallet plained flat and assembled in a glue up for three layers in exchange for the two you employ. Only my top section would be pivoted from perpendicular in order to cross the lower section with a mitre angel... 45°. This incline would slant the wood grain in order to support the weak point against the strain that can be expected from cinching down against the dovetail groove. In areas where high pressures are expected, further support can be given by aiming a sequence of screws upward from the bottom. My other alteration would use a circular sacrificial piece in the place that the drill bit is expected to erode. Even better would be to so place a smaller circle in the large circle so the sacrificial small one can be turned in place under the bit for countless opportunities to resist drill damage. The larger circle would be given a tapered edge because it can be entrapped during glue up. If done wisely, it could advance three sacrificial small circles in turn, each the same size and most easily replaceable. Thanks for your thought provoking video.

[@nelkloosterziel1607]

Super mooi !!

[@frankkamolov3815]

Как всегда прекрасная идея и работа. Спасибо за полученное удовольствие от твоего творчества. Удачи тебе во всём.

[@j-woodworking9573]

Thanks for watching sir.

[@jorgealbertorodriguezmolin2117]

Excelente. Muy bien explicado. Me podría pasar las medidas aproximadas de la base. muchas gracias.

[@ernestomorell4489]

FELICITACIONES DE São Paulo. BRASIL👍👍👏👏

[@j-woodworking9573]

Thanks for watching sir.

[@jean-claudedidierlaurent7215]

Bien, le matériel utilisé, nickel le réglage de couple de la visseuse surtout au début, tout est propre sans éclat de bois, sans parlottes inules , genre, j'me la pète, je sais tout; tout est dans les gestes , joli travail! J'aurais pas fait mieux, j'ai pas le matos!

[@davidtapia8013]

Excelente...!!!

[@j-woodworking9573]

Thanks for watching sir.

[@zaratgreen2095]

Thanks!

[@davidaubin3449]

🇺🇸👍 내가 만든 것보다 훨씬 더 나은, 나는 당신처럼 하나를 구축해야 할 것 같아요. 좋은 영상 감사합니다.

[@felipelim7201]

Good idea. Excellent work.

[@j-woodworking9573]

Thanks for watching sir.

[@kripacalicut8535]

Brilliant job❤️ Kindly add a plan as well 👍

[@m5ajr874]

Best & great idea 👍⭐⭐⭐⭐⭐

[@j-woodworking9573]

Thanks for watching sir.

[@LeosTueftelei]

Excellent ! Good idea and a nice job ! 👌 👍 👍 Greetings from Austria 🙋‍♂️ Leo

[@j-woodworking9573]

Thanks for watching sir. From Korea.

[@hupajo]

WOW - suuuuuper job 👍👍👍

[@j-woodworking9573]

Thanks for watching sir.

[@richarddebeer2247]

Brilliant 👏

[@j-woodworking9573]

Thanks for watching sir.

[@lint2023]

Very nice. I like it very much. I believe wood glue is so effective that you do not need the screws.

[@j-woodworking9573]

Thanks for watching sir. Because of lack of my experience I'm not sure yet. Thanks for watching sir.

[@petery53]

Beautiful work sir.

[@j-woodworking9573]

Thanks for watching sir.

[@dscritter614]

I c u used Metrie boards. That added visual effects 2 ur cut out pieces. Neat!

[@manolololy]

Bonito , bueno y práctico Lo hago

[@j-woodworking9573]

Thanks for watching sir.

[@SergioGonzalez-vo3wx]

Like my friend 👍👍🙏🙏

[@j-woodworking9573]

Thanks for watching friend.

[@mminorhsd]

got to make one for my shop!

[@j-woodworking9573]

Thanks for watching sir.

[@amtiensinh8416]

Nice video, good idea 👍

[@karlkarrasch8113]

Das ist Präzision perfekt

[@bahaaaldeen6744]

Great Job

[@j-woodworking9573]

Thanks for watching sir.

[@latanadeglihobby]

very good great job

[@j-woodworking9573]

Thanks for watching sir.

[@jaimerivera9949]

MAESTRO UNA BUENA NOCHE ME GUSTO EL DISEÑO ES MUY UTIL SOY AFICIONADO A LA CARPINTERIA Y ME INTERESA PARA MI MI TALADRO DE BANCO UN FAVOR ME PODRÍA HAYUDAR CON MEDIDAS Y TIPO DE MADERA QUE UTILIZA UN FUERTE ABRAZO A LA DISTANCIA DESDE QUITO ECUADOR ATT. JERV

[@harakiri881]

Cho Un Sengak Imnida!

[@stevenong6611]

Good idea beautiful

[@j-woodworking9573]

Thanks for watching sir.

[@rolandgdean]

Now THIS thing, or something similar, I NEED to make. Great job sir and yet another great video. And now you've hit 130k subscribers too! You're taking off like a rocket buddy. You've done so much hard work. You deserve it.

[@j-woodworking9573]

Thanks to your kind and strong support I could come here. Back beginning my KZbin channel I was poor at everything such as woodworking skills and knowledge, pictureing and editing. These days I'm fully satisfied with my performance. Also happy to know you far from here. Thanks a lot buddy.

[@omarmohmmed]

الله ينور عليك

[@j-woodworking9573]

Thanks for watching sir.

[@benbrubaker7896]

EPIC!

[@j-woodworking9573]

Thanks for watching sir.

[@lethoskustenwerkstatt6023]

Very nice 👍🏼

[@j-woodworking9573]

Thanks for watching sir.

[@Dadymilles13]

Super , merci je m abonne....;-)

[@adrianwilliams763]

Nice design

[@malcolmhodgson7540]

Very useful table

[@j-woodworking9573]

Thanks for watching sir.

[@thewoodlesworkshop.157]

Super!

[@j-woodworking9573]

Thanks for watching sir.

[@banditva8040]

Have a plan for this.

[@user-ld3rd5dx4j]

Отличная работа , однозначно в копилку . РСФСР / СССР Иркутск (Сибирь)

[@jimh472]

Great design. I'd like to know more about that drill bit (6:06). It looks to be drilling a starter hole as well as countersinking all at the same time. Got an affiliate link to the item?

[@j-woodworking9573]

smartstore.naver.com/toolstar/products/4598191373?n_media=11068&n_query=%EC%9D%B4%EC%A4%91%EA%B8%B0%EB%A6%AC&n_rank=15&n_ad_group=grp-a001-02-000000019936005&n_ad=nad-a001-02-000000124016279&n_campaign_type=2&n_mall_pid=4598191373&n_ad_group_type=2&NaPm=ct%3Dkpf650tk%7Cci%3D0zO0003LbVruxdZHluY1%7Ctr%3Dpla%7Chk%3D4aebb209380d2fbaeb33599983ccd3cd86cf5e1c You can see more above. Thanks for watching sir.

[@martinmccartan739]

Hi great build .The wood you used ? Looks like kitchen work top

[@j-woodworking9573]

It is rubber panel. I use it for better presentation. Plywood would be enough for general work shops. Thanks for watching sir.

[@marcosg9736]

Cool 👍

[@carlosdasilva3557]

Quem sabe ,sabe.👍👍👍👏👏👏👏👏😎

[@j-woodworking9573]

Thanks for watching sir.

[@mtjm]

Very nice work. I notice you use phillips screws with all your projects tho. Why not switch to torx head?

[@j-woodworking9573]

Thanks for your kind advice sir.

[@dleivam]

Brilliant

[@j-woodworking9573]

Thanks for watching sir.

[@edgardolopez4236]

훌륭합니다. 단 하나의 세부 사항만 누락되었습니다. 치수는 어떻게 됩니까? 고맙습니다

[@jorgealbertorodriguezmolin2117]

le pregunto desde Argentina.

[@j-woodworking9573]

Greetings from Korea. Thanks for watching sir.

[@yonghwankim7912]

아주 잘 보고 있습니다. 제작시 밑그림도 함께 보여주면 제작에 많은 도움이 될것 같습니다. 감사합니다.

[@j-woodworking9573]

설계 프로그램을 사용할 줄 몰라서ᆢ 죄송합니다.