Рет қаралды 2,923
Welcome to Driver D trains. Thanks for stopping by! I’m your host Driver D.
We’re joined today by our conductor and brakeman Scratchy-C.
[Meow]
In a recent series of videos I showed you how to assemble and configure a DCC-EX command station. If you haven't already seen those videos, be sure to check them out!
In one of those videos I talked about the problems I had using stranded wire with the screw terminals on my DCC-EX command station. A viewer reminded me that I should be using ferrules!
In this video short, I’ll show you how to use ferrules on your stranded wire to connect to the screw terminals on your DCC-EX command station.
Here is a link to the set of ferrules and crimping tool that I used:
www.amazon.com/dp/B09FSWKRH5
Be sure to check out these other videos in this series:
Part 1: #4.a - Assembling a DCC-EX Command Station kzbin.infoHatlU7A5S5s
Part 2: #4.b - Installing & Configuring DCC-EX kzbin.infojv_xfwLZJd8
Part 3: #4.c - Adding Wi-Fi to DCC-EX • #4.c - Adding Wi-Fi to...
Part 4: #4.d - Configuring DCC-EX Wi-Fi for Station Mode • #4.d - Configuring DCC...
Part 5: #4.e - Adding and LCD Display to DCC-EX • #4.e - Adding an LCD D...
Part 6: #4.f - Correcting the Wi-Fi Firmware for DCC-EX • #4.f - Correcting the ...
Supercut: #4.sc - Assemble a DCC-EX Command Station • #4.sc - Assemble a DCC...
All aboard!
[Meow!]
DriverDTrains ©2024