Installing & wiring a Double Din Stereo Head Unit - 2002 Chevy Tahoe

[@TahoeSteve]

You can get the stuff in this video on Amazon. See Description above.

[@theresastinson3721]

Hey I dont see a link to order these parts? Did I miss it?

[@TahoeSteve]

@@theresastinson3721 Description above

[@patrickbagnano1561]

Theresa Morgan , no. You did not miss it. He never listed the parts for the Metra dash bezel or the Metra stereo install kit.

[@MoneyManHolmes]

5:12 for the part number

[@juliancervantes6342]

@@TahoeSteve can you do a 2003 GMC Yukon

[@frankmurray9353]

Normally I am not a fan of people talking constantly throughout their videos, but in your case you always explain everything so that a newbie beginner can complete the same task with ease. Keep on posting and we will keep on watching. Thanks

[@TahoeSteve]

thank you so much for your nice comment, and for watching!

[@andrewfranklin3070]

Due to your thoroughness, you could explain how to do something totally different from audio or car products and still do an excellent job. This is one of the best videos I have seen on You Tube. well done.

[@TahoeSteve]

it's comments like yours that keep me motivated to keep making vids. thanks.

[@4gbmeans4gb61]

Ya this video is great, but for me i can hardly hear him.

[@danemaddalena9674]

Clean your ears

[@chadeller7189]

After watching this video I am going to start redoing my 02 Suburban XLT, my wife even wants to help. A lot of history just didn't want to get rid of it since it was used to drive grandparents and parents to doctors. Thank you for showing that anything is possible. Keep it up.

[@TahoeSteve]

thanks so much for watching and for the kind comment.

[@TahoeSteve]

Want just the part on wiring? go to: kzbin.info/www/bejne/hInam4WXqLyVq9Um3s

[@DennisMannBigD]

Holy crap! What a great video man! I've installed basic single DIN aftermarket radios, but the double with all the extras, in a 1.5!! Just great job. For me, I have a 2002 GMC Yukon Denali, same dash and setup. Watching this was extremely informative and points me in the right direction. My direction thankfully is now easier because the head unit I want comes in 2 models virtually the same 7" screen. One is a double DIN, the other single with flip out screen. Deciding from watching your video is the single DIN is $150 more than the double. I'll go with the single because saving $150, I'd spend more on the replacement bezel and few extras, plus, I'm not that crafty and handy as you. I rarely comment on videos, but I had to share how helpful you were! BTW, I'm going with the Pioneer AVH-3300NEX (single) compared to the Pioneer AVH-2300NEX (double). Thanks again - I subscribed!

[@TahoeSteve]

Your kind words mean a lot, these videos are hard to make - so you make it worth it. So glad to be of help, thanks!

[@robfalkner4303]

Hey bro, I have 37 + years as an installer. Air saw is much easier and quicker for cutting the plastic out. Just thought this may help you a lil more in the future ! Blue wire is remote turn on for inexperience ppl... Also, the parking brake wire can be bypassed to give you video, by either bypass chip or just ground to black ground wire if head unit harness.... Great job tho

[@TahoeSteve]

all good tips, thanks!

[@robfalkner4303]

Just trying to help you out some.

[@NeedsLessWedge]

I used a multi tool saw with a cheap square metal/wood blade, to trim the plastic out of the radio cage and it worked well . Battery powered, light way, and adjustable head, with a long read too. Sliced through the cheap plastic like butter with no metal plastic buggers to file.

[@robfalkner4303]

Cool

[@zarachstuber4184]

Excellent description in your videos. I’ve seen almost all of them that have to do with the Tahoe because I have one the same year and package. Super nice to have someone that does multiple vids on things I’d like to do to mine! I always hit up your vids if I need a little extra clarification or just wanna learn something new! Hope you keep going with the vids and keep upgrading the Tahoe! Thanks for all the great info! Now off to upgrade mine!

[@TahoeSteve]

thanks for watchin. turbo video coming soon (i hope)

[@Chronas9.9]

I have to admit this is pretty well done dude, against all odds and obstacles you manage to make it work. I’m going to add a double din touchscreen stereo to my truck as well so can’t wait and this really inspired me to push forward with the idea.

[@TahoeSteve]

thanks

[@krisessmyer3311]

Man I wish I would've seen your video before I tried all the crap I did! It would've saved me a lot of time and another trip to the store!

[@TahoeSteve]

im glad you liked it, sorry you found it too late

[@Reliable1102Intel]

The instructions are pretty handy and are clear about removal of the dash support brace for double din fitment. This is true with all full size cabs in the model year and class your working with. The gm11 interface is a realtime module designed to seamlessly convert from oem stereo to aftermarket all the while retaining vehicle functionality. There is no need or stated direction that requires removal of the climate control module.

[@ashleywilcox8883]

I just sent this to my husband u seem super informative, my husband is ready to kill me as not all colors match and I just had to get a new radio 🤷‍♀️

[@anonjordan3259]

Love the confidence boosters you give. Was a little worried about doing this install before i watched your video. Thanks a ton

[@TahoeSteve]

If I can do it, anyone can. Go for it!

[@anonjordan3259]

Update: Stereo install complete. Thanks again

[@kakarote2277]

Great job explaining the install. I’m doing the same on my 2002 chevy extended cab. Your video was helpful in my decision.

[@TahoeSteve]

So glad it helped!

[@stoneyswolf]

I just installed almost the same head unit in my wife's 04 Dakota. Looks the same newer part number. Wish I could have just purchased a double din dash panel nobody makes them for Dakota I had to make one. Looks good can't tell it's custom just a lot more work.

[@TahoeSteve]

nice!

[@jrodriguez2794]

I’m fixing my 01 Tahoe and deff getting some tips from this video make some more !

[@TahoeSteve]

will do.

[@isaacdonaldson8595]

I did this too my 95 Sierra, I love it. I also bought 2 10s and put under the back seat

[@aidansparks9754]

Isaac Donaldson so this would work for a 02 GMC Sierra.

[@thrillbilly41]

Thanks for the vid. I'm going thru this adventure now

[@teammacucaracing9015]

Good video man was looking for this for my yukon

[@TahoeSteve]

glad you liked it

[@Durbo37]

Thank you so much I thought I was screwed but thanks to you

[@TahoeSteve]

Great to hear, glad I could help.

[@therealKOLOSSUZ]

Best vid I’ve seen...explained the process to the tee

[@TahoeSteve]

So glad to help. Thanks for watching!

[@Odenix75]

Very simple the way you explain it. Thanks

[@TahoeSteve]

thanks for watching and for the kind words

[@DeafViking524]

Great great video. I have a 2002 Tahoe mtself with the 5.3l and will now be subscribing to your channel! Wish the audio wasn't completely muffled and almost silent but other than thst awesome job!

[@TahoeSteve]

thanks for watching.

[@4gbmeans4gb61]

OR YOU CAN use crutchfield and put in what car and everything you have, it will tell you exactly how much space you can and if the radios will fit, they also include if you can mod them to fit. etc. Very helpful info on there. You think its worth it to pay someone 99 bucks to install a double dim, and to hook it all up to nav and steering weheel?

[@ajsnake02]

Great video, and love the billet and blue gauges

[@TahoeSteve]

thanks!

[@R2D2471]

Keep up the good work your videos are helping me out alot I'm doing headers on my 04 avalanche and as well as installing a similar stereo

[@TahoeSteve]

Glad to be of help!

[@thePENATRATORzZ]

Awesome video and explaining the wiring harnesses

[@TahoeSteve]

Thanks so much!

[@joelane5698]

I just put one in it took me two days it looks nice and I use my stock one

[@TahoeSteve]

nice!

[@Mikey-fo8ut]

Very interesting to see how to get a double din in. I see you bypassed the factory amp/crossover at the head level. There are a couple videos that show how to bypass it at the factory amp unit. It’s behind the glove box. Love the new dash bezel and the double bin case. Good to know it fit. Thanks for a great diy video!

[@truckinoutdoors4119]

For anyone watching this I recommend using Sauter/Heat Shrink. Better connection and an all around cleaner look when finished.

[@truckinoutdoors4119]

Great video and tutorial for beginners

[@TahoeSteve]

thanks for watching!

[@gsilveira23]

There is an amp turn on wire on all aftermarket stereos you don’t need to put it in with your switch red power wire but over all good job

[@TahoeSteve]

Thank you.

[@jonniefraz1376]

Great video. Thank you for taking the time to make this video. I am looking to doing an install in my Silverado, and this video will help a bunch. The only thing I can think of is why you did not de-pin the wires that you were not using from the connector instead of heat shrinking the unused wires?

[@makaveli087]

Decent job, man! Its nice to actually see this kit rather than the stock photos. My problem is my truck is the Cadillac. I'd love to double DIN swap being this simple but I just can't loose the woodgrain trim. =( -- Side note, I see they reuse the Auto4WD button in the Tahoes as the Folding Mirrors Button in the Escalade lol. GM really does have about 12 buttons they use everywhere on everything every few years.

[@antoniogriffin7135]

Did you every get the double din for your Cadi? Because I don't wanna lose my woodgrain either!

[@BeatWithBass44]

antonio griffin go to the junk yard and find a 2003 and up bezel with the wood grain. Was just at my junkyard today and saw one

[@BowtieForLife420]

Just found your videos. And watched the blue leds and also the dash cluster face. I'm loving what you're doing and inspired me to go get some leds and get it down. I actually just ordered that dash bezel and it was $160 on amazon

[@TahoeSteve]

thanks so much. keep us updated on your progress!

[@saransiege7653]

I have a single cab Silverado 2002 so I don't have to use the purple or green ones ?

[@jimsmith5882]

Great Video. It's exactly what I have been looking for to install a double din to a din and a half in my 1986 Corvette convertible. Any suggestions would really help.

[@rachetCD]

Some of these are really a pain in the ass. For instance, in my dodge, i had to wire the ignition wire to the cigarette lighter because it simply didnt work when i wired the ignition wire of the truck harness to the ignition wire of the radio harness

[@jakegriep3965]

WhiteBoyWithAnIpod should have ran the red wire with the yellow wire. I had to.

[@kennethwatso9126]

I have the same radio and I just pushed it in with some force and trimmed the dash

[@rashellriddle6508]

Hi I'm confused, watched your video and went and bought the 03-06 bezel, but it's showing a big gap in the bottom of my heater

[@doylelee252]

The kit is for a 2002.

[@orlandolee6666]

Where did you get that gage cluster

[@jose9899]

this video was amazing. so helpful.... best one i’ve seen, and i been watching a lot of them...thsnks !!!

[@TahoeSteve]

thanks for watching

[@jpmechanics6122]

If I would bypass the factory amp could I wire the rear speakers into the harness

[@luischavez1701]

I didn’t know you could fit a double din with a cd player on it for these model of trucks

[@leesimpson277]

real world! done well!

[@TahoeSteve]

thanks for watching!

[@boselman45]

You da man Steve!

[@TahoeSteve]

thanks

[@foxtride7890]

Thanks for this thorough demonstration, just subbed

[@Rnm1hart]

Hey! Where did you get the panel with the double din set up that's, not in your description??

[@NeedsLessWedge]

Thanks for the vid

[@ohgodpleasedont]

Very informative. Thank you

[@TahoeSteve]

thanks for watching!

[@CarlosGonzalez_753]

What if it has a factory amp like bose

[@rudymedina9980]

I have 2 balck ground wires on the wiring harness from my stereo do i connect both to the balck ground from the aftermarket harness.

[@TrevDoggTV]

I have an 02 suburban 2500. I have 2 hookups on the factory radio. I got the adapter plug that you have, did everything I needed to but it won't put sound to my speakers without that second plug. I've seen where you can connect the 2 into one but wires don't match up

[@tcb-_-pureskill1798]

Did you ever figure it out, I’m having same problem

[@TrevDoggTV]

@@tcb-_-pureskill1798 my truck has an 8 disk cd player from the factory that was removed when I got it, however the previous owner added some sort of signal booster under the dash that was tapped into wires it wasn't supposed to be hooked too and that was messing up my speakers. I ended up running new wires and just left the factory wires hooked up. Now, I have read that the amplifier behind the glove box can mess with not getting power to the speakers. Bypass that and you'll be good

[@robertjones1975]

What do you need to make your after market double din with the factory factory tv that come in the 2005 tahoe.

[@TahoeSteve]

pretty sure double din is standard after 2003 or 2004.

[@southboss23]

The antanna wire can count as a source power for the amp as well.

[@SipaSaiyan]

southboss23 not a good idea, many head units will cut power to this wire when not in radio mode. This will cause the amplifier to turn off.

[@jeffersonmanganelli1379]

If you bypassed the factory amp prior to this Double Din Install, would you connect the purple and green wires you shrink wrapped to the same color speed wires if that's was your situation in order to make your rear passenger side and rear driver side speakers to work with the new amplifier you installed?

[@chrislane4039]

Nice bro must be nice to have a little patience I have absolutely none but I was prob in the negative in the patience department in life and I stay working on all my bike and trucks and well I'm not trying t pay extra for things I mishandle during The whole process of the diy life but cool bro good job man

[@josephhatton5601]

Any idea why when i turn my vehicle on i have sound then it just all cuts out? Is that pink wire going to the factory amp to the blue and white wire from stereo harness be my issue?

[@kenn82draw]

I have the same issue.

[@Leatherkid01]

Up to 2:10 , your gauge cluster face is OEM, after that its changed to a brushed metal gauge face .... when are u gonna tell us abt that eh 🤔 Sneaky Steve. Nice instal on both btw 🤣

[@TahoeSteve]

Thanks. It's been a while, but these things got videoed concurrently. Here's the link to the other video kzbin.info/www/bejne/j4u4Xoxuiph0jNU

[@sean.g4516]

Time for backup camera now ​@@TahoeSteve

[@remainloyaltoyour0wnsoil580]

🗣Tahoe Steve The LEGEND🔊

[@TahoeSteve]

thanks

[@richardgharing2925]

sir was the only reason you pulled the stereo cage out was to cut out for wire running other then that the double din fit in location with the new trim thank you

[@TahoeSteve]

If I remember correctly, yes

[@alexis_1503]

where would i ground the black wires at any suggestions ? inside the dash

[@courteousanalyzer]

Lmao I also keep a dollar in the cassette organizer

[@TahoeSteve]

you never know, right?

[@courteousanalyzer]

@@TahoeSteve thanks for all your help!!

[@danefritz3166]

Hey Dude, I have a 2002 Chevy Suburban. Am I correct in assuming everything you have purchased here would work for me? Thanks for the video. I'm excited to try this out.

[@TahoeSteve]

Yes. Thanks for watching

[@jimt.9227]

I am surprised you did not have to cut the rear steel brace. Your head unit must be shorter than all the ones I've seen other people do videos with because they all had to cut the rear brace to accommodate the head unit. Is yours not a CD/DVD unit? I've seen comments that mention they are not as deep in the back.

[@TahoeSteve]

you are correct, it is a CD/DVD unit and it just barely gets in there, but it did! no cutting necessary.

[@atmosrepair]

Thank you for great video. If a guy were to simply replace head unit and speakers without amp or sub, do you know how much power the stock head was sending to speakers? How much power double din sends to speakers? Just curious because speakers I am looking at can take up to 35 watts, and if head sends very low power, I am wondering if I would even notice a difference! I am in the old body tahoe 1999.

[@TahoeSteve]

Replacing the speakers alone will make a difference you can hear. Factory stuff is trash. Replacing the head unit will also help and give you more modern music options. As for power, everything comes with power ratings on the box.

[@AppSkii]

Just to let you know, your city/town is on the box when you show the box you got parts from. Only reason it caught my eye is Freemans Audio on Cherry Road.. How much did the parts cost from them? lol We live in the same city man

[@TahoeSteve]

Good eye, I didn't notice that. I think the Metra was $160.

[@AppSkii]

I went to Freemans, They told me $220 plus mounting bracket. I ordered the Metra and bracket all for $115 on eBay. Great video man i done step by step so far best video for double din aftermarket radio in a din 1/2

[@TahoeSteve]

AppSkii $220 seems kind of steep. I think he gave me a discount because I bought the head unit and amp at the same time

[@AppSkii]

I ordered it online for $120 i wasnt going to waste money over 3 day shipping lol

[@joshuaturner5173]

Any chance you could put the links in if possible man. I have a 2001 Tahoe and I think I might do the same. I wanna get an Android double din and also change out the LED on the cluster

[@TahoeSteve]

i bought mine locally because i could not find them online. hope you have better luck. you can get a 2003+ from a junk yard for very cheap, but you will have to do a bunch of fab work around the A/C stuff below the double din.

[@jorgedelgado3310]

Great job what wire cutters are you using those things are sweet

[@TahoeSteve]

got them from harbor frieght

[@britneebruhn9237]

So is that bezel and the one from a 2003 Denali different sizes it don’t seem to fit right no access to ash tray either it’s blocked from the bezel

[@TahoeSteve]

The aftermarket bezel fits nicely but is expensive. Getting one from a junk yard is much cheaper but will require a little modifying.

[@violater7026]

Sony xav has a screen but is really single din multi media

[@fjuribe1]

What size is the car stereo?

[@chevyboy2066]

Ya get it used cause you’ll have to still make a few small cuts. Bezel, stereo harness and save the screws and ur good. I paid $25 for it all

[@TahoeSteve]

Totally makes sense if you can find one in good condition.

[@voguetyreturner]

So you can use your stock radio cage with this kit?

[@cjsptg2011]

I have a 01 Yukon and going to let car toys install a double din what do I need to buy so they can do the job?

[@juangomez4185]

is this the same thing as if would to be connecting on 2000 gmc yukon slt

[@jacobburgoni2412]

Juan Gomez yes

[@robertphillips5961]

Where did u get your cluster gadges. I like the layout

[@TahoeSteve]

Amazon - amzn.to/2M0rXVL

[@albertoraya3751]

So you cut the pink wire from the car harness and attached it to the stereo harness?

[@jeepinon35s]

did you have to do anything for the on star i know my 2005 i had to do all kinds of stuff. but i just got a 2002 gmc sierra and want to add a double din. thanks

[@TahoeSteve]

my onstar has been disconnected since year one, so if i "broke" it - it's no loss.

[@atmosrepair]

Fairies wear boots and you gotta believe me!! I saw it I saw it with my own two eyes!!

[@TahoeSteve]

i believe you

[@SirhC87]

I put a planet audio 8inch and amp set up in my 2004 Tahoe but I had to get the back panel and the box from a earlier year because 2004 they quit putting the sub back there it worked fine sounded okay but the box sucks I think it needs needs to be ported the stock Bose system sounded better in my opinion but it's cool to customize stuff and save space good video

[@1goldsoul]

Great video, I have a 2002 Cadillac escalade very similar setup, would this work for me? I still have the factory radio

[@TahoeSteve]

not sure. if you have a Bose system, it might be different.

[@1goldsoul]

Thanks for responding

[@TicTacToe12345]

looks good, good job. im having issue's with my double din, the mount kit for my dash doesnt line up with any hole on my stereo. if anyone has any suggestions feel free to let me know. 2013 kia optima with a 7" boss audio 2 din

[@AlonteGray]

Hey i know this video is old but can you do a video on how you ran the wires from the radio all the way back to the amp, also installing the 8 inch sub and amp?

[@TahoeSteve]

i have several

[@softailgarage]

You didn't have to mess with that metal bracket in the back that supports the dash?, I take it the new bezel came out a little further?

[@TahoeSteve]

I did not. Just moving all the wires out of the way was enough to get the new radio in.

[@jayycorona4387]

that dash bezel is nice. how much did it cost?

[@marioimaginee2632]

What kind of harness was used?

[@TahoeSteve]

I don't recall. Google it using your year, make, model

[@barrymonroy7138]

Really nice cluster..

[@TahoeSteve]

thanks!

[@matlock253]

Did you do the camera? I have one hooked up but does. Or come one when I I hit the button.. Only reverse.

[@TahoeSteve]

I should have. Now that everything is together, I'm gonna leave it for now.

[@jasoncovert9051]

I have the same truck but I can't keep memory on my stereo and I don't have the blue and white wire for the amp where does the amplifier hook up to

[@JoeCaudillo999]

hey I have 2001 chevy Silverado and was wondering if that bezel will fit in it because I have a guy who works for a car ad stereo shop who is trying to say you cant put a double din in it even though it is the same setup you got?

[@karsonmontgomery2861]

USMC MASTER FTW you can but just like him you have to buy the same thing he did, I have a 2001 Silverado too with it

[@JoeCaudillo999]

Karson Montgomery I have the JVC KW BT with cerewin Vega pros is that a good combo ?

[@patrickjutz7739]

Well done besides solder

[@curtisowinfrey4375]

I have a question in terms of bypass the factory amp if I run the speaker wires directly to the 4 channel amp will it work or is there a specific way to bypass the factory amp

[@TahoeSteve]

did you see this? kzbin.info/www/bejne/mXLIYpmFrbaYg5I

[@buttercupmhr]

I've been following for the last week and been inspired to get my brother and myself of some projects for my 2005 Z71. What crimper/stripper did you use? Next I'm going to change the lights on my dash also!!

[@TahoeSteve]

Bought a cheapo one from Harbor Freight, but it works great!

[@buttercupmhr]

AVT Marketing ok thank you much

[@tonytonez5561]

NaturallyButtr'd. Did u end up doing it thats wat u was gunna do also bought kit on ebay

[@natepalazzolo8411]

Hey great video and nice job explaining everything in detail. It's really helped me out a lot!!! I just have a question. When installing the radio, did you have too make any cut outs into the medal bracing bar in the back? I'm doing a similar install with the Metra DP-3002B for my double din Appradio 4 but on a 02 Suburban. I can't seem to get my radio with the side brackets to slide all the way into the clips on the factory cage, it sticks out and I can't put the trim piece back on it doesn't go flush. Please let me know, If you have any tips or any advice.

[@TahoeSteve]

@Josh Chess - Thanks for your comment. I did not have to cut the metal brace at all. You see the large wire bundle starting around 3:19 - The trick for me was tucking this behind the radio cage when I put it back in later in the video. I wish I had made that clearer in the video but hindsight is 20/20.

[@natepalazzolo8411]

AVT Marketing Okay awesome!! Thank you for getting back to me. I'll try my best to tuck all the wires behind the medal cage then and make everything fit. Great videos keep up the nice work👍🏼👍🏼.

[@tonygonzalez7029]

Quick question...u know how your radio stays when u turn your car off and it shuts off once the door is open....do u happen to know what fuse that is...mine turns off when I turn the car off...it used to stay on...I know I messed up...I had to tap in to the fuse box....

[@nickrobb7719]

you have to find the accessory wire red most of the time and hook it up. you can just have a constant 12.so either tap into another fuse that has power when the key is off and run it to you wiring harness to the red wire

[@barrymonroy7138]

Where did u get that gauge cluster kit ???

[@rafaelmanuel9522]

any tips what I did wrong?... the speaker wires/ground and rca were installed by the previous owner

[@TahoeSteve]

I would double check all the connections to make sure they are correct.

[@saldav420]

I have a question on a 2004 suburban, I have Bose system and I know those have a separate amp, is their a difference in installation from video, I'm going with a double din Kenwood kinda like yours actually, I'm installing an amp and a sub as well. Let me know what you think. Thanks great videos 👌

[@TahoeSteve]

I'm pretty sure it is different. Hopefully someone with an 04 will chime in.

[@saldav420]

@@TahoeSteve I did some research and yes it's different, I would need to put a accessory wire to power the stock amp, in my case it's to connect the blue "antenna" wire from the wire kit harness to the accessory wire. I'm going to try that today. Will keep you posted brother Steve, and thanks for your quick response. ✌

[@dylanjk5946]

so do u need to cut the cage to make the actual double din fit

[@TahoeSteve]

if you mean the large metal bracket - no i did not, however, it depends on how big of a head unit you buy

[@dylanjk5946]

thanks

[@seanbirge5081]

Exactly what kenwood head unit did you install

[@jesustraviezo8852]

Kenwood excelon ddx394