Installing a Double DIN android auto head unit in a 2000-2002 GMC Yukon / Tahoe / Silverado / Sierra

[@JasenFromBoston]

you already had a mic above your head. that little black thing sticking out of your overhead console. and the mire runs into the stereo harness your just supposed to twist em together. omg i was like no way thats gonna fit in there. good job man

[@fresh55n9ne]

This is the type of video I was looking for thank you for showing your skills and hard work. I could not have gotten the dash panel off my 2001 GMC Yukon without this video.

[@DriverJsGarage]

Glad I could help

[@davidvincent1093]

Thank you for the video . This is the exact unit (minus the back up camera since I already have one in my motor home) I am getting ready to install it tomorrow and I am going to have to rebuild the entire dash area since it is a 1997 Chevy P-30 frame with a 40 WINNEBAGO motor home on it) and it only has a single din opening. I have already installed the correct speakers in the middle of the coach and run all the wires. I did test it and could not get any sound yet but I think that is just my error and something I have mote programmed correctly yet (plus the wires are only twisted together until I am ready to do the full install) But again thank you for the video and just so you know it is March 15, 2023 so they are still playing and recommending your videos

[@DriverJsGarage]

Glad I can help folks. I know it's an easier job, but not everyone knows that and I wanted to make sure I could help folks get some confidence that they can do some of this stuff themselves and save $$. I don't know much about the P-30 frame, and box trucks/motor homes specific setups to help figure it out, but sometimes there is a factory amp, and if you don't wire the head unit into the wire that signals the amp to power up, you won't get audio. Again I don't know much about the P-30, but I hear about this and see it in other vehicles I've worked with. IF you're going for a more custom built motor home, I'd also suggest potentially designing your own full amplified audio system, if that's in your comfort level. There are a few really good car audio channels out there, that focus more on fully custom systems (where I'm more of just a DIY for projects I want). @CarAudioFabrication ( www.youtube.com/@CarAudioFabrication ) is an awesome source for info and does some really neat builds to inspire.

[@michaellucas9004]

You just saved me from a headache, you’re the best!

[@DriverJsGarage]

Great to hear!

[@kalashnikovbob355]

Looks good. Ill be doing this to my 01 silverado soon, your video was the first i could get a good look at how the bezel looks installed. Looking forward to it.

[@DriverJsGarage]

Enjoy once you are done, a nice head unit with some modern convieneces really spruces up these trucks, and they are still one of the best trucks/suv platforms out there.

[@Roscoschickenwaffles]

Just to update new people looking at this they do make GM color coded 2 din dash kits from the Metra company he has linked ! I'm new to the Yukon gang picked up a 2001 with 110k miles and she purrrs. Just ordered a DMH NEX 1770 only available on directly from pioneer $300 and will get the dash kit. Thanks for the Vid!

[@DriverJsGarage]

Correct, Metra has started selling kits that have colors that are close to factory appearance. I recommend folks specifically wanting the metra kit to check out crutchfield so they can be sure it fits their vehicle easily. If you want the metra kit you can head over to crutchfield and put in your vehicle information to get your kit. www.crutchfield.com/g_112200/Dash-Kits.html?tp=3121&fa=1#&avf=Y

[@gomile1000]

So...I just bought an 02 Yukon. Prior to the Yukon, I had a 2000 Silverado. I went through HOOPS modifying the dash from an 04 to accommodate a double din radio only to find out they made a kit, as seen in this video.... *Salt intensifies as I purchase kit* I'm also going to get the dash color code to paint the kit.

[@DriverJsGarage]

First welcome to the Yukon crew! I also bought all of the parts to make the newer dash style work too, started modifying them and found the kit after I started the work. Which is why I ended up making this video, because I felt like the effort it took to update the dash just wasn't worth the result when I could buy a kit for the same price and not mess around with fitment and fabrication I also recently found out that another brand has since started selling kits that are already color matched as well. If the color match/fit/finish are good I'll be updating the links in my videos to the newer SCOSCHE kit too. I'll probably likely do a review video of the ir kit also, because so far the kit looks like it's better than the original metra kit I used.

[@gomile1000]

@@DriverJsGarage Definitely shall be watching for that.

[@MarZhaUp]

So I have a 02 Tahoe but I don’t have that red or pink factory amp wire! So how would I find which wire the factory amp is!!!! Please help

[@DriverJsGarage]

I'd like to say I'd be surprised if you had a factory amp and didn't have a pink wire, but I know sometimes corners get cut, repairs get made etc. I searched a bit to see if the Tahoe varied from the Yukon in any paper work I could find and everything I found seemed to be the same for GMT800's. The Amp power wire should be pink. IF the head unit works already you don't need to worry about it because you likely don't have an amp. My experience with GMT800s if you don't have the amp wire connected you get no sound at all. Where I've had other cars, that still had audio, but the volume was just lower. The amp wire for me, wasn't part of the main harness. It was a smaller plug in that was if I recall 4 wires on a separate connector I had to splice.

[@ssdeuce]

Still rocking the tape deck! Love it!

[@DriverJsGarage]

It's disconnected, but I see no reason to pull it out. I've actually been tempted to to see if I can use it as an Aux source as a throw back gag. The guy I got the truck from said he got it with that tape in the deck too, so I figured what the heck I'll leave it til I get rid of the rig too.

[@unknwnsmusic9714]

@@DriverJsGarage any updates for the reverse cam by the way love your vid. ✌

[@DriverJsGarage]

I appreciate it, no unfortunately I haven't had time to get the backup camera installed. Since the Pandemic I've not had anywhere near the amount of time I would like to get all of my projects done. Just flat out too much to do between working, and playing teacher for my kids.

[@justinledesma-redeagle3562]

@@DriverJsGarage You can upgrade the tape player and the onstar to cubby holders. I did it, makes it look more modern and another place to toss the cell phone lol. I’m sure I’ll find it… but why don’t you recommend changing the 99-02 with 03-06 dash kits? I changed my truck to a double din, now I don’t like my single din in the Yukon anymore. I know I’m “supposed” to change it but if I can get away without it why not Onstar: www.ebay.com/itm/99-06-Chevy-Tahoe-Silverado-Sierra-Yukon-Suburban-Dash-Storage-Cubby-Bin-U58-/203278522627?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0 Tape deck: Radio Stereo CD Replacement Pocket Kit Fits Chevrolet Chevy www.amazon.com/dp/B00DDYNUC0/ref=cm_sw_r_cp_api_glt_fabc_0RB58ANPZ6839P6ABWEF?_encoding=UTF8&psc=1

[@DriverJsGarage]

Thanks for the links somehow this comment got lost in my replies. I'll check both of those out, because while the tape player is a silly novelty reminder of when the truck was made, I'd rather have more functionality since this is a rig I use mainly for hauling or jobs.

[@whyfly12]

Nice. Looks good. That's the model I'm thinking for my mustang.

[@DriverJsGarage]

It sounds good so far. The only issue I've run into is with getting the wireless connection to work with my s8+

[@whyfly12]

@@DriverJsGarage are you upgraded to Android 9 on your phone?

[@DriverJsGarage]

Nope currently running 8.0 I believe. Not sure if I can force 9 yet or not. I've been considering an S10+ though

[@DriverJsGarage]

So I finally upgraded to Android 9 and it still won't seem to acknowledge the wireless connection. I'm going to do a bit more digging and see what I can figure out. Follow-up video coming down the line.

[@DriverJsGarage]

Late last fall I figured out how to do the wireless connection and forgot that I wanted to address it in a video. So I'll talk about that in another video probably next week.

[@MattHarris89]

I couldn't find the link for your reasoning on the swap. Your descriptions says Check out why I don't think it's worth swapping a factory 03-06 dash into a 99-02 Yukon/Tahoe/Silverado/Sierra but there is no link.

[@DriverJsGarage]

looks like I accidentally set it to private. Video should be up again.

[@Mistafivetwoeleven]

13:59 is the a different facia? It looks different color wondering if there was a reason for change like the other one broke or had to change because of radio?

[@DriverJsGarage]

For the Double din there are a few ways you can do it, you can modify the stock bezel (but then it won't look exactly right if you go back to stock, so I went the route of getting a double DIN specific bezel / facia. The first one I got was black, when I was initially shopping around for the head unit I could only find black in stock, and wasn't sure how long the wait would be to get the right color, so I just pulled the trigger. ~1 year later my truck was broken into and the bezel in the video destroyed so I've since replaced it with one that very closely matches the factory color (I believe I updated the link in the description of the video to the newer one that has options for matching the stock colors).

[@d3bilitat3d57]

where can I find those mounting brackets

[@d3bilitat3d57]

found my answer in old reply thank you and great video

[@DriverJsGarage]

Thanks for the kind words, and yeah the brackets came in the install kit.

[@tommydonaldson6345]

Where did you get the right mounting bracket for the radio? I'm banging my head off the wall trying to make something that fits.

[@DriverJsGarage]

Everything needed was in the dash kit I bought.

[@diego80five]

Wait so bro do you know by any chance if a stock 01 Chevy Tahoe is a single or double din???

[@DriverJsGarage]

The stock size is DIN and a half / 1.5 But a Double DIN head unit can be fitted using a kit or fabricating your own parts.

[@frankjones835]

I've got everything hooked up good, but my rear door speakers aren't putting out sound...rear seat audio panel?...I've got front speakers, sub...just no rear doors

[@DriverJsGarage]

Apologies I don't check comments daily. If you've already solved the issue what did you find? If you haven't solved it yet. Did the rear's work before you put your new head unit in? If they did, then I'd start with the Head Units settings ( speaker fade specifically), if that's not it I would look at the wiring on the head unit side, make sure the rear speaker output wires match the right pin on your adapter to the body side harness.

[@frankjones835]

I didn't install the head unit(done before I purchased)...but it looks very professional. I checked all the wires and pin out, it all looks good. Just nothing to the rear passenger doors. When I fade it to the rear, all sound comes from the sub

[@DriverJsGarage]

That makes it tougher, so I'm guessing you don't know if the rears ever worked. The best place to start is continuity testing from the body side harness near the head unit to the speakers. If the wiring is good test the speakers themselves. (I did this in the past using a modified harness adapter with longer wires and just used a known working speaker connection).

[@bubbalo3388]

I assume you can't use your cassette player anymore right?

[@DriverJsGarage]

Correct. I didn't bother looking to see if anyone makes some type of adapter to make it work with an aftermarket, because I think I only own a handful of cassettes still.

[@jeremytrinkler08]

Did you have get the onstar bypass or just the regular $10 radio harness?

[@DriverJsGarage]

The wiring harness I got was a very basic wiring harness. None of the on-star features are retained and I didn't have steering wheel controls in my truck.

[@mickeyguire1]

could you add a video showing where each wire goes? i got the speakers but the others i need help please

[@DriverJsGarage]

I can see what my original footage has and try to make something from that. But if I don't have it in the original footage, re-doing the wiring step by step probably won't be possible. Typically the wiring harness adapter will have a key/legend to what each color wire on the adapter is for, and the manual for your head unit should have the same type of key / legend for the wiring coming off of the head unit, so you can match the two up and go from there.

[@alocamaro]

No triming so the double din could fit inside??

[@DriverJsGarage]

Not if you use the Scosche or Metra dash kits. (not of the dash bezel any way. The one thing depending on head unit, you may have to remove the rear brace or cut it to allow rear room if you buy a deep double din.

[@Gbody_Plus]

I got everything connected and there’s no sound on my 2001 chevy tahoe Lt

[@DriverJsGarage]

IF your speakers worked with the stock head unit, you probably have a factory amp on your truck and the Amp wire is on a harness on that is removed when pulling out the factory head unit, but that does not get integrated on the new wiring harness and has to be powered another way. This isn't something required on all GMT 800's as not all of them have the factory Amp. It's a small connector maybe 4 wires, and I believe it's the red wire on the connection (been a while since I did one that had the amp). An easy solution is just to tap your remote turn on lead onto that wire so the amp get's powered on.

[@frontyrchobby4909]

My stereo has no sound when I am driving, only works in „P“ ?! Do you have any idea what’s going on there?

[@DriverJsGarage]

If you did the wiring yourself it may be easier to trouble shoot, if didn't and had a shop do the install take it back to them and have them troubleshoot. There are tons of things it could be. My initial thought though was did the amp turn on lead somehow get connected to a wire that only gets power while in park or neutral, and the amp is turning off so you don't get enough juice to get sound.

[@frontyrchobby4909]

@ thanks for your fast answer :) I found out what the problem was: nowhere in the manual was said, that the blue/white amp wire needs to be connected to the blue antenna wire that comes out of the head unit. Now everything works perfectly and I am just glad about it ;)

[@frontyrchobby4909]

So your initial thought was just right on point! Thank you for your help 🫶🏻 with the best wishes from Germany 🇩🇪

[@rosaliom6]

What’s the back of the aftermarket stereo called the silver dash unit because I don’t want to cut the metal that supports it and I heard I would need to find a stereo that is short from the back but I don’t know what is the back of the stereo called?

[@DriverJsGarage]

I'm not sure why you wouldn't just cut the bracket, as I've not heard of any major issues from doing so, and it's not integral the vehicles safety. So besides keeping it as close to OEM as possible I can't think of any reason I'd say not to just cut it. But. If you don't want to cut the bracket and still want a double din, one of the easy solutions is to buy a head unit that doesn't have a CD/DVD drive built in, and only functions as an android auto/car play unit and a digital media player. You'll still be able to play music using digital services, memory sticks, etc. with the right unit, you'll just not have the ability to play CD's. From there, the options get more complicated. Measure down to the MM and look for a unit just short enough to clear without cutting. Build/Fabricate custom brackets and a custom facia to make the head unit sit slightly forward

[@NT3042]

Did you have to modify the climate controls at all? or anything behind the head unit? If im understanding this correctly, it was pretty much plug and play and the double din bolted right up and the only thing you changed was the bezel?

[@DriverJsGarage]

You have to cut the rear brace too it just happened that it was already cut on my truck

[@jacobsaraullo6621]

great video! i have a question. you said to cut that metal brace becuase of how long the unit is. I purchased a unit that has a lenght of 3 1/2 inches and 3.98 iches high. how long was your pioneer i know its a long time ago. But im just wondering if i have to cut i looked behinf the radio and it seems like that would fit but just seeing.

[@DriverJsGarage]

Best I could find on google was 7" wide, 3 7/8" tall and and 6 1/2" deep (which feels close to accurate). I would say test fit it before cutting the bracket see how it sits. Be gentle and go slow as you see how stuff fits. If you run into gaps after putting on the bezel then you'll need to cut that rear support brace. Likely only at the top to allow it to displace a little for you.

[@Daniel_Anishchenko]

This should work on a 02 subruban as well right? Same GMT-800 Platform and aml I believe.

[@DriverJsGarage]

Yeah the 2002 should be the same.

[@antoniop5889]

What’s the link to the new stereo brackets??? I bought a 02 escalade and can’t figure out wich one I need

[@DriverJsGarage]

You'll want to order the dash kit, that has the brackets included. amzn.to/41HKVpE (make sure to pick the color that is closest to your dash)

[@antoniop5889]

@@DriverJsGarage Thanks but that link is only for the dash bezel. I was going to replace it with a 03 and up Escalade bezel. I need the link to the stereo brackets

[@DriverJsGarage]

The scosche kit that I linked includes the brackets as well. I originally went about trying it with the 03 bezel, but I used the 03 Bucket/cage for the radio too and decided it wasn't worth my effort. I can check and see if the bezel fits at some point as I'm 99% sure I still have the 03 bezel I bought for that idea

[@alfonso1827]

Me puedes ayudar tengo una Tahoe Z71 Chevrolet 2002 toda la conexión están bien bocinas y la electricidad pero no hay sonido

[@DriverJsGarage]

The most likely cause of no sound from an after market head unit that was just installed is the truck has a factory amplifier, and the power wire wasn't connected to the new harness. The amp wire is on a secondary smaller harness that is connected to the factory radio. I'm working from memory here, but I believe it was a red wire on the smaller harness. This wire needs to connect to a switched 12v source (one that turns off when the truck is off). Most commonly I see it added / spliced into the remote turn on lead wire from the head unit side of the harness.

[@_flexxx_]

Questions…. Did your truck have the Bose system originally? Is that aftermarket bezel specific for that truck? I’m having an issue with mine not having the same amount of curve as my original… and that “amp” wire…. Was that the pink wire? Because you said red….

[@DriverJsGarage]

Let me preface this by saying it's been about 4 years since I did the install so remember every detail isn't going to happen. 1. I believe so, but... my door cards did not have Bose logos on the speakers that I remember (been over a year since I've driven the truck too, and it's not anywhere near me to go verify). But because it had on-star I believe it had to have Bose in it, because I couldn't find anything showing on-star trucks that were not also equipped with Bose units. 2. Yes it's an after market bezel. In the video I had a Metra Double Din Head dash bezel, (the link for that is still in the video description). After my truck was broken into and my head unit stolen , and dash ripped up, I replaced it with another after market bezel that had options for different colors, and listed a color that more closely matched the factory look (and it was close enough in color match that I was ok with it). It's not a perfect look, but it's better than the Metra IMO. The newer kit I have in it is from Scosche, I got it on Amazon here: amzn.to/3wlp0qV 3. On the amp wiring color, I'm fairly certain the wire was red, and that the more pink look it has in the video is because of the harsh white light, and how deep of a red the new wire I was using to connect in was, combine that with the fact that I had to peel off a lot of gooey tape from the wire where the previous owner had done a half assed job of splicing it in (no solder or connector just cut some of the cover off the wire, and wrapped the wire on and taped over it) of the wire and it looks discolored. But I'm like 99% that it was red. I hope that helps, but again it was 4 years ago I did the install, and haven't done another Yukon since, so I might be hazy on the details. TLDR; 1. I think it had bose based on other options but not sure 2. Yes after market bezel, shape was fine on both that I used., scosche > Metra 3. Pretty sure the wire was red, but only showed on camera due to color contrast between the new red wire I was using to jump to the amp wire.

[@henrygarcia4659]

What dash kit did you use? Part number

[@DriverJsGarage]

amzn.to/2W5CySU Metra DP-3002B

[@rdeadri]

Would this process be the same with the original radio still intact? I have a 2002 GMC Yukon XL and I’m looking to figure out how to replace the radio myself. Not much of a car person but I’m for sure willing to learn to upgrade some specs and how to maintain the truck myself!

[@DriverJsGarage]

Yup, same steps, just a different looking radio you're removing.

[@DriverJsGarage]

Also I'll be doing some other Yukon / GMT 800 focused videos in the near future as well.

[@farrellwatson1428]

Does the radio that you’re installing come with a CD player option?

[@DriverJsGarage]

It does! It was a big reason I chose it. It has a memory card slot, CD Player and android auto functionality. The new version of this model is the Pioneer 4500 NEX brand new: ( amzn.to/3vOKslx ) refurbished: amzn.to/3zMAZ1s and has the same features, but the one I installed was a Pioneer 4400NEX refurbished amzn.to/3qhXRBu

[@georgemartinezCH14]

You happen to know the name for the radio brackets or a link where I can buy them can’t find them anywhere

[@DriverJsGarage]

The one's I got came with my Dash kit and works for 2000-2001's - amzn.to/3ZkI6vn If you just want brackets and to try and modify your stock dash surround, you can try these brackets (they look right based on the pictures and the years listed - amzn.to/3qZGWse 2003 - 2006 you'll want something like this - amzn.to/3Po4vnU

[@georgemartinezCH14]

@@DriverJsGarage thank you this helps out a lot couldn’t have done it without your help thank you again and have a great day!

[@DriverJsGarage]

You're Welcome, glad I could help.

[@jmoreno2228]

Did you already have a double din dash kit installed already?

[@DriverJsGarage]

No, when I got the truck it had the stock dash surround, and a single DIN radio installed (using some brand of spacer kit). You can see it at 03:12 A previous owner (I'm at least the 3rd owner) had already cut the support bracket. I'm guessing the single DIN unit that was in required some extra depth.

[@daver8895]

Hey man I’m trying to do this on my 2000 Chevy express van. It’s still Kickin after 216K miles and the radio just died. Did you have to trim any of the finish panel because I have the double din radio as well and the trim panel is not wide enough. About quarter inch on the top and bottom too big. I need help on that?

[@DriverJsGarage]

I did not have to trim any of the bezel/trim around my head unit. I used an aftermarket kit first Metra (which was subsequently damaged when my truck was broken into, then switched to a scosche bezel after I got done dealing with insurance. Having never first hand taken apart an express dash, and not having seen one in person for a long time I did a quick google search and the pictures I'm finding don't look like it's the same type of dash. In all likely hood you probably could make it fit by trimming the bezel, but then you lose the option to return to stock without buying a new part. You could look for other radio options that offer a touch screen and modern connectivity, but the ones I saw on a quick search don't appear to be capable of taking CD's and only allow digital play back. TL;DR : Since I don't think the dashes are the same I can't give you a 100% answer more than I didn't trim mine I used an aftermarket kit.

[@aidanferrari1900]

how did you make the harness for the speakers to plug in the back of the deck?

[@DriverJsGarage]

The radio side part of the harness is 2 parts. The part that connects to the head unit itself was provided by the manufacturer of the head unit, and came in the original package. The second part that needed to be wired onto to this, to connect to the trucks harness. Is linked in the description of the video, (I believe in this specific instance the provider was Scosche).

[@johnwathen5468]

Where do you get the install brackets

[@DriverJsGarage]

amzn.to/3Ohq47S - they're included with the double din kit from Scoche

[@mariosanchez8962]

Hello there.. I hope your still on this platform.. I installed a double din JVC in my 2004 tahoe.. My door chime sound is super loud.. Any helpful tips.. Thank you very much..

[@DriverJsGarage]

I am definitely still here on KZbin, just been too busy to make any new videos for a while. I'm not sure how you would fix this with an after market head unit. I did a quick google search using ' how to change door chime volume in gmt800 with aftermarket radio ' and came up with some results, but don't have the time to do the research myself today. I hope that gives you a lead. Otherwise... I believe with a stock head you push the #6 radio preset and it adjusts it in some of the other trucks that share the same platform. So if you still have the stock unit you reinstall it and change it, then put the JVC back in and see if that works, but no promises on that one either as I never ran into the same problem.

[@kennyweaver3597]

Did you ha e to cut the bracket in the back

[@DriverJsGarage]

Yes. The rear bracket did need to be cut. You don't need to fully remove it though. You can just cut the top of it.

[@relaxedway5]

What would a reasonable cost be to get this done at a shop, 1k? Thanks

[@DriverJsGarage]

On this generation of Yukon/Sierra/Silverado/Tahoe the largest part of the expense will likely be the head unit, install kit, and dash surround, and depending on the head unit you choose $1k might just cover parts and install gear. (I chose a middle of the road head unit so if I recall parts and such ran me ~700 including my backup camera) but there were definitely head units that ran up to ~ $1k alone. It's also going to depend a lot on the shops in your area. If there is a BestBuy and you 'just want it done' $80-150ish for the install itself. (depends on if it's a touch screen or simple old school head unit). At custom shop you're definitely looking at more as they are going to go the extra mile on the install, and may bill by the hour instead of the job. It all depends on the complexity / quality of the install you want. Around $1k for what you saw in this video is probably what you're fairly realistic if you're going the BestBuy/big box electronics store installer route.

[@relaxedway5]

@@DriverJsGarage Thanks, I had no idea best buy offered it. They look like my most trustworthy option at this point, great quick reply ty!

[@DriverJsGarage]

I don't think ALL locations offer it, but definitely available at at least at a few of my local locations still.

[@llxbubbaxll1]

can you add a different steering wheel to this unit with buttons was wondering cause thats what im after and ill it work with the rite adapters wiring harnesses

[@DriverJsGarage]

It sounds like you're asking if you can swap a steering wheel into the truck, but I'll address a few points to make sure I'm doing my best to answer. I don't imagine swapping the steering wheel itself would be an easy swap, I don't think steering wheel controls were an option until later years of this body style (03+ I know has them in at least the Denali trim). However much like swapping climate controls I would imagine it's a lot more involved than just buying the steering wheel. I would imagine wiring or a harness transplant would be needed as I doubt the wiring for controls exists in pre steering wheel control trucks (if you have the same year, and your truck was not optioned with steering wheel controls, then the swap could be more direct, as the wiring may already be run in the truck). There are aftermarket controls that including steering wheel mounts you can find some options on Amazon here: amzn.to/3q7k3xc They also make wiring harness adapters for cars that have steering wheel controls to be able to have the controls work with after market radios. You would need to check your specific fitment before buying one of these: amzn.to/36XRATj

[@llxbubbaxll1]

@@DriverJsGarage thanks

[@louisaldrich6335]

great video .Where can i see the back up camera video install?

[@DriverJsGarage]

Coming soon. I still have the Camera and hardware for it sitting in the glove box of the truck. I think I'll get to doing that one later this week.

[@mikezaloudek4893]

DriverJ's Garage would like to see the install as well

[@DriverJsGarage]

Sorry I haven't done the install yet. With the lock downs across the US (and world), I've had a lot less time to shoot videos since I have 2 young kids that are no longer in day care and doing their school work at home. I'm hoping in the next week or so I'll actually have time to get it knocked out..

[@DriverJsGarage]

and unfortunately things haven't really let up on me, so filming time has been non existent. (Install alone probably wouldn't take me too long, but filming doubles or triples how long it takes a job to get done.)

[@jrodpadilla22]

Did you have to cut out the lower plastic shelf and the rear metal support brace. Other videos show that you have to cut that portion out?

[@DriverJsGarage]

I didn't have to cut the plastic shelf on mine. A longer head unit or a newer (03+) truck may require that to be cut. but with the head unit and model year this install was done in, that was not required. The metal support brace did need to be cut at the top to allow for some additional clearance though (but was already done prior) as another aftermarket head unit was in the truck before.

[@whuttontarnation2484]

Where does the factory radio basket need to be cut for this to work. I'm trying to do this as budget as possible and this seems like the best way. Thank you for the video.

[@DriverJsGarage]

The only cut that needs to be made if you're using the install kit, is on the rear metal bracket, at towards the top where it connects to the underside of the dash (not every head unit will require this either, as more shallow units can be installed without the extra cut to clearance the support bar).

[@whuttontarnation2484]

@@DriverJsGarage thanks, you the man bro

[@heatherkeene6360]

Do you have to special order the dash face piece? Because my top hole is the same size as the bottom one.

[@DriverJsGarage]

Yes, you need to order one of the dash kits that expands the head unit opening to double din size. I prefer the Scosche kit, as it looks enough like the factor kit that I can't tell a real big difference. I switched to the Scosche kit after initially ordering the Metra dash kit. This is the installation kit I now have in my truck. It even comes with the wiring harness, mounting hardware and antenna adapter. amzn.to/3zcHFpg

[@kewkew2]

You dont have a Gap under your ac controls? Mine has a small gap there

[@DriverJsGarage]

The only gap that I noticed is between the ash tray and charging port doors and the bezel, but I'm not 100% sure on what the gap looked like prior without looking at old photos.

[@BroncosOC]

Can I get a link for the bracket!!!!

[@BroncosOC]

The one that holds the radio

[@DriverJsGarage]

I've seen several kits say they work for the early GMT800 trucks, but the pictures do not look the same as the kit I got. The first kit I used and installed during the video is this one (At the time they only offered black... now they offer colors too Metra Double Din kit (Black) : amzn.to/3Vuzq5I Metra Double Din Kit (Shale, this is the color of my interior): amzn.to/4a1GtXW Later after my truck was broken into and my head unit stolen, I switched to a different brand as they offered color matched ones. I liked this kit better, because the texture even is a closer match to factory... amzn.to/43sR63j

[@juanrobles8017]

Could u tell me what mounting holes u used on the bracket? I just changed mine up cuz it was too low and now it’s too high. I couldn’t figure out which ones was in between. I noticed the radio has letters in the holes but I don’t know how to reference them. Thanks

[@DriverJsGarage]

It was over a year ago so I can't remember. When I FINALLY get around to installing the backup camera next week I'd be glad to take a look at let you know. Feel free to join my discord I'm on there much more than I check older videos for comments !

[@upnorthlivin814]

Do u actually need to take the heat controls out? And did u have to cut anything in the dash?

[@DriverJsGarage]

In this case I didn't have to take out the heating controls, it just made accessibility and filming a bit easier. I didn't have to cut anything when I did my installation. (If I recall correctly the rear support was already cut in my truck (sorry 2 years ago is a long time to remember)) Not all head unit's will even require cutting the rear brace. If you do it's typically only the upper part of the rear brace that needs to be cut free to gain some additional clearance. Pretty easy with a small saw .

[@dvcsub]

Why is it that on some 99-2002 some people have to cut out(trim) the metal bracket and some plastic behind the stock HU so that the new HU fits. You didn’t have to do that. Why? Thanks.

[@DriverJsGarage]

I did 2 installs in the same week and I actually can't remember if I cut the dash support or not. I know I did in the Camaro I did an install in, but for the life of me I can't remember if I did on the Yukon. However I would guess if others haven't had to cut it, it's because the depth of the head unit doesn't require that to be done. Some Head Units are more shallow and don't require the bracket to be cut, while others are deeper and will require the cut.

[@PURESOUND4]

I put a Kenwood in mine and had to cut the plastic bucket and metal bar behind it.

[@dvcsub]

PURESOUND4 what tool did you use for the metal? Do you remove the bucket and do it outside by drilling out the rivets?

[@PURESOUND4]

@@dvcsub It was 2 years ago, so I'm a little fuzzy on the details, but I did take the bucket out and used a dremel to open up the back of it...a lot! I think I also used the dremel with a metal cutting wheel on it for the steel brace.

[@dvcsub]

PURESOUND4 thanks man! I got to do this on Tuesday for a friend

[@ProfessorWaifu]

I looked up my 02 Yukon and it says DIN and Half, not double

[@DriverJsGarage]

Correct the stock head unit is a 1.5 and so is the factory dash opening for the head unit... However this is how to install a double din head unit into the truck.

[@alvaro5497]

What’s the other harness you disconnect and tucked away? Is that one important?

[@DriverJsGarage]

The only things I unplugged from the head unit were the Antenna and the harness. If you are talking about the black/red harness that was sitting loose in the video, that is the Aux cable that goes to the tape deck that came stock in this truck. Typically these and stock CD changers don't work with after market head unit's. In this case it was already disconnected, and I was just moving it out of the way. The other harness' I disconnect after that were for the HVAC controller and just plug back into the matching spots.

[@francescodimaria4545]

Hi good job! Where i can buy the slide for 2 din? Thanks

[@DriverJsGarage]

Everything needed for the installation of the double DIN setup should be linked below.

[@chayotito1044]

Where did you end up placing the antenna which came with the radio?

[@DriverJsGarage]

I did a pretty lazy ghetto install on it, since I don't even believe it's necessary (never got back to testing the theory that I could run without it connected or see what the difference was with/without it since I use my phone/Waze via android auto for GPS/Maps. I ran the wire down under the steering shaft in the dash and routed it up to the drivers side A pillar, and just gently tucked it under the headliner (it's loose pinned between the headliner and the ceiling. I found a spot that it doesn't bulge or interfere or fall out). It's right next to my mic mounting spot (which I realized I didn't cover either).Which is clipped into the drivers side headliner right next to the A pillar with the mic aimed at the drivers seat.

[@jacobparson1114]

Hey this is late but is the radio compatible for 2000 chevy s10

[@DriverJsGarage]

The specific head unit I installed in the Yukon WILL NOT fit an S10 according to every fitment guide I've looked at, but you can do a double Din in the S10, the factory dash on the 2nd Generation S10 is a 1.5, but they make a kit (relatively inexpensive too) to make it a double din. The unit with the most features similar to the head unit in the Yukon is the Alpine INE-W970HD linked here: amzn.to/3mmE2X4 (the package even appears to include the back up camera) Here is a link to the S10 specific double din kit from Metra: amzn.to/3o8D8Os

[@jacobparson1114]

@@DriverJsGarage alright thank you!

[@DaWiTtLeR]

So do you actually have to replace the whole entire bezel or does the stock bezel work with the aftermarket stereo

[@DriverJsGarage]

For a Double DIN aftermarket unit in a 1999-2002 you have to either replace or heavily modify the stock bezel. The modifications aren't reversible in the instance you want to return to to stock when you sell, so buying the bezel is the best way for a double din. For a single DIN you do not need to replace the bezel, just get an installation kit that modifies the shape of the stock opening to single DIN (and this is easily reversible, but unless you get a model with a fold out screen you aren't able to have a touch screen and nav without further modifications.

[@teeb174]

how much did just the instalation portion cost

[@DriverJsGarage]

The dash kit was ~ $120 when I purchased it (could have gone up or down since I did my install almost 2 years ago). The Wiring harness ran $10 I think. The links in the description should go to the kit and show the current prices as well.

[@pedroalbertoperaltalopez1054]

where can i buy that front in mexico

[@DriverJsGarage]

This link should take you to Amazon Mexico, and the correct item: amzn.to/3yUcMFj

[@wadedempsey3591]

2001 Yukon is a 1.5 DIN what did you use to covert to Double DIN

[@DriverJsGarage]

The links for all of the conversion parts are in the description. There is an aftermarket dash kit that makes it a double.

[@extendomigs]

So that head unit in the video supports wireless Apple CarPlay? If so, can you send me the link?

[@DriverJsGarage]

Pioneer lists it as CarPlay and Android Auto compatible with both wired and wireless connections. I use android auto on a wireless connection The Unit installed in the Video is the Pioneer Pioneer AVH-W4400NEX (Which is now an older model) but if you wanted it you can still get the older model here: amzn.to/36SZOuu The replacement / new model of this head unit which is also android auto/apple car play compatible is the Pioneer Pioneer AVH-W4500NEX : and you can snag it on Amazon here: amzn.to/2MmZRWb

[@Rosbergen80]

Does it fit for chevrolet beretta?

[@DriverJsGarage]

There are a lot of fitment guides out there. I typically use Crutchfield but there are other websites that have a good fitment guide.

[@Rosbergen80]

@@DriverJsGarage thanks man you still react after all these years ,respect

[@DriverJsGarage]

I try to as I have time, I like to try and be as active in helping as I can.

[@christian_elt.t350]

How did you make the double din fit?

[@DriverJsGarage]

The dash kit I linked in the description should have everything you need to make it fit. It includes a full dash bezel sized for a double din instead of the 1.5? DIN opening that is standard.

[@christian_elt.t350]

How did you remove the 2 ribbits?

[@DriverJsGarage]

I used a dremel tool, but if I had a different drill bit I could have just drilled them out too.

[@maxjulien8394]

Is tht a 7 inch screen?

[@ArnoldGaming]

Yep

[@DriverJsGarage]

Sure is!

[@dannmann17]

This sucks my video won't play and I've got full LTE IDK

[@DriverJsGarage]

Reduce the video quality in the settings drop down.

[@leonardmayberry4485]

Hey, did you have to change the factory 99-02 radio basket or does the kit get you around doing so? I've watched a couple other videos where guys have to cut the brace bar in the back, trim the ears off the A/C controls, trim a little of the mount, and change out the radio basket to an 03 model.

[@DriverJsGarage]

This kit gets around doing the basket swap. The only cut needed is the rear brace behind the bead unit.

[@johnstarchamp8088]

Did you connect the parking brake switch wire and reverse switch wire for DVD and back-up camera functionality? I'm doing a very similar install in a 2002 SIlverado and I'm having difficulty finding the right parking brake wire to enable DVD playback.

[@DriverJsGarage]

I actually used one of the parking brake bypass circuits. it ran a big extra (I think $15?) for the chip that you wire in, but then I don't have to set the parking brake to get to those menus or splice into the wire on the factory harness. When I eventually do the back up camera I will have to use the reverse wire though if I want it to be automatic.

[@julioborges871]

Would you look at that 😂😂

[@DriverJsGarage]

That is the idea of video, to look at that :D

[@joerivas9847]

One of the FEW videos where I donty see people DESTROY the brace in the back. Find a unit that will work with minimal destruction.

[@DriverJsGarage]

I may not have simply because it already was. The previous owner of my truck did a pretty hack job of installing the head unit they had installed, and I can't remember if it was hacked up or not because it was so long ago now. But you make a good point, installing a lot of oversized after market head units requires either fully removing, or modifying the rear brace. There are some modern units that have slimmed down by giving up the disc player though.

[@jamesflanagan-dm1kv]

I have Sirius radio

[@DriverJsGarage]

I had Sirius for almost a year and the only thing I found myself regularly listening to was sports on it, I use a memory card with my entire music collection, or my phone with amazon music on it more. I definitely get why some people just go with XM and are happy with that though.

[@ironhorse3497]

Those blue push connectors are the worst crappiest invention ever. They suck. I would strongly recommend using proper butt connectors.

[@DriverJsGarage]

There are definitely worse connectors than the blue push downs, but they definitely aren't the best. There are definitely ways to improve the install.

[@dutch971]

Step one: we’ll go ahead and... Step two: we’ll go ahead and... Step three: we’ll go ahead and... Son of a bitch!

[@DriverJsGarage]

😂

[@P47RICKG]

Love your vid, huge help! I am in need of some help with close to what you installed here. I have an 00 Suburban, with stock radio; not the same as you'rs but this one: imgshare.io/image/din.srTA8 So, obviously I want to upgrade, been looking around and I'm thinking of buying the Atoto A6Pro. However, my OEM player has two connectors back, show'n in these pictures: imgshare.io/image/srHpe - imgshare.io/image/srcuw. I am in need of help of what harness I need, and what mounting bracket do I need to buy to fit whatever. Not many with Suburbans making these videoes. I would really apprecuate the help if you could lend me your time :)

[@DriverJsGarage]

Patrick, I did some research and found the dash you kit you most likely will need would be the SCOSCHE GM5602DDSHB and Amazon offers them in multiple colors here: amzn.to/30G3kDU . (Shale is the most likely color based on that pic, but you can decide which of the colors you want based on that link). If I'm not mistaken the extra connector you have looks like a GMC Slave/Aux Input plug. Usually these are for CD changers or external additional tape decks sometimes found in vehicles of this vintage. These auxiliary devices (multi-disc cd changers, extra tape decks etc. usually do not work with after market equipment. Assuming the photos are of your truck and it having the On-star and thus Bose radio options ( I don't recall these options being separate) you will need the PAC AOEM-GM21A which allows you retain all the factory features. You can find that here: amzn.to/2NsSJd6

[@DriverJsGarage]

The additional small black connector would remain disconnected in your install as well.

[@P47RICKG]

Thank you so much for your respond, I don't believe my car has bose system and rather just stick stereo, which then means the additional black harness is probably aux/onstar then, I could just leave it. First time I see the frame with the color I wanted, thank you so much, but if I am excluding the aux/onstar harness I need the basic harness for my car, shouldn't be too hard. Thank you so much for your respond :))

[@P47RICKG]

And the shale color looks abit lighter than what I have, i don't know for sure fho, however, it would look disgusting if it's a mismatch, maybe I should safe it and go with black..

[@DriverJsGarage]

@@P47RICKG You could paint either to match more closely if you feel confident with a paint can, and I just went with basic black. While it looks off set from the rest of the dash it isn't terrible. I looked around and couldn't find any information Bose / On star being separate options. I checked every fitment guide online I could find and most said 'on-star w/ Bose' and did not list an On-star option solo so I would assume these options weather mentioned or not are intertwined.

[@freebandzfbg1134]

Damn man explain it to us