Crawler Canyon Fab Lab #2: Get Link'd (it's custom links)

  Рет қаралды 1,875

Crawler Canyon

Crawler Canyon

Күн бұрын

Пікірлер: 28
@treadway47025
@treadway47025 Жыл бұрын
Do a video on your truck stand. Looks like a yoga block and some other pieces?
@johngookinsable
@johngookinsable Жыл бұрын
i have a mini lathe and mill and you made it look easier on a wood lathe! Good job my friend
@garyclark24
@garyclark24 Жыл бұрын
“We use the whole Buffalo” I haven’t heard that in decades!😂
@Team_ReVolt
@Team_ReVolt Жыл бұрын
Nice! I'll certainly make those brass ones. So, the links, do they count as sprung or unsprung waight 🤔 Do you have a suggestion for good rod ends? Those balls you put in there.
@CrawlerCanyon
@CrawlerCanyon Жыл бұрын
I believe they're unsprung, as they're below the shocks. My favorite rod ends are the angled Element ones, ASC42040. For hollow balls, I prefer brass over anything else, and the cheaper the better. I've bought SO many packs of Yeah Racing YEA-AXSC-010. At least half the rigs in here are using those.
@eeatsvaz
@eeatsvaz Жыл бұрын
Time to start brazing. 🧨
@BrandonMythigander
@BrandonMythigander Ай бұрын
Yessssssss.
@PHILLIPfry2010
@PHILLIPfry2010 Жыл бұрын
I use stainless tubing and all thread. 4 mil or 8/32 fits in 4 mil tubing.
@fromfin90
@fromfin90 Жыл бұрын
I have done a few links in my couple years of hobby.. i've used m4 threaded rod and then sleeved it with aluminium or copper tube. With traxxas revo rod ends. So far so good, as i live in a small 1 room apartment i limit the amount of powertools i use.
@CrawlerCanyon
@CrawlerCanyon Жыл бұрын
Definitely easier that way. I’ve also seen guys use 8-32 all-thread with brake line over the outside- still easier for us over here to get standard all-thread than metric, sadly.
@fromfin90
@fromfin90 Жыл бұрын
@@CrawlerCanyon i live in a metric country, you ofcourse use whatever is available. And the copper tube i use is made for break lines, easy enough to work
@Br0rB
@Br0rB Жыл бұрын
That's the way I do it too, for my smaller scale stuff. Have yet to make some for my 10th scale, but it's an easy and cheap way to do it. For my SCX24s I've made high clearance links that way, using m2 threaded brass rod and 4mm OD 2mm ID brass tube, and it works awesome. :)
@treadway47025
@treadway47025 Жыл бұрын
Enjoying the SE build videos
@JIPPERR_1
@JIPPERR_1 Жыл бұрын
Show us how you make some of those custom chassis rails! How do you get the holes drilled with precision? I'm toying with the idea of building a long wheel base crawler based rc. Custom chassis rails are not out of the question but not anything I've done before.
@white6502
@white6502 Жыл бұрын
Stack the rails and clamp. Measure mark and then Measure again then drill. Dont take the clamps off until your finished
@CrawlerCanyon
@CrawlerCanyon Жыл бұрын
I'm pretty sure I covered the whole fab process in one of the Vanimal videos, but I can definitely do a refresh for a Fab Lab installment. For accuracy, I just use a drill press-- and the secret sauce, which isn't so secret-- is that I clamp the plates together and drill both sides at once.
@white6502
@white6502 Жыл бұрын
@@CrawlerCanyon id be interested in seeing you do another set. Something a little more extreme. Also I bought a brat body after seeing the one you've used and its huge. Im going to have to buy a 10.3 just to fit that body on something
@JIPPERR_1
@JIPPERR_1 Жыл бұрын
@@CrawlerCanyon right on, I'll check the vanimal vids 👍
@jimpalazzolo6013
@jimpalazzolo6013 Жыл бұрын
Great channel! I have the Traxxas K10 High Trail Edition, would you ever consider spotlighting one of those on your channel videos?Thanks!!
@CrawlerCanyon
@CrawlerCanyon Жыл бұрын
Hasn’t really been on my radar as it’s definitely a trail truck more than a crawler, but if one gets near the Canyon, I’d certainly give it a run through.
@Cyberwendy
@Cyberwendy Жыл бұрын
Would like to see how you calculate Center Gravity
@CrawlerCanyon
@CrawlerCanyon Жыл бұрын
kzbin.info/www/bejne/bKfdaaGLadKrjpY
@Cyberwendy
@Cyberwendy Жыл бұрын
@@CrawlerCanyon Great, thank you
@michaellenheiser3157
@michaellenheiser3157 Жыл бұрын
Off topic but a question that has been burning inside….. Not including and Redcat product ownership where would you rate Colonel Mustard on the scale of disappointment?
@CrawlerCanyon
@CrawlerCanyon Жыл бұрын
Not as bad as you would think, actually. The "standard" 10.3 is my least favorite Axial platform, and the AR45P is my least favorite axle, so at this point we're just moving laterally. The thing is, I think the Colonel can only get better with some tuning and tire selection, so I'm still at least positive about it. Redcat on the other hand... to paraphrase those old DARE anti-drug ads from my youth, "Redcat... not even once."
@Muresanady2011
@Muresanady2011 Жыл бұрын
HY, can tell us the exact lenght of all links for this Enduro? Front upper: mm Front lower: mm Rear upper: mm Rear lower: mm THANKS
@CrawlerCanyon
@CrawlerCanyon Жыл бұрын
Before I pull out the calipers, are you looking for "shoulder to shoulder," which is the length of the exposed link not including the rod ends, or "eye to eye," which is from mounting point to mounting point?
@wowyummyyy
@wowyummyyy Жыл бұрын
L I K E 👍👍👍 👍👍 😻😻😻😻😻💯💯💯💯💯💯
Crawler Canyon Fab Lab #3: let's "make" some shocks
48:35
Crawler Canyon
Рет қаралды 2,4 М.
How-to Build Custom Links - Crawler Basics
15:01
Harley Designs
Рет қаралды 101 М.
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 35 МЛН
路飞做的坏事被拆穿了 #路飞#海贼王
00:41
路飞与唐舞桐
Рет қаралды 26 МЛН
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 155 МЛН
What's Up with my RC Crawler Today?
24:51
Boomslang Suspension Suss
Рет қаралды 7 М.
Crawler Canyon Fab Lab #8: it's suspension links (again?)
39:44
Crawler Canyon
Рет қаралды 1,2 М.
Patina Paint Tutorial on the Element Ecto body!
11:03
Cactus Crawlers RC
Рет қаралды 6 М.
Crawler Canyon Rearview: 2.2" Losi Rock Claws
45:46
Crawler Canyon
Рет қаралды 472
How to make your own custom scx24 links cheap and a update!
15:55
TJ the rc Guy
Рет қаралды 3,3 М.
Crawler Canyon Quick(re)view: Element Enduro Sport Edition (SE)
53:55
Making custom R/C crawler suspension or steering links.  It’s easy!
5:13
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 35 МЛН